Easy Woodwork Ideas For Kids | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable ideas and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and a few of those attributes along with a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, himself is also an instructor and a member of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they are following because all the ideas and jobs Ted’s source are simple to understand and simple. Ted McGrath spent two years researching so that he could collect enough material for a comprehensive bundle, and he ended up making a truly’complete’ woodworking source.

Many might still seem unsure if they need to be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it more challenging to make the ideal option. There are actually lots of things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. People who are only getting started will discover the ideas and jobs in Ted’s bundle quite easy. Without doubt, complicated carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s simple step-by-step directions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who purchase his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page source that will help beginners learn a lot about woodworking. They will also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will be able to find any project of their choice within this bundle quite easily, though there numerous choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and people who purchase it will be backed by a 60-day warranty, so when this woodworking package fails to satisfy them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long period to down because of its large size. Yet, with a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nevertheless, they didn’t mind being overwhelmed considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design package is so comprehensive and vast that it contains just about every woodworking project a woodworker may be interested in building.

This woodworking package made by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking bundles that can be found across the internet. Ted has done his best to direct them in every possible way he can, through easy to understand textual instructions, clear pictures and even videos too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking projects they will find inside. Therefore, it is definitely worth buying!

The Benefits of Woodworking Easy Woodwork Ideas For Kids

Woodworking is 1 hobby that can also be a rewarding profession if you like to work together with your hands and build exquisite pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a nice woodworking craftsman, you will be able to build all kinds of furniture, (table, beds, and chairs), with ease. You can then sell your completed woodworking jobs and make a handsome profit. Easy Woodwork Ideas For Kids.

It takes time to become skilled in the craft of woodworking. The wonderful thing about working up to that expert craftsman level is you’ll have the ability to create some really nice furniture to you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit on your living space. It’ll be a topic of conversation whenever you have friends come over to visit. They will ask: How did you create it? How long can it take to complete the project? What type of wood did you use? What kind of tools did you use? Just how on earth did you make such a gorgeous item of furniture? As you discuss your work, a sense of pride will come over you and also don’t be surprised if your friends ask you to make one for them too!

Finding Woodworking Projects and Plans for Beginners Easy Woodwork Ideas For Kids

If you are thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to begin in Woodworking? Easy Woodwork Ideas For Kids.

Start with an idea in mind of what you would like to build and then get a excellent woodworking project plan that’s geared toward beginners. There are numerous small woodworking projects for novices available for sale from online woodworking merchants. Of course, you can begin with as expansive a woodworking plan as you choose. On the other hand, the chances are if you start out with a little woodworking job initially, you will get a better prospect of keyword finishing the project.

Your woodworking project plan should incorporate some lists! Length of: woodworking equipment, the amount and variety of wood needed, and the essential hand tools and power tools to finish the project. Note: A word of warning about purchasing woodworking tools. Only buy what you want to finish your immediate or upcoming endeavor. This is important especially if you are a beginner and just starting out. Tools are not affordable. The newcomer needs good woodworking gear, but it is simple to break the bank purchasing a lot of tools you may not utilize all that often. If you do buy gear, buy quality. Do a bit of research and compare goods. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, finish punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking clamps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also don’t overlook that the wood glue and a brush to spread the wood adhesive! Obviously, you’ll need a dry place to work and may require a set of horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more woodworking hand tools and much more woodworking power tools , but the concept is to purchase the crucial hand and power tools that novices will need. You can always add to your arsenal as you gain experience!

Easy Woodwork Ideas For Kids Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you’ve purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. However, if you are not certain about what to do there is help available! There are several areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of those several woodworking magazines out there. Each month the writers in woodworking magazines do a story about how best to increase your woodworking craft. Whether it’s showing you the way to apply a finish to a completed project, or how to make a mortise and tenon joint, something new could be learned each month. Next, is buying educational DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to work with a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Starting Your First Woodworking Shop Easy Woodwork Ideas For Kids

If you’re just beginning and very enthusiastic about doing a DIY project for home afterward, woodworking could be fun. If you do not have the right information, education, and skill, you may wind up spending more time and money than you initially intended to spend. As a novice woodworker, you need to have time and the appropriate tools. Having mentioned, there are a couple of essential aspects you should keep in mind, before beginning with any woodworking project.

