Free Easy Woodworking Project Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable ideas and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and some of those attributes alongside a few petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, she’s also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they are after because most of the ideas and projects Ted’s resource are easy to understand and easy. Ted McGrath spent two years researching so he could collect enough material for a comprehensive package, and he ended up creating a really’complete’ woodworking source.

Many may still appear unsure if they need to be buying Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it more difficult to make the right option. There are actually many things that set Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. Those that are just getting started will discover the ideas and jobs in Ted’s bundle quite simple. No doubt, intricate carpentry is involved; however, they will discover that it’s really simple to follow Ted’s easy step by step instructions. Presently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who buy his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source that helps beginners learn a lot about woodworking. They will also have the ability to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers are going to have the ability to find any job of their choice in this package quite readily, though there so many options.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who purchase it will be endorsed by a 60-day warranty, so when this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long time to down because of its large size. Yet, with a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

As there are several ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nonetheless, they did not mind being overwhelmed considering how this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design package is so thorough and vast it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking package made by Ted McGrath is really unmatchable and can’t be compared to those other woodworking packages that are available across the internet. Ted has done his best to guide them in every conceivable way he could, through easy to understand textual instructions, clear images and even movies as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking projects they will find inside. So, it’s certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and more woodworking power tools , but the idea is to buy the essential hand and power tools that beginners will need. You can always add to your toolbox as you get experience!

Free Easy Woodworking Project Plans Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you’ve purchased your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to complete your project. However, if you’re unsure about what to do there is help available! There are several places that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Each month the authors in woodworking publications do a story on the best way to improve your woodworking craft. When it is showing you the way you can apply a finish to a completed project, or how to make a mortise and tenon joint, something new could be heard each month. Next, is buying educational DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to work with a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Free Easy Woodworking Project Plans

If you’re a beginner and very interested in doing a DIY job for house then, woodworking can be fun. If you don’t have the right information, instruction, and skill, you may land up spending more money and time than you originally meant to spend. As a novice woodworker, you need to have space, time and the appropriate tools. Having said, there are a few essential aspects that you need to keep in mind, before beginning with any woodworking project.

1. If you’re a beginner, you must first need to be somewhat interested in woodworking. Creating something new with your own hands is a special feeling. Don’t begin a job if you are not interested, because this might land you in a terrible place.

2. Consider the main reason behind creating this woodworking project. Decide on the uses of this thing you’re making.

3. Consider your skills and examine the time you have, until you start with a project.

4. Start jobs that you’re able to finish. If you’re in the middle of some work, then it is wise not to begin any project in any way.

The Benefits of Woodworking Free Easy Woodworking Project Plans

If you maintain these vital things in mind before beginning a woodworking project, it is going to become very easy for you to reach success. Woodwork requires planning as much because it requires effort. So how can you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking jobs that you wish to start with. As a newcomer, always pick a project that has a very basic build up or a very simple construction. Some simple to begin projects comprise, bird feeder, chairs, shelves, etc.. The moment you get hold of the techniques, you can always move to the next level of woodworking jobs, such as cabinets, sheds, and others. Beginning jobs should keyword be less complicated and less frustrating so you have a better comprehension of working with woods and their resources. When the job is selected, begin selecting your own tools.

Beginners Woodworking Tools, Free Easy Woodworking Project Plans

Tools would be the ways whereby you will win the struggle of woodworking. A lot of men and women believe power tools are requires. But for novices, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and dimensions. Even the workbench, when mended with vises, offer ample space to operate. As a primary tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters much simple for you. When you buy a hammer, constantly check the balance between the weight and stand. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool helps you to cut forests at several sizes. There are various sorts of saws out there in the market. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian types and standard flat kind. Having all of them will help you in advance woodworking. You might even purchase keyword power screwdrivers as they make the job much faster.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape gives you the capacity to quantify wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you require a wrench. Nonetheless, this isn’t a tool for beginners, but having it would make work simpler for you in a later stage.

7. Drill – Drill makes it possible to make holes in timber. Power drills are more useful but they cost more. Low wattage power drills can make the job much simple.

8. Additional small and basic tools – These include pencils, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s not any fixed price on woodworking jobs. Based on the type of project you want to finish, pricing could be determined. The simple the job, the less cost it involves. However, at the very beginning buying the tools will probably be a little hefty. Because of this, it is better to resolve a budget on the tools, then keyword on the project. Buying the fundamental tools will make certain you do not need to purchase any more material aside from the timber ply.

Time and Instructions

Directions are among the principal things that each and every beginner should follow. It is like the woodworking Bible. Instructions manual is quite simple to comprehend the procedure, what to do and the way to get it done. Time also plays an important role in the building of woodworking projects. Woodworking projects require time and so it’s necessary for a beginner to have ample amount of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that would make the work easy. Nevertheless, the most indispensable thing keyword which can help you to achieve success is proper preparation. With appropriate planning and a plan, it’s possible to achieve success immediately. If you understand the purpose of woodworking, the thing that you need to construct, the tools you require in order to possess and the typical time it’s possible to devote daily; then you are ready to go.

