Free Downloadable Woodworking Plans Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable thoughts and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and some of those attributes along with a few petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an instructor and a part of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking whenever they’re following because all the ideas and projects Ted’s source are simple to understand and easy. Ted McGrath spent two years researching so that he could collect enough material for a comprehensive package, and he ended up creating a really’complete’ woodworking resource.

Many may still seem unsure whether they need to be buying Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it more challenging to make the right choice. There are in fact lots of things that place Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit out of Ted’s woodworking Package. Those who are just getting started will find the thoughts and projects in Ted’s bundle quite simple. No doubt, intricate carpentry is involved; however, they will find it really simple to follow Ted’s easy step by step instructions. Currently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who purchase his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which helps beginners learn a lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers are going to be able to find any project of their choice within this bundle quite easily, even though there numerous options.

60-Day Iron Clad Money-back Guarantee

In general, this product is and those who buy it will be endorsed by a 60-day guarantee, so if this woodworking bundle fails to satisfy them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large size. Nonetheless, with a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

As there are several ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nevertheless, they didn’t mind being overrun considering the fact that this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so thorough and vast it contains just about every woodworking project a woodworker may be considering building.

This woodworking package made by Ted McGrath is really unmatchable and can’t be compared to those other woodworking bundles that are available across the net. Ted has done his very best to direct them in every possible way he can, through simple to understand textual instructions, clear images and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking jobs they will find inside. Therefore, it is certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more innovative hand tools and more woodworking power tools here, but the concept is to purchase the essential hand and power tools which novices will need. You can always increase your arsenal as you gain experience!

Free Downloadable Woodworking Plans Projects Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you’ve bought your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to complete your project. But if you’re unsure about what to do there is help available! There are several places that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of the many woodworking magazines available. Every month the writers in woodworking publications do a story about the best way best to increase your woodworking craft. Whether it’s showing you the way to apply an end to a finished job, or how to make a mortise and tenon joint, something new can be learned every month. Next, is purchasing instructional DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Free Downloadable Woodworking Plans Projects

If you are just beginning and very interested in doing a DIY job for house afterward, woodworking can be interesting. If you don’t have the right information, instruction, and skill, you may land up spending more time and money than you initially meant to spend. As a novice woodworker, you need to have space, time and the correct tools. Having said, there are a few essential factors that you should remember, before starting with any woodworking project.

1. If you’re a beginner, you must first have to be somewhat interested in woodworking. Making something new with your own hands is a particular feeling. Don’t start a project if you’re not interested, because this might land you in a bad place.

2. Consider the primary reason for creating this woodworking project. Choose the uses of this thing you are making.

3. Consider your abilities and examine the time that you have, until you begin with a project.

4. Start jobs that you can finish. If you are in the midst of a work, then it’s better not to begin any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Free Downloadable Woodworking Plans Projects

If you maintain these vital things in your mind before you begin a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much because it takes effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to opt for the woodworking projects you want to start with. As a newcomer, always pick a project that has quite a basic construct up or a very simple construction. A few simple to begin projects include, bird feeder, chairs, shelves, etc.. The moment you get hold of these techniques, you can always move to the next level of woodworking projects, such as cabinets, sheds, and others. Beginning projects should always keyword be less complicated and less frustrating so you have a better comprehension of working with forests and their tools. When the job is selected, begin selecting your own tools.

Beginners Woodworking Tools, Free Downloadable Woodworking Plans Projects

Tools would be the ways through which you will win the struggle of woodworking. A lot of people think that power tools are requires. But for beginners, basic hand tools can be very convenient and more than useful in completing a project. If woodworking is your hobby, then some tools that you would demand are:

1. Workbench – A workbench is required for exact cuts and dimensions. The workbench, when mended with vises, provide ample space to work. As a key tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make things considerably simple for you. When you purchase a hammer, constantly check the equilibrium between the weight and stand. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool helps you to cut woods at different sizes. There are various sorts of saws available in the marketplace. Decide on a size which you could handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them can help you ahead of time woodworking. You can also buy keyword energy screwdrivers as they make the work much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you demand a wrench. However, this is not a tool for beginners, but using it would make work simpler for you at a subsequent stage.

7. Drill – Drill makes it possible to create holes in timber. Power drills are more useful but they cost more. Low wattage power drills will make the job much easy.

8. Other small and basic tools – These include pens, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s no fixed price on woodworking projects. Based on the sort of project that you would like to finish, pricing can be set. The simple the project, the less cost it involves. However, at the very beginning purchasing the tools will be a little hefty. Because of this, it is better to fix a budget on the resources, then keyword on the project. Purchasing the fundamental tools will ensure that you don’t have to purchase any more material aside from the timber ply.