1. If you are a beginner, you should first need to be somewhat interested in woodworking. Making something new with your own hands is a special feeling. Do not begin a job if you’re not interested, as this may land you at a bad place.

2. Think of the primary reason for making this woodworking project. Decide on the uses of the thing you’re making.

3. Consider your skills and examine the time you have, before you begin with a job.

4. Start jobs that you can finish. If you’re in the midst of a work, then it’s wise not to start any project in any way.

How to Become a Master Woodworker From Your Own Home Easy Woodwork Ideas For Kids

If you keep those vital things in your mind before beginning a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires planning as much because it takes effort. So how can you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to opt for the woodworking projects you want to begin with. As a newcomer, always pick a project that has quite a basic construct up or a simple construction. A few simple to start projects comprise, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you could always move into the next level of woodworking projects, such as cabinets, sheds, along with others. Beginning jobs should always keyword be less complicated and less frustrating so you have a better knowledge of working with forests and their resources. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Easy Woodwork Ideas For Kids

Tools would be the means through which you can win the battle of woodworking. Many men and women believe power tools are needs. But for novices, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and measurements. Even the workbench, when mended with vises, provide ample space to operate. As a key tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things much simple for you. When you buy a hammer, always assess the equilibrium between the weight and stand. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws available in the marketplace. Decide on a size that you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Possessing all of them can help you in advance woodworking. You might even buy keyword power screwdrivers as they make the work much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you demand a wrench. However, this isn’t a tool for novices, but using it might make work easier for you at a later stage.

7. Drill – Drill helps you make holes in wood. Low wattage power drills will make the task much easy.

8. Additional small and fundamental tools – These include pencils, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s not any fixed price on woodworking projects. Based on the type of job that you would like to complete, pricing could be set. The easy the job, the less cost it involves. However, at the very beginning buying the tools will be somewhat hefty. Because of this, it’s much better to resolve a budget first on the tools, then keyword on the project. Buying the fundamental tools will make certain you do not need to purchase any more material aside from the timber ply.

Time and Instructions

Instructions are one of the primary things that every beginner should follow. Instructions guide is very easy to understand the process, what to do and how to do it. Time also has a significant role in the construction of woodworking projects. Woodworking projects demand time and so it’s crucial for a novice to have ample quantity of time every week.

Ideas for Beginners

There aren’t any quick tips or suggestions that will make the work easy. But the most essential thing keyword which can help you to reach success is proper preparation. With proper planning and a strategy, it’s possible to achieve success quickly. If you understand the objective of woodworking, then the item you want to construct, the tools you require to possess and the average time it’s possible to give every day; then you are ready to go.

Conclusion, Easy Woodwork Ideas For Kids

All these tips and education will make the woodworking projects and strategies for beginners quickly to complete. Always ensure you have all of the essential tools, materials, space prepared. Keep the instructions for constructing a product handy. Appropriate strategy and planning will help you to earn a great woodworking project for your home.

|

Starting Your First Woodworking Shop Easy Woodwork Ideas For Kids

Folks if you’re trying to find a way to pass time or want an alternate way to make money they generally turn into a hobby that they enjoy. It’s very exciting to do and everyone can get started.

When doing woodworking at home there are a lot of projects one can think of. When starting out you need to be quite cautious when choosing which project to begin with since you will find jobs which may be too tough for a beginner. But do not be concerned about that because we are going to provide you guidelines on the ideal means to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working gear, therefore before you pick your job you have to be aware of if you have the available resources to work on such a project. Try not to spend a lot of money on purchasing gear when starting out, buy more equipment as you gain more experience and become an expert carpenter. If you enjoy your hobby then there’ll not be any gap between the hand and the hands.

