Easy Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities that make it the”#1 woodworking Resource” and a few of those qualities alongside a few petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, himself is also an instructor and a member of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they are after because all the thoughts and projects Ted’s source are easy to understand and easy. Ted McGrath spent two years exploring so he could gather enough material for an extensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many may still seem unsure whether they need to be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it even more difficult to make the right choice. There are in fact lots of things that set Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit out of Ted’s woodworking Package. People who are only getting started will find the ideas and jobs in Ted’s bundle quite simple. No doubt, complicated carpentry is involved; however, they will find it really simple to follow Ted’s simple step by step directions. Presently, both beginner and seasoned ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who purchase his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a lot about woodworking. They will also be able to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers are going to be able to find any project of their choice in this bundle quite easily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who buy it’ll be endorsed by a 60-day warranty, so when this woodworking bundle fails to satisfy them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long time to down due to its large dimensions. Yet, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are several ideas, projects and plans at Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they didn’t mind being overrun considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design package is so thorough and vast it contains pretty much every woodworking project a woodworker might be considering constructing.

This woodworking package created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that can be found across the net. Ted has done his best to guide them in every conceivable way he can, through simple to comprehend textual directions, clear images and even videos too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking jobs they will find within. Therefore, it is definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more innovative hand tools and much more woodworking power tools here, but the idea is to purchase the crucial hand and power tools that novices will need. You may always increase your arsenal as you gain experience!

Easy Woodworking Plans Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you’ve purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to finish your project. However, if you are unsure about what to do there is help available! There are several places that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of those many woodworking magazines available. Every month the writers in woodworking publications do a story on how best to increase your woodworking craft. Whether it is showing you how you can apply an end to a finished project, or how to create a mortise and tenon joint, something new could be learned each month. Next, is purchasing educational DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to use a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Starting Your First Woodworking Shop Easy Woodworking Plans

If you are a beginner and very enthusiastic about doing a DIY project for home then, woodworking could be interesting. If you don’t have the proper information, instruction, and ability, you might land up spending more money and time than you originally intended to spend. As a novice woodworker, you need to have space, time and the correct tools. Having mentioned, there are a couple of essential factors that you should keep in mind, before beginning with any woodworking project.

1. If you are a beginner, you should first need to be very interested in woodworking. Creating something new with your hands is a special feeling. Don’t begin a project if you’re not interested, because this might land you in a bad place.

2. Think of the primary reason behind making this woodworking project. Choose the uses of the item you’re making.

3. Consider your skills and examine the time that you have, before you begin with a project.

4. Start jobs which you can complete. If you’re in the midst of a work, then it is better not to start any project in any way.

The Benefits of Woodworking Easy Woodworking Plans

If you keep these essential things in mind before you begin a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much because it takes effort. So how can you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to choose the woodworking jobs you want to begin with. As a beginner, always pick a project which has a very basic build up or a very simple structure. Some easy to start projects include, bird feeder, benches, shelves, etc.. As soon as you get hold of the techniques, you can always move to the next level of woodworking jobs, such as cupboards, sheds, along with others. Beginning jobs should always keyword be less complicated and less frustrating so that you have a better knowledge of working with woods and their resources. When the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Easy Woodworking Plans

Tools would be the means through which you can win the struggle of woodworking. Many men and women think that power tools are requires. But for novices, basic hand tools can be quite handy and more than useful in completing a job. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is needed for exact cuts and dimensions. The workbench, when mended with vises, provide ample space to work. As a primary tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make things considerably simple for you. When you purchase a hammer, always assess the equilibrium between the weight and endure. Always select a hardy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are various sorts of saws available on the market. Decide on a size that you could handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Having all of them can help you ahead of time woodworking. You might even buy keyword power screwdrivers since they make the job much faster.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape gives you the capacity to measure wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you demand a wrench. However, this isn’t a tool for beginners, but using it would make work simpler for you in a subsequent stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more helpful but they cost more. Low wattage power drills can make the job much simple.

8. Other small and fundamental tools – These include pens, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed price on woodworking projects. Based on the type of project that you want to complete, pricing can be determined. The simple the project, the less price it involves. But at the beginning purchasing the tools will probably be a little hefty. Therefore, it’s much better to fix a budget on the resources, then keyword on the project. Buying the fundamental tools will make certain you do not need to purchase any more material other than the wood ply.

Time and Directions

Directions are among the principal things which each and every beginner should follow. It is like the woodworking Bible. Instructions manual is very easy to understand the process, what to do and the way to do it. Time also plays a significant role in the building of woodworking jobs. Woodworking projects demand time and therefore it’s crucial for a novice to have ample quantity of time weekly.

Tips and Tricks for Beginners

There are no quick tips or tricks that would make the work easy. But the most indispensable thing keyword that can help you to reach success is proper planning. With proper planning and a strategy, it’s possible to achieve success immediately. If you understand the purpose of woodworking, then the thing you want to build, the tools you require to possess and the typical time it’s possible to devote every day; then you’re all set to go.

