Easy Woodworking Project Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable thoughts and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and a few of those attributes along with a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, himself is also an educator and a member of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking whenever they’re following because all the thoughts and projects Ted’s source are easy to understand and easy. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive bundle, and he ended up making a really’complete’ woodworking source.

Many may still seem unsure if they need to be purchasing Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it even more challenging to make the ideal choice. There are actually many things that place Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit out of Ted’s woodworking Package. People that are just getting started will find the thoughts and projects in Ted’s package quite easy. No doubt, intricate carpentry is demanded; however, they will discover that it’s really easy to follow Ted’s simple step-by-step directions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who buy his package, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source that helps beginners learn a lot about woodworking. They’ll also be able to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers will be able to locate any project of their choice within this package quite readily, though there so many choices.

60-Day Iron Clad Money Back Guarantee

In general, this item is and people who purchase it will be backed by a 60-day guarantee, so when this woodworking bundle fails to satisfy them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long time to down because of its large dimensions. Nonetheless, with a high-speed internet connection it should download within a few minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects in Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nonetheless, they did not mind being overwhelmed considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design package is so comprehensive and vast it contains just about every woodworking project a woodworker might be considering building.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that are available across the net. Ted has done his best to guide them in every possible way he could, through simple to understand textual directions, clear pictures and even videos too.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking projects they will find within. So, it’s definitely worth buying!

Finding Woodworking Projects and Plans for Beginners Easy Woodworking Project Plans

Woodworking is one hobby that could also be a rewarding profession if you like to work with your hands and construct exquisite pieces of furniture from timber. When you learn the woodworking crafts and eventually become a fine woodworking craftsman, you’ll have the ability to construct all kinds of furniture, (beds, table, and chairs), with ease. You can then sell your finished woodworking jobs and make a handsome profit. Easy Woodworking Project Plans.

It requires time to become proficient at the craft of woodworking. The wonderful thing about working up to that expert craftsman level is you will be able to build some really wonderful furniture to you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit on your living space. It will be a topic of conversation when you have friends come over to visit. They’ll ask: How can you create it? Where did you get the woodworking plans? How long can it take to finish the job? What type of wood did you use? What type of tools did you use? Just how on earth did you create such a beautiful piece of furniture? As you speak about your work, a sense of pride will encounter you and don’t be surprised if your friends ask you to create one for them too!

Finding Woodworking Projects and Plans for Beginners Easy Woodworking Project Plans

If you’re thinking you are just too old or too young for woodworking, think again! You’re never too old or too young for such a fun hobby and it’s perfect for beginners!

Where to begin in Woodworking? Easy Woodworking Project Plans.

Begin with an idea in mind of what you would like to construct then get a excellent woodworking project plan that is geared toward beginners. There are several small woodworking projects for beginners available for sale from online woodworking retailers. A few woodworking plan suggestions for you thinking are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child just to mention a couple. Of course, you can begin with as grand a woodworking program as you pick. On the other hand, the chances are if you start out using a small woodworking project at first, you’ll have a better chance of keyword finishing the job.

Your woodworking project plan must incorporate some lists! Lists of: woodworking hardware, the quantity and type of wood needed, and the essential hand tools and power tools to finish the project. Note: A word of caution about purchasing woodworking tools. Only buy what you need to complete your instant or upcoming endeavor. This is important especially if you are a beginner and just starting out. Tools aren’t cheap. The newcomer needs good woodworking tools, but you can easily break the bank purchasing a great deal of tools you might not use all that often. If you do buy gear, buy quality. Do a bit of research and compare goods. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, finish punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking clamps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not forget the wood glue and a brush to spread the wood glue! Obviously, you will require a dry place to work and might need a set of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more woodworking hand tools and more woodworking power tools , but the idea is to purchase the crucial hand and power tools that novices will need. You may always add to your arsenal as you get experience!

