Free Dresser Plans Woodworking | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable thoughts and projects.

The package has various qualities which make it the”#1 woodworking Resource” and a few of those attributes along with a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an educator and a member of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking whenever they are after because most of the thoughts and jobs Ted’s resource are easy to comprehend and simple. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive bundle, and he ended up making a truly’complete’ woodworking source.

Many may still appear unsure if they need to be purchasing Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it even more difficult to make the ideal option. There are in fact many things that place Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit from Ted’s woodworking Package. Those that are only getting started will discover the ideas and jobs in Ted’s bundle quite simple. No doubt, complicated carpentry is demanded; nonetheless, they will find it really simple to follow Ted’s easy step by step directions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who purchase his package, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page source that will help beginners learn a whole lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers are going to be able to find any project of their choice in this package quite readily, even though there so many options.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and people who buy it’ll be endorsed by a 60-day warranty, so if this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long time to down due to its large dimensions. Yet, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nonetheless, they didn’t mind being overwhelmed considering how this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking package is so thorough and vast it contains just about every woodworking project a woodworker may be considering building.

This woodworking package created by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking packages that can be found across the internet. Ted has done his best to direct them in every possible way he can, through easy to comprehend textual instructions, clear pictures and even movies as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking jobs they will find inside. So, it’s definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and more woodworking power tools , but the idea is to buy the essential hand and power tools that novices will need. You may always increase your arsenal as you gain experience!

Free Dresser Plans Woodworking Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you’ve bought your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. But if you are unsure about what to do there is help available! There are lots of areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of the several woodworking magazines available. Every month the authors in woodworking magazines do a story about the best way to increase your woodworking craft. When it’s showing you how to apply an end to a completed job, or how to make a mortise and tenon joint, something new can be heard every month. Next, is buying educational DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to work with a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Free Dresser Plans Woodworking

If you’re a beginner and very enthusiastic about doing a DIY project for home then, woodworking can be interesting. If you do not have the proper information, education, and skill, you may wind up spending more time and money than you originally intended to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having said, there are a few essential factors that you need to remember, before starting with any woodworking project.

1. If you’re a beginner, you should first need to be very interested in woodworking. Creating something new with your own hands is a special sense. Do not start a project if you are not interested, as this may land you in a terrible location.

2. Think of the main reason behind making this woodworking project. Choose the uses of the thing you are making.

3. Consider your skills and examine the time that you have, before you start with a project.

4. Start jobs which you’re able to finish. If you are in the midst of some work, then it’s wise not to start any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Free Dresser Plans Woodworking

If you keep these essential points in mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires planning as much as it requires effort. So how can you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking projects you wish to begin with. As a newcomer, always select a job which has quite a basic build up or a simple construction. Some simple to start projects include, bird feeder, benches, shelves, etc.. The moment you find the techniques, you could always move to the next level of woodworking projects, such as cabinets, sheds, along with others. Beginning jobs should always keyword be complicated and less frustrating so that you have a better knowledge of working with woods and their resources. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Free Dresser Plans Woodworking

Tools would be the ways whereby you will win the struggle of woodworking. Many men and women believe power tools are needs. However, for novices, basic hand tools can be very handy and more than useful in completing a project. If woodworking is your hobby, then a few tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and dimensions. The workbench, when fixed with vises, offer ample space to work. As a primary tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer will make things much easy for you. When you buy a hammer, always assess the balance between the weight and stand. Always select a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool helps you to cut forests at different sizes. There are various sorts of saws out there in the marketplace. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Possessing all of them will help you in advance woodworking. You can also buy keyword power screwdrivers since they make the work much faster.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape gives you the capacity to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you demand a wrench. However, this isn’t a tool for novices, but using it would make work easier for you at a subsequent stage.

7. Drill – Drill helps you make holes in timber. Low wattage power drills can make the job much easy.

8. Other small and fundamental tools – These include pens, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s not any fixed cost on woodworking projects. Based on the sort of project that you want to finish, pricing can be set. The simple the project, the less cost it involves. However, at the beginning buying the tools will probably be a little hefty. Because of this, it is better to resolve a budget on the resources, then keyword on the undertaking. Buying the basic tools will make certain you do not have to buy any more material aside from the timber ply.

Time and Directions

Directions are among the principal things which each and every newcomer should follow. It’s like the woodworking Bible. Instructions guide is quite simple to understand the process, what to do and how to do it. It keyword is a systematic guide for completing the project. Time also plays a significant role in the building of woodworking jobs. Woodworking projects demand time and so it is crucial for a beginner to have ample quantity of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that will make the work easy. But the most essential thing keyword that will allow you to achieve success is proper preparation. With proper planning and a plan, it is possible to achieve success quickly. If you know the purpose of woodworking, the thing you need to construct, the tools you require to possess and the typical time you can give every day; then you are all set to go.