Conclusion, Easy Woodworking Plans

These strategies and education will make the woodworking projects and plans for novices quickly to finish. Always make sure you have all of the vital tools, materials, space prepared. Read the instructions for building an item handy. Proper strategy and preparation will help you to earn a great woodworking job for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Easy Woodworking Plans

Folks when looking for a way to pass time or want an alternative way to generate money they usually turn to a hobby that they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of projects one can consider. When starting out you need to be quite careful when choosing which job to start out with since you will find jobs that may be too tough for a newbie. But don’t be concerned about that because we are going to give you guidelines on the ideal way to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, so before you pick your project you have to know whether you have the available tools to work on that job. Try not to spend a good deal of money on buying equipment when starting out, purchase more gear as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any gap between the hand as well as the hands.

Woodwork Crafts – The Beginners Guide To Woodworking Easy Woodworking Plans

To keep yourself updated you have to disseminate with different brands tools and forests. Woodworking at home will provide you time to explore unique jobs and find out a lot of things. That is why it’s important to invest less money when starting out so you can manage to make mistakes and at any time learning about various projects.
It is very important you know more about different types of wood available for creating jobs. Anticipate carpenters use different types of wood quality for decorating pieces, learning which type of wood they use will allow you to prepare the wood you’ll need for specific jobs you might choose to pursue.
Once you know the basics of wood selection and the use of different tools now you can implement them in cutting out well wood pieces and putting wood together. Knowing what to do will assist you in building good jobs to satisfy your wants.

Easy Woodworking Plans practice makes perfect so be sure you practice your work daily if at all possible. Try out lots of layouts using a variety of tools so you can get the hang of working with the tools. When starting out you can make a range of mistakes but with time you will find out how to properly utilize them and produce quality projects.

|

The Benefits of Woodworking Easy Woodworking Plans

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever appreciate. You can begin on a shoestring with a minimum amount of tools and equipment. A small home workshop can generate a wide array of simple projects which will help you develop your creative and building skills while rewarding you with artistic and practical wood products that you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s talk about where you will do your woodworking, based on the size of your house, you may be able to produce a dedicated space to your woodworking tasks. This might be a reserved place on your garage or on your cellar. Sometimes, a detached shed or outbuilding may be ideal to prepare your very first shop. A heated store detached from your home provides one distinct advantage: better dust control. Without complex dust control methods, basement workshops will inevitably create dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems in which cold air yields located in the basement draw up dust into the upper levels of the house. Another advantage of detached workshops is, of course, the sound level. It’s possible to work without disturbing the rest of the household. A good compromise might be the garage of your property.

This might help decrease the difficulties of dust and noise, however based on where you live, a keyword garage workshop may not be sensible during extremes of hot or cold weather.

Starting Your First Woodworking Shop Easy Woodworking Plans

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes that they include more space to function in. Easy Woodworking Plans if you can have a dedicated place for a workshop all the better. Floor tools and bench top gear can remain in place from project to project. If this setup is not hopeless, at least try to make a chair area where equipment could be saved and pulled out as needed. If at all possible plan for inevitable growth as you get more tools and equipment. At the beginning, establish a seat area where you are able to store and use the majority of your gear, with a temporary expansion of your actions onto the garage or basement floor.

A basic workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. This will enable you to work comfortably while standing. Add a sturdy shelf beneath the bench to house your hands power tools along with a pegboard over the bench to hang other gear. Install a woodworking vice at one end of the seat on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Easy Woodworking Plans

The reach of your startup equipment will be largely based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring always purchase quality equipment. If you can afford it, then buy your quality tools in your regional construction and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other regional advertisements. There are plenty of quality gently used programs out there that belong to people who stumbled on that one molding project around the home or obtained tools as gifts that they won’t ever use. You can usually buy tools for these sellers for under half of the original price and save even more money should you create a package deal for all their unused equipment. Obviously, acquiring tools from private individuals will take extra time and perhaps travel expenditures. Weigh out the benefits of traveling around town to save a couple added bucks on a inexpensive piece of equipment. The extra expense of time and travel in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum quantity of hand equipment yet produced sophisticated and complex pieces. Focus on developing your skills with your start-up set of resources and avoid lamenting about the equipment you wished you’d.
Here’s a listing of the useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a nice pair of safety glasses which also offer some side protection for your eyes. Buy a quality oil collection that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually impair your vision and influence security. Avoid wearing goggles in a workshop. Most impair vision and dust up fast. You can avoid wearing all of them together in the event that you find them uneasy.

