File Cabinet Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities that make it the”#1 woodworking Resource” and some of those qualities alongside a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, she’s also an instructor and a part of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking when they’re after because all the thoughts and jobs Ted’s resource are easy to comprehend and easy. Ted McGrath spent two years exploring so he could collect enough material for an extensive package, and he ended up making a truly’complete’ woodworking source.

Many might still appear unsure whether they should be purchasing Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it even more challenging to make the right choice. There are in fact many things that set Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. People who are only getting started will find the thoughts and jobs in Ted’s bundle quite simple. Without doubt, complicated carpentry is demanded; however, they will find it really simple to follow Ted’s simple step-by-step directions. Currently, both novice and experienced ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who buy his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source that will help beginners learn a whole lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers will be able to locate any project of their choice within this bundle quite readily, though there so many options.

60-Day Iron Clad Money Back Guarantee

In general, this item is and those who buy it will be endorsed by a 60-day warranty, so when this woodworking bundle fails to meet them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down due to its large size. Yet, using a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects in Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nevertheless, they didn’t mind being overrun considering the fact that this package is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design package is so thorough and vast it contains pretty much every woodworking project a woodworker may be considering constructing.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that are available across the net. Ted has done his best to guide them in every possible way he could, through easy to comprehend textual directions, clear pictures and even videos as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking jobs they will find inside. So, it is certainly worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking File Cabinet Woodworking Plans

Woodworking is 1 hobby that could also be a rewarding profession if you love to work together with your hands and build beautiful pieces of furniture from timber. When you learn the woodworking crafts and eventually become a nice woodworking craftsman, you will be able to construct all kinds of furniture, (beds, table, and chairs), effortlessly. You can then sell your finished woodworking projects and make a handsome profit. File Cabinet Woodworking Plans.

It requires time to become proficient at the craft of woodworking. The nice thing about working up to this expert craftsman degree is you’ll be able to create some really wonderful furniture for you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit in your living room. It will be a topic of conversation when you have friends come over to visit. They will ask: How did you create it? Where did you get the woodworking plans? How long can it take to complete the project? What type of wood did you use? What type of tools did you use? Just how on earth did you make such a beautiful item of furniture? As you speak about your job, a feeling of pride will come over you and also don’t be surprised if your friends ask you to create one for them too!

Starting Your First Woodworking Shop File Cabinet Woodworking Plans

If you’re thinking you are too old or too young for woodworking, then think again! You are never too old or too young for such an enjoyable hobby and it is ideal for beginners!

Where to begin in Woodworking? File Cabinet Woodworking Plans.

Start with a concept in your mind of what you would like to build then get a excellent woodworking project plan that is geared toward novices. There are several little woodworking projects for beginners available for sale from online woodworking merchants. A few woodworking program suggestions for you believing are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child simply to name a couple. Of course, you can begin with as grand a woodworking plan as you choose. However, the chances are if you start out using a little woodworking project initially, you will have a better prospect of keyword finishing the job.

Your woodworking project plan should include some lists! Length of: woodworking hardware, the amount and variety of wood required, and the required hand tools and power tools to complete the undertaking. Note: A word of caution about purchasing woodworking tools. Just buy what you want to complete your immediate or upcoming endeavor. This is important especially if you’re a beginner and just starting out. Tools are not cheap. The newcomer needs good woodworking tools, but you can easily break the bank purchasing a great deal of tools you might not utilize all that frequently. If you do buy gear, buy quality. Do a bit of research and compare products. Buy the best that you could afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking straps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and do not forget the wood glue and a brush to spread the wood adhesive! Of course, you’ll require a dry place to work and might require a set of saw horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more woodworking hand tools and much more woodworking power tools , but the concept is to buy the crucial hand and power tools that beginners will need. You can always add to your arsenal as you gain experience!

