Free Diy Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and some of those qualities along with a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an educator and a member of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking whenever they are after because most of the thoughts and jobs Ted’s source are easy to understand and simple. Ted McGrath spent two years researching so that he could gather enough material for an extensive package, and he ended up creating a really’complete’ woodworking source.

Many may still seem unsure whether they need to be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more challenging to make the right option. There are in fact lots of things that place Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit out of Ted’s woodworking Package. People who are just getting started will find the ideas and jobs in Ted’s bundle quite simple. Without doubt, complicated carpentry is involved; nonetheless, they will discover that it’s really simple to follow Ted’s simple step-by-step directions. Currently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his package, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which will help beginners learn a lot about woodworking. They’ll also be able to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will have the ability to locate any job of their choice within this bundle quite readily, even though there numerous options.

60-Day Iron Clad Money Back Guarantee

In general, this item is and people who purchase it will be endorsed by a 60-day warranty, so if this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long period to down because of its large dimensions. Nonetheless, with a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans in Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nonetheless, they did not mind being overwhelmed considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design bundle is so comprehensive and vast it contains just about every woodworking project a woodworker may be interested in constructing.

This woodworking bundle made by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking packages that are available across the internet. Ted has done his best to direct them in every possible way he could, through simple to understand textual directions, clear images and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking projects they will find inside. Therefore, it’s certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more innovative hand tools and much more woodworking power tools here, but the idea is to buy the crucial hand and power tools that novices will need. You can always add to your toolbox as you get experience!

Free Diy Woodworking Plans Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you’ve purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. However, if you are unsure about what to do there is help available! There are several areas that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Each month the authors in woodworking publications do a story about the best way best to improve your woodworking craft. Whether it’s showing you how to apply a finish to a finished project, or how to make a mortise and tenon joint, something new could be learned each month. Next, is purchasing instructional DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Free Diy Woodworking Plans

If you’re a beginner and very interested in doing a DIY project for house afterward, woodworking can be interesting. If you don’t have the right information, instruction, and skill, you might land up spending more money and time than you originally meant to spend. As a beginner woodworker, you want to have space, time and the appropriate tools. Having mentioned, there are a couple of essential factors you should remember, before starting with any woodworking project.

1. If you’re a beginner, you should first have to be very interested in woodworking. Creating something new with your hands is a particular sense. Do not start a job if you are not interested, because this might land you at a bad place.

2. Think of the primary reason behind creating this woodworking project. Decide on the uses of the item you are making.

3. Consider your abilities and examine the time that you have, before you begin with a job.

4. Start jobs which you’re able to finish. If you are in the midst of some work, then it’s better to not begin any project at all.

How to Become a Master Woodworker From Your Own Home Free Diy Woodworking Plans

If you maintain these essential points in your mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires planning as much as it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking projects that you want to start with. As a beginner, always pick a job that has a very basic build up or a simple structure. A few easy to begin projects include, bird feeder, benches, shelves, etc.. As soon as you get hold of the techniques, you can always move to the next level of woodworking projects, such as cupboards, sheds, along with others. Beginning jobs should always keyword be complicated and less frustrating so you have a better comprehension of working with woods and their resources. When the job is selected, start selecting your tools.

Beginners Woodworking Tools, Free Diy Woodworking Plans

Tools would be the ways through which you can win the struggle of woodworking. A lot of men and women think that power tools are needs. But for novices, basic hand tools can be very handy and more than helpful in completing a job. If woodworking is your hobby, then some tools that you would require are:

1. Workbench – A workbench is required for precise cuts and measurements. Even the workbench, when mended with vises, provide ample space to operate. As a primary tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer will make matters considerably easy for you. When you buy a hammer, constantly check the balance between the weight and endure. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool helps you to cut woods at different sizes. There are various sorts of saws out there on the marketplace. Decide on a size that you could handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Possessing all of them can help you ahead of time woodworking. You can even buy keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape gives you the capacity to quantify wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you require a wrench. However, this isn’t a tool for beginners, but using it might make work easier for you at a subsequent stage.

7. Drill – Drill makes it possible to create holes in wood. Low wattage power drills can make the job much simple.

8. Other small and basic tools – These include pens, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s not any fixed cost on woodworking jobs. Based on the type of project that you want to complete, pricing could be determined. The simple the project, the less cost it involves. But at the very beginning buying the tools will be somewhat hefty. Because of this, it’s better to fix a budget on the tools, then keyword on the project. Buying the fundamental tools will ensure that you don’t have to purchase any more material other than the wood ply.

Time and Directions

Directions are among the principal things which each and every beginner should follow. Instructions manual is quite easy to comprehend the process, what to do and how to get it done. It keyword is a systematic manual for finishing the project. Time also plays a significant role in the building of woodworking projects. Woodworking projects require time and therefore it is crucial for a novice to have ample quantity of time weekly.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most essential thing keyword that can allow you to reach success is proper planning. With appropriate planning and a strategy, it’s likely to achieve success quickly. If you understand the purpose of woodworking, the item that you want to build, the tools you require in order to possess and the average time you can give every day; then you are ready to go.