The Benefits of Woodworking Easy Woodwork Ideas For Kids

Woodworking in your home will give you time to explore unique jobs and learn so many things. That is why it’s very important to spend less money when starting out so you can manage to make mistakes and at any time learning about different projects.
It’s extremely important that you know more about the different types of wood available for creating jobs. Expect carpenters utilize several types of wood quality for decorating bits, learning which type of wood that they use will help you prepare the wood you will need for specific projects you may choose to pursue.
Once you understand the fundamentals of wood selection and the usage of different tools now you can implement them in cutting out well wood pieces and putting wood together. Knowing what to do can help you in building good jobs to satisfy your needs.

Easy Woodwork Ideas For Kids practice makes perfect so make sure that you practice your work daily if possible. Try out a lot of designs using a variety of tools so you can get the hang of working with the tools. When starting out you can make a number of mistakes but with time you will find out how to properly use them and produce quality projects.

|

The Benefits of Woodworking Easy Woodwork Ideas For Kids

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You may get started on a shoestring with a minimal amount of gear and equipment. A small home workshop may generate a broad array of simple projects which will allow you to develop your creative and building abilities while rewarding you with artistic and practical wood products that you are able to enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let us discuss where you’ll do your woodworking, based on the dimensions of your house, you might be able to create a dedicated space to your woodworking tasks. This might be a reserved place on your garage or in your cellar. In some cases, a detached shed or outbuilding might be perfect to set up your first store. A heated store detached from your home offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement workshops will inevitably create dust that travels into the living area of your home. This is particularly true in homes with forced air heating systems in which cold air yields located in the cellar draw dust up into the top levels of the home. Another advantage of detached workshops would be, clearly, the noise level. You can work without disturbing the rest of the household. A fantastic compromise might be the garage of your home.

This can help decrease the difficulties of dust and sound, however depending on where you reside, a keyword garage layout may not be practical during extremes of hot or cold weather.

The Benefits of Woodworking Easy Woodwork Ideas For Kids

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes they include more space to work in. Easy Woodwork Ideas For Kids if you can have a dedicated place for a marathon all the better. Floor gear and bench top gear can remain in position from project to project. If this installation isn’t impossible, at least attempt to make a chair area where equipment could be stored and pulled out as needed. If at all possible plan for inevitable growth as you get more tools and equipment. At the start, set up a seat area where you are able to shop and use most of your gear, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. Insert a sturdy shelf below the bench to home your hands power tools along with a pegboard above the seat to hang other equipment. Install a woodworking at one end of your bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Easy Woodwork Ideas For Kids

The scope of your startup equipment will be mostly based on your financial plan. Whether you’ve got large financial resources or you are starting on a shoestring always buy quality equipment. If you can afford it, buy your quality tools in the regional building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or alternative local advertisements. You will find an abundance of quality lightly used tools out there which belong to people who embarked on that one molding job around the house or received tools as presents which they won’t ever use. You can usually purchase tools for all these sellers for under half of the initial price and save even more money should you make a package deal for all their unused equipment. Obviously, acquiring tools from private people will require extra time and perhaps travel expenditures. Weigh the advantages of traveling around town to save a few extra dollars on a inexpensive piece of equipment. The excess expense of time and travel in these situations is usually justified when purchasing large ticket items such as table saws, bandsaws or high ended tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal amount of hand equipment yet generated sophisticated and complex pieces. Focus on developing your abilities with your start-up set of tools and avoid lamenting about the equipment you wished you’d.
Here is a listing of the more useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a decent pair of safety glasses which also offer you some side protection to your eyes. Buy a quality acrylic collection that will be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually impair your vision and influence security. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You can avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of critical safety gear you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking may be noisy and long-term exposure to those noise levels may affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most employees tire faster when exposed to high noise levels. Select effective hearing protection that you find comfortable and effective. Last, wear a cap to keep the dust from your hair. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Often referred to as a skill saw following the favorite name, this may end up being the most versatile instrument in a start-up workshop. In fact, in the hands of an expert, a power hand saw can be used to construct an whole property. As mentioned before get a quality manufacturer saw. Avoid cheap unknown brands. All these tend to cut back and will burn out before you start your second project. After selecting the proper saw install an excellent blade. Most skill saws include a starter blade of lower quality even if they are a fantastic saw. Keep this blade as a copy and put in an excellent blade with carbide teeth. Start with a hybrid . These possess a balanced enamel count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument cannot just cut corners. It is perfect for cutting holes in wood too like handle slots. At some point, you’ll want to obtain a ring saw. Bandsaws are even more versatile but a excellent floor unit could be costly. A jigsaw may be a fantastic stop gap to the novice woodworker.

