Easy Woodworking Gifts | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable thoughts and projects.

The package has various qualities which make it the”#1 woodworking Resource” and a few of those attributes along with a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an educator and a member of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking when they are following because all the ideas and projects Ted’s source are easy to comprehend and easy. Ted McGrath spent two years exploring so he could gather enough material for an extensive bundle, and he ended up making a truly’complete’ woodworking resource.

Many might still appear unsure whether they need to be purchasing Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it even more difficult to make the right option. There are actually lots of things that set Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit out of Ted’s woodworking Package. Those that are only getting started will discover the ideas and jobs in Ted’s bundle quite easy. No doubt, complicated carpentry is involved; however, they will discover that it’s really simple to follow Ted’s simple step-by-step directions. Currently, both beginner and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who buy his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a whole lot about woodworking. They will also have the ability to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers will be able to find any project of their choice within this package quite readily, though there numerous options.

60-Day Iron Clad Money Back Guarantee

In general, this product is and those who buy it will be endorsed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long time to down because of its large dimensions. Nonetheless, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are several ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nonetheless, they didn’t mind being overrun considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design bundle is so comprehensive and vast it contains pretty much every woodworking project a woodworker might be considering constructing.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking bundles that are available throughout the net. Ted has done his very best to direct them in every conceivable way he can, through easy to comprehend textual instructions, clear pictures and even movies as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find within. Therefore, it’s definitely worth buying!

Finding Woodworking Projects and Plans for Beginners Easy Woodworking Gifts

Woodworking is one hobby that could also be a rewarding career if you love to work with your hands and construct exquisite pieces of furniture from wood. When you learn the woodworking crafts and eventually become a fine woodworking craftsman, you’ll be able to build all kinds of furniture, (table, beds, and chairs), with ease. After that you can sell your finished woodworking projects and make a handsome profit. Easy Woodworking Gifts.

It requires time to become proficient in the craft of woodworking. The wonderful thing about working up to that expert craftsman degree is you will have the ability to build some really nice furniture to you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit in your living room. It’ll be a topic of conversation whenever you have friends come over to see. They’ll ask: How can you create it? Where did you get the woodworking plans? Just how long can it take to finish the job? What kind of tools did you use? Just how on earth did you make such a beautiful item of furniture? As you discuss your job, a sense of pride will come over you and don’t be surprised if your friends ask you to make one for them too!

How to Become a Master Woodworker From Your Own Home Easy Woodworking Gifts

If you’re thinking you are too old or too young for woodworking, think again! You are never too old or too young for such a fun hobby and it’s ideal for beginners!

Where to Begin in Woodworking? Easy Woodworking Gifts.

Start with a concept in your mind of what you want to construct and then get a really good woodworking project plan that is geared toward novices. There are several small woodworking projects for novices available for sale from online woodworking merchants. Of course, you can start out with as expansive a woodworking plan as you pick. However, the odds are if you begin with a small woodworking project at first, you’ll have a better chance of keyword completing the project.

Your woodworking project plan must include some lists! Lists of: woodworking hardware, the quantity and type of wood required, and the required hand tools and power tools to finish the project. Note: A word of warning about buying woodworking tools. Only buy what you need to finish your instant or upcoming project. This is important especially if you’re a beginner and just beginning. Tools aren’t cheap. The beginner needs good woodworking gear, but you can easily break the bank buying a great deal of tools you might not use all that frequently. When you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you can afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting angles), a coping saw, finish punches, flat and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking clamps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and don’t overlook the wood glue and a brush to spread the wood adhesive! Obviously, you’ll need a dry area to work and might need a set of horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more innovative hand tools and more woodworking power tools , but the idea is to buy the crucial hand and power tools which novices will need. You can always increase your arsenal as you gain experience!

Easy Woodworking Gifts Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have bought your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. But if you’re not certain about what to do there is help available! There are lots of areas that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of the many woodworking magazines available. Every month the authors in woodworking publications do a story on the best way to increase your woodworking craft. When it is showing you how you can apply a finish to a completed project, or how to create a mortise and tenon joint, something new can be learned every month. Next, is purchasing instructional DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to use a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

The Benefits of Woodworking Easy Woodworking Gifts

If you’re a beginner and very enthusiastic about doing a DIY project for house then, woodworking could be fun. If you don’t have the right information, instruction, and ability, you might land up spending more time and money than you initially intended to spend. As a novice woodworker, you want to have space, time and the appropriate tools. Having mentioned, there are a couple of essential aspects that you should keep in mind, before starting with any woodworking project.

