Fine Woodworking Trestle Table | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and a few of those qualities alongside a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, she’s also an instructor and a part of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking when they are following because all the thoughts and jobs Ted’s source are simple to understand and simple. Ted McGrath spent two years exploring so that he could collect enough material for an extensive bundle, and he ended up creating a really’complete’ woodworking source.

Many might still seem unsure if they need to be purchasing Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it even more challenging to make the ideal option. There are in fact lots of things that place Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. People who are just getting started will discover the ideas and projects in Ted’s bundle quite easy. No doubt, intricate carpentry is demanded; nonetheless, they will find it really easy to follow Ted’s easy step-by-step directions. Presently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who buy his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource that will help beginners learn a lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers will have the ability to locate any job of their choice within this package quite easily, even though there numerous choices.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and those who purchase it will be backed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long time to down due to its large size. Nonetheless, using a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overrun considering how this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be considering constructing.

This woodworking package made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking packages that can be found throughout the net. Ted has done his very best to guide them in every possible way he could, through easy to understand textual instructions, clear images and even movies as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find within. Therefore, it is definitely worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Fine Woodworking Trestle Table

Woodworking is one hobby that could also be a rewarding career if you love to work with your hands and construct exquisite pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a fine woodworking craftsman, you’ll have the ability to construct all types of furniture, (beds, table, and chairs), effortlessly. You can then sell your finished woodworking projects and make a handsome profit. Fine Woodworking Trestle Table.

It requires time to become proficient at the craft of woodworking. The wonderful thing about working up to that expert craftsman degree is you will be able to create some really wonderful furniture for you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit in your living space. It’ll be a topic of conversation when you have friends come over to see. They’ll ask: How did you create it? How long did it take to complete the project? What kind of tools did you use? How on earth did you create such a gorgeous item of furniture? As you discuss your work, a sense of pride will come over you and also do not be surprised if your friends ask you to create one for them too!

Finding Woodworking Projects and Plans for Beginners Fine Woodworking Trestle Table

If you’re thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such a fun hobby and it is perfect for beginners!

Where to begin in Woodworking? Fine Woodworking Trestle Table.

Start with a concept in your mind of what you would like to build and then get a really good woodworking project plan that is geared toward beginners. There are several little woodworking projects for beginners available for purchase from online woodworking merchants. A couple of woodworking program suggestions to get you thinking really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child just to mention a couple. Obviously, you can begin with as grand a woodworking plan as you choose. However, the odds are if you start out using a small woodworking project at first, you will have a better chance of keyword completing the job.

Your woodworking project plan must include some lists! Length of: woodworking hardware, the amount and type of wood required, and the required hand tools and power tools to finish the undertaking. Note: A word of caution about purchasing woodworking tools. Only buy what you need to finish your instant or upcoming project. This is important especially if you’re a beginner and just starting out. Tools aren’t cheap. The beginner needs good woodworking tools, but it is simple to break the bank buying a great deal of tools you may not utilize all that often. When you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you could afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, finish punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking clamps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and don’t forget the wood glue and a brush to spread the wood glue! Of course, you will need a dry area to work and might need a pair of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more woodworking hand tools and much more woodworking power tools , but the idea is to purchase the essential hand and power tools which beginners will need. You can always increase your toolbox as you get experience!

Fine Woodworking Trestle Table Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. But if you are not certain about what to do there is help available! There are lots of places that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of the many woodworking magazines available. Every month the writers in woodworking magazines do a story on how to improve your woodworking craft. When it’s showing you the way to apply a finish to a completed job, or how to create a mortise and tenon joint, something new could be learned each month. Next, is buying educational DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to use a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Starting Your First Woodworking Shop Fine Woodworking Trestle Table

If you are just beginning and very interested in doing a DIY job for house afterward, woodworking can be fun. If you do not have the right information, instruction, and ability, you might wind up spending more money and time than you initially meant to spend. As a beginner woodworker, you want to have space, time and the appropriate tools. Having mentioned, there are a couple of essential factors you should remember, before beginning with any woodworking project.

1. If you are just beginning, you should first need to be somewhat interested in woodworking. Creating something new with your own hands is a particular sense. Do not begin a project if you’re not interested, because this might land you in a terrible location.

