Easy Wood Projects To Build | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable thoughts and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a few petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, she’s also an educator and a member of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they are following because most of the ideas and projects Ted’s resource are easy to comprehend and easy. Ted McGrath spent two years researching so that he could collect enough material for a comprehensive package, and he ended up making a truly’complete’ woodworking source.

Many may still appear unsure if they should be purchasing Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it even more difficult to make the right option. There are actually lots of things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit from Ted’s woodworking Package. People that are only getting started will find the thoughts and jobs in Ted’s package quite easy. No doubt, complicated carpentry is demanded; however, they will find it really easy to follow Ted’s simple step by step instructions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source that will help beginners learn a whole lot about woodworking. They will also be able to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers are going to be able to locate any job of their choice within this bundle quite easily, though there numerous choices.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and people who buy it will be backed by a 60-day warranty, so when this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long period to down due to its large size. Nonetheless, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering the fact that this package is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so comprehensive and vast it contains just about every woodworking project a woodworker may be interested in constructing.

This woodworking package created by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking bundles that are available throughout the internet. Ted has done his best to direct them in every conceivable way he could, through easy to understand textual instructions, clear images and even movies too.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find inside. Therefore, it’s definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more innovative hand tools and more woodworking power tools , but the concept is to purchase the essential hand and power tools that beginners will need. You may always add to your toolbox as you gain experience!

Easy Wood Projects To Build Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to complete your project. But if you’re unsure about what to do there is help available! There are several areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of those several woodworking magazines out there. Every month the authors in woodworking publications do a story about the best way best to improve your woodworking craft. When it is showing you the way to apply an end to a finished project, or how to make a mortise and tenon joint, something new could be learned every month. Next, is purchasing instructional DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to use a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Easy Wood Projects To Build

If you’re just beginning and very interested in doing a DIY job for house afterward, woodworking can be fun. If you do not have the proper information, education, and ability, you might land up spending more time and money than you initially meant to spend. As a novice woodworker, you need to have space, time and the correct tools. Having mentioned, there are a couple of essential factors you need to keep in mind, before starting with any woodworking project.

1. If you are just beginning, you must first have to be somewhat interested in woodworking. Creating something new with your own hands is a particular sense. Do not begin a job if you are not interested, as this may land you at a bad place.

2. Consider the primary reason for making this woodworking project. Decide on the uses of the thing you’re making.

3. Consider your skills and analyze the time you have, before you start with a project.

4. Start projects that you can finish. If you are in the middle of some work, then it’s better not to begin any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Easy Wood Projects To Build

If you maintain those essential points in mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires preparation as much because it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to choose the woodworking projects that you wish to begin with. As a newcomer, always pick a project that has quite a basic build up or a simple structure. A few easy to start projects include, bird feeder, benches, shelves, etc.. The moment you find these techniques, you can always proceed to the next level of woodworking jobs, like cabinets, sheds, and others. Beginning projects should always keyword be less complicated and less bothersome so you have a better comprehension of working with woods and their tools. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Easy Wood Projects To Build

Tools are the means through which you can win the struggle of woodworking. Many people think that power tools are needs. But for novices, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would demand are:

1. Workbench – A workbench is needed for precise cuts and dimensions. Even the workbench, when mended with vises, offer ample space to work. As a key tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer can make things much simple for you. When you purchase a hammer, constantly check the equilibrium between the weight and endure. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool can help you to cut woods at different sizes. There are various sorts of saws out there in the market. Choose a size that you could deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them will help you in advance woodworking. You can also purchase keyword power screwdrivers as they make the work much faster.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape helps you to quantify wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you require a wrench. Nonetheless, this isn’t a tool for beginners, but having it would make work simpler for you in a later stage.

7. Drill – Drill makes it possible to make holes in timber. Low wattage power drills will make the task much easy.

8. Other small and fundamental tools – These include pens, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is not any fixed cost on woodworking projects. Based on the sort of job you would like to finish, pricing can be determined. The easy the job, the less cost it involves. However, at the beginning buying the tools will probably be a little hefty. Therefore, it’s much better to fix a budget first on the tools, then keyword on the project. Purchasing the fundamental tools will make certain you don’t need to buy any more material other than the timber ply.

Time and Instructions

Instructions are among the primary things that each and every beginner should follow. Instructions manual is quite simple to comprehend the procedure, what to do and the way to get it done. It keyword is a systematic guide for finishing the project. Time also has an important part in the construction of woodworking jobs. Woodworking projects require time and so it’s necessary for a beginner to have ample quantity of time every week.

