Free Carpentry Courses | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those attributes along with a few petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, himself is also an instructor and a part of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking when they’re following because all the thoughts and projects Ted’s resource are simple to understand and simple. Ted McGrath spent two years researching so that he could collect enough material for a comprehensive package, and he ended up creating a truly’complete’ woodworking source.

Many might still appear unsure whether they need to be buying Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it even more difficult to make the ideal option. There are in fact many things that set Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. Those that are just getting started will find the thoughts and jobs in Ted’s package quite easy. Without doubt, complicated carpentry is involved; nonetheless, they will find it really easy to follow Ted’s easy step by step directions. Presently, both beginner and experienced ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who purchase his package, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a lot about woodworking. They will also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers are going to be able to locate any project of their choice within this bundle quite readily, even though there numerous options.

60-Day Iron Clad Money Back Guarantee

In general, this product is and those who buy it’ll be endorsed by a 60-day guarantee, so when this woodworking package fails to satisfy them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large size. Yet, using a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nevertheless, they didn’t mind being overwhelmed considering how this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so thorough and vast that it contains just about every woodworking project a woodworker might be considering building.

This woodworking package created by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking packages that are available across the internet. Ted has done his very best to direct them in every conceivable way he could, through simple to comprehend textual directions, clear pictures and even videos too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking projects they will find within. Therefore, it is definitely worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Free Carpentry Courses

Woodworking is one hobby that can also be a rewarding profession if you like to work with your hands and construct exquisite pieces of furniture from timber. When you learn the woodworking crafts and become a fine woodworking craftsman, you will be able to build all kinds of furniture, (beds, table, and chairs), with ease. After that you can sell your finished woodworking projects and make a handsome profit. Free Carpentry Courses.

It takes time to become proficient in the craft of woodworking. The wonderful thing about working up to this expert craftsman level is you’ll be able to build some really nice furniture for you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit on your living space. It will be a topic of conversation when you have friends come over to visit. They will ask: How can you create it? Just how long did it take to complete the project? What kind of wood did you use? What kind of tools did you use? Just how on earth did you create such a gorgeous piece of furniture? As you speak about your work, a feeling of pride will encounter you and do not be surprised if your friends ask you to create one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Free Carpentry Courses

If you are thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such a fun hobby and it is perfect for beginners!

Where to Begin in Woodworking? Free Carpentry Courses.

Begin with a concept in mind of what you would like to construct then get a really good woodworking project plan that’s geared toward novices. There are numerous little woodworking projects for novices available for sale from online woodworking merchants. A few woodworking program suggestions to get you thinking really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child just to mention a couple. Of course, you can start out with as grand a woodworking plan as you choose. On the other hand, the chances are if you start out using a small woodworking job at first, you will have a better prospect of keyword completing the job.

Your woodworking project plan must incorporate some lists! Lists of: woodworking equipment, the quantity and variety of wood required, and the required hand tools and power tools to finish the undertaking. Note: A word of caution about purchasing woodworking tools. Just buy what you want to finish your instant or upcoming project. This is important especially if you are a beginner and just starting out. Tools aren’t affordable. The newcomer needs good woodworking gear, but it is simple to break the bank purchasing a lot of tools you might not use all that often. When you do buy gear, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, flat and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not overlook the wood glue and a brush to spread the wood glue! Of course, you’ll need a dry area to work and may need a set of horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more innovative hand tools and much more woodworking power tools , but the idea is to buy the essential hand and power tools which novices will need. You can always increase your arsenal as you gain experience!

Free Carpentry Courses Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you have bought your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan should provide you step by step directions and techniques to complete your project. However, if you’re not certain about what to do there is help available! There are lots of areas that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Every month the authors in woodworking magazines do a story on how best to increase your woodworking craft. When it is showing you how you can apply a finish to a completed job, or how to create a mortise and tenon joint, something new could be learned each month. Next, is purchasing instructional DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to work with a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Free Carpentry Courses

If you are a beginner and very interested in doing a DIY project for home afterward, woodworking can be fun. If you don’t have the right information, education, and skill, you may land up spending more money and time than you initially meant to spend. As a novice woodworker, you want to have space, time and the correct tools. Having said, there are a few essential factors you should keep in mind, before starting with any woodworking project.

1. If you’re a beginner, you should first have to be very interested in woodworking. Creating something new with your own hands is a special sense. Don’t start a job if you are not interested, because this might land you at a bad place.