2. Consider the primary reason behind creating this woodworking project. Decide on the uses of the thing you are making.

3. Consider your abilities and analyze the time you have, before you start with a job.

4. Start jobs which you’re able to complete. If you’re in the middle of a work, then it’s wise to not start any project in any way.

Starting Your First Woodworking Shop Fine Woodworking Trestle Table

If you keep those vital things in your mind before you begin a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires preparation as much because it requires effort. So how can you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to choose the woodworking jobs that you want to begin with. As a beginner, always select a project that has quite a basic build up or a simple construction. A few easy to begin projects comprise, bird feeder, chairs, shelves, etc.. The moment you get hold of the techniques, you could always move to the next level of woodworking projects, such as cabinets, sheds, along with others. Beginning projects should keyword be less complicated and less bothersome so you have a better knowledge of working with woods and their tools. Once the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Fine Woodworking Trestle Table

Tools would be the ways whereby you will win the battle of woodworking. A lot of men and women think that power tools are needs. However, for beginners, basic hand tools can be quite convenient and more than helpful in completing a project. If woodworking is the hobby, then a few tools that you would demand are:

1. Workbench – A workbench is required for precise cuts and measurements. The workbench, when mended with vises, offer ample space to operate. As a key tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer will make things considerably easy for you. When you buy a hammer, constantly check the balance between the weight and endure. Always select a hardy, yet lightweight item.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool helps you to cut woods at different sizes. There are various sorts of saws available on the market. Choose a size that you can handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian kinds and standard flat type. Having all of them can help you ahead of time woodworking. You might also buy keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape gives you the capacity to quantify wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you require a wrench. However, this isn’t a tool for novices, but using it might make work easier for you in a subsequent stage.

7. Drill – Drill helps you create holes in wood. Low wattage power drills will make the job much simple.

8. Other small and fundamental tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s not any fixed cost on woodworking jobs. Dependent on the sort of job you want to finish, pricing could be set. The simple the job, the less cost it involves. However, at the very beginning purchasing the tools will be somewhat hefty. Therefore, it is much better to resolve a budget first on the tools, then keyword on the project. Buying the basic tools will make certain you don’t have to buy any more material aside from the timber ply.

Time and Instructions

Directions are among the principal things that every newcomer should follow. Instructions manual is quite simple to understand the procedure, what to do and how to do it. It keyword is a systematic guide for finishing the project. Time also plays a significant role in the building of woodworking projects. Woodworking projects require time and therefore it is crucial for a beginner to have ample amount of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most essential thing keyword which can allow you to reach success is proper planning. With appropriate planning and a plan, it is likely to achieve success immediately. If you understand the objective of woodworking, then the item that you need to build, the tools you require to own and the average time you can devote every day; then you’re all set to go.

Conclusion, Fine Woodworking Trestle Table

All these strategies and instruction is likely to create the woodworking projects and plans for novices quickly to finish. Always make sure that you have all of the essential tools, materials, space ready. Keep the instructions for constructing an item handy. Appropriate strategy and preparation will allow you to make a fantastic woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners Fine Woodworking Trestle Table

Folks if you’re trying to find a way to pass time or want an alternate way to generate money they generally turn to a hobby they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of jobs one can consider. When starting out you have to be very careful when choosing which job to begin with because you will find jobs that may be too tough for a beginner. But do not be concerned about that since we are going to give you guidelines on the ideal way to start woodworking as a beginner.

Just like any other hobby woodworking requires some working gear, therefore before you pick your project you have to know if you’ve got the available resources to work on that job. Try not to spend a lot of cash on buying equipment when starting out, buy more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there will be no gap between the hand as well as the normal hands.

The Benefits of Woodworking Fine Woodworking Trestle Table

To keep yourself updated you have to disseminate with different brands tools and woods. Woodworking at home will give you time to research different projects and learn a lot of things. That is why it’s important to spend less money when starting out so that you can manage to make mistakes and at any time learning about different projects.
It’s very important you know more about different kinds of wood available for making projects. Anticipate carpenters utilize different kinds of wood quality for decorating bits, learning which type of wood they use will allow you to prepare the wood you’ll need for certain projects you may want to pursue.
As soon as you understand the basics of wood selection and the use of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do will help you in building good projects to satisfy your needs.

