Easy Wood Projects To Make And Sell | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable ideas and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and some of those qualities along with a few petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, himself is also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking when they’re following because most of the thoughts and projects Ted’s resource are easy to understand and simple. Ted McGrath spent two years exploring so he could gather enough material for a comprehensive bundle, and he ended up creating a really’complete’ woodworking source.

Many may still seem unsure whether they need to be buying Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it more challenging to make the right choice. There are actually lots of things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to profit from Ted’s woodworking Package. Those that are just getting started will discover the thoughts and jobs in Ted’s package quite easy. Without doubt, intricate carpentry is demanded; nonetheless, they will discover that it’s really easy to follow Ted’s easy step-by-step directions. Currently, both beginner and experienced ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers are going to be able to locate any project of their choice in this bundle quite easily, though there numerous choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who buy it will be backed by a 60-day guarantee, so if this woodworking package fails to satisfy them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down because of its large size. Nonetheless, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans in Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nonetheless, they didn’t mind being overwhelmed considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast that it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking bundles that can be found throughout the internet. Ted has done his best to direct them in every conceivable way he could, through simple to understand textual directions, clear pictures and even videos as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking projects they will find inside. Therefore, it is certainly worth buying!

Finding Woodworking Projects and Plans for Beginners Easy Wood Projects To Make And Sell

Woodworking is one hobby that could also be a rewarding profession if you like to work together with your hands and construct exquisite pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a nice woodworking craftsman, you’ll be able to build all kinds of furniture, (beds, table, and chairs), effortlessly. After that you can sell your completed woodworking jobs and make a handsome profit. Easy Wood Projects To Make And Sell.

It takes time to become skilled in the craft of woodworking. The nice thing about working up to that expert craftsman level is you’ll have the ability to create some really nice furniture to you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit on your living space. It’ll be a subject of conversation whenever you have friends come over to see. They’ll ask: How can you make it? How long can it take to finish the job? What type of tools did you use? Just how on earth did you make such a beautiful piece of furniture? As you speak about your work, a feeling of pride will come over you and also do not be surprised if your friends ask you to make one for them too!

How to Become a Master Woodworker From Your Own Home Easy Wood Projects To Make And Sell

If you’re thinking you are too old or too young for woodworking, think again! You’re never too old or too young for such a fun hobby and it is ideal for beginners!

Where to Begin in Woodworking? Easy Wood Projects To Make And Sell.

Start with an idea in mind of what you want to construct and then get a really good woodworking project plan that’s geared toward beginners. There are numerous small woodworking projects for novices available for purchase from online woodworking merchants. A few woodworking plan suggestions for you thinking really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child simply to name a couple. Obviously, you can start out with as grand a woodworking plan as you pick. However, the odds are if you begin with a small woodworking project initially, you will get a better chance of keyword completing the project.

Your woodworking project plan should incorporate some lists! Length of: woodworking hardware, the amount and variety of wood needed, and the essential hand tools and power tools to finish the project. Note: A word of warning about purchasing woodworking tools. Just buy what you need to complete your instant or upcoming endeavor. This is important especially if you are a beginner and just beginning. Tools aren’t cheap. The beginner needs good woodworking gear, but it is simple to break the bank purchasing a great deal of tools you might not use all that frequently. If you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and don’t overlook that the wood glue and a brush to spread the wood glue! Obviously, you will require a dry place to work and might require a set of horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more woodworking hand tools and more woodworking power tools here, but the idea is to buy the crucial hand and power tools that beginners will need. You can always increase your arsenal as you get experience!

Easy Wood Projects To Make And Sell Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you’ve purchased your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. However, if you are not certain about what to do there is help available! There are lots of areas that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of the several woodworking magazines out there. Each month the writers in woodworking publications do a story on the best way to improve your woodworking craft. Whether it is showing you the way you can apply a finish to a finished project, or how to create a mortise and tenon joint, something new can be heard each month. Next, is buying educational DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to work with a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Easy Wood Projects To Make And Sell

If you’re a beginner and very interested in doing a DIY project for house afterward, woodworking could be fun. If you do not have the proper information, education, and skill, you may land up spending more time and money than you initially meant to spend. As a novice woodworker, you want to have time and the appropriate tools. Having mentioned, there are a couple of essential factors you need to keep in mind, before beginning with any woodworking project.

1. If you are a beginner, you should first have to be very interested in woodworking. Creating something new with your hands is a special feeling. Do not begin a job if you’re not interested, because this might land you in a terrible location.

2. Think of the main reason behind creating this woodworking project. Choose the uses of this thing you’re making.

3. Consider your abilities and analyze the time that you have, until you start with a job.

4. Start projects which you can finish. If you’re in the midst of a work, then it’s wise to not begin any project at all.

