Free Carpentry Classes | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and some of those attributes along with a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an educator and a part of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they are following because all the ideas and jobs Ted’s resource are easy to understand and simple. Ted McGrath spent two years exploring so he could collect enough material for an extensive package, and he ended up making a truly’complete’ woodworking resource.

Many might still seem unsure if they should be purchasing Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it more difficult to make the ideal option. There are actually many things that set Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit out of Ted’s woodworking Package. People that are only getting started will discover the ideas and projects in Ted’s package quite easy. Without doubt, complicated carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s simple step-by-step directions. Currently, both beginner and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source which will help beginners learn a whole lot about woodworking. They will also be able to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers are going to be able to find any project of their choice in this package quite easily, even though there so many choices.

60-Day Iron Clad Money-back Guarantee

In general, this product is and people who purchase it will be backed by a 60-day guarantee, so if this woodworking package fails to meet them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a marginally long period to down because of its large size. Yet, using a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects in Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nevertheless, they didn’t mind being overrun considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking package is so thorough and vast that it contains just about every woodworking project a woodworker may be interested in building.

This woodworking package created by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking bundles that are available throughout the net. Ted has done his very best to guide them in every possible way he could, through easy to comprehend textual instructions, clear pictures and even movies as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking jobs they will find within. So, it is certainly worth buying!

The Benefits of Woodworking Free Carpentry Classes

Woodworking is 1 hobby that can also be a rewarding profession if you love to work with your hands and construct exquisite pieces of furniture from wood. When you learn the woodworking crafts and become a nice woodworking craftsman, you’ll have the ability to construct all kinds of furniture, (table, beds, and chairs), effortlessly. After that you can sell your finished woodworking jobs and make a handsome profit. Free Carpentry Classes.

It requires time to become skilled in the craft of woodworking. The nice thing about working up to that expert craftsman level is you’ll have the ability to create some really wonderful furniture to you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit in your living space. It’ll be a subject of conversation whenever you have friends come over to visit. They’ll ask: How can you make it? How long can it take to complete the job? What type of wood did you use? What type of tools did you use? Just how on earth did you create such a beautiful piece of furniture? As you speak about your work, a sense of pride will come over you and also do not be surprised if your friends ask you to make one for them too!

How to Become a Master Woodworker From Your Own Home Free Carpentry Classes

If you’re thinking you are too old or too young for woodworking, then think again! You’re never too old or too young for such a fun hobby and it’s ideal for beginners!

Where to begin in Woodworking? Free Carpentry Classes.

Start with a concept in mind of what you would like to construct then get a really good woodworking project plan that’s geared toward novices. There are several little woodworking projects for beginners available for sale from online woodworking merchants. A few woodworking program suggestions to get you thinking are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child simply to name a few. Of course, you can start out with as grand a woodworking program as you pick. However, the chances are if you begin using a small woodworking job initially, you’ll get a better prospect of keyword finishing the project.

Your woodworking project plan must incorporate some lists! Length of: woodworking equipment, the quantity and variety of wood required, and the required hand tools and power tools to finish the undertaking. Note: A word of warning about buying woodworking tools. Just buy what you want to finish your instant or upcoming endeavor. This is important especially if you are a beginner and just beginning. Tools are not affordable. The beginner needs good woodworking gear, but you can easily break the bank buying a great deal of tools you might not utilize all that frequently. When you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you can afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking clamps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and don’t overlook the wood glue and a brush to spread the wood glue! Obviously, you’ll require a dry place to work and may require a set of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more innovative hand tools and much more woodworking power tools here, but the concept is to purchase the crucial hand and power tools which novices will need. You can always increase your arsenal as you gain experience!

Free Carpentry Classes Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you have bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. However, if you’re unsure about what to do there is help available! There are several areas that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Each month the writers in woodworking magazines do a story about how best to improve your woodworking craft. When it is showing you the way you can apply an end to a finished project, or how to make a mortise and tenon joint, something new could be heard each month. Next, is purchasing instructional DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to work with a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Free Carpentry Classes

If you are a beginner and very interested in doing a DIY project for home afterward, woodworking can be interesting. If you do not have the right information, education, and ability, you might wind up spending more time and money than you originally meant to spend. As a beginner woodworker, you need to have time and the correct tools. Having mentioned, there are a couple of essential aspects you should keep in mind, before starting with any woodworking project.

1. If you’re just beginning, you should first have to be very interested in woodworking. Creating something new with your hands is a special sense. Don’t begin a project if you’re not interested, because this might land you in a bad location.

2. Consider the main reason for making this woodworking project. Decide on the uses of this thing you’re making.

3. Consider your abilities and analyze the time that you have, until you start with a project.

4. Start jobs that you’re able to complete. If you’re in the midst of a work, then it’s better to not begin any project at all.