Ideas for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most indispensable thing keyword which will allow you to reach success is proper planning. With appropriate planning and a plan, it’s likely to achieve success immediately. If you know the purpose of woodworking, then the thing that you want to construct, the resources you require in order to possess and the typical time it’s possible to devote daily; then you’re all set to go.

Conclusion, Easy Wood Projects To Build

All these strategies and education is likely to make the woodworking projects and plans for novices fast to finish. Always make sure that you have all of the essential tools, materials, space prepared. Read the instructions for constructing an item handy. Proper strategy and planning can allow you to earn a great woodworking project for your property.

|

Starting Your First Woodworking Shop Easy Wood Projects To Build

Folks when trying to find a way to pass time or want an alternate way to generate money they usually turn to a hobby they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are a lot of jobs one can consider. When starting out you need to be quite careful when choosing which job to begin with since you will find projects which can be too difficult for a newbie. But do not worry about that since we are going to provide you guidelines on the right way to start woodworking as a newcomer.

The same as any other hobby woodworking demands some working gear, therefore before you pick your project you need to know whether you have the available tools to work on that job. Try not to spend a lot of cash on purchasing gear when starting out, buy more gear as you get more experience and become a professional carpenter. If you enjoy your hobby then there will be no difference between the hand as well as the normal hands.

The Benefits of Woodworking Easy Wood Projects To Build

To keep yourself updated you have to disseminate with different brands tools and woods. Woodworking in your home will provide you time to research different jobs and learn a lot of things. That is why it’s very important to spend less money when starting out so you can afford to make errors and at any time learning about various projects.
It is very important that you know more about different types of wood available for creating jobs. Expect carpenters utilize several kinds of wood quality for decorating bits, learning what kind of wood that they use will help you prepare the wood you’ll need for certain projects you might choose to pursue.
As soon as you know the basics of wood choice and the usage of different tools you can now employ them in cutting well wood pieces and putting wood together. Knowing what to do will help you in building good jobs to satisfy your wants.

Easy Wood Projects To Build practice makes perfect so make sure that you practice your work daily if at all possible. Try out lots of layouts utilizing various tools so you may get the hang of using the tools. When starting out you may earn a number of mistakes but with time you will learn how to properly use them and produce quality projects.

|

Starting Your First Woodworking Shop Easy Wood Projects To Build

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You may get started on a shoestring with a minimal amount of gear and equipment. A little home workshop may produce a wide variety of simple projects which will allow you to develop your creative and construction abilities while rewarding you with practical and artistic wood products that you can appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let’s talk about where you’ll perform your woodworking, based on the size of your house, you may have the ability to create a dedicated space to your woodworking activities. This may be a reserved spot on your garage or on your basement. In some cases, a detached shed or outbuilding may be ideal to set up your very first store. A heated store detached from your house offers one distinct advantage: better pest management. Without complex dust control systems, basement workshops will inevitably produce dust which travels to the living area of your house. This is particularly true in homes with forced air heating systems where cold air yields found in the basement draw up dust into the top levels of the house. Another benefit of detached workshops is, of course, the noise level. You can work without bothering the rest of the household. A fantastic compromise might be the garage of your home.

This might help minimize the difficulties of dust and noise, however depending on where you reside, a keyword garage workshop might not be practical during extremes of hot or cold weather.

The Benefits of Woodworking Easy Wood Projects To Build

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes they include more space to work in. Easy Wood Projects To Build if you’re able to have a dedicated place for a workshop all the greater. Floor tools and bench top equipment can stay in position from project to project. If this installation isn’t impossible, at least attempt to create a bench area where equipment could be saved and pulled out as needed. If possible plan for inevitable expansion as you acquire more tools and gear. In the beginning, set up a seat area where you can shop and use most of your gear, using a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. This will let you work comfortably while standing. Insert a sturdy shelf below the bench to home your hands power tools along with a pegboard above the bench to hang other equipment. Put in a woodworking at one end of your seat on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Easy Wood Projects To Build