Time and Directions

Instructions are one of the principal things that every newcomer should follow. It’s like the woodworking Bible. Instructions manual is very simple to understand the process, what to do and how to get it done. Time also plays an important role in the building of woodworking jobs. Woodworking projects require time and so it’s crucial for a novice to have ample quantity of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. But the most essential thing keyword which can allow you to reach success is proper preparation. With appropriate planning and a strategy, it is likely to achieve success quickly. If you understand the purpose of woodworking, then the thing you need to build, the tools you require to own and the average time it’s possible to give daily; then you’re ready to go.

Conclusion, Free Downloadable Woodworking Plans Projects

All these tips and education will create the woodworking projects and plans for beginners fast to finish. Always make sure you have all the vital tools, materials, area prepared. Read the instructions for constructing a product handy. Proper strategy and preparation can help you to make a great woodworking job for your property.

|

How to Become a Master Woodworker From Your Own Home Free Downloadable Woodworking Plans Projects

Folks if you’re trying to find a way to pass time or want an alternative way to generate money they usually turn into a hobby that they enjoy. It’s very exciting to do and everyone can begin.

When doing woodworking in your home there are lots of jobs one can think of. When starting out you need to be very careful when choosing which project to begin with because there are jobs that may be too tough for a beginner. But do not be concerned about that since we are going to provide you tips on the ideal way to begin woodworking as a beginner.

Just like any other hobby woodworking demands some working equipment, therefore before you pick your job you have to know whether you’ve got the available tools to work on that project. Try not to spend a lot of money on buying equipment when starting out, buy more equipment as you get more experience and become a professional carpenter. If you enjoy your hobby then there will not be any difference between the artistic hand as well as the normal hands.

The Benefits of Woodworking Free Downloadable Woodworking Plans Projects

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking in your home will give you time to research unique jobs and learn a lot of things. That’s why it’s important to spend less money when starting out so you can manage to make mistakes and at any time learning about different projects.
It’s very important you know more about different types of wood available for creating projects. Anticipate carpenters use several types of wood quality for decorating bits, learning which kind of wood they use can allow you to prepare the wood you will need for certain jobs you may want to pursue.
Once you understand the fundamentals of wood choice and the use of different tools now you can employ them in cutting out well wood pieces and putting wood together. Knowing what to do will help you in creating good projects to satisfy your wants.

Free Downloadable Woodworking Plans Projects practice makes perfect so make sure that you practice your work every day if possible. Try out a lot of layouts utilizing various tools so you may find the hang of working with the tools. When starting out you can make a number of mistakes but with time you will learn how to properly use them and produce quality projects.

|

Starting Your First Woodworking Shop Free Downloadable Woodworking Plans Projects

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever enjoy. You may begin on a shoestring with a minimal amount of tools and equipment. A small home workshop can produce a wide variety of simple projects which can allow you to develop your creative and construction skills while rewarding you with artistic and practical wood products which you can appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let us discuss where you’ll do your woodworking, Depending on the size of your house, you might have the ability to produce a dedicated space to your woodworking tasks. This may be a reserved spot in your garage or on your cellar. Sometimes, a detached shed or outbuilding might be perfect to prepare your first shop. A heated store detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control methods, basement workshops will inevitably create dust which travels into the living area of your house. This is very true in homes with forced air heating systems in which cold air yields located in the basement draw dust up into the top levels of the house. Another benefit of detached workshops would be, of course, the noise level. It’s possible to work without disturbing the remainder of the family. A fantastic compromise could be the garage of your home.

This can help decrease the difficulties of dust and sound, however based on where you reside, a keyword garage layout may not be practical during extremes of cold or hot weather.

How to Become a Master Woodworker From Your Own Home Free Downloadable Woodworking Plans Projects

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes that they add more space to work in. Free Downloadable Woodworking Plans Projects if you’re able to have a dedicated place for a marathon all the greater. Floor gear and bench top equipment can remain in position from project to project. If this installation is not hopeless, at least try to make a chair area where equipment could be stored and pulled out as necessary. If at all possible plan for inevitable expansion as you get more tools and gear. In the beginning, set up a bench area where you can store and use most of your equipment, using a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. That will enable you to work comfortably while standing. Add a sturdy shelf below the seat to home your hand power tools and a pegboard above the seat to hang other equipment. Install a woodworking at one end of the seat on the front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Free Downloadable Woodworking Plans Projects