The Benefits of Woodworking Free Carpentry Classes

If you keep these vital things in mind before beginning a woodworking project, it will become very simple for you to reach success. Woodwork requires planning as much as it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to choose the woodworking projects that you want to begin with. As a beginner, always pick a project that has a very basic build up or a very simple construction. A few easy to begin projects include, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you could always move to the next level of woodworking projects, like cupboards, sheds, and others. Beginning jobs should keyword be less complicated and less frustrating so you have a better comprehension of working with woods and their resources. When the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Free Carpentry Classes

Tools would be the ways whereby you will win the battle of woodworking. Many people think that power tools are needs. However, for beginners, basic hand tools can be very handy and more than useful in completing a job. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and dimensions. The workbench, when fixed with vises, offer ample space to work. As a key tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer can make matters considerably easy for you. When you buy a hammer, always check the balance between the weight and endure. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool can help you to cut forests at several sizes. There are different types of saws out there in the marketplace. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them will help you in advance woodworking. You might also buy keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you require a wrench. Nonetheless, this is not a tool for beginners, but having it would make work simpler for you in a subsequent stage.

7. Drill – Drill makes it possible to create holes in timber. Low wattage power drills will make the job much simple.

8. Other small and basic tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed cost on woodworking jobs. Dependent on the type of job you would like to complete, pricing can be determined. The easy the job, the less price it involves. But at the beginning buying the tools will be a little hefty. Because of this, it’s much better to fix a budget on the resources, then keyword on the undertaking. Purchasing the basic tools will ensure that you don’t have to purchase any more material aside from the wood ply.

Time and Instructions

Directions are among the principal things that each and every beginner should follow. Instructions manual is very simple to comprehend the procedure, what to do and the way to get it done. Time also has a significant part in the building of woodworking jobs. Woodworking projects demand time and so it is necessary for a beginner to have ample amount of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that would make the work easy. But the most essential thing keyword that can allow you to reach success is proper preparation. With appropriate planning and a strategy, it is likely to achieve success quickly. If you know the objective of woodworking, then the thing that you want to build, the resources you need to own and the typical time it’s possible to give every day; then you’re all set to go.

Conclusion, Free Carpentry Classes

These tips and education is likely to create the woodworking projects and strategies for beginners fast to complete. Always make sure you have all of the essential tools, materials, area ready. Read the instructions for constructing a product handy. Appropriate strategy and preparation will allow you to earn a fantastic woodworking job for your property.

|

Finding Woodworking Projects and Plans for Beginners Free Carpentry Classes

People if you’re looking for a way to pass time or desire an alternate way to make money they generally turn into a hobby that they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking at home there are lots of jobs one can think of. When starting out you have to be quite cautious when choosing which project to begin with because you will find jobs which may be too difficult for a newbie. But don’t be concerned about that because we are going to give you guidelines on the right way to start woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, so before you pick your job you need to know if you have the available tools to work on that project. Try not to spend a good deal of money on purchasing gear when starting out, buy more equipment as you get more experience and become a professional carpenter. If you enjoy your hobby then there will be no difference between the artistic hand and the hands.

Starting Your First Woodworking Shop Free Carpentry Classes

Woodworking at home will give you time to research different projects and find out so many things. That is why it’s very important to spend less money when starting out so that you can afford to make errors and at any time learning about different projects.
It is extremely important that you know about the different kinds of wood available for creating projects. Expect carpenters utilize different types of wood quality for decorating bits, learning which type of wood they use will allow you to prepare the wood you will need for certain jobs you might choose to pursue.
As soon as you know the basics of wood choice and the use of different tools you can now implement them in cutting out well wood pieces and placing wood together. Knowing what to do will assist you in building good projects to satisfy your wants.

Free Carpentry Classes practice makes perfect so be sure you practice your work every day if at all possible. Try out lots of layouts using various tools so that you can find the hang of working with the tools. When starting out you can make a range of errors but with time you will find out how to properly utilize them and produce quality projects.

|

How to Become a Master Woodworker From Your Own Home Free Carpentry Classes

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimal number of tools and equipment. A small home workshop can produce a broad variety of simple projects which can allow you to develop your creative and construction skills while rewarding you with artistic and practical wood products that you can enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let’s talk about where you’ll do your woodworking, Depending on the size of your home, you might be able to produce a dedicated space to your woodworking activities. This might be a reserved spot on your garage or on your basement. Sometimes, a detached shed or outbuilding may be perfect to prepare your first shop. A heated store detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement assignments will inevitably produce dust which travels into the living area of your house. This is very true in homes with forced air heating systems in which cold air returns found in the cellar draw up dust into the top levels of the house. Another benefit of detached workshops is, clearly, the noise level. You can work without bothering the rest of the family. A good compromise might be the garage of your property.