The reach of your startup equipment will be mostly based on your budget. Whether you have got large financial resources or you are starting on a shoestring consistently purchase quality equipment. If you can afford it, then buy your quality tools in your local construction and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or alternative local ads. You will find plenty of quality lightly used tools out there which belong to people who embarked on that 1 molding job around the house or obtained tools as gifts which they will never use. You can usually purchase tools for these sellers for less than half the initial price and save even more money if you create a package deal for all their unused equipment. Obviously, getting tools from private individuals will require additional time and possibly travel expenses. Weigh out the advantages of traveling around town to save a couple added dollars on a cheap piece of equipment. The extra expense of time and travel in these scenarios is usually justified when buying large ticket items like table saws, bandsaws or large finished tools like surface planers later on.
For smaller acquisitions, a visit to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal quantity of hand equipment yet generated sophisticated and complex pieces. Focus on developing your abilities with your start-up set of resources and prevent lamenting about the gear you wished you’d.
Here’s a checklist of the useful tools You Will Need to get started:
Safety Equipment: Start as expected by eye protection. Get a nice pair of safety glasses that also offer you some side protection to your eyes. Buy a quality acrylic set that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually impair your vision and affect security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up fast. You can avoid wearing them all together in the event that you find them uncomfortable.

The next bit of critical safety equipment you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking may be noisy and long-term exposure to these sound levels may affect hearing and result in tinnitus and other hearing losses. With this set up I am shielding my eyes and my ears. I am keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw following the favorite name, this can end up being the most versatile tool in a start-up workshop. In fact, at the hands of a professional, a power hand saw could be employed to construct an whole property. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you even start your next job. After choosing the proper saw put in a quality blade. Most saws include a starter blade of lower quality even if they are a fantastic saw. Keep this blade for a backup and install a quality blade with carbide teeth. Begin with a hybrid blade. These have a balanced tooth count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument cannot just cut curves. It is ideal for cutting holes in timber too like handle slots. At some point, you’re going to want to obtain a ring saw. Bandsaws are much more versatile but a excellent floor unit can be costly. A jigsaw can be a fantastic stop gap for the novice woodworker.

Purchase an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch version. Down the street, the 1/2 inch version will prove to be versatile. Through tough lessons learned, I have discovered that purchasing quality, in this scenario, is much more crucial than ever. Cheaper drills tend to have very short run times and have to be recharged often. Their battery life will be poor and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you do not want on your workshop. Purchase an range of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning every drill bit to its potential slot at the holder after each use. Lastly, get a pair of tough steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer stays as the most flexible tool in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop injuries occur. Even though the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and features a comfortable grip. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood handles with poor joints between the handle and head. The mind usually comes loose and the tool becomes useless. Select a name brand quality hammer at the 16-ounce range for general work and a smaller finishing hammer for more intricate work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more suited to rough framing tasks and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can manage pretty much any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you will likely upgrade to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you might find that your palm sander using a little bit of effort can change rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and shape rough planks with 100 grit paper and after finish your job with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets with an extra source of 100 grit paper. You’ll find this grade of paper that the most versatile in your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Though low tech in theory, these tools allow you to taper borders, sew high stains and correct any imperfections in timber pieces. {Start with a typical number 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold off your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it usually requires the beginner woodworker a couple of years to accumulate a detailed set of wood clamps. Begin with a pair of extended”pipe” clamps. Now the pipe was replaced with extended steel shafts, however, the structure remains the same. Get a set of the longest clamps which you can afford. You may get in touch with them for smaller glue jobs and expand them to their entire length for larger jobs.

Shop Vice: A store vice installed at the end of your seat is perfect for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices using their wood clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enable the consumer to quickly open and close the jaws without tedious handle turning. The timber beamed surfaces in your vice will occasionally require replacement. I would rather use soft pine in my vices which will not crush or damage lots of the various forests that I utilize. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be among the most often used tools. Purchase a good excellent name brand tape measure with a wide tape typically in the 25-foot selection. Although in your shop you might not use the tape at these lengths, the bigger tape measures offer more rigid tapes that will not flop around and slide off the end of boards. Measuring when you’re on your own will be a great deal easier, and of course, quality tape steps can last for many years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will require additional sanding. Avoid oversize carpenter’s pencils. Their big flat leads are simply too coarse for precise measurement in the workshop.

Additional Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools can help you in marking the ideal angles as well as chemical angles. Additionally, get an range of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find the Robertson format works best for many woodworking jobs and is the most compatible with a drill powered bits. Last, get a pair of 12-inch wood documents. The cost of glue through all of your projects is a little cost consideration. Therefore, it is sensible to go with the best. I have also discovered over the years that I receive the best results with both indoor and outdoor projects once I use quality outdoor grade glue. These resin-based compounds unlike conventional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Easy Wood Projects To Build

The peaceful satisfaction of woodworking is an excellent experience in this era of hurried lives, smartphones, and time-starved careers. With a minimal investment in the most basic equipment and tools, anyone can learn the rewarding skills of his time-tested avocation and revel in project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

List of Bob the Builder characters

Video: Woodworking Tools