Conclusion, Free Diy Woodworking Plans

All these strategies and instruction will make the woodworking projects and strategies for beginners fast to complete. Always make sure you have all the essential tools, materials, space ready. Keep the instructions for constructing an item handy. Appropriate strategy and preparation can help you to earn a great woodworking project for your property.

|

Finding Woodworking Projects and Plans for Beginners Free Diy Woodworking Plans

People if you’re trying to find a way to pass time or desire an alternative way to make money they generally turn to a hobby that they enjoy. Woodworking is one of the hobbies individuals turn to perform as a hobby or home based company. It’s very exciting to do and everyone can begin.

When doing woodworking at home there are a lot of projects one can consider. When starting out you have to be very cautious when choosing which project to begin with since you will find jobs which may be too difficult for a newbie. But do not be concerned about that since we will provide you guidelines on the right way to start woodworking as a beginner.

Just like any other hobby woodworking demands some working equipment, so before you pick your job you have to be aware of if you’ve got the available tools to work on such a job. Try not to invest a lot of cash on purchasing gear when starting out, buy more equipment as you get more experience and become a professional carpenter. Should you enjoy your hobby then there will not be any gap between the artistic hand and the normal hands.

Finding Woodworking Projects and Plans for Beginners Free Diy Woodworking Plans

To keep yourself updated you have to disseminate with different brands tools and woods. Woodworking at home will give you time to research different projects and find out a lot of things. That’s why it’s very important to invest less money when starting out so you can manage to make mistakes and at any time learning about various projects.
It is very important that you know about the different kinds of wood available for creating jobs. Expect carpenters use several types of wood quality for decorating pieces, learning what type of wood they use will help you prepare the wood you’ll need for certain projects you might choose to pursue.
As soon as you understand the basics of wood selection and the usage of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do will help you in building good jobs to satisfy your needs.

Free Diy Woodworking Plans practice makes perfect so make sure you practice your work daily if possible. Try out a lot of designs utilizing a variety of tools so you may get the hang of working with the tools. When starting out you can make a number of mistakes but with time you will find out how to properly use them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Free Diy Woodworking Plans

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever enjoy. You can get started on a shoestring with a minimum number of tools and equipment. A small home workshop may produce a wide array of simple projects which will allow you to develop your creative and construction abilities while rewarding you with practical and artistic wood products which you are able to enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let’s talk about where you will perform your woodworking, based on the dimensions of your home, you might be able to create a dedicated space to your woodworking tasks. This might be a reserved place in your garage or on your basement. Sometimes, a detached shed or outbuilding might be ideal to prepare your first store. A heated store detached from your home provides one distinct advantage: better pest management. Without complex dust control methods, basement assignments will inevitably create dust which travels into the living area of your home. This is very true in homes with forced air heating systems where cold air yields located in the cellar draw dust up into the top levels of the house. Another benefit of detached workshops is, clearly, the noise level. It’s possible to work without disturbing the remainder of the household. A fantastic compromise could be the garage of your property.

This might help minimize the difficulties of dust and noise, however based on where you reside, a keyword garage workshop may not be practical during extremes of hot or cold weather.

Starting Your First Woodworking Shop Free Diy Woodworking Plans

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes that they add more space to function in. Free Diy Woodworking Plans if you’re able to have a dedicated place for a workshop all the better. Floor gear and bench top gear can stay in position from project to project. If this installation isn’t impossible, at least try to make a chair area where equipment could be saved and pulled out as needed. If at all possible plan for inevitable growth as you get more tools and equipment. In the beginning, set up a bench area where you can shop and use most of your equipment, with a temporary expansion of your actions onto the garage or basement floor.

A basic workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. That will let you work comfortably while standing. Insert a sturdy shelf beneath the bench to house your hand power tools along with a pegboard above the seat to hang additional gear. Install a woodworking vice at one end of your bench on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Free Diy Woodworking Plans

The scope of your startup equipment will be largely based on your financial plan. Whether you have got large financial resources or you are starting on a shoestring consistently buy quality gear. If you can afford it, buy your quality tools in the local building and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative regional advertisements. There are plenty of quality lightly used programs out there that belong to individuals who stumbled on that 1 molding job around the house or received tools as presents that they will never utilize. You can usually buy tools for these sellers for under half of the original cost and save even more money should you make a bundle deal for all their unused equipment. Of course, acquiring tools from private people will take additional time and perhaps travel expenditures. Weigh out the advantages of traveling across town to save a couple extra dollars on a inexpensive piece of equipment. The excess expense of travel and time in these scenarios is usually justified when buying large ticket items such as table saws, bandsaws or large ended tools such as surface planers in the future.
For smaller acquisitions, a trip to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimal amount of hand gear yet generated sophisticated and intricate pieces. Concentrate on developing your abilities with your start-up set of tools and prevent lamenting about the gear you wished you’d.
Here is a checklist of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected by eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually hamper your vision and affect safety. Avoid wearing goggles in a workshop. Most impair vision and dust up fast. You can avoid wearing them all together if you find them uneasy.