This might help minimize the difficulties of dust and noise, however based on where you reside, a keyword garage workshop may not be practical during extremes of hot or cold weather.

Finding Woodworking Projects and Plans for Beginners Free Carpentry Classes

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes that they add more space to work in. Free Carpentry Classes if you’re able to have a dedicated place for a workshop all the greater. Floor gear and bench top gear can stay in place from project to project. If this installation isn’t hopeless, at least try to create a bench area where equipment can be stored and pulled out as needed. If at all possible plan for inevitable expansion as you acquire more tools and equipment. In the start, set up a seat area where you are able to shop and use the majority of your gear, using a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. Add a sturdy shelf below the seat to house your hands power tools along with a pegboard above the seat to hang additional equipment. Install a woodworking at one end of your seat on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Free Carpentry Classes

The scope of your start-up equipment will be mostly based on your budget. Whether you have got large financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, purchase your quality tools at the regional building and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or alternative regional ads. You will find an abundance of quality lightly used programs out there that belong to people who embarked on that one molding project around the house or received tools as gifts which they won’t ever use. You can usually buy tools for all these sellers for less than half of the initial price and save even more money should you create a package deal for all their unused equipment. Obviously, getting tools from private individuals will require extra time and perhaps travel expenses. Weigh the benefits of traveling across town to save a couple extra bucks on a cheap piece of gear. The excess cost of time and travel in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or large finished tools like surface planers later on.
For smaller acquisitions, a trip to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimal quantity of hand equipment yet produced sophisticated and intricate bits. Focus on developing your abilities with your startup set of tools and avoid lamenting about the equipment you wished you had.
Here is a checklist of the more useful tools You Will Need to get started:
Safety Gear: Start as expected with eye protection. Get a decent pair of safety glasses that also offer some side protection for your eyes. Buy a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually hamper your vision and affect security. Avoid wearing gloves at a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together if you find them uneasy.

The next bit of critical safety equipment that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking may be noisy and long-term exposure to those noise levels can affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. I am keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often known as a skill saw after the popular brand name, this can prove to be the most flexible tool in a startup workshop. In fact, at the hands of a professional, a power hand saw could be used to build an entire property. As mentioned before get a quality manufacturer saw. Stay away from cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your next job. After choosing the right saw install an excellent blade. Most saws come with a starter blade of lesser quality even if they are a good saw. Keep this blade as a backup and install a quality blade with carbide teeth. Begin with a hybrid . All these have a balanced tooth count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool cannot only cut curves. It’s perfect for cutting holes in timber also like handle slots. Eventually, you’re going to want to obtain a ring saw. Bandsaws are much more flexible but a excellent floor unit could be expensive. A jigsaw may be a fantastic stop gap for the novice woodworker.

Buy an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the conventional 3/8 inch model. Down the road, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have found that buying quality, in this scenario, is more critical than ever. Cheaper drills have a tendency to get very short run times and have to be recharged frequently. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slip frequently. This is one annoyance you do not want on your workshop. Purchase an range of quality carbide tipped drill bits which are stored in a holder labeling each drill bit size. Make a habit of returning each drill piece to its prospective slot at the holder after each use. Lastly, get a pair of tough steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most flexible instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop injuries happen. Although the most ordinary, hammer injuries are often of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The good hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high tech range offer ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Pick a title brand quality hammer in the 16-ounce range for general work and also a smaller finishing hammer for more intricate work. Avoid using big framing hammers in the workshop and some other with dimpled mind tips. These types of hammers are more appropriate to rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage pretty much any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you will probably update to a floor model disc and belt sander. But for the time being, the ever-versatile palm sander may clean up edges, cross cuts and even limited quantities of surface area. As you embark on your first few projects you’ll discover that your palm sander using just a bit of effort can change rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and form rough boards with 100 grit paper and later finish your job with 200 or even 300 grit paper. Buy an range of sandpaper sheets using an extra source of 100 grit paper. You’ll get that this caliber of paper the most versatile in your shop.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Although low tech in concept, these tools allow you to taper borders, sew high stains and fix any imperfections in timber pieces. {Begin with a typical amount 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it normally requires the novice woodworker a few years to collect a detailed set of timber clamps. Start with a pair of extended”pipe” clamps. Now the pipe was replaced with long steel shafts, but the structure is still the same. Get a set of the longest clamps which you could afford. You can contact them for smaller adhesive jobs and enlarge them to their full length for larger projects.