Buy an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss over the standard 3/8 inch version. Down the road, the 1/2 inch version will prove to be versatile. Through hard lessons learned, I have discovered that buying quality, in this case, is more crucial than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their battery life will be bad and to make matters worse keyless chucks come loose and slip frequently. This is 1 annoyance you don’t want on your workshop. Buy an range of superior carbide tipped drill bits which are kept in a holder labeling each drill bit size. Create a habit of returning each drill bit to its prospective slot at the holder after each use. Last, get a set of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer remains as the most flexible instrument in the shop, and often the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries happen. Although the most ordinary, hammer injuries are usually of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, doesn’t rust and features a comfortable handle. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood handles with poor joints between the head and handle. The head typically comes loose and the tool becomes useless. Select a title brand quality hammer at the 16-ounce range for general work and also a smaller finishing hammer for more complex work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These types of hammers are more appropriate to rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can manage just about any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you’ll likely upgrade to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and even limited amounts of surface area. As you embark on your first few projects you’ll discover your palm sander using just a bit of effort can change rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and form rough boards with 100 grit paper and later finish your work with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets using an extra supply of 100 grit paper. You’ll find that this caliber of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Though low tech in concept, these tools enable you to taper edges, sew high stains and fix any imperfections in wood bits. {Start with a standard amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood pieces as you work on them. Unfortunately, good clamps are costly and it normally requires the beginner woodworker a couple of years to collect a comprehensive set of timber clamps. Start with a set of extended”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure is still the same. Get a pair of the longest clamps that you could spend. You may get in touch with them for smaller adhesive jobs and enlarge them to their entire length for larger jobs.

Shop Vice: A store vice installed in the end of your bench is perfect for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the better vices offer rapid release mechanisms that enabled the consumer to quickly open and close the limbs without dull handle turning. The wood clamping surfaces on your vice will periodically require replacement. I would rather use soft pine in my vices that won’t crush or damage many of the different woods that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be among the most frequently used tools. Buy a fantastic quality name brand tape measure with a broad tape usually in the 25-foot range. Even though in your shop you might not be using the tape in these lengths, the larger tape measures offer more rigid tapes which will not flop around and slip off the ending of boards. Assessing when you’re on your own will be a great deal simpler, and naturally, quality tape steps can endure for many decades.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will require additional sanding. Avoid oversize carpenter’s pencils. Their big flat leads are simply too coarse for precise measurement in the workshop.

Other Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools can assist you in marking the ideal angles in addition to compound angles. Get the number two and three Robertson set. I discover the Robertson format works best for most woodworking projects and is the most compatible with a drill powered bits. Last, get a pair of 12-inch wood files. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and repairing little mistakes along the way.