The next piece of crucial safety equipment you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking may be long-term and noisy exposure to these sound levels can affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats fatigue.

Most employees tire quicker when exposed to elevated sound levels. These may include earplugs or complete ear keyword muff protectors. I find that a quality set of ear muff protectors is perfect for hearing protection.

Lastly, wear a cap to keep the dust from your hair. I prefer a simple ball cap along with my ear muffs and eye protection. I’m keeping the dust out of my hair. I am good to go!

Power Hand Saw: Frequently known as a skill saw following the popular name, this can prove to be the most flexible instrument in a start-up workshop. In fact, in the hands of a professional, a power hand saw can be used to build an entire property. As mentioned before get an excellent manufacturer saw. Stay away from cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you start your second job. After selecting the proper saw install an excellent blade. Most skill saws come with a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade for a backup and put in an excellent blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument can’t just cut corners. It’s ideal for cutting holes in timber too like handle slots. Eventually, you’ll want to get a band saw. Bandsaws are much more flexible but a excellent floor unit can be costly. A jigsaw can be a good stop gap for the novice woodworker.

Buy an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the standard 3/8 inch model. Through hard lessons learned, I have found that purchasing quality, in this case, is more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged frequently. Their long-term battery life will be bad and to make matters worse keyless chucks come loose and slip frequently. This is one annoyance you do not need in your workshop. Purchase an assortment of superior carbide tipped drill bits which are stored in a holder labeling each drill bit size. Make a habit of returning every drill piece to its prospective slot at the holder after each use. Lastly, get a set of hard steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most flexible tool in the shop, and often the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries occur. Even though the most frequent, hammer accidents are often of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood grips with poor joints between the handle and head. The mind typically comes loose and the tool becomes useless. Pick a name brand quality hammer at the 16-ounce range for overall work and a smaller completing hammer for more intricate work. Avoid using big framing hammers in the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can handle just about any trimming requirements that you’ve got as a novice woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor version disk and belt sander. However, for now, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited amounts of surface space. As you embark on your first few projects you’ll discover your palm sander with a bit of effort can change rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and form rough boards with 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets using an excess supply of 100 grit paper. You’ll get this caliber of paper the most versatile on your shop.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Although low tech in theory, these tools allow you to taper edges, sew high stains and fix any imperfections in wood bits. {Begin with a typical amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, superior clamps are costly and it normally requires the novice woodworker a few years to collect a detailed set of wood clamps. Begin with a set of long”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure is still the same. Get a pair of the maximum clamps that you could spend. You may contact them for smaller adhesive jobs and enlarge them to their full length for bigger projects.

Shop Vice: A store vice installed at the end of your bench is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. A number of the greater vices offer you rapid release mechanisms that enabled the user to rapidly open and close the limbs with no tedious handle turning. The wood beamed surfaces in your vice will occasionally require replacement. I prefer to use soft pine in my vices that won’t crush or damage lots of the various forests that I work with. Whether I am working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be one of your most often used tools. Purchase a good quality name brand tape measure with a wide tape usually in the 25-foot range. Although in your store you may not be using the tape in these spans, the larger tape measures provide more rigid tapes which will not flop around and slide off the ending of planks. Assessing when you’re by yourself will be a great deal easier, and of course, quality tape measures can endure for several years.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will need additional sanding. Avoid oversized carpenter’s pencils. Their large flat leads are simply too rough for accurate measurement in the workshop.

Additional Tool and Materials: Here are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools will help you in marking the right angles in addition to chemical angles. Get the number three and two Robertson set. I discover the Robertson format works great for many woodworking projects and is the most compatible with a drill powered pieces. Last, get a set of 12-inch wood files. The expense of adhesive through all of your projects is a minor cost consideration. For that reason, it is sensible to go with the very best. I also have found over the years that I receive the best results with both indoor and outdoor jobs once I use quality outside grade glue. These resin-based compounds unlike traditional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Free Diy Woodworking Plans

The peaceful satisfaction of woodworking is an excellent adventure in this era of rushed lives, smartphones, and time-starved livelihood. With a minimal investment at the most basic tools and equipment, everyone can learn the profitable abilities of his time-tested hobby and enjoy job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

The Family Handyman

The magazine was founded in 1951[3] by Universal Publishing & Distributing. UPD sold the magazine to Webb Publishing in 1977 to pay down debts that would ultimately finish off the company. Robert Maxwell acquired Webb in 1987, and sold the magazine to the Reader's Digest Association that year.

Every issue features contributions from members of a crew of more than 1,100 reader-volunteer Field Editors. Monthly features include: Car + Garage, Stuff We Love, Home Care + Repair, Handy Hints, Top Ten Tips, Pro Tips, DIY Quiz, and Great Goofs. Both magazine and web content provides resources for do-it-yourself homeowners, including how-to instructions for improving homes, yards and vehicles.

The Family Handyman also publishes several special interest publications, tablet editions of the magazine, a DIY Tip Genius app, and The Family Handyman DIY University, an online curriculum of DIY courses.

Video: Woodworking Projects