Fine Woodworking Trestle Table practice makes perfect so be sure you practice your work daily if possible. Try out a lot of designs using a variety of tools so you can get the hang of using the tools. When starting out you can make a range of mistakes but with time you will learn how to properly use them and create quality projects.

|

Starting Your First Woodworking Shop Fine Woodworking Trestle Table

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You can begin on a shoestring with a minimum amount of tools and equipment. A small home workshop can produce a broad variety of simple projects that will help you develop your creative and building abilities while rewarding you with practical and artistic wood products that you are able to enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let’s discuss where you’ll do your woodworking, Depending on the dimensions of your home, you might be able to create a dedicated space to your woodworking tasks. This might be a reserved spot in your garage or in your cellar. In some cases, a detached shed or outbuilding might be ideal to set up your very first store. A heated shop detached from your house provides one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably produce dust that travels into the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns located in the cellar draw dust up into the top levels of the house. Another advantage of detached workshops is, of course, the noise level. You can work without disturbing the rest of the family. A fantastic compromise could be the garage of your home.

This can help minimize the difficulties of dust and sound, however depending on where you reside, a keyword garage layout may not be practical during extremes of cold or hot weather.

The Benefits of Woodworking Fine Woodworking Trestle Table

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they add more space to function in. Fine Woodworking Trestle Table if you can have a dedicated place for a marathon all the greater. Floor tools and bench top equipment can stay in place from project to project. If this setup is not hopeless, at least attempt to create a bench area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and equipment. At the beginning, establish a bench area where you are able to shop and use most of your equipment, using a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. Insert a sturdy shelf beneath the bench to home your hand power tools along with a pegboard over the bench to hang other gear. Install a woodworking at one end of your seat on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Fine Woodworking Trestle Table

The scope of your startup equipment will be largely based on your budget. Whether you have got big financial resources or you’re starting on a shoestring always purchase quality gear. If you can afford it, purchase your quality tools in your local construction and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or other local advertisements. You will find an abundance of quality lightly used tools out there that belong to people who embarked on that one molding job around the home or obtained tools as presents that they won’t ever use. You can usually purchase tools for all these sellers for less than half the initial cost and save even more money should you create a package deal for all their unused equipment. Obviously, acquiring tools from private people will require additional time and possibly travel expenditures. Weigh the advantages of traveling across town to save a few extra bucks on a inexpensive piece of equipment. The extra cost of time and travel in these scenarios is generally justified when purchasing large ticket items such as table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a visit to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimal quantity of hand equipment yet generated sophisticated and intricate bits. Focus on developing your abilities with your start-up set of resources and prevent lamenting about the equipment you wished you’d.
Here’s a listing of the useful tools you’ll need to get started:
Safety Gear: Start as expected by eye protection. Get a nice pair of safety glasses which also offer you some side protection for your eyes. Purchase a quality acrylic collection that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually hamper your vision and affect security. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You can avoid wearing them all together if you find them uncomfortable.

The next piece of critical safety gear that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking may be long-term and noisy exposure to these noise levels may affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most employees tire quicker when subjected to elevated sound levels. Last, wear a cap to keep the dust from your hair. With this setup I am protecting my eyes and my ears. I’m keeping the dust from my hair. I’m all set!