Finding Woodworking Projects and Plans for Beginners Easy Wood Projects To Make And Sell

If you maintain these vital things in your mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires planning as much because it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to opt for the woodworking projects that you wish to begin with. As a beginner, always select a job which has a very basic build up or a very simple structure. A few simple to begin projects comprise, bird feeder, chairs, shelves, etc.. The moment you get hold of the techniques, you could always proceed to the next level of woodworking jobs, like cupboards, sheds, and others. Beginning jobs should keyword be less complicated and less bothersome so you have a better knowledge of working with woods and their resources. When the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Easy Wood Projects To Make And Sell

Tools would be the means whereby you will win the struggle of woodworking. A lot of people believe power tools are requires. But for novices, basic hand tools can be quite convenient and more than useful in completing a job. If woodworking is the hobby, then some tools that you would require are:

1. Workbench – A workbench is needed for precise cuts and dimensions. The workbench, when fixed with vises, offer ample space to work. As a key tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer can make things considerably easy for you. When you purchase a hammer, constantly check the equilibrium between the weight and stand. Always pick a hardy, yet lightweight item.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool helps you to cut woods at several sizes. There are different types of saws available in the marketplace. Decide on a size which you could deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them will help you in advance woodworking. You can even purchase keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape gives you the capacity to measure wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you demand a wrench. Nonetheless, this is not a tool for novices, but having it might make work easier for you in a later stage.

7. Drill – Drill makes it possible to create holes in wood. Low wattage power drills will make the job much easy.

8. Additional small and basic tools – These include pens, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is no fixed price on woodworking jobs. Based on the type of project that you would like to complete, pricing can be set. The easy the job, the less price it involves. However, at the very beginning purchasing the tools will probably be a little hefty. Because of this, it’s better to resolve a budget first on the resources, then keyword on the project. Buying the fundamental tools will make certain you don’t have to buy any more material other than the wood ply.

Time and Instructions

Instructions are one of the principal things which each and every newcomer should follow. Instructions guide is very easy to understand the process, what to do and the way to get it done. It keyword is a systematic manual for completing the project. Time also plays a significant part in the construction of woodworking jobs. Woodworking projects require time and so it’s necessary for a beginner to have ample quantity of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. Nevertheless, the most indispensable thing keyword that will help you to achieve success is proper preparation. With proper planning and a plan, it is possible to achieve success immediately. If you understand the purpose of woodworking, then the item that you want to construct, the tools you require in order to own and the average time you can give daily; then you’re all set to go.

Conclusion, Easy Wood Projects To Make And Sell

These strategies and education is likely to create the woodworking projects and strategies for beginners fast to finish. Always ensure that you have all of the essential tools, materials, area prepared. Keep the instructions for building an item handy. Proper strategy and planning will allow you to earn a fantastic woodworking job for your home.

|

How to Become a Master Woodworker From Your Own Home Easy Wood Projects To Make And Sell

People if you’re looking for a way to pass time or want an alternate method to make money they usually turn to a hobby that they enjoy. It’s very exciting to do and anyone can get started.

When doing woodworking at home there are lots of jobs one can consider. When starting out you have to be very careful when choosing which project to begin with because there are jobs which may be too difficult for a beginner. But do not be concerned about that because we are going to give you tips on the right way to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working gear, therefore before you choose your job you have to be aware of whether you’ve got the available resources to work on such a job. Try not to spend a good deal of money on purchasing equipment when starting out, purchase more gear as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there’ll not be any gap between the hand as well as the hands.

Starting Your First Woodworking Shop Easy Wood Projects To Make And Sell

Woodworking in your home will give you time to research different projects and learn so many things. That is why it’s very important to invest less money when starting out so you can afford to make errors and at some time learning about different projects.
It’s extremely important you know about the different types of wood available for making projects. Expect carpenters use different types of wood quality for decorating pieces, learning what type of wood that they use can allow you to prepare the wood you’ll need for specific projects you might choose to pursue.
Once you know the fundamentals of wood selection and the usage of different tools you can now implement them in cutting well wood pieces and placing wood together. Knowing what to do will assist you in creating good projects to satisfy your wants.

Easy Wood Projects To Make And Sell practice makes perfect so be sure that you practice your work daily if possible. Try out a lot of designs using a variety of tools so you can find the hang of using the tools. When starting out you may make a number of errors but with time you will learn how to correctly use them and create quality projects.

|

The Benefits of Woodworking Easy Wood Projects To Make And Sell

Woodworking as a hobby can be one of the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimal amount of tools and equipment. A little home workshop can produce a broad array of simple projects that can help you develop your creative and construction abilities while rewarding you with practical and artistic wood products which you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let us discuss where you will perform your woodworking, Depending on the size of your home, you might be able to produce a dedicated space into your woodworking tasks. This might be a reserved spot in your garage or in your cellar. In some cases, a detached shed or outbuilding might be perfect to set up your very first shop. A heated shop detached from your house provides one distinct advantage: better pest management. Without sophisticated dust control methods, basement assignments will inevitably produce dust that travels into the living area of your home. This is particularly true in homes with forced air heating systems where cold air yields found in the basement draw dust up into the upper levels of the house. Another benefit of detached workshops is, clearly, the noise level. It’s possible to work without disturbing the rest of the family. A good compromise might be the garage of your property.