2. Think of the primary reason behind creating this woodworking project. Decide on the uses of this thing you’re making.

3. Consider your skills and analyze the time you have, until you start with a job.

4. Start jobs that you can finish. If you’re in the middle of some work, then it is wise not to start any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Free Carpentry Courses

If you keep these essential points in mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much because it requires effort. So how can you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to choose the woodworking projects that you want to start with. As a newcomer, always pick a project that has quite a basic build up or a simple structure. Some easy to begin projects include, bird feeder, chairs, shelves, etc.. The moment you get hold of these techniques, you could always proceed into the next level of woodworking projects, like cabinets, sheds, along with others. Beginning projects should always keyword be complicated and less frustrating so that you have a better knowledge of working with forests and their resources. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Free Carpentry Courses

Tools would be the means through which you can win the battle of woodworking. A lot of people think that power tools are requires. However, for beginners, basic hand tools can be very convenient and more than useful in completing a job. If woodworking is your hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for precise cuts and dimensions. The workbench, when fixed with vises, offer ample space to work. As a key tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make matters considerably simple for you. When you buy a hammer, constantly assess the equilibrium between the weight and stand. Always select a sturdy, yet lightweight product.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool helps you to cut forests at several sizes. There are different types of saws available in the marketplace. Decide on a size which you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Having all of them will help you ahead of time woodworking. You might even buy keyword power screwdrivers since they make the job much quicker.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you require a wrench. Nonetheless, this is not a tool for beginners, but having it might make work easier for you at a later stage.

7. Drill – Drill helps you create holes in wood. Low wattage power drills can make the job much easy.

8. Additional small and fundamental tools – These include pens, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is no fixed price on woodworking projects. Dependent on the type of project that you would like to finish, pricing can be determined. The easy the job, the less cost it involves. But at the beginning purchasing the tools will be somewhat hefty. Therefore, it’s much better to resolve a budget first on the resources, then keyword on the undertaking. Purchasing the basic tools will make certain you don’t need to purchase any more material aside from the wood ply.

Time and Instructions

Instructions are among the principal things which each and every beginner should follow. It’s like the woodworking Bible. Instructions manual is very easy to understand the process, what to do and the way to do it. Time also plays an important role in the construction of woodworking jobs. Woodworking projects require time and so it’s crucial for a novice to have ample amount of time every week.

Tips and Tricks for Beginners

There are no quick tips or suggestions that would make the work easy. Nevertheless, the most indispensable thing keyword that can allow you to reach success is proper planning. With appropriate planning and a plan, it is possible to achieve success immediately. If you know the purpose of woodworking, then the item you want to build, the tools you need to own and the average time you can devote every day; then you’re ready to go.

Conclusion, Free Carpentry Courses

All these tips and instruction is likely to make the woodworking projects and plans for novices fast to complete. Always make sure that you have all of the vital tools, materials, area prepared. Read the instructions for building an item handy. Appropriate strategy and preparation can help you to earn a great woodworking job for your home.

|

Finding Woodworking Projects and Plans for Beginners Free Carpentry Courses

Folks when looking for a way to pass time or desire an alternative way to make money they generally turn into a hobby they enjoy. Woodworking is one of the hobbies individuals turn to perform as a hobby or home based company. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are lots of projects one can consider. When starting out you have to be quite careful when choosing which project to begin with since there are jobs that can be too difficult for a newbie. But don’t worry about that because we will provide you guidelines on the ideal means to begin woodworking as a newcomer.

The same as any other hobby woodworking requires some working equipment, therefore before you choose your job you need to be aware of whether you have the available tools to work on that project. Try not to spend a good deal of money on buying equipment when starting out, buy more equipment as you gain more experience and become an expert carpenter. If you enjoy your hobby then there’ll not be any difference between the hand and the hands.

How to Become a Master Woodworker From Your Own Home Free Carpentry Courses

Woodworking in your home will provide you time to explore unique jobs and find out so many things. That’s why it’s very important to invest less money when starting out so you can manage to make errors and at some time learning about various jobs.
It is very important you know about different kinds of wood available for making jobs. Expect carpenters use several kinds of wood quality for decorating bits, learning which kind of wood they use will allow you to prepare the wood you will need for specific projects you may choose to pursue.
Once you understand the fundamentals of wood selection and the usage of different tools now you can employ them in cutting out well wood pieces and placing wood together. Knowing what to do can assist you in building good projects to satisfy your needs.

