Fast Wood Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable thoughts and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes along with a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an instructor and a part of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking when they’re following because most of the thoughts and projects Ted’s resource are easy to understand and easy. Ted McGrath spent two years exploring so he could gather enough material for an extensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many may still seem unsure whether they need to be buying Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it more difficult to make the ideal option. There are in fact many things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to profit from Ted’s woodworking Package. People who are only getting started will discover the thoughts and projects in Ted’s bundle quite easy. No doubt, intricate carpentry is involved; however, they will find it really simple to follow Ted’s simple step by step instructions. Presently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource which helps beginners learn a lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will be able to locate any project of their choice in this package quite easily, though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and those who purchase it will be endorsed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long period to down because of its large dimensions. Yet, using a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nevertheless, they did not mind being overwhelmed considering the fact that this package is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design bundle is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be interested in building.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that are available throughout the internet. Ted has done his best to direct them in every possible way he can, through easy to understand textual directions, clear images and even movies too.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find inside. So, it’s certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more innovative hand tools and more woodworking power tools here, but the idea is to buy the crucial hand and power tools that beginners will need. You can always increase your arsenal as you get experience!

Fast Wood Projects Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you’ve purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. However, if you’re unsure about what to do there is help available! There are lots of areas that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of the many woodworking magazines available. Every month the writers in woodworking magazines do a story on the best way to improve your woodworking craft. When it’s showing you the way to apply a finish to a finished job, or how to make a mortise and tenon joint, something new can be learned each month. Next, is buying educational DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to work with a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Fast Wood Projects

If you are just beginning and very interested in doing a DIY project for house then, woodworking can be interesting. If you do not have the right information, instruction, and ability, you might land up spending more money and time than you originally meant to spend. As a beginner woodworker, you need to have time and the correct tools. Having mentioned, there are a couple of essential factors you need to remember, before beginning with any woodworking project.

1. If you are a beginner, you should first have to be somewhat interested in woodworking. Creating something new with your own hands is a special sense. Don’t start a job if you are not interested, as this may land you in a bad location.

2. Consider the main reason for creating this woodworking project. Decide on the uses of this item you’re making.

3. Consider your skills and examine the time you have, until you begin with a project.

4. Start projects that you can finish. If you’re in the midst of some work, then it’s wise to not start any project at all.

The Benefits of Woodworking Fast Wood Projects

If you maintain those essential points in mind before you begin a woodworking project, it will become very easy for you to reach success. Woodwork requires preparation as much as it requires effort. So how can you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to opt for the woodworking jobs that you wish to start with. As a newcomer, always pick a project that has quite a basic build up or a very simple construction. Some easy to start projects include, bird feeder, benches, shelves, etc.. The moment you get hold of the techniques, you could always proceed to the next level of woodworking projects, such as cupboards, sheds, along with others. Beginning projects should always keyword be complicated and less frustrating so that you have a better comprehension of working with woods and their tools. Once the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Fast Wood Projects

Tools would be the ways whereby you will win the struggle of woodworking. Many men and women believe power tools are requires. However, for novices, basic hand tools can be quite convenient and more than helpful in completing a job. If woodworking is your hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for exact cuts and dimensions. Even the workbench, when mended with vises, provide ample space to work. As a key tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make things much simple for you. When you purchase a hammer, always check the balance between the weight and endure. Always select a hardy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at several sizes. There are various sorts of saws out there in the market. Decide on a size which you can deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them can help you in advance woodworking. You might even buy keyword energy screwdrivers as they make the job much faster.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape gives you the capacity to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you demand a wrench. Nonetheless, this is not a tool for beginners, but using it would make work simpler for you in a later stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more helpful but they cost more. Low wattage power drills will make the task much easy.

8. Additional small and fundamental tools – These include pens, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed cost on woodworking jobs. Based on the sort of project you want to complete, pricing could be determined. The simple the job, the less price it involves. However, at the beginning purchasing the tools will probably be a little hefty. Because of this, it is better to resolve a budget on the resources, then keyword on the undertaking. Buying the basic tools will ensure that you don’t have to buy any more material aside from the wood ply.

Time and Instructions

Directions are one of the principal things that each and every newcomer should follow. It’s like the woodworking Bible. Instructions guide is quite simple to comprehend the procedure, what to do and the way to get it done. It keyword is a systematic manual for finishing the project. Time also has a significant role in the building of woodworking projects. Woodworking projects demand time and so it’s crucial for a novice to have ample amount of time every week.

Tips and Tricks for Beginners

There are no quick tips or tricks that would make the work easy. But the most essential thing keyword which can allow you to achieve success is proper preparation. With proper planning and a plan, it is possible to achieve success immediately. If you understand the objective of woodworking, the thing that you want to build, the resources you need to possess and the average time you can give every day; then you’re ready to go.