Power Hand Saw: Often referred to as a skill saw after the favorite brand name, this can prove to be the most versatile instrument in a start-up workshop. In fact, at the hands of an expert, a power hand saw could be employed to build an entire house. Eventually, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a budget empowers him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned earlier get an excellent manufacturer saw. Stay away from cheap unknown brands. These tend to cut back and will burn out before you even start your next job. After selecting the right saw put in an excellent blade. Most saws come with a starter blade of lower quality even if they’re a good saw. Keep this blade as a backup and put in a quality blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will add excellent versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool cannot just cut corners. It is ideal for cutting holes in timber also like manage slots. At some point, you’re going to want to obtain a ring saw. Bandsaws are much more versatile but a quality floor unit can be costly. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the standard 3/8 inch version. Down the road, the 1/2 inch version will end up being more versatile. Through tough lessons learned, I have found that purchasing quality, in this case, is much more crucial than ever. Cheaper drills have a tendency to have very short run times and have to be recharged often. Their battery life tends to be poor and to make matters worse keyless chucks come loose and slide frequently. This is 1 annoyance you do not want on your workshop. Buy an assortment of quality carbide tipped drill bits that are stored in a holder tagging each drill bit size. Create a habit of returning each drill bit to its prospective slot in the holder after each use. Last, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer remains as the most flexible tool in the shop, and often the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop accidents occur. Even though the most ordinary, hammer accidents are usually of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable handle. Most hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers generally have wood grips with poor joints between the head and handle. The head usually comes loose and the tool becomes useless. Pick a name brand quality hammer in the 16-ounce range for overall work and a smaller completing hammer for more intricate work. Avoid using large framing hammers in the workshop and any with dimpled head tips. These kinds of hammers are more appropriate to rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can handle pretty much any trimming requirements that you’ve got as a novice woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and even limited quantities of surface area. As you embark on your first few projects you’ll find that your palm sander using a little bit of effort can transform rough looking creations into virtual works of art! You can use your palm sander to sand and form rough planks using 100 grit paper and later finish your job with 200 or 300 grit paper. Purchase an range of sandpaper sheets using an excess source of 100 grit paper. You’ll get this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in theory, these tools enable you to taper edges, flatten high spots and correct any imperfections in timber bits. {Start with a standard amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold down your wood pieces as you work on them. Unfortunately, good clamps are expensive and it usually requires the beginner woodworker a couple of years to accumulate a comprehensive set of timber clamps. Start with a pair of long”pipe” clamps. Now the pipe has been replaced with long steel shafts, however, the structure is still the same. Get a pair of the maximum clamps which you can spend. You may contact them for smaller adhesive jobs and expand them to their entire length for larger jobs.

Shop Vice: A shop vice installed in the end of the seat is perfect for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer quick release mechanisms that enable the user to rapidly open and close the limbs without dull handle rotation. The wood clamping surfaces in your vice will occasionally require replacement. I would rather utilize soft pine in my vices that will not crush or damage many of the different forests that I utilize. Whether I am working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among the most often used tools. Buy a fantastic excellent name brand tape measure with a broad tape usually from the 25-foot range. Although in your shop you might not use the tape at these spans, the bigger tape measures offer more rigid tapes that will not flop around and slide off the end of planks. Assessing when you’re by yourself will be a great deal simpler, and of course, quality tape measures can endure for several decades.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need additional sanding. Avoid oversized carpenter’s pencils. Their large flat leads are simply too coarse for precise measurement in the workshop.

Other Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools will help you in marking the right angles as well as compound angles. Additionally, get an range of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find the Robertson format works best for most woodworking projects and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood documents. The expense of glue through all of your projects is a minor cost consideration. For that reason, it makes sense to decide on the very best. I also have found over the years that I get the best results with both indoor and outdoor projects once I use quality outside grade adhesive. These resin-based compounds unlike conventional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Fine Woodworking Trestle Table

The peaceful satisfaction of woodworking is an excellent experience in this day and age of hurried lives, smartphones, and time-starved careers. With a minimal investment at the most basic tools and equipment, everyone can learn the profitable abilities of his time-tested hobby and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Trestle table

A trestle table is an item of furniture consisting of two or three trestle supports linked by a longitudinal cross-member over which a board or tabletop is placed.[1] In the Middle Ages, the trestle table was often little more than loose boards over trestle legs for ease of assembly and storage.[2] This simple, collapsible style remained the most common Western form of table until the 16th century, when the basic trestle design gave way to stronger frame-based structures such as gateleg and refectory tables.[3] Ease of assembly and storage has made it the ideal occasional table, and it remains a popular form of dining table, as those seated are not so inconvenienced as they might be with the more usual arrangement of a fixed leg at each corner.

Trestle tables figure prominently in the traditional Americana style of household furnishings, usually accompanied by spindle-backed chairs.[4] The trestles in this case are normally of much higher quality, often made of oak and braced with a stretcher beam using a keyed tenon through the centre of each trestle. These typically support a high-quality waxed oak tabletop.[5] Trestle tables are also used in the event furniture industry, they are the main table used at weddings and other types of venues today.[6]

The trestle (also tressle, tressel and threstle) is (rarely) used as a charge in heraldry, and symbolically associated with hospitality (as historically the trestle was a tripod used both as a stool and to support tables at banquets).[7]

Video: Woodworking Tools