Free Carpentry Courses practice makes perfect so make sure that you practice your work daily if at all possible. Try out lots of designs using a variety of tools so that you can find the hang of working with the tools. When starting out you may earn a number of errors but with time you will find out how to correctly use them and create quality projects.

|

The Benefits of Woodworking Free Carpentry Courses

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimum amount of gear and equipment. A small home workshop can generate a broad array of simple projects which can allow you to develop your creative and construction skills while rewarding you with artistic and practical wood products which you are able to enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let’s discuss where you’ll do your woodworking, based on the dimensions of your home, you might be able to produce a dedicated space to your woodworking activities. This may be a reserved place in your garage or in your basement. In some cases, a detached shed or outbuilding might be ideal to prepare your first store. A heated shop detached from your home offers one distinct advantage: better pest management. Without sophisticated dust control methods, basement workshops will inevitably produce dust that travels to the living area of your home. This is particularly true in homes with forced air heating systems in which cold air yields found in the cellar draw up dust into the top levels of the home. Another advantage of detached workshops is, of course, the sound level. It’s possible to work without disturbing the rest of the household. A fantastic compromise could be the garage of your home.

This can help minimize the difficulties of dust and noise, however depending on where you reside, a keyword garage layout might not be sensible during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Free Carpentry Courses

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes that they include more space to function in. Free Carpentry Courses if you can have a dedicated place for a marathon all the better. Floor gear and bench top equipment can stay in position from project to project. If this setup isn’t hopeless, at least try to create a bench area where equipment can be stored and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and equipment. At the beginning, establish a seat area where you are able to shop and use the majority of your gear, using a temporary expansion of your activities onto the basement or garage floor.

A basic workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. This will let you work comfortably while standing. Insert a sturdy shelf beneath the seat to house your hands power tools and a pegboard above the seat to hang other gear. Put in a woodworking vice at one end of your bench on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Free Carpentry Courses

The reach of your startup equipment will be largely based on your budget. Whether you have got big financial resources or you’re starting on a shoestring always buy quality gear. If you can afford it, buy your quality tools in your local building and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or other local advertisements. There are plenty of quality gently used tools out there which belong to people who embarked on that one molding project around the house or received tools as gifts that they will never utilize. You can usually buy tools for all these sellers for under half the initial cost and save even more money if you make a package deal for all their unused equipment. Of course, acquiring tools from private individuals will take extra time and possibly travel expenses. Weigh the benefits of traveling across town to save a few added dollars on a inexpensive piece of gear. The excess expense of time and travel in these situations is usually justified when purchasing large ticket items like table saws, bandsaws or large ended tools such as surface planers later on.
For smaller acquisitions, a trip to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal amount of hand gear yet generated sophisticated and complex pieces. Focus on developing your abilities with your startup set of resources and avoid lamenting about the gear you wished you’d.
Here is a checklist of the more useful tools You Will Need to get started:
Safety Gear: Start as anticipated with eye protection. Get a nice pair of safety glasses which also offer some side protection for your eyes. Purchase a quality oil collection that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually impair your vision and influence safety. Avoid wearing gloves at a workshop. Most impair eyesight and dust up fast. You can avoid wearing all of them together if you find them uncomfortable.

The next piece of crucial safety gear you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking can be noisy and long-term exposure to those noise levels can affect hearing and result in tinnitus and other hearing losses. With this set up I am shielding my eyes and my ears. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Often referred to as a skill saw following the popular name, this can prove to be the most versatile instrument in a start-up workshop. In reality, at the hands of a professional, a power hand saw can be used to construct an whole house. As mentioned earlier get a quality manufacturer saw. Stay away from cheap unknown brands. These tend to cut back and will burn out before you start your next job. After choosing the proper saw put in an excellent blade. Most saws include a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade for a backup and put in an excellent blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will add great versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool cannot only cut curves. It’s ideal for cutting holes in wood also like handle slots. Eventually, you’re going to want to get a band saw. Bandsaws are even more versatile but a excellent floor unit could be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Purchase an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss within the standard 3/8 inch version. Through hard lessons learned, I have found that buying quality, in this scenario, is more critical than ever. Cheaper drills tend to get very short run times and need to be recharged frequently. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slip frequently. This is one annoyance you do not need on your workshop. Purchase an range of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Make a habit of returning every drill bit to its potential slot in the holder after each use. Lastly, get a pair of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer stays as the most flexible tool in the shop, and often the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop injuries occur. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, does not rust and features a comfortable grip. Most hammers in the high tech range offer ceramic or metal handles. Cheaper hammers usually have wood grips with inferior joints between the handle and head. The head typically comes loose and the instrument becomes useless. Pick a name brand quality hammer at the 16-ounce scope for general work and a smaller finishing hammer for more intricate work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These types of hammers are more appropriate for rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can manage pretty much any trimming requirements that you’ve got as a novice woodworker. As your woodworking skills evolve, you’ll likely upgrade to a floor version disc and belt sander. But for the time being, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited quantities of surface area. As you embark on the first few projects you’ll discover that your palm sander using just a bit of effort can change rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and shape rough planks using 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an range of sandpaper sheets with an excess source of 100 grit paper. You’ll get that this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Although low tech in concept, these tools enable you to taper borders, sew high stains and fix any imperfections in timber bits. {Start with a standard amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold down your wood bits as you operate on them. Unfortunately, good clamps are expensive and it normally takes the novice woodworker a couple of years to accumulate a comprehensive set of timber clamps. Start with a set of extended”pipe” clamps. Today the pipe was replaced with long steel shafts, however, the structure remains the same. Receive a set of the longest clamps that you can afford. You can contact them for smaller adhesive jobs and enlarge them to their full length for bigger jobs.