1. If you’re just beginning, you must first have to be somewhat interested in woodworking. Creating something new with your hands is a special sense. Do not start a project if you’re not interested, because this might land you in a terrible location.

2. Think of the main reason for creating this woodworking project. Decide on the uses of this item you’re making.

3. Consider your abilities and analyze the time you have, until you begin with a project.

4. Start projects which you can finish. If you are in the midst of a work, then it’s better not to start any project in any way.

How to Become a Master Woodworker From Your Own Home Easy Woodworking Gifts

If you maintain these essential points in your mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires preparation as much because it takes effort. So how do you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking jobs you want to start with. As a newcomer, always select a job which has quite a basic construct up or a very simple construction. A few easy to begin projects include, bird feeder, benches, shelves, etc.. The moment you find the techniques, you could always proceed to the next level of woodworking projects, such as cabinets, sheds, along with others. Beginning jobs should keyword be complicated and less frustrating so that you have a better comprehension of working with forests and their tools. When the project is selected, start selecting your tools.

Beginners Woodworking Tools, Easy Woodworking Gifts

Tools would be the means whereby you will win the struggle of woodworking. A lot of men and women believe power tools are requires. But for beginners, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is the hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for exact cuts and dimensions. Even the workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer can make things much simple for you. When you buy a hammer, constantly assess the equilibrium between the weight and endure. Always pick a hardy, yet lightweight item.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool helps you to cut forests at different sizes. There are different types of saws out there in the marketplace. Decide on a size which you could handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Possessing all of them will help you in advance woodworking. You might even buy keyword power screwdrivers as they make the work much faster.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you demand a wrench. However, this is not a tool for novices, but using it might make work easier for you at a later stage.

7. Drill – Drill helps you make holes in timber. Low wattage power drills will make the task much easy.

8. Other small and basic tools – These include pencils, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s no fixed price on woodworking projects. Dependent on the sort of job that you want to complete, pricing can be set. The simple the project, the less price it involves. However, at the very beginning buying the tools will be somewhat hefty. Because of this, it’s much better to fix a budget on the tools, then keyword on the project. Purchasing the basic tools will make certain you don’t have to purchase any more material aside from the timber ply.

Time and Instructions

Directions are one of the principal things which each and every newcomer should follow. It is like the woodworking Bible. Instructions guide is quite simple to comprehend the process, what to do and how to get it done. Time also has a significant role in the building of woodworking jobs. Woodworking projects require time and so it is crucial for a beginner to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or tricks that will make the work easy. But the most indispensable thing keyword that will allow you to reach success is proper planning. With appropriate planning and a plan, it’s possible to achieve success immediately. If you understand the purpose of woodworking, then the thing you need to build, the resources you require to own and the average time you can give every day; then you are ready to go.

Conclusion, Easy Woodworking Gifts

All these tips and instruction will make the woodworking projects and strategies for novices quickly to complete. Always ensure you have all the vital tools, materials, space prepared. Read the instructions for constructing a product handy. Proper strategy and planning can help you to make a great woodworking job for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Easy Woodworking Gifts

People if you’re trying to find a way to pass time or want an alternative method to make money they generally turn to a hobby they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based business. It is very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you need to be quite careful when choosing which job to start out with since there are jobs which can be too tough for a newbie. But do not worry about that since we are going to provide you tips on the ideal means to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, so before you choose your project you need to be aware of whether you have the available tools to work on that job. Try not to invest a lot of money on purchasing equipment when starting out, purchase more equipment as you get more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no difference between the hand as well as the normal hands.

Finding Woodworking Projects and Plans for Beginners Easy Woodworking Gifts

Woodworking in your home will provide you time to research unique jobs and find out a lot of things. That’s why it’s important to invest less money when starting out so that you can manage to make mistakes and at some time learning about various projects.
It’s very important that you know about different types of wood available for making jobs. Anticipate carpenters use different kinds of wood quality for decorating bits, learning which type of wood they use will allow you to prepare the wood you’ll need for specific projects you may choose to pursue.
Once you understand the fundamentals of wood selection and the usage of different tools you can now implement them in cutting well wood pieces and putting wood together. Knowing what to do will help you in creating good projects to satisfy your needs.