Adhesives: Not many glues are created equal. Stay away from inexpensive house brands marketed as carpenter’s glue. The expense of adhesive through all of your projects is a little cost consideration. Therefore, it makes sense to go with the very best. I also have found over the years that I get the best results with both indoor and outdoor jobs when I use quality outside grade glue. These resin-based compounds unlike conventional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Easy Woodwork Ideas For Kids

The peaceful satisfaction of woodworking is a wonderful experience in this era of hurried lives, smart phones, and time-starved livelihood. With a minimal investment in the most rudimentary tools and equipment, anyone can learn the profitable abilities of his time-tested hobby and revel in job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

The Elite (novel)

The Elite is the second novel in the best-selling Selection series by Kiera Cass.[1] It is narrated by America Singer, a 17-year-old girl who is selected to compete with 34 other girls to become Prince Maxon's wife and become queen. The Elite tells the story at the stage in the competition where there are only six girls left and tensions are high from both the competition and the dangerous rebels.[2]

The book takes place 300 years in the future in a country called Illéa (formerly the United States) that has a strict caste system.[3] The castes range from eight to one, with Eights being the homeless and Ones being the royal family. Prince Maxon has narrowed down his selection candidates to an Elite of six girls: America, Kriss, Celeste, Elise, Natalie, and Marlee. Maxon must find a wife among these girls.[4] In order to do so, Maxon meets their families and throws a Halloween Ball, at America's suggestion. At the ball, Maxon and America dance and he tells her that he will propose to her after the Selection at the right time so that it is easy for her to say yes. America feels sure about marrying Maxon. After the ball, it is discovered that Marlee has been having a secret affair with one of the guards, and as a consequence, is severely caned, a horrible form of whipping. The episode results in her becoming an Eight. Upset and angry that Maxon would let such a thing happen to Marlee, America reconsiders her feelings for Maxon. Then, the girls must plan an event and are split into two teams: America and Kriss, and Natalie, Celeste, and Elise. After much planning, America and Kriss's reception with the Italian Royalty is successful. Celeste shows America an article which shows that she is now the least favorite, and Celeste is the highest. After this, Maxon asks to speak with America. He shows her the Princess' suite as well as her best friend, Marlee. The two girls talk about Marlee's new life, where she cooks in the kitchen and has married Carter Woodwork, the former guard. Maxon and King Clarkson go to New Asia and plan to stay at Elise's parents house. The palace ends up losing connection with the king and Maxon. They return. America is later crushed when she sees Maxon kissing a half-naked Celeste in the hallway. She later angrily confronts him, asking to leave. However, he rejects her request. For their next project, the girls must give a presentation that will be broadcast on The Report. America, after reading secret diaries of Gregory Illéa, the first king, presents the idea that the castes should be eliminated. She attempts to answer questions by showing the diary. Immediately, the outraged king shuts down the report, takes the diary from her and demands she returns home. However, Maxon insists she stays, leaving his father infuriated. The Southern Rebels then attack the palace and America runs into Maxon leaving the hospital wing on her way to the gardens. He is acting weird and seems to be in pain. They get locked in a safe room and Maxon is forced to tell America that his father had whipped him after America’s stunt on “The Report” and she cleans him up. She asks Maxon what the other scars are for and he says they were for things he had said, done, or known. He reveals that it has been happening for a while. They talk about their feelings and Maxon explains his interactions with Celeste and him becoming close to Kriss. They kiss and imply that they love each other. Once America thinks she is going home, she realizes how much Maxon means to her and that she is going to fight for him and his love once he convinces his father to give her one last chance to behave.

The book received mixed critical reviews. Kirkus Reviews called it "vapid", but they also described the book as a "fast read."[5] The Elite has an editor ranking of 4.5 out of 5 stars on YA Books Central. The book was reviewed favorably by some consumers with a user rating on YA Books Central of 4.1 out of 5 stars.[4] The book was well received commercially. The week of May 12, 2013 it was number one on The New York Times Best Sellers List for the Young Adult Category.[1] The novel also performed well in ibook sales ranking at 9 in the Children's and Teen Category the week of May 25, 2014.[9] As of May 11, 2014 The Elite, together with The Selection, has sold over 800,000 copies. Also, 26 territories have the rights to the series.[10]

Video: Woodworking Tools