Easy Woodworking Project Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you’ve bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to finish your project. But if you are not certain about what to do there is help available! There are lots of places that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of the many woodworking magazines out there. Each month the writers in woodworking magazines do a story about the best way to increase your woodworking craft. Whether it’s showing you the way to apply an end to a finished project, or how to create a mortise and tenon joint, something new could be heard each month. Next, is purchasing instructional DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Easy Woodworking Project Plans

If you’re a beginner and very interested in doing a DIY project for house then, woodworking can be fun. If you don’t have the right information, instruction, and ability, you might wind up spending more time and money than you originally meant to spend. As a novice woodworker, you need to have time and the correct tools. Having mentioned, there are a couple of essential factors that you need to keep in mind, before starting with any woodworking project.

1. If you are a beginner, you should first have to be somewhat interested in woodworking. Making something new with your hands is a particular sense. Don’t start a job if you’re not interested, as this may land you in a terrible location.

2. Think of the main reason behind making this woodworking project. Decide on the uses of this thing you are making.

3. Consider your abilities and analyze the time you have, before you start with a job.

4. Start jobs which you can finish. If you are in the midst of a work, then it’s better not to begin any project in any way.

Finding Woodworking Projects and Plans for Beginners Easy Woodworking Project Plans

If you maintain these vital things in mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires planning as much because it requires effort. So how do you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to choose the woodworking projects that you want to start with. As a newcomer, always select a project that has a very basic construct up or a very simple construction. A few simple to start projects comprise, bird feeder, chairs, shelves, etc.. The moment you get hold of the techniques, you could always move to the next level of woodworking jobs, such as cupboards, sheds, along with others. Beginning projects should always keyword be complicated and less frustrating so that you have a better comprehension of working with woods and their tools. When the job is selected, start selecting your tools.

Beginners Woodworking Tools, Easy Woodworking Project Plans

Tools would be the means whereby you can win the struggle of woodworking. A lot of men and women think that power tools are requires. However, for novices, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would require are:

1. Workbench – A workbench is needed for exact cuts and measurements. The workbench, when mended with vises, offer ample space to operate. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things considerably easy for you. When you buy a hammer, constantly assess the equilibrium between the weight and endure. Always select a hardy, yet lightweight item.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool helps you to cut woods at different sizes. There are different types of saws out there on the marketplace. Decide on a size which you could handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them can help you in advance woodworking. You might even buy keyword power screwdrivers as they make the work much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape gives you the capacity to measure wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you demand a wrench. Nonetheless, this isn’t a tool for novices, but using it would make work easier for you at a subsequent stage.

7. Drill – Drill makes it possible to make holes in timber. Low wattage power drills will make the task much easy.

8. Other small and basic tools – These include pens, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is no fixed cost on woodworking projects. Dependent on the sort of job that you would like to finish, pricing can be determined. The easy the project, the less price it involves. However, at the very beginning purchasing the tools will be somewhat hefty. Because of this, it is much better to resolve a budget first on the resources, then keyword on the project. Buying the basic tools will ensure that you do not need to buy any more material aside from the wood ply.

Time and Instructions

Directions are one of the primary things that every beginner should follow. It is like the woodworking Bible. Instructions guide is very easy to understand the process, what to do and how to do it. It keyword is a systematic guide for finishing the job. Time also plays a significant part in the construction of woodworking projects. Woodworking projects demand time and therefore it’s necessary for a beginner to have ample quantity of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. But the most indispensable thing keyword which can help you to achieve success is proper planning. With proper planning and a strategy, it’s possible to achieve success immediately. If you understand the purpose of woodworking, then the item you want to build, the resources you require in order to own and the average time it’s possible to give every day; then you are all set to go.

Conclusion, Easy Woodworking Project Plans

These tips and instruction will make the woodworking projects and strategies for novices fast to complete. Always ensure you have all of the vital tools, materials, space prepared. Keep the instructions for building an item handy. Proper strategy and preparation will allow you to earn a great woodworking project for your property.

|

How to Become a Master Woodworker From Your Own Home Easy Woodworking Project Plans

Folks if you’re trying to find a way to pass time or desire an alternative method to make money they generally turn into a hobby that they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are lots of jobs one can think of. When starting out you have to be very careful when choosing which job to start out with since you will find jobs which may be too difficult for a newbie. But do not worry about that since we are going to provide you tips on the ideal way to begin woodworking as a beginner.

The same as any other hobby woodworking demands some working equipment, therefore before you pick your project you have to know whether you’ve got the available tools to work on such a project. Try not to spend a lot of money on buying gear when starting out, buy more gear as you get more experience and become a professional carpenter. If you enjoy your hobby then there will be no difference between the hand and the normal hands.