Easy Woodworking Gifts practice makes perfect so be sure that you practice your work every day if at all possible. Try out a lot of designs using various tools so you can get the hang of using the tools. When starting out you can earn a range of errors but with time you will find out how to properly use them and produce quality projects.

|

How to Become a Master Woodworker From Your Own Home Easy Woodworking Gifts

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimal number of gear and equipment. A small home workshop may produce a broad array of simple projects which can help you develop your creative and construction skills while rewarding you with practical and artistic wood products which you are able to enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let us talk about where you will do your woodworking, Depending on the dimensions of your home, you may have the ability to produce a dedicated space into your woodworking tasks. This might be a reserved place in your garage or on your cellar. In some cases, a detached shed or outbuilding might be ideal to set up your first shop. A heated shop detached from your house provides one distinct advantage: better dust control. Without sophisticated dust control systems, basement assignments will inevitably create dust that travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air yields found in the basement draw up dust into the upper levels of the home. Another benefit of detached workshops would be, clearly, the noise level. You can work without bothering the rest of the household. A good compromise might be the garage of your home.

This can help minimize the difficulties of dust and noise, however based on where you live, a keyword garage workshop might not be sensible during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Easy Woodworking Gifts

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes that they include more space to function in. Easy Woodworking Gifts if you can have a dedicated place for a marathon all the better. Floor gear and bench top equipment can stay in place from project to project. If this setup is not impossible, at least try to make a chair area where equipment could be stored and pulled out as needed. If possible plan for inevitable expansion as you acquire more tools and equipment. At the beginning, establish a seat area where you are able to store and use most of your gear, with a temporary expansion of your activities onto the garage or basement floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. That will enable you to work comfortably while standing. Add a sturdy shelf below the seat to house your hand power tools along with a pegboard above the seat to hang additional gear. Install a woodworking vice at one end of your seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Easy Woodworking Gifts

The reach of your startup equipment will be mostly based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, purchase your quality tools in your local construction and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or other local ads. There are an abundance of quality gently used programs out there that belong to individuals who embarked on that one molding project around the house or received tools as gifts which they won’t ever utilize. You can usually buy tools for all these sellers for under half of the initial cost and save even more money if you make a package deal for all their unused equipment. Of course, acquiring tools from private individuals will require additional time and possibly travel expenditures. Weigh the benefits of traveling across town to save a few extra bucks on a cheap piece of equipment. The extra cost of travel and time in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or large ended tools such as surface planers later on.
For smaller acquisitions, a trip to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal quantity of hand gear yet generated sophisticated and complex pieces. Concentrate on developing your abilities with your start-up set of tools and avoid lamenting about the gear you wished you had.
Here is a listing of the useful tools You Will Need to get started:
Safety Gear: Start as anticipated by eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Buy a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually impair your vision and affect security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You may avoid wearing them all together in the event that you find them uneasy.

The next piece of critical safety equipment that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking may be noisy and long-term exposure to those sound levels may affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats fatigue.

Most employees tire quicker when exposed to elevated sound levels. Last, wear a cap to keep the dust out of your hair. With this setup I am protecting my eyes and my ears. I’m keeping the dust from my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw after the favorite brand name, this may end up being the most flexible tool in a start-up workshop. In reality, at the hands of a professional, a power hand saw can be employed to construct an entire house. As mentioned earlier get an excellent brand saw. Stay away from cheap unknown brands. These are inclined to cut back and will burn out before you even start your next job. After choosing the right saw install a quality blade. Most saws come with a starter blade of lesser quality even if they’re a good saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include great flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool cannot just cut curves. It’s perfect for cutting holes in timber also like manage slots. Eventually, you’re going to want to obtain a band saw. Bandsaws are even more flexible but a quality floor unit could be costly. A jigsaw may be a good stop gap to the novice woodworker.