The next bit of crucial safety gear you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking can be noisy and long-term exposure to these noise levels can affect hearing and result in tinnitus and other hearing losses. With this setup I am protecting my eyes and my ears. I am keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw following the favorite name, this can end up being the most versatile instrument in a startup workshop. In fact, at the hands of a professional, a power hand saw could be employed to build an whole house. Eventually, you are going to want to purchase a table saw, but for now, a power hand saw for the woodworker on a budget enables him to perform cross cuts, rip cuts and even intricate angle cuts. As mentioned before get a quality manufacturer saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you start your next project. After selecting the proper saw install an excellent blade. Most saws include a starter blade of lesser quality even if they are a good saw. Keep this blade as a backup and install an excellent blade with carbide teeth. Start with a hybrid blade. These possess a balanced tooth count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool can’t just cut curves. It’s perfect for cutting holes in wood too like handle slots. Eventually, you’ll want to obtain a band saw. Bandsaws are even more flexible but a excellent floor unit can be costly. A jigsaw may be a good stop gap for the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the conventional 3/8 inch model. Down the road, the 1/2 inch version will prove to be more versatile. Through hard lessons learned, I have found that purchasing quality, in this case, is much more crucial than ever. Cheaper drills tend to get very short run times and need to be recharged often. Their long-term battery life will be bad and to make matters worse keyless chucks come loose and slip often. This is one annoyance you don’t need in your workshop. Buy an assortment of superior carbide tipped drill bits that are stored in a holder labeling each drill bit size. Make a habit of returning each drill bit to its prospective slot in the holder after each use. Last, get a pair of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer stays as the most versatile instrument in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop accidents happen. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and features a comfortable handle. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers usually have wood grips with inferior joints between the handle and head. The head usually comes loose and the tool becomes useless. Pick a title brand quality hammer at the 16-ounce range for overall work and a smaller finishing hammer for more complex work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more suited for rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can handle just about any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you’ll probably update to a floor version disc and belt sander. But for the time being, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited amounts of surface space. As you embark on the first few projects you’ll discover that your palm sander using a bit of effort can change rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and shape rough boards using 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an range of sandpaper sheets using an excess source of 100 grit paper. You’ll get this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Though low tech in concept, these tools allow you to taper borders, sew high stains and fix any imperfections in wood bits. {Start with a standard amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold down your wood bits as you work on them. Unfortunately, superior clamps are costly and it usually requires the beginner woodworker a couple of years to accumulate a detailed set of wood clamps. Start with a pair of long”pipe” clamps. Now the pipe has been replaced with long steel shafts, however, the structure remains the same. Get a set of the maximum clamps that you could spend. You may contact them for smaller adhesive jobs and enlarge them to their full length for bigger jobs.

Shop Vice: A shop vice installed in the end of the seat is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices using their timber clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enabled the user to rapidly open and close the jaws with no dull handle rotation. The wood beamed surfaces in your vice will occasionally require replacement. I prefer to utilize soft walnut in my vices that won’t crush or damage lots of the different forests that I utilize. Whether I am working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of your most frequently used tools. Buy a fantastic excellent name brand tape measure with a wide tape typically in the 25-foot selection. Although in your shop you might not be using the tape at these spans, the larger tape measures provide more rigid tapes that will not flop around and slip off the end of boards. Measuring when you are by yourself will be a lot simpler, and of course, quality tape steps can last for several decades.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will require additional sanding.

What is Woodworking? Starting Your First Woodworking Shop Easy Woodworking Plans

Woodworking is known as the construction or the production of objects from wood. You can create a lot of different objects from woodworking and these items are often as large as gazebos or as small as wooden toys. However big or small your private project maybe you’ll be quite likely to do that goal with woodworking. In addition, woodworking has many personal as well as psychological benefits! In this article, I am going to briefly identify some of these benefits for you.

Woodworking as a Career:

A good deal of individuals who like to use their hands have turned that love into a career through woodworking. Individuals who build things from wood are usually known keyword as carpenters. Carpenters can work on a variety of woodworking jobs and job types. For example, a few carpenters own their carpentry business and these folks have the luxury to place their work hours. This advantage allows carpenters the chance to spend more time with their families and have less job strain. Raising children is a very difficult task no matter what way you approach the endeavor! To get a carpenter who owns their own business, this job might not be hard because that individual is going to have more time to be part of his or her child’s life. By playing a larger part in the life of your child you’ll be having a larger impact on the type of character that child develops into, which is a huge concern for any loving parent. In addition to these benefits, carpentry may also have health benefits too.

The Benefits of Woodworking Easy Woodworking Plans

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood round a whole lot. This results in more physical activity, which leads to better physical health. Maintaining your body physically fit is really important and keyword will assist in preventing the incidence of various illnesses later on in life. By being physically fit you can reduce chances you will have a heart attack, have seizures, become a diabetic, and lower the odds of having a number of different disorders.

Easy Woodworking Plans, Do It Yourself Woodworking Saves Cash:

I feel like I paid way too much when I go to home improvement shops and buy patio furniture, and I am certain that I am not the only person that has felt like this! A successful small business owner once advised me to constantly raise the sales price of a product to double everything you obtained it for. This way, you can always reduce the product to 50 percent off and come out without acquiring any losses. This sounds like it might be exactly the same tactic that home improvement shops use in selling their wooden furniture solutions. Regardless, there’s a way which it is possible to get around paying the additional cash and that has to do with building it yourself. Fortunately, there are some really good woodworking products offering thousands of comprehensive woodworking keyword plans for hundreds of different project types. So, you can really build anything you need or see in any home improvement store. Doing something does require a bit of time but time is well spent when you end up saving hundreds of dollars as a result of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Tools