The scope of your startup equipment will be mostly based on your budget. Whether you’ve got big financial resources or you are starting on a shoestring consistently buy quality gear. If you can afford it, then buy your quality tools at the local construction and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or alternative local advertisements. You will find an abundance of quality gently used programs out there that belong to individuals who stumbled on that 1 molding job around the home or received tools as presents that they will never use. You can usually purchase tools for these sellers for less than half the initial price and save even more money if you create a package deal for all their unused equipment. Obviously, acquiring tools from private individuals will take extra time and perhaps travel expenditures. Weigh the benefits of traveling across town to save a few extra dollars on a inexpensive piece of gear. The extra expense of time and travel in these situations is generally justified when purchasing large ticket items such as table saws, bandsaws or large ended tools like surface planers later on.
For smaller acquisitions, a trip to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimal amount of hand equipment yet produced sophisticated and complex pieces. Concentrate on developing your skills with your startup set of resources and prevent lamenting about the equipment you wished you had.
Here is a checklist of the useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a decent pair of safety glasses which also offer some side protection for your eyes. Buy a quality oil collection that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will eventually impair your vision and affect security. Avoid wearing gloves in a workshop. Most impair eyesight and dust up quickly. You can avoid wearing all of them together if you find them uncomfortable.

The next piece of crucial safety gear you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking can be noisy and long-term exposure to those sound levels may affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most employees tire quicker when subjected to elevated noise levels. Last, wear a cap to keep the dust from your hair. I’m keeping the dust out of my hair. I am good to go!

Power Hand Saw: Frequently known as a skill saw following the favorite brand name, this can prove to be the most flexible tool in a start-up workshop. In fact, in the hands of an expert, a power hand saw can be used to construct an whole house. At some point, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a budget enables him to do cross cuts, rip cuts and even elaborate angle cuts. As mentioned before get an excellent brand saw. Stay away from cheap unknown brands. These tend to cut back and will burn out before you even start your second project. After choosing the proper saw put in an excellent blade. Most skill saws include a starter blade of lesser quality even if they are a fantastic saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Begin with a hybrid . All these have a balanced enamel count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument can’t just cut corners. It is perfect for cutting holes in timber too like handle slots. Eventually, you’ll want to get a band saw. Bandsaws are even more flexible but a quality floor unit could be expensive. A jigsaw may be a good stop gap to the novice woodworker.

Buy an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck over the standard 3/8 inch version. Down the street, the 1/2 inch version will prove to be more versatile. Through tough lessons learned, I have found that buying quality, in this scenario, is much more critical than ever. Cheaper drills tend to get very short run times and have to be recharged frequently. Their long-term battery life will be bad and to make matters worse keyless chucks come loose and slip frequently. This is one annoyance you do not want on your workshop. Purchase an range of superior carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning each drill bit to its potential slot at the holder after each use. Lastly, get a set of hard steel driver bits. Your drill may also be a flexible screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop accidents happen. Although the most frequent, hammer injuries are often of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable grip. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers usually have wood handles with inferior joints between the head and handle. The head typically comes loose and the tool becomes useless. Pick a name brand quality hammer in the 16-ounce scope for general work and also a smaller completing hammer for more intricate work. Avoid using large framing hammers in the workshop and any with dimpled head tips. These kinds of hammers are more suited for rough framing tasks and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can manage just about any trimming requirements that you’ve got as a beginner woodworker. As your woodworking skills evolve, you’ll likely upgrade to a floor version disc and belt sander. But for now, the ever-versatile palm sander can clean up borders, cross cuts and even limited quantities of surface area. As you embark on the first few projects you might discover that your palm sander with just a little bit of effort can change rough looking inventions into virtual functions of art! You can use your palm sander to sand and shape rough boards with 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets with an extra supply of 100 grit paper. You’ll find this grade of paper that the most versatile in your store.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Although low tech in concept, these tools enable you to taper edges, sew high stains and fix any imperfections in timber pieces. {Begin with a typical number 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold down your wood bits as you work on them. Unfortunately, superior clamps are expensive and it normally takes the beginner woodworker a couple of years to accumulate a detailed set of wood clamps. Start with a pair of extended”pipe” clamps. Today the pipe has been replaced with extended steel shafts, but the structure remains the same. Receive a pair of the maximum clamps which you can spend. You can get in touch with them for smaller adhesive jobs and enlarge them to their entire length for bigger jobs.

Shop Vice: A shop vice installed at the end of the seat is perfect for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices using their wood clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the better vices offer you rapid release mechanisms that enabled the consumer to quickly open and close the jaws with no dull handle rotation. The wood beamed surfaces on your vice will occasionally require replacement. I would rather use soft pine in my vices which won’t crush or damage lots of the various woods that I work with. Whether I am working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be among your most frequently used tools. Buy a good quality name brand tape measure with a wide tape usually in the 25-foot selection. Even though in your store you might not use the tape at these lengths, the bigger tape steps provide more rigid tapes which won’t flop around and slide off the ending of planks. Assessing when you’re on your own will be a lot simpler, and naturally, quality tape steps can last for several years.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the wood. Avoid oversized carpenter’s pencils. Their large flat leads are just too coarse for precise measurement in the workshop.