File Cabinet Woodworking Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you’ve purchased your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. But if you’re unsure about what to do there is help available! There are several areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those many woodworking magazines out there. Each month the writers in woodworking magazines do a story on the best way best to improve your woodworking craft. Whether it is showing you the way to apply an end to a finished project, or how to make a mortise and tenon joint, something new can be learned each month. Next, is purchasing instructional DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to work with a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners File Cabinet Woodworking Plans

If you’re a beginner and very interested in doing a DIY job for house then, woodworking could be fun. If you don’t have the proper information, education, and ability, you may land up spending more time and money than you initially meant to spend. As a novice woodworker, you need to have time and the appropriate tools. Having mentioned, there are a couple of essential factors you need to keep in mind, before starting with any woodworking project.

1. If you’re a beginner, you should first have to be somewhat interested in woodworking. Making something new with your own hands is a special feeling. Don’t start a job if you are not interested, as this may land you at a bad place.

2. Consider the primary reason behind making this woodworking project. Choose the uses of this item you’re making.

3. Consider your skills and examine the time that you have, before you start with a project.

4. Start projects that you’re able to complete. If you’re in the middle of a work, then it’s better not to start any project in any way.

The Benefits of Woodworking File Cabinet Woodworking Plans

If you keep those vital things in mind before you begin a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much as it requires effort. So how can you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to choose the woodworking projects you want to start with. As a beginner, always select a project which has a very basic build up or a simple construction. Some easy to start projects include, bird feeder, benches, shelves, etc.. The moment you get hold of these techniques, you can always proceed to the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning jobs should keyword be less complicated and less bothersome so you have a better knowledge of working with forests and their resources. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, File Cabinet Woodworking Plans

Tools would be the means through which you will win the battle of woodworking. Many men and women believe power tools are requires. However, for beginners, basic hand tools can be very handy and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would require would be:

1. Workbench – A workbench is required for precise cuts and dimensions. Even the workbench, when fixed with vises, offer ample space to work. As a primary tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer can make matters much easy for you. When you purchase a hammer, always assess the equilibrium between the weight and endure. Always select a hardy, yet lightweight item.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool helps you to cut forests at several sizes. There are different types of saws available in the marketplace. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Having all of them will help you in advance woodworking. You can even purchase keyword power screwdrivers as they make the job much quicker.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. However, this is not a tool for beginners, but having it might make work easier for you in a subsequent stage.

7. Drill – Drill makes it possible to make holes in timber. Power drills are more useful but they cost more. Low wattage power drills can make the job much simple.

8. Additional small and basic tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s no fixed price on woodworking projects. Dependent on the type of project that you would like to finish, pricing could be determined. The simple the job, the less price it involves. However, at the beginning buying the tools will be somewhat hefty. Because of this, it is much better to fix a budget first on the tools, then keyword on the undertaking. Buying the fundamental tools will ensure that you don’t have to buy any more material other than the timber ply.

Time and Directions

Directions are one of the principal things which every beginner should follow. It is like the woodworking Bible. Instructions manual is very simple to comprehend the procedure, what to do and how to do it. Time also has a significant part in the construction of woodworking projects. Woodworking projects require time and so it is necessary for a novice to have ample quantity of time weekly.

Ideas for Beginners

There aren’t any quick tips or suggestions that would make the work easy. But the most essential thing keyword that can allow you to reach success is proper planning. With appropriate planning and a strategy, it’s possible to achieve success immediately. If you understand the objective of woodworking, the thing that you need to build, the tools you need to own and the typical time you can give daily; then you are ready to go.

Conclusion, File Cabinet Woodworking Plans

These tips and instruction is likely to make the woodworking projects and plans for beginners fast to finish. Always make sure that you have all the essential tools, materials, space ready. Read the instructions for building a product handy. Appropriate strategy and preparation will allow you to make a fantastic woodworking job for your home.

|

Starting Your First Woodworking Shop File Cabinet Woodworking Plans

People if you’re trying to find a way to pass time or want an alternate method to generate money they generally turn into a hobby that they enjoy. It’s very exciting to do and everyone can get started.

When doing woodworking at home there are a lot of projects one can think of. When starting out you have to be very cautious when choosing which project to start out with since you will find jobs which may be too tough for a newbie. But do not be concerned about that because we will provide you tips on the right means to begin woodworking as a beginner.