Buy an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss within the standard 3/8 inch version. Through tough lessons learned, I have found that buying quality, in this scenario, is much more critical than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their long-term battery life will be bad and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you don’t want in your workshop. Buy an range of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Create a habit of returning every drill bit to its prospective slot in the holder after each use. Last, get a pair of tough steel driver bits. Your drill can also be a versatile screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer remains as the most versatile tool in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries occur. Even though the most ordinary, hammer injuries are usually of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and comes with a comfortable handle. Many hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The mind usually comes loose and the tool becomes useless. Pick a name brand quality hammer at the 16-ounce scope for overall work and also a smaller completing hammer for more intricate work. Avoid using large framing hammers in the workshop and any with dimpled mind tips. These types of hammers are more suited to rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can manage pretty much any trimming requirements that you’ve got as a beginner woodworker. As your woodworking skills evolve, you will probably update to a floor version disc and belt sander. However, for now, the ever-versatile palm sander can clean up edges, cross cuts and even limited quantities of surface area. As you embark on the first few projects you’ll find that your palm sander using a little bit of effort can change rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and shape rough boards with 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an range of sandpaper sheets using an extra source of 100 grit paper. You’ll get that this grade of paper the most versatile in your shop.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Although low tech in theory, these tools enable you to taper edges, sew high stains and fix any imperfections in timber pieces. {Begin with a standard number 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold down your wood pieces as you work on them. Unfortunately, superior clamps are expensive and it usually requires the novice woodworker a few years to collect a comprehensive set of wood clamps. Begin with a set of long”pipe” clamps. Today the pipe has been replaced with long steel shafts, however, the structure remains the same. Receive a set of the longest clamps that you could spend. You can get in touch with them for smaller glue jobs and expand them to their entire length for larger jobs.

Shop Vice: A shop vice installed in the end of the seat is ideal for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices using their wood clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer quick release mechanisms that enabled the consumer to quickly open and close the limbs with no tedious handle turning. The wood beamed surfaces on your vice will occasionally need replacement. I prefer to utilize soft walnut in my vices which will not crush or damage many of the different woods that I utilize. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be among the most often used tools. Buy a fantastic quality name brand tape measure with a wide tape usually in the 25-foot selection. Even though in your store you might not be using the tape in these lengths, the larger tape measures offer more rigid tapes which will not flop around and slip off the ending of planks. Measuring when you are on your own will be a lot easier, and of course, quality tape steps can endure for many decades.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need extra sanding. Avoid oversize carpenter’s pencils. Their big flat leads are simply too coarse for precise measurement in the workshop.

Other Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools will help you in marking the ideal angles as well as compound angles. Get the number three and two Robertson set. I find that the Robertson format works best for many woodworking projects and will be the most compatible with a drill powered bits. Last, get a pair of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and fixing small mistakes along the way.

Adhesives: Not many glues are created equal. Avoid cheap house brands marketed as carpenter’s glue. The expense of glue through all your jobs is a minor cost consideration. Therefore, it is sensible to decide on the very best. I also have discovered over the years that I get the best results with both indoor and outdoor jobs when I use quality outside grade glue. These resin-based compounds unlike traditional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Easy Woodworking Gifts

The peaceful satisfaction of woodworking is an excellent adventure in this era of rushed lives, smartphones, and time-starved careers. With a minimal investment at the most basic equipment and tools, everyone can learn the rewarding skills of his time-tested hobby and revel in job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Shaker-style pantry box

The bentwood box was originally a working box for storage of dry items, but today used more as a decorative item. The Shakers originally used the boxes for storing kitchen ingredients and small items and parts for the shop. They stored easily, as a smaller one could be put inside an empty larger one as in a Matryoshka-style nest; many smaller boxes could be stored within the space of the largest box. The idea of buying a complete set of seven or eight graduated size boxes was a luxury that was out of the reach of most nineteenth-century households, as each size cost about a full day's pay and the larger ones even more.[2]

The boxes were attractive to many besides the Shakers and their "fancy work" was sold by the thousands.[2] The boxes were made in various shapes and sizes, with their oval shaped ones being most popular. Box making was the leading symbol of Shaker life and one of their most productive business enterprises.[2] Loop handles were added to some varieties to make it easier to carry lighter items like eggs and sewing thread. Many times the boxes with handles were used to carry items to and from the market. Certain styles of boxes came with a single handle attached to the side that was used as a "dipper" scoop for different quantities.[3]

The Shakers were not the originators or inventors of these bentwood boxes, but did refine their style and standardize shapes and sizes.[1] According to master box-maker and Director for Collections and Research at the Shaker Museum (Mount Lebanon) at Old Chatham, New York, Jerry V. Grant, likely Shaker brothers from many of their communities already made the wooden boxes on a limited scale in the mid-eighteenth century.[4] They started making their boxes on an industrial scale at just a few of their communities about 1799.[4] These were Canterbury, New Hampshire; Alfred and Sabbathday Lake, Maine; Union Village, Ohio; and their New Lebanon Shaker Village.[4] They first started making boxes for sale to the outside world in New Lebanon around 1798–1799, which was just over 20 years since they had come to New York from England.[2]

Video: Woodworking Tools