This can help decrease the difficulties of dust and noise, however based on where you reside, a keyword garage layout might not be sensible during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Easy Wood Projects To Make And Sell

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes that they add more space to function in. Easy Wood Projects To Make And Sell if you can have a dedicated place for a marathon all the better. Floor gear and bench top equipment can stay in position from project to project. If this setup isn’t hopeless, at least attempt to create a bench area where equipment could be stored and pulled out as necessary. If possible plan for inevitable expansion as you acquire more tools and gear. In the beginning, set up a seat area where you are able to shop and use the majority of your gear, with a temporary expansion of your activities onto the basement or garage floor.

A basic workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. That will let you work comfortably while standing. Add a sturdy shelf below the bench to home your hands power tools and a pegboard above the bench to hang other gear. Install a woodworking vice at one end of your seat on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Easy Wood Projects To Make And Sell

The scope of your start-up equipment will be mostly based on your financial plan. Whether you have got big financial resources or you’re starting on a shoestring consistently buy quality gear. If you can afford it, buy your quality tools in your regional construction and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or other local advertisements. There are plenty of quality lightly used tools out there which belong to individuals who stumbled on that 1 molding job around the house or obtained tools as presents which they will never utilize. You can usually buy tools for all these sellers for less than half the original price and save even more money if you make a bundle deal for all their unused equipment. Of course, acquiring tools from private people will take additional time and perhaps travel expenses. Weigh the advantages of traveling across town to save a few extra bucks on a cheap piece of gear. The excess cost of travel and time in these situations is usually justified when purchasing large ticket items such as table saws, bandsaws or large ended tools such as surface planers later on.
For smaller acquisitions, a trip to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal amount of hand gear yet generated sophisticated and intricate pieces. Focus on developing your skills with your start-up set of tools and avoid lamenting about the gear you wished you’d.
Here is a listing of the more useful tools you’ll need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer you some side protection to your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually hamper your vision and influence security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up fast. You can avoid wearing them all together if you find them uncomfortable.

The next bit of critical safety equipment that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking may be long-term and noisy exposure to these noise levels may affect hearing and lead to tinnitus and other hearing losses. I am keeping the dust from my hair. I’m good to go!

Power Hand Saw: Often known as a skill saw after the favorite name, this can end up being the most flexible instrument in a start-up workshop. In reality, at the hands of a professional, a power hand saw could be used to build an whole property. At some point, you’ll want to purchase a table saw, but for now, a power hand saw for the woodworker on a budget enables him to perform cross cuts, rip cuts and even elaborate angle cuts. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. These are inclined to cut inaccurately and will burn out before you even start your next job. After selecting the right saw put in a quality blade. Most skill saws come with a starter blade of lesser quality even if they are a fantastic saw. Keep this blade for a backup and install a quality blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will add excellent versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument can’t only cut corners. It’s ideal for cutting holes in wood too like handle slots. Eventually, you’re going to want to get a ring saw. Bandsaws are much more versatile but a quality floor unit can be expensive. A jigsaw can be a fantastic stop gap for the novice woodworker.

Purchase an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the standard 3/8 inch model. Down the road, the 1/2 inch version will prove to be versatile. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is more critical than ever. Cheaper drills tend to get very short run times and need to be recharged frequently. Their battery life will be bad and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you do not need on your workshop. Buy an assortment of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Create a habit of returning every drill bit to its prospective slot at the holder after every use. Last, get a set of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most flexible instrument in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the one tool where most workshop accidents happen. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and comes with a comfortable grip. Most hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood grips with inferior joints between the head and handle. The head typically comes loose and the instrument becomes useless. Pick a title brand quality hammer in the 16-ounce scope for general work and also a smaller finishing hammer for more complex work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These kinds of hammers are more appropriate for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can handle just about any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you’ll likely upgrade to a floor model disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up borders, cross cuts and even limited quantities of surface area. As you embark on the first few projects you’ll find your palm sander using a bit of effort can transform rough looking creations into virtual functions of art! You can use your palm sander to sand and form rough planks using 100 grit paper and later finish your work with 200 or even 300 grit paper. Purchase an range of sandpaper sheets using an excess supply of 100 grit paper. You’ll get that this grade of paper the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Though low tech in concept, these tools allow you to taper edges, flatten high spots and correct any imperfections in timber bits. {Start with a standard amount 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood bits as you operate on them. Unfortunately, good clamps are costly and it usually requires the beginner woodworker a couple of years to accumulate a comprehensive set of wood clamps. Start with a set of long”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure is still the same. Get a pair of the longest clamps that you could spend. You can get in touch with them for smaller adhesive jobs and enlarge them to their full length for bigger jobs.