Other Tool and Materials: Listed below are a couple other handy tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools will help you in marking the right angles as well as chemical angles. Get the number three and two Robertson set. I discover that the Robertson format works great for most woodworking jobs and will be the most compatible with a drill powered bits. Last, get a set of 12-inch wood files. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and repairing small mistakes along the way.

Adhesives: Not many glues are made equal. Stay away from inexpensive house brands marketed as carpenter’s glue. The cost of adhesive through all your jobs is a little cost consideration. Therefore, it makes sense to go with the very best. I also have found over time that I get the best results with both indoor and outdoor jobs once I use quality outdoor grade glue. All these resin-based compounds unlike traditional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Free Downloadable Woodworking Plans Projects

The peaceful gratification of woodworking is an excellent experience in this era of hurried lives, smart phones, and time-starved careers. With a minimum investment at the most rudimentary tools and equipment, everyone can learn the rewarding skills of his time-tested avocation and enjoy job after project!

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

  • NKBA Behavior Study Details Kitchen Habits and Impact on Design

    HACKETTSTOWN, N.J. —  How do people really use their kitchens? This is what the National Kitchen & Bath Association (NKBA) endeavored to find out in its latest market research, which offers a detailed analysis into the evolving way homeowners live in their kitchens and how this drives remodeling preferences in the $74 billion kitchen market.
     
    The Lifestyle Segmentation Report, released this month, identifies homeowner attitudes and behaviors regarding cooking, meal preparation, entertaining and kitchen design, and the influence of their lifestyles on the kitchen remodel and installation process.
     
    The national online survey was conducted among nearly 800 adults with household income of $40,000 or higher who had remodeled their kitchen or planned to remodel between November 2016 and August 2018. The survey segmented respondents by their confidence levels regarding cooking abilities, confidence in their kitchen design abilities, and their comfort level with using technology in the kitchen.
     
    “This exclusive research is somewhat of a departure from our traditional studies, which typically analyze product categories, design trends, size of the market and business projections,” said Bill Darcy, NKBA CEO. “It’s the first time we are looking at how changes in consumer lifestyle impact the actual use of our industry’s product and services. The data provides valuable insight for designers, remodelers, dealers, showroom associates and other professionals in how they serve their clients. This commitment to research and analysis reinforces NKBA’s thought leadership in the marketplace, and offers strategic information for the benefit of our membership.”
     
    The report provides data on family dining, meal preparation, entertaining and other activities occur in the kitchen (paying bills, homework, and more). Also reported is how homeowners use technology in the space and what storage needs they require. Furthermore, the study offers a correlation between these elements and design, the need for professionals in the process, how and where consumers shop for and buy kitchen products, and more.
     
    The full Lifestyle Segmentation Report is available for purchase at the NKBA store. For more information, click on NKBA-Lifestyle-Segmentation-Report or NKBA-Lifestyle-Segmentation-Executive-Summary.
     
     The National Kitchen & Bath Association (NKBA) is the not-for-profit trade association that owns the Kitchen & Bath Industry Show® (KBIS), as part of Design & Construction Week (DCW). With nearly 14,000 member companies representing tens of thousands of members in all segments of the kitchen and bath industry, the NKBA has educated and led the industry since the association’s founding in 1963. The NKBA envisions a world where everyone enjoys safe, beautiful and functional kitchen and bath spaces. The mission of the NKBA is to inspire, lead and empower the kitchen and bath industry through the creations of certifications, marketplaces and networks. For more information, visit www.NKBA.org  

Rage (video game)

Rage (stylized as RAGE) is a first-person shooter video game developed by id Software, released in November 2010 for iOS and later October 2011 for Microsoft Windows, the PlayStation 3, and the Xbox 360. It was first shown as a tech demo on June 11, 2007, at the Apple Worldwide Developers Conference, and was officially announced on AugustĀ 2, 2007 at QuakeCon.[1][3] Rage uses id Software's id Tech 5 game engine, and was the final game released by the company under the supervision of founder John Carmack.

Rage is set in a post-apocalyptic near future, following the impact of the asteroid 99942 Apophis on Earth.[4] Players take control of Nicholas Raine, a soldier put into hibernation in an underground shelter who emerges into the wasteland a century later, and finds himself a wanted man by an oppressive organization known as The Authority. The game has been described as similar to the movie Mad Max 2, and to video games such as Fallout and Borderlands.[5]

Rage received mainly positive reviews, with reviewers praising the game's combat mechanics and graphics, while criticizing the lack of story, characters, and direction. The iOS version, titled Rage: Mutant Bash TV, received mixed to positive reviews. Bethesda announced a sequel, Rage 2, in May 2018.

Video: Woodworking Tools