The same as any other hobby woodworking requires some working equipment, so before you pick your job you have to be aware of if you’ve got the available tools to work on that job. Try not to spend a lot of cash on purchasing equipment when starting out, buy more gear as you get more experience and become a professional carpenter. Should you enjoy your hobby then there will not be any difference between the artistic hand as well as the normal hands.

Woodwork Crafts – The Beginners Guide To Woodworking File Cabinet Woodworking Plans

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking at home will give you time to research different jobs and learn a lot of things. That’s why it’s important to invest less money when starting out so you can manage to make errors and at any time learning about various jobs.
It’s extremely important that you know about different kinds of wood available for creating jobs. Expect carpenters use different types of wood quality for decorating bits, learning what type of wood that they use can help you prepare the wood you’ll need for specific projects you may want to pursue.
As soon as you understand the fundamentals of wood selection and the usage of different tools now you can employ them in cutting out well wood pieces and putting wood together. Knowing what to do can assist you in creating good projects to satisfy your wants.

File Cabinet Woodworking Plans practice makes perfect so be sure that you practice your work daily if at all possible. Try out lots of layouts using a variety of tools so you can find the hang of working with the tools. When starting out you can earn a number of mistakes but with time you will learn how to properly utilize them and create quality projects.

|

The Benefits of Woodworking File Cabinet Woodworking Plans

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You may begin on a shoestring with a minimum number of gear and equipment. A small home workshop can generate a wide variety of simple projects that can allow you to develop your creative and building abilities while rewarding you with practical and artistic wood products that you can appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let’s discuss where you will perform your woodworking, based on the dimensions of your home, you might be able to create a dedicated space to your woodworking activities. This may be a reserved place on your garage or in your basement. In some cases, a detached shed or outbuilding might be ideal to prepare your very first store. A heated shop detached from your home offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably create dust which travels into the living area of your home. This is very true in homes with forced air heating systems where cold air yields located in the cellar draw up dust into the top levels of the home. Another benefit of detached workshops is, clearly, the noise level. You can work without bothering the rest of the household. A good compromise might be the garage of your home.

This might help minimize the difficulties of dust and sound, however depending on where you live, a keyword garage layout might not be sensible during extremes of hot or cold weather.

Starting Your First Woodworking Shop File Cabinet Woodworking Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they add more space to work in. File Cabinet Woodworking Plans if you’re able to have a dedicated spot for a workshop all the better. Floor tools and bench top equipment can stay in place from project to project. If this installation is not hopeless, at least try to make a chair area where equipment could be saved and pulled out as needed. If possible plan for inevitable growth as you get more tools and gear. In the start, establish a bench area where you can store and use the majority of your gear, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. This will let you work comfortably while standing. Insert a sturdy shelf below the seat to home your hands power tools along with a pegboard over the seat to hang additional equipment. Install a woodworking vice at one end of your bench on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, File Cabinet Woodworking Plans