Starting Your First Woodworking Shop Easy Woodworking Project Plans

To keep yourself updated you must disseminate with various brands tools and woods. Woodworking at home will give you time to explore different jobs and find out so many things. That’s why it’s very important to spend less money when starting out so you can manage to make mistakes and at any time learning about various jobs.
It is very important you know more about the different kinds of wood available for creating jobs. Anticipate carpenters use several types of wood quality for decorating bits, learning which type of wood that they use will allow you to prepare the wood you’ll need for certain projects you might choose to pursue.
As soon as you know the fundamentals of wood selection and the use of different tools now you can employ them in cutting out well wood pieces and putting wood together. Knowing what to do will help you in building good projects to fulfill your wants.

Easy Woodworking Project Plans practice makes perfect so make sure you practice your work every day if at all possible. Try out lots of designs utilizing various tools so that you may find the hang of working with the tools. When starting out you may make a range of mistakes but with time you will learn how to correctly utilize them and create quality projects.

|

The Benefits of Woodworking Easy Woodworking Project Plans

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever enjoy. You may get started on a shoestring with a minimum amount of tools and equipment. A small home workshop can generate a broad variety of simple projects which can help you develop your creative and building skills while rewarding you with artistic and practical wood products that you are able to enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let us talk about where you will do your woodworking, Depending on the size of your house, you may be able to produce a dedicated space into your woodworking tasks. This may be a reserved spot in your garage or in your basement. Sometimes, a detached shed or outbuilding may be perfect to prepare your first shop. A heated store detached from your home provides one distinct advantage: better pest management. Without complex dust control systems, basement workshops will inevitably create dust which travels into the living area of your house. This is very true in homes with forced air heating systems in which cold air yields located in the basement draw up dust into the upper levels of the home. Another advantage of detached workshops would be, of course, the noise level. You can work without bothering the rest of the household. A fantastic compromise could be the garage of your home.

This might help minimize the problems of dust and sound, however depending on where you reside, a keyword garage workshop might not be practical during extremes of hot or cold weather.

Starting Your First Woodworking Shop Easy Woodworking Project Plans

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes they add more space to function in. Easy Woodworking Project Plans if you can have a dedicated spot for a marathon all the better. Floor tools and bench top equipment can remain in position from project to project. If this installation is not impossible, at least attempt to make a chair area where equipment could be stored and pulled out as necessary. If possible plan for inevitable growth as you get more tools and gear. In the beginning, establish a bench area where you can shop and use most of your gear, with a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. That will enable you to work comfortably while standing. Insert a sturdy shelf below the seat to house your hand power tools and a pegboard over the seat to hang other gear. Install a woodworking at one end of your bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Easy Woodworking Project Plans

The reach of your startup equipment will be largely based on your financial plan. Whether you have got large financial resources or you are starting on a shoestring always buy quality equipment. If you can afford it, then purchase your quality tools at the local construction and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or other regional advertisements. You will find an abundance of quality lightly used programs out there which belong to individuals who stumbled on that one molding job around the house or received tools as gifts that they won’t ever utilize. You can usually buy tools for these sellers for less than half the initial cost and save even more money if you make a bundle deal for all their unused equipment. Obviously, acquiring tools from private individuals will require additional time and perhaps travel expenditures. Weigh out the advantages of traveling around town to save a few added bucks on a inexpensive piece of equipment. The excess expense of time and travel in these situations is usually justified when buying large ticket items such as table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a visit to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimum amount of hand gear yet produced sophisticated and intricate pieces. Concentrate on developing your skills with your startup set of resources and avoid lamenting about the equipment you wished you’d.
Here’s a listing of the more useful tools you’ll need to get started:
Safety Gear: Start as anticipated with eye protection. Get a decent pair of safety glasses which also offer some side protection for your eyes. Buy a quality acrylic set that will be scratch resistant. Progressive scratching of thinner plastic pairs will eventually hamper your vision and affect security. Avoid wearing gloves at a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together if you find them uneasy.