Shop Vice: A shop vice installed at the end of the seat is perfect for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices with their wood clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the greater vices offer rapid release mechanisms that enabled the consumer to rapidly open and close the limbs with no dull handle rotation. The wood clamping surfaces on your vice will occasionally require replacement. I would rather utilize soft walnut in my vices that will not crush or damage lots of the various forests that I utilize. Whether I am working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be among your most often used tools. Buy a fantastic excellent name brand tape measure with a broad tape usually from the 25-foot range. Even though in your store you might not use the tape in these lengths, the bigger tape measures provide more rigid tapes that won’t flop around and slide off the ending of planks. Measuring when you’re by yourself will be a great deal easier, and of course, quality tape measures can last for many decades.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the timber.

What is Woodworking? How to Become a Master Woodworker From Your Own Home Free Carpentry Classes

Woodworking is referred to as the construction or the creation of objects from wood. It is possible to produce a lot of unique items from woodworking and these items are often as large as gazebos or as small as wooden toys. No matter how big or small your private project maybe you’ll be quite likely to accomplish that goal with woodworking. In addition, woodworking has lots of private as well as emotional benefits! In this article, I will briefly identify some of these benefits for youpersonally.

Woodworking as a Career:

People who build things out of wood are generally known keyword as carpenters. Carpenters can operate on a number of woodworking jobs and job types. For example, some carpenters possess their carpentry company and these individuals have the luxury to set their job hours. This benefit enables carpenters the chance to spend more time with their families and also have less job strain. Raising kids is a very difficult task no matter what way you approach the task! To get a carpenter who owns his or her own company, this task may not be hard since that person will have more time to be a part of her or his child’s life. By playing a larger role in the life span of your child you will be having a larger influence on the type of character that kid develops into, which is a massive concern for any loving parent. Besides such advantages, carpentry may also have health benefits too.

How to Become a Master Woodworker From Your Own Home Free Carpentry Classes

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood around a lot. This causes more physical activity, which leads to better physical health. Keeping your body physically healthy is vital and keyword can help prevent the occurrence of various illnesses later on in life. By being physically healthy you can decrease chances that you will have a heart attack, have seizures, turned into a diabetic, and lower the chances of having a range of different disorders.

Free Carpentry Classes, Do It Yourself Woodworking Saves Money:

I always feel like I paid way too much when I visit home improvement stores and buy patio furniture, and I am certain that I am not the only person who has felt this way! A successful business owner once advised me to constantly raise the sales price of a commodity to double what you’ve got it for. This way, you always have the option to reduce the merchandise to 50 percent away and still come out without acquiring any losses. This sounds like it might be exactly the exact same tactic that home improvement shops use in selling their own wooden furniture solutions. Regardless, there’s a way that it is possible to get around paying the extra cash and that’s to do with building it yourself. Fortunately, there are several really good woodworking products that offer thousands of detailed woodworking keyword strategies for hundreds of different job types. Thus, you can really build whatever you need or see in any home improvement store. Doing something does require a little bit of time but time is well spent when you wind up saving hundreds of dollars because of your hard work.

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Carpentry

Carpentry is a skilled trade and a craft in which the primary work performed is the cutting, shaping and installation of building materials during the construction of buildings, ships, timber bridges, concrete formwork, etc. Carpenters traditionally worked with natural wood and did the rougher work such as framing, but today many other materials are also used[1] and sometimes the finer trades of cabinetmaking and furniture building are considered carpentry. In the United States, 98.5% of carpenters are male, and it was the fourth most male-dominated occupation in the country in 1999. In 2006 in the United States, there were about 1.5 million carpentry positions. Carpenters are usually the first tradesmen on a job and the last to leave.[2] Carpenters normally framed post-and-beam buildings until the end of the 19th century; now this old fashioned carpentry is called timber framing. Carpenters learn this trade by being employed through an apprenticeship training—normally 4 years—and qualify by successfully completing that country's competence test in places such as the United Kingdom, the United States, Canada, Australia and South Africa.[3] It is also common that the skill can be learned by gaining work experience other than a formal training program, which may be the case in many places.

The word "carpenter" is the English rendering of the Old French word carpentier (later, charpentier) which is derived from the Latin carpentarius [artifex], "(maker) of a carriage.[4] The Middle English and Scots word (in the sense of "builder") was wright (from the Old English wryhta, cognate with work), which could be used in compound forms such as wheelwright or boatwright.[5]

In the UK, carpentry is more correctly used to describe the skill involved in first fixing of timber items, such as construction of roofs, floors and timber framed buildings, i.e., those areas of construction that are normally hidden in a finished building. An easy way to envisage this is that first fix work is all that is done before plastering takes place. Second fix is done after plastering takes place. Second fix work, the construction of items such as skirting boards, architraves, and doors also comes under carpentry. Carpentry is also used to construct the formwork into which concrete is poured during the building of structures such as roads and highway overpasses. In the UK, the skill of making timber formwork for poured, or in situ, concrete, is referred to as shuttering.

Video: Woodworking Tools