Shop Vice: A store vice installed in the end of your bench is ideal for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices using their timber clamping surfaces can securely hold wood bits without marring or damaging them. Many of the greater vices offer quick release mechanisms that enabled the consumer to rapidly open and close the limbs without tedious handle turning. The wood clamping surfaces on your vice will occasionally require replacement. I prefer to utilize soft pine in my vices that won’t crush or damage many of the different woods that I utilize. Whether I’m working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be among your most frequently used tools. Buy a good quality name brand tape measure with a broad tape usually in the 25-foot range. Even though in your store you may not be using the tape at these spans, the larger tape steps provide more rigid tapes that will not flop around and slip off the ending of boards. Measuring when you’re by yourself will be a lot simpler, and naturally, quality tape measures can endure for many years.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the timber.

What is Woodworking? How to Become a Master Woodworker From Your Own Home Easy Wood Projects To Make And Sell

Woodworking is referred to as the building or the creation of items from wood. It is possible to produce a lot of unique objects from woodworking and these objects can be as big as gazebos or as small as wooden toys. No matter how big or small your personal project maybe you’ll be quite likely to do that aim with woodworking. In addition, woodworking has lots of private in addition to emotional benefits! In the following article, I am going to briefly identify some of the benefits for you.

Woodworking as a Career:

A good deal of individuals who love to work with their hands have turned that love into a career through woodworking. Individuals who build things from wood are usually known keyword because carpenters. Carpenters can operate on a variety of woodworking projects and job types. For example, some carpenters possess their carpentry company and these folks have the luxury to set their job hours. This benefit enables carpenters the opportunity to spend more time with their families and also have less job strain. Raising kids is a really tough task regardless of what way you approach the task! To get a carpenter who possesses their own company, this job may not be hard because that individual will have more time to be part of his or her child’s lifetime. By playing a larger role in the life of your child you will be having a larger influence on the type of character that kid develops into, which is a huge concern for any loving parent. In addition to these benefits, carpentry may also have health benefits too.

The Benefits of Woodworking Easy Wood Projects To Make And Sell

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood round a whole lot. This results in more physical activity, which results in better physical health. Maintaining your body physically fit is vital and keyword can assist in preventing the incidence of various ailments in the foreseeable future life. By being physically fit you can decrease chances you will have a heart attack, have seizures, become a diabetic, and reduce the odds of having a number of other disorders.

Easy Wood Projects To Make And Sell, Do It Yourself Woodworking Saves Cash:

I feel like that I paid way too much when I go to home improvement stores and purchase patio furniture, and I am sure that I am not the only person that has felt this way! A successful small business owner once told me to always raise the sales price of a commodity to double everything you got it for. In this manner, you always have the option to reduce the merchandise to 50 percent off and still come out without getting any losses. This seems like it may be exactly the exact same tactic that home improvement shops use in selling their wooden furniture products. Regardless, there is a way which you can get around paying the extra cash and that’s to do with building it yourself. Fortunately, there are some really good woodworking products offering thousands of comprehensive woodworking keyword plans for countless different project types. So, you really can build whatever you need or see in almost any home improvement store. Doing something does require a bit of time but time is well spent when you wind up saving hundreds of dollars as a result of your hard work.

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Band of Brothers (miniseries)

Band of Brothers is a 2001 American war drama miniseries based on historian Stephen E. Ambrose's 1992 non-fiction book Band of Brothers.[3] The executive producers were Steven Spielberg and Tom Hanks, who had collaborated on the 1998 World War II film Saving Private Ryan.[4] The episodes first started airing on HBO September 9, 2001, two days before 9/11. The series won Emmy and Golden Globe awards in 2001 for best miniseries.

The series dramatizes the history of "Easy" Company, 2nd Battalion, 506th Parachute Infantry Regiment, of the 101st Airborne Division, from jump training in the United States through its participation in major actions in Europe, up until Japan's capitulation and the war's end. The events are based on Ambrose's research and recorded interviews with Easy Company veterans. The series took literary license, adapting history for dramatic effect and series structure.[5][6] The characters portrayed are based on members of Easy Company. Some of the men were recorded in contemporary interviews, which viewers see as preludes to several episodes, with the men's real identities revealed in the finale.

The title for the book and series comes from the St Crispin's Day Speech in William Shakespeare's play Henry V, delivered by King Henry before the Battle of Agincourt. Ambrose quotes a passage from the speech on his book's first page; this passage is spoken by Carwood Lipton in the series finale.

Video: Woodworking Tools