The scope of your start-up equipment will be largely based on your budget. Whether you’ve got large financial resources or you are starting on a shoestring always purchase quality equipment. If you can afford it, then buy your quality tools in your regional building and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or other regional advertisements. There are plenty of quality lightly used programs out there that belong to individuals who embarked on that 1 molding job around the house or obtained tools as presents which they won’t ever use. You can usually purchase tools for all these sellers for less than half of the initial cost and save even more money if you create a package deal for all their unused equipment. Of course, acquiring tools from private people will take extra time and possibly travel expenses. Weigh the benefits of traveling around town to save a few added dollars on a cheap piece of equipment. The extra cost of time and travel in these scenarios is generally justified when purchasing large ticket items like table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a trip to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal amount of hand equipment yet produced sophisticated and intricate pieces. Focus on developing your abilities with your startup set of resources and prevent lamenting about the gear you wished you’d.
Here is a checklist of the useful tools you’ll need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer you some side protection to your eyes. Buy a quality acrylic collection that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will eventually impair your vision and affect security. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of crucial safety equipment that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking may be noisy and long-term exposure to those noise levels can affect hearing and result in tinnitus and other hearing losses. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Often referred to as a skill saw after the favorite brand name, this can end up being the most flexible tool in a startup workshop. In fact, at the hands of an expert, a power hand saw could be used to build an entire house. At some point, you’ll want to purchase a table saw, but for now, a power hand saw for the woodworker on a funding enables him to do cross cuts, rip cuts and even intricate angle cuts. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. These tend to cut back and will burn out before you start your next project. After selecting the right saw install an excellent blade. Most skill saws include a starter blade of lower quality even if they are a fantastic saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will include great versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument cannot just cut curves. It’s ideal for cutting holes in wood too like handle slots. Eventually, you’ll want to obtain a band saw. Bandsaws are much more flexible but a excellent floor unit could be expensive. A jigsaw can be a good stop gap to the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch model. Down the road, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have found that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their long-term battery life will be bad and to make matters worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t need on your workshop. Purchase an assortment of quality carbide tipped drill bits which are kept in a holder labeling each drill bit size. Create a habit of returning each drill piece to its potential slot at the holder after every use. Last, get a pair of tough steel driver bits. Your drill may also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer remains as the most versatile instrument in the store, and often the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents happen. Even though the most frequent, hammer accidents are often of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and features a comfortable grip. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Select a name brand quality hammer at the 16-ounce range for general work and also a smaller finishing hammer for more complex work. Avoid using big framing hammers at the workshop and some other with dimpled mind tips. These kinds of hammers are more appropriate for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can manage just about any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you will likely update to a floor version disc and belt sander. However, for now, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface space. As you embark on the first few projects you’ll find your palm sander using just a little bit of effort can transform rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and shape rough planks using 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an range of sandpaper sheets using an excess supply of 100 grit paper. You’ll find that this caliber of paper the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Though low tech in concept, these tools enable you to taper borders, flatten high spots and correct any imperfections in wood bits. {Start with a standard amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold down your wood pieces as you operate on them. Unfortunately, superior clamps are costly and it normally takes the beginner woodworker a few years to accumulate a comprehensive set of timber clamps. Begin with a set of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, however, the structure is still the same. Receive a pair of the longest clamps that you could afford. You can get in touch with them for smaller adhesive jobs and expand them to their entire length for larger projects.

Shop Vice: A shop vice installed at the end of your seat is ideal for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood bits without marring or damaging them. A number of the better vices offer you rapid release mechanisms that enabled the user to quickly open and close the jaws without tedious handle rotation. The timber clamping surfaces on your vice will occasionally need replacement. I prefer to use soft walnut in my vices that won’t crush or damage many of the various forests that I work with. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be among your most often used tools. Purchase a good excellent name brand tape measure with a broad tape usually from the 25-foot range. Even though in your shop you might not use the tape in these spans, the bigger tape steps offer more rigid tapes that will not flop around and slip off the end of planks. Assessing when you’re on your own will be a lot simpler, and naturally, quality tape steps can endure for several years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will need extra sanding. Avoid oversized carpenter’s pencils. Their large flat leads are simply too coarse for accurate measurement in the workshop.

Other Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools will assist you in marking the ideal angles in addition to chemical angles. Additionally, get an range of flat, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I discover that the Robertson format works great for many woodworking projects and is the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood documents. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and fixing small mistakes on the way.

Adhesives: Not many glues are made equal. Stay away from inexpensive house brands sold as carpenter’s glue. The cost of adhesive through all of your jobs is a little cost consideration. Therefore, it makes sense to decide on the very best. I also have discovered over time that I get the best results with both indoor and outdoor projects when I use quality outside grade glue. All these resin-based compounds unlike traditional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, File Cabinet Woodworking Plans

The peaceful satisfaction of woodworking is a wonderful experience in this era of hurried lives, smartphones, and time-starved livelihood. With a minimum investment at the most rudimentary equipment and tools, everyone can learn the rewarding skills of his time-tested hobby and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Tools