The next bit of critical safety gear you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking can be long-term and noisy exposure to those noise levels can affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire quicker when subjected to elevated noise levels. Select powerful hearing protection that you find comfortable and effective. Last, put on a cap to keep the dust out of your hair. I prefer a simple ball cap with my ear muffs and eye protection. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Often known as a skill saw after the popular name, this can prove to be the most versatile instrument in a startup workshop. In reality, in the hands of an expert, a power hand saw could be used to build an whole property. Eventually, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a funding empowers him to perform cross cuts, tear cuts and even intricate angle cuts. As mentioned earlier get a quality manufacturer saw. Avoid cheap unknown brands. All these are inclined to cut back and will burn out before you start your second project. After choosing the right saw install an excellent blade. Most skill saws come with a starter blade of lesser quality even if they are a fantastic saw. Keep this blade as a backup and install a quality blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will include excellent versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool cannot just cut corners. It’s perfect for cutting holes in wood too like handle slots. At some point, you’ll want to get a ring saw. Bandsaws are much more flexible but a quality floor unit could be expensive. A jigsaw may be a good stop gap to the novice woodworker.

Purchase an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss over the conventional 3/8 inch model. Through hard lessons learned, I have discovered that buying quality, in this case, is much more critical than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slide frequently. This is one annoyance you don’t need on your workshop. Purchase an range of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Create a habit of returning each drill piece to its potential slot at the holder after every use. Lastly, get a set of tough steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most versatile tool in the store, and often the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents happen. Although the most frequent, hammer injuries are usually of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, does not rust and features a comfortable handle. Most hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers usually have wood grips with inferior joints between the handle and head. The mind usually comes loose and the tool becomes useless. Select a name brand quality hammer at the 16-ounce scope for general work and also a smaller completing hammer for more complex work. Avoid using big framing hammers at the workshop and some other with dimpled mind tips. These types of hammers are more suited for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can manage just about any sanding requirements you’ve got as a beginner woodworker. As your woodworking skills evolve, you’ll probably update to a floor model disc and belt sander. But for the time being, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited amounts of surface area. As you embark on the first few projects you’ll find your palm sander using a bit of effort can change rough looking inventions into virtual functions of art! You can use your palm sander to sand and shape rough planks using 100 grit paper and later finish your job with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets with an extra source of 100 grit paper. You’ll get that this caliber of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Although low tech in theory, these tools allow you to taper borders, sew high stains and fix any imperfections in timber pieces. {Begin with a typical amount 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood bits as you operate on them. Unfortunately, superior clamps are costly and it normally takes the novice woodworker a few years to accumulate a detailed set of wood clamps. Start with a set of extended”pipe” clamps. Now the pipe was replaced with long steel shafts, but the structure remains the same. Get a set of the maximum clamps which you can afford. You may contact them for smaller glue jobs and enlarge them to their full length for bigger projects.

Shop Vice: A store vice installed in the end of your bench is perfect for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enabled the user to rapidly open and close the jaws with no tedious handle turning. The wood clamping surfaces in your vice will periodically need replacement. I prefer to utilize soft walnut in my vices which will not crush or damage many of the various woods that I utilize. Whether I am working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be one of the most frequently used tools. Purchase a good quality name brand tape measure with a wide tape typically in the 25-foot selection. Although in your store you may not be using the tape in these spans, the larger tape steps offer more rigid tapes which won’t flop around and slide off the end of boards. Assessing when you’re on your own will be a great deal simpler, and of course, quality tape measures can last for several years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the wood. Avoid oversized carpenter’s pencils. Their big flat leads are simply too coarse for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools will help you in marking the ideal angles as well as compound angles. Also, get an assortment of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find the Robertson format works great for many woodworking jobs and will be the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood files. The expense of glue through all of your jobs is a little cost consideration. Therefore, it is sensible to go with the best. I have also discovered over the years that I get the best results with both indoor and outdoor jobs when I use quality outside grade glue. These resin-based compounds unlike traditional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, Easy Woodworking Project Plans

The peaceful satisfaction of woodworking is a wonderful experience in this era of rushed lives, smartphones, and time-starved careers. With a minimal investment at the most rudimentary equipment and tools, everyone can learn the profitable abilities of his time-tested avocation and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Projects