Conclusion, Fast Wood Projects

These tips and education is likely to create the woodworking projects and plans for beginners quickly to complete. Always make sure you have all of the vital tools, materials, area ready. Keep the instructions for building a product handy. Proper strategy and planning will allow you to make a fantastic woodworking project for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Fast Wood Projects

People if you’re trying to find a way to pass time or desire an alternative method to make money they usually turn into a hobby that they enjoy. It’s very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of projects one can think of. When starting out you have to be quite cautious when choosing which project to begin with because there are projects that may be too difficult for a beginner. But do not be concerned about that since we will provide you tips on the ideal means to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working gear, so before you choose your project you need to know whether you have the available resources to work on such a job. Try not to invest a lot of money on purchasing equipment when starting out, purchase more equipment as you get more experience and become a professional carpenter. If you enjoy your hobby then there will not be any gap between the hand as well as the normal hands.

Finding Woodworking Projects and Plans for Beginners Fast Wood Projects

Woodworking in your home will give you time to research different jobs and learn so many things. That’s why it’s very important to spend less money when starting out so that you can manage to make errors and at any time learning about different jobs.
It is extremely important you know about the different kinds of wood available for making jobs. Anticipate carpenters utilize different kinds of wood quality for decorating pieces, learning what type of wood that they use will help you prepare the wood you’ll need for specific jobs you may choose to pursue.
Once you understand the basics of wood choice and the use of different tools now you can employ them in cutting well wood pieces and putting wood together. Knowing what to do will assist you in creating good projects to satisfy your needs.

Fast Wood Projects practice makes perfect so be sure you practice your work every day if possible. Try out a lot of layouts utilizing a variety of tools so you may find the hang of using the tools. When starting out you may make a number of mistakes but with time you will find out how to correctly utilize them and create quality projects.

|

Starting Your First Woodworking Shop Fast Wood Projects

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever enjoy. You may get started on a shoestring with a minimum number of gear and equipment. A small home workshop may produce a wide array of simple projects which will allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products which you can enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let’s talk about where you’ll do your woodworking, Depending on the size of your home, you may be able to create a dedicated space to your woodworking activities. This may be a reserved place on your garage or in your cellar. Sometimes, a detached shed or outbuilding may be perfect to prepare your first store. A heated store detached from your house offers one distinct advantage: better dust control. Without complex dust control methods, basement workshops will inevitably create dust that travels into the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns found in the cellar draw up dust into the top levels of the home. Another advantage of detached workshops is, clearly, the sound level. It’s possible to work without bothering the rest of the household. A good compromise might be the garage of your home.

This can help minimize the problems of dust and sound, however based on where you reside, a keyword garage workshop might not be practical during extremes of cold or hot weather.

Starting Your First Woodworking Shop Fast Wood Projects

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes that they include more space to function in. Fast Wood Projects if you’re able to have a dedicated place for a workshop all the greater. Floor tools and bench top equipment can remain in position from project to project. If this installation is not impossible, at least attempt to create a bench area where equipment could be saved and pulled out as needed. If at all possible plan for inevitable expansion as you get more tools and equipment. In the start, establish a bench area where you are able to store and use most of your equipment, using a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Insert a sturdy shelf below the seat to house your hands power tools and a pegboard above the bench to hang additional equipment. Put in a woodworking vice at one end of your seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Fast Wood Projects

The scope of your startup equipment will be largely based on your budget. Whether you have got big financial resources or you are starting on a shoestring always purchase quality equipment. If you can afford it, then buy your quality tools in the regional construction and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or alternative local advertisements. You will find an abundance of quality gently used programs out there which belong to people who embarked on that one molding job around the home or received tools as presents that they will never utilize. You can usually purchase tools for these sellers for less than half the initial cost and save even more money if you make a bundle deal for all their unused equipment. Of course, getting tools from private individuals will take additional time and perhaps travel expenditures. Weigh the advantages of traveling across town to save a couple extra dollars on a inexpensive piece of gear. The extra expense of time and travel in these situations is generally justified when purchasing large ticket items such as table saws, bandsaws or high finished tools like surface planers later on.
For smaller acquisitions, a visit to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimum amount of hand equipment yet produced sophisticated and complex pieces. Concentrate on developing your abilities with your startup set of resources and prevent lamenting about the equipment you wished you’d.
Here’s a listing of the more useful tools You Will Need to get started:
Safety Gear: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer you some side protection for your eyes. Purchase a quality acrylic collection that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will eventually hamper your vision and influence security. Avoid wearing goggles at a workshop. Most impair vision and dust up quickly. You can avoid wearing them all together if you find them uncomfortable.