Shop Vice: A store vice installed in the end of your seat is perfect for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer rapid release mechanisms that enabled the user to quickly open and close the limbs with no dull handle turning. The wood beamed surfaces in your vice will occasionally require replacement. I prefer to use soft walnut in my vices that won’t crush or damage lots of the different woods that I utilize. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among the most frequently used tools. Purchase a fantastic excellent name brand tape measure with a broad tape typically from the 25-foot selection. Although in your store you might not be using the tape in these lengths, the bigger tape measures offer more rigid tapes that won’t flop around and slide off the end of boards. Assessing when you’re by yourself will be a great deal simpler, and naturally, quality tape measures can endure for many decades.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood.

What is Woodworking? Woodwork Crafts – The Beginners Guide To Woodworking Free Carpentry Courses

Woodworking is referred to as the building or the production of items out of wood. You can create a great deal of different items from woodworking and these items are often as big as gazebos or as little as wooden toys. No matter how big or small your private project maybe you’ll be quite likely to accomplish that aim with woodworking. In addition, woodworking has many private as well as psychological benefits! In this guide, I will briefly identify some of these benefits for youpersonally.

Woodworking as a Career:

People who build things out of wood are usually known keyword as carpenters. Carpenters can work on a number of woodworking jobs and occupation types. For instance, some carpenters own their carpentry business and these folks have the luxury to set their job hours. This benefit allows carpenters the chance to spend additional time with their own families and have less job strain. Raising kids is a really difficult task no matter what way you approach the task! To get a carpenter who owns their own company, this job may not be hard because that person will have more time to become a part of her or his child’s lifetime. By playing a larger part in the life of your child you will be having a greater influence on the type of personality that child develops into, which is a huge concern for any loving parent. Besides such advantages, carpentry can also have health benefits too.

Starting Your First Woodworking Shop Free Carpentry Courses

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood around a whole lot. This causes more physical activity, which leads to better physical health. Maintaining your body physically fit is vital and keyword can assist in preventing the occurrence of various illnesses later on in life. By being physically fit you can decrease chances you will have a heart attack, have seizures, become a diabetic, and lower the odds of having a range of other disorders.

Free Carpentry Courses, Do It Yourself Woodworking Saves Cash:

I always feel as I paid way too far when I visit home improvement stores and buy patio furniture, and I am sure that I’m not the only person that has felt like this! A successful business owner once advised me to always increase the sales price of a commodity to double everything you’ve obtained it for. In this manner, you always have the option to reduce the merchandise to 50 percent off and still come out without getting any losses. This sounds like it may be exactly the same strategy that home improvement stores use in selling their own wooden furniture solutions. Regardless, there is a way that it is possible to get around paying the additional money and that has to do with building it yourself. Fortunately, there are some really excellent woodworking products that offer thousands of detailed woodworking keyword strategies for hundreds of different job types. So, you can really build anything you want or see in any home improvement store. Doing something does require a little bit of time but the time is well spent when you end up saving hundreds of dollars because of your hard work.

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Analytical skill

Analytical skill is the skill of performing an analysis. Such skills include the ability to apply logical thinking in order to break complex problems into their component parts. This can be contrasted against non-cognitive skills, such as balancing while walking, riding a bike, carpentry, or playing a musical instrument.

In the article by Freed,[1] the need for programs within the educational system to help students develop these skills is demonstrated. "According to scholars, workers 'will need more than elementary basic skills to maintain the standard of living of their parents. They will have to think for a living, analyze problems and solutions, and work cooperatively in teams' (Thoughtful Teachers, Thoughtful Schools 1998, xi)."[2] [3][4]

Video: Woodworking Projects