Conclusion, Free Dresser Plans Woodworking

These strategies and instruction will create the woodworking projects and plans for beginners quickly to complete. Always ensure that you have all the vital tools, materials, area ready. Keep the instructions for building an item handy. Proper strategy and planning can help you to earn a fantastic woodworking job for your property.

|

Starting Your First Woodworking Shop Free Dresser Plans Woodworking

Folks if you’re trying to find a way to pass time or desire an alternate way to generate money they usually turn into a hobby that they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based company. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you need to be quite careful when choosing which job to start out with since you will find jobs that can be too tough for a beginner. But do not worry about that since we are going to provide you guidelines on the ideal means to begin woodworking as a beginner.

Just like any other hobby woodworking requires some working gear, therefore before you pick your job you need to know if you’ve got the available tools to work on such a project. Try not to invest a lot of money on purchasing equipment when starting out, buy more gear as you gain more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no difference between the hand and the normal hands.

Starting Your First Woodworking Shop Free Dresser Plans Woodworking

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking at home will provide you time to explore unique projects and learn so many things. That is why it’s important to spend less money when starting out so you can manage to make mistakes and at any time learning about various projects.
It’s very important you know about different kinds of wood available for creating projects. Anticipate carpenters utilize several kinds of wood quality for decorating bits, learning which type of wood they use can help you prepare the wood you’ll need for specific projects you might want to pursue.
As soon as you know the fundamentals of wood choice and the usage of different tools you can now implement them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in building good projects to satisfy your wants.

Free Dresser Plans Woodworking practice makes perfect so be sure that you practice your work daily if at all possible. Try out a lot of designs utilizing a variety of tools so that you may find the hang of working with the tools. When starting out you may earn a number of errors but with time you will learn how to properly use them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Free Dresser Plans Woodworking

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever appreciate. You may begin on a shoestring with a minimal number of gear and equipment. A little home workshop can produce a wide variety of simple projects which can allow you to develop your creative and construction abilities while rewarding you with practical and artistic wood products which you can appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let’s discuss where you’ll do your woodworking, based on the dimensions of your home, you may have the ability to produce a dedicated space into your woodworking tasks. This may be a reserved place on your garage or in your cellar. Sometimes, a detached shed or outbuilding may be perfect to prepare your very first shop. A heated store detached from your home provides one distinct advantage: better dust control. Without complex dust control systems, basement workshops will inevitably produce dust which travels to the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns found in the cellar draw up dust into the top levels of the house. Another benefit of detached workshops is, of course, the noise level. It’s possible to work without bothering the remainder of the family. A fantastic compromise could be the garage of your home.

This might help minimize the difficulties of dust and noise, however depending on where you live, a keyword garage layout might not be sensible during extremes of hot or cold weather.

Finding Woodworking Projects and Plans for Beginners Free Dresser Plans Woodworking

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes they add more space to work in. Free Dresser Plans Woodworking if you’re able to have a dedicated spot for a marathon all the better. Floor tools and bench top equipment can remain in place from project to project. If this setup is not impossible, at least attempt to create a bench area where equipment can be stored and pulled out as needed. If possible plan for inevitable expansion as you get more tools and gear. At the start, establish a seat area where you are able to shop and use most of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Add a sturdy shelf beneath the seat to home your hands power tools along with a pegboard over the bench to hang other gear. Install a woodworking vice at one end of the bench on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Free Dresser Plans Woodworking

The reach of your start-up equipment will be largely based on your budget. Whether you’ve got big financial resources or you’re starting on a shoestring consistently purchase quality equipment. If you can afford it, purchase your quality tools at your local construction and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or other local advertisements. You will find plenty of quality lightly used programs out there which belong to individuals who embarked on that one molding project around the house or received tools as gifts that they will never use. You can usually purchase tools for these sellers for less than half the initial price and save even more money if you create a package deal for all their unused equipment. Obviously, getting tools from private people will require additional time and possibly travel expenditures. Weigh the advantages of traveling across town to save a few extra bucks on a inexpensive piece of gear. The extra expense of travel and time in these situations is usually justified when buying large ticket items like table saws, bandsaws or large ended tools like surface planers in the future.
For smaller acquisitions, a visit to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimum amount of hand gear yet produced sophisticated and complex bits. Focus on developing your skills with your startup set of tools and avoid lamenting about the equipment you wished you had.
Here’s a checklist of the useful tools You Will Need to get started:
Safety Gear: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer you some side protection to your eyes. Buy a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually impair your vision and influence security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up fast. You can avoid wearing all of them together if you find them uncomfortable.

The next bit of critical safety equipment that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking may be noisy and long-term exposure to those noise levels can affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Frequently known as a skill saw after the favorite name, this can prove to be the most flexible tool in a startup workshop. In reality, in the hands of a professional, a power hand saw can be employed to build an whole house. As mentioned earlier get a quality brand saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your second job. After choosing the right saw install an excellent blade. Most skill saws include a starter blade of lower quality even if they’re a good saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Begin with a hybrid . These possess a balanced tooth count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument cannot just cut curves. It’s perfect for cutting holes in wood also like manage slots. Eventually, you’re going to want to get a band saw. Bandsaws are even more flexible but a excellent floor unit can be expensive. A jigsaw can be a good stop gap for the novice woodworker.