The next bit of crucial safety gear that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking can be noisy and long-term exposure to those noise levels may affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire faster when exposed to high sound levels. Last, wear a cap to keep the dust from your hair. With this set up I am protecting my eyes and my ears. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often referred to as a skill saw following the popular brand name, this can prove to be the most flexible tool in a startup workshop. In reality, at the hands of an expert, a power hand saw could be used to construct an whole property. At some point, you are going to want to buy a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to perform cross cuts, rip cuts and even intricate angle cuts. As mentioned before get a quality manufacturer saw. Avoid cheap unknown brands. All these are inclined to cut back and will burn out before you even start your next job. After selecting the right saw install an excellent blade. Most skill saws come with a starter blade of lesser quality even if they’re a good saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Begin with a hybrid . These have a balanced tooth count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool cannot only cut corners. It is ideal for cutting holes in timber too like handle slots. Eventually, you’re going to want to obtain a band saw. Bandsaws are much more flexible but a quality floor unit could be costly. A jigsaw can be a good stop gap to the novice woodworker.

Buy an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck within the conventional 3/8 inch version. Down the road, the 1/2 inch version will prove to be versatile. Through hard lessons learned, I have found that buying quality, in this case, is much more critical than ever. Cheaper drills tend to get very short run times and have to be recharged frequently. Their long-term battery life tends to be poor and to make matters worse keyless chucks come loose and slip often. This is 1 annoyance you do not need in your workshop. Purchase an range of quality carbide tipped drill bits that are kept in a holder labeling each drill bit size. Create a habit of returning each drill piece to its potential slot in the holder after every use. Lastly, get a pair of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most versatile tool in the store, and often the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop accidents occur. Although the most ordinary, hammer injuries are often of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and features a comfortable grip. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with poor joints between the handle and head. The head typically comes loose and the tool becomes useless. Select a title brand quality hammer at the 16-ounce range for general work and also a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and any with dimpled head tips. These types of hammers are more appropriate for rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can manage pretty much any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you’ll probably update to a floor model disc and belt sander. However, for now, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you might find your palm sander using just a little bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough planks with 100 grit paper and after finish your job with 200 or even 300 grit paper. Buy an range of sandpaper sheets with an excess supply of 100 grit paper. You’ll get that this caliber of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Although low tech in theory, these tools allow you to taper edges, sew high stains and correct any imperfections in timber pieces. {Start with a standard amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold down your wood pieces as you operate on them. Unfortunately, superior clamps are expensive and it normally requires the beginner woodworker a few years to collect a detailed set of timber clamps. Begin with a set of long”pipe” clamps. Today the pipe has been replaced with long steel shafts, but the structure remains the same. Receive a set of the longest clamps which you could spend. You may contact them for smaller glue jobs and enlarge them to their full length for bigger projects.

Shop Vice: A store vice installed in the end of your seat is ideal for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces can securely hold wood bits without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enable the user to quickly open and close the limbs with no tedious handle rotation. The timber clamping surfaces in your vice will occasionally need replacement. I prefer to utilize soft pine in my vices that won’t crush or damage lots of the various forests that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be among the most frequently used tools. Purchase a good quality name brand tape measure with a broad tape typically from the 25-foot selection. Although in your shop you may not use the tape in these lengths, the bigger tape measures offer more rigid tapes that will not flop around and slide off the end of boards. Measuring when you are on your own will be a lot easier, and naturally, quality tape steps can endure for many years.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the timber. Avoid oversize carpenter’s pencils. Their big flat leads are just too rough for accurate measurement in the workshop.

Other Tool and Materials: Here are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools can help you in marking the ideal angles as well as compound angles. Also, get an assortment of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find the Robertson format works great for many woodworking jobs and will be the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood files. The expense of glue through all your projects is a minor cost consideration. Therefore, it makes sense to decide on the very best. I also have found over time that I receive the best results with both indoor and outdoor projects once I use quality outdoor grade adhesive. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Fast Wood Projects

The peaceful satisfaction of woodworking is an excellent adventure in this day and age of rushed lives, smartphones, and time-starved livelihood. With a minimal investment at the most rudimentary tools and equipment, anyone can learn the rewarding abilities of his time-tested avocation and revel in job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Wood veneer

In woodworking, veneer refers to thin slices of wood, usually thinner than 3 mm (1/8 inch),[1] that typically are glued onto core panels (typically, wood, particle board or medium-density fiberboard) to produce flat panels such as doors, tops and panels for cabinets, parquet floors and parts of furniture. They are also used in marquetry. Plywood consists of three or more layers of veneer. Normally, each is glued with its grain at right angles to adjacent layers for strength. Veneer beading is a thin layer of decorative edging placed around objects, such as jewelry boxes. Veneer is also used to replace decorative papers in Wood Veneer HPL. Veneer is also a type of manufactured board.

Veneer is obtained either by "peeling" the trunk of a tree or by slicing large rectangular blocks of wood known as flitches. The appearance of the grain and figure in wood comes from slicing through the growth rings of a tree and depends upon the angle at which the wood is sliced. There are three main types of veneer-making equipment used commercially:

Each slicing processes gives a very distinctive type of grain, depending upon the tree species. In any of the veneer-slicing methods, when the veneer is sliced, a distortion of the grain occurs. As it hits the wood, the knife blade creates a "loose" side where the cells have been opened up by the blade, and a "tight" side.

Video: Woodworking Projects