Purchase an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the conventional 3/8 inch model. Down the street, the 1/2 inch version will end up being more versatile. Through hard lessons learned, I have discovered that buying quality, in this scenario, is much more critical than ever. Cheaper drills tend to get very short run times and have to be recharged frequently. Their long-term battery life tends to be poor and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you don’t need in your workshop. Buy an assortment of quality carbide tipped drill bits that are kept in a holder tagging each drill bit size. Make a habit of returning every drill piece to its prospective slot at the holder after every use. Last, get a pair of hard steel driver bits. Your drill can also be a versatile screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer remains as the most versatile instrument in the store, and often the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop accidents occur. Although the most ordinary, hammer accidents are usually of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and comes with a comfortable grip. Many hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The head typically comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce scope for general work and a smaller finishing hammer for more complex work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more appropriate for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage pretty much any sanding requirements you have as a beginner woodworker. As your woodworking abilities evolve, you will probably upgrade to a floor model disc and belt sander. But for now, the ever-versatile palm sander can clean up borders, cross cuts and even limited amounts of surface area. As you embark on your first few projects you might discover your palm sander using just a little bit of effort can transform rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and shape rough planks with 100 grit paper and after finish your job with 200 or 300 grit paper. Purchase an range of sandpaper sheets using an excess source of 100 grit paper. You’ll get this caliber of paper that the most versatile on your shop.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Though low tech in theory, these tools enable you to taper borders, sew high stains and correct any imperfections in wood bits. {Begin with a typical number 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold off your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it normally takes the beginner woodworker a few years to collect a comprehensive set of timber clamps. Start with a pair of long”pipe” clamps. Now the pipe was replaced with long steel shafts, however, the structure is still the same. Receive a pair of the longest clamps that you can afford. You may contact them for smaller glue jobs and enlarge them to their entire length for bigger jobs.

Shop Vice: A shop vice installed in the end of your seat is perfect for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices using their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enable the consumer to rapidly open and close the limbs without tedious handle turning. The wood beamed surfaces in your vice will periodically require replacement. I would rather use soft walnut in my vices that won’t crush or damage lots of the different woods that I utilize. Whether I’m working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of your most frequently used tools. Purchase a fantastic quality name brand tape measure with a broad tape usually in the 25-foot range. Although in your store you might not be using the tape at these lengths, the bigger tape steps provide more rigid tapes which won’t flop around and slide off the ending of planks. Measuring when you are on your own will be a lot simpler, and naturally, quality tape steps can last for many decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the timber. Avoid oversized carpenter’s pencils. Their large flat leads are simply too rough for precise measurement in the workshop.

Other Tool and Materials: Here are a few other useful tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools can assist you in marking the right angles in addition to chemical angles. Get the number three and two Robertson set. I find that the Robertson format works best for many woodworking projects and will be the most compatible with a drill powered pieces. Last, get a set of 12-inch wood files. The cost of adhesive through all your jobs is a minor cost consideration. For that reason, it is sensible to decide on the best. I also have found over the years that I receive the best results with both indoor and outdoor projects when I use quality outdoor grade glue. These resin-based compounds unlike conventional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Free Dresser Plans Woodworking

The peaceful gratification of woodworking is an excellent experience in this day and age of hurried lives, smartphones, and time-starved livelihood. With a minimal investment at the most basic equipment and tools, anyone can learn the rewarding abilities of his time-tested avocation and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

List of Parks and Recreation characters

The primary characters of the American television comedy series Parks and Recreation are the employees of the parks department of Pawnee, a fictional Indiana town. The protagonist is Leslie Knope (Amy Poehler), the deputy parks director as well as serving on city council, and the rest of the ensemble cast consists of her friends and co-workers, including nurse Ann Perkins (Rashida Jones), parks director Ron Swanson (Nick Offerman), and parks department employees Tom Haverford (Aziz Ansari), April Ludgate (Aubrey Plaza), Andy Dwyer (Chris Pratt), Jerry Gergich (Jim O'Heir), and Donna Meagle (Retta).

While most of the main cast have been with the series since it debuted in April 2009, actors Rob Lowe and Adam Scott joined the cast late in the second season portraying Chris Traeger and Ben Wyatt, two state auditors who later take permanent jobs in Pawnee. Paul Schneider was a permanent cast member during the first two seasons as city planner Mark Brendanawicz, but he departed at the end of season two. Billy Eichner who portrays Craig Middlebrooks, the "associate administrator" of the Pawnee parks department, recurred throughout the show's sixth season until he was promoted to the main cast in the fourth episode of the seventh season. The majority of Parks and Recreation episodes are set in Pawnee, and most of the recurring and supporting characters are friends of the main characters or residents of the town.

Several guest stars have made appearances on the show, including Louis C.K., John Larroquette, Justin Theroux and Parker Posey. Megan Mullally, Offerman's real-life wife, played his character's ex-wife Tammy Swanson, and Poehler's former husband Will Arnett made an appearance as a man on a blind date with Leslie. Several of Poehler's past colleagues on the sketch comedy series Saturday Night Live have appeared on Parks and Recreation, including Fred Armisen, Will Forte and Andy Samberg.

Video: Woodworking Tools