Conclusion, Free Easy Woodworking Project Plans

All these strategies and instruction will create the woodworking projects and plans for beginners fast to complete. Always make sure that you have all the essential tools, materials, area prepared. Keep the instructions for building an item handy. Appropriate strategy and preparation will allow you to make a fantastic woodworking project for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Free Easy Woodworking Project Plans

People if you’re looking for a way to pass time or desire an alternate method to make money they usually turn into a hobby they enjoy. It is very exciting to do and everyone can begin.

When doing woodworking in your home there are lots of jobs one can think of. When starting out you have to be quite careful when choosing which project to begin with since there are jobs which can be too tough for a beginner. But don’t worry about that since we will give you tips on the right means to begin woodworking as a newcomer.

The same as any other hobby woodworking demands some working equipment, therefore before you pick your job you need to be aware of whether you’ve got the available tools to work on such a project. Try not to spend a lot of cash on purchasing equipment when starting out, buy more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there will not be any gap between the hand and the normal hands.

How to Become a Master Woodworker From Your Own Home Free Easy Woodworking Project Plans

To keep yourself updated you must disseminate with various brands tools and forests. Woodworking in your home will provide you time to research different projects and find out so many things. That’s why it’s important to invest less money when starting out so you can manage to make errors and at any time learning about various jobs.
It’s extremely important that you know more about the different kinds of wood available for making projects. Anticipate carpenters utilize several types of wood quality for decorating bits, learning which type of wood that they use can allow you to prepare the wood you will need for certain projects you may choose to pursue.
As soon as you know the fundamentals of wood selection and the usage of different tools you can now employ them in cutting well wood pieces and placing wood together. Knowing what to do can assist you in building good projects to fulfill your wants.

Free Easy Woodworking Project Plans practice makes perfect so be sure you practice your work every day if at all possible. Try out lots of layouts using a variety of tools so that you can find the hang of working with the tools. When starting out you may make a number of mistakes but with time you will learn how to properly utilize them and produce quality projects.

|

The Benefits of Woodworking Free Easy Woodworking Project Plans

Woodworking as a hobby may be one of the most rewarding experiences you will ever appreciate. You can begin on a shoestring with a minimum number of gear and equipment. A small home workshop can produce a broad variety of simple projects that can allow you to develop your creative and building skills while rewarding you with artistic and practical wood products which you can appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let’s discuss where you will do your woodworking, based on the dimensions of your home, you may have the ability to create a dedicated space to your woodworking activities. This might be a reserved spot in your garage or on your cellar. In some cases, a detached shed or outbuilding may be perfect to set up your very first store. A heated shop detached from your home provides one distinct advantage: better dust control. Without complex dust control systems, basement workshops will inevitably produce dust which travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air yields found in the basement draw up dust into the upper levels of the home. Another benefit of detached workshops is, of course, the noise level. You can work without disturbing the rest of the household. A good compromise could be the garage of your property.

This can help decrease the difficulties of dust and noise, however based on where you reside, a keyword garage layout may not be sensible during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Free Easy Woodworking Project Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes they include more space to function in. Free Easy Woodworking Project Plans if you’re able to have a dedicated spot for a workshop all the greater. Floor tools and bench top gear can stay in place from project to project. If this setup is not hopeless, at least attempt to make a chair area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable growth as you acquire more tools and gear. In the beginning, set up a seat area where you are able to shop and use most of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. This will let you work comfortably while standing. Insert a sturdy shelf beneath the bench to house your hands power tools and a pegboard over the bench to hang additional gear. Install a woodworking vice at one end of the seat on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Free Easy Woodworking Project Plans

The reach of your start-up equipment will be mostly based on your budget. Whether you have got large financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, then purchase your quality tools in the local construction and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or other regional advertisements. You will find an abundance of quality lightly used tools out there that belong to individuals who embarked on that one molding project around the house or obtained tools as presents that they won’t ever utilize. You can usually buy tools for these sellers for under half the initial price and save even more money should you create a package deal for all their unused equipment. Of course, acquiring tools from private people will take extra time and possibly travel expenses. Weigh out the advantages of traveling around town to save a few added bucks on a inexpensive piece of equipment. The excess cost of travel and time in these situations is usually justified when purchasing large ticket items like table saws, bandsaws or large ended tools like surface planers later on.
For smaller acquisitions, a visit to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimum quantity of hand gear yet produced sophisticated and intricate pieces. Focus on developing your abilities with your start-up set of tools and prevent lamenting about the gear you wished you had.
Here’s a checklist of the useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a nice pair of safety glasses that also offer you some side protection for your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually impair your vision and influence safety. Avoid wearing gloves at a workshop. Most impair vision and dust up fast. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of critical safety gear that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking can be long-term and noisy exposure to these sound levels can affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire faster when exposed to elevated noise levels. These may contain earplugs or full ear keyword muff protectors. I find that a quality set of ear muff protectors is ideal for hearing protection.

Lastly, put on a cap to keep the dust from your hair. I prefer a simple ball cap along with my ear muffs and eye protection. I’m keeping the dust from my hair. I’m all set!

Power Hand Saw: Often known as a skill saw following the popular brand name, this can end up being the most flexible instrument in a startup workshop. In fact, at the hands of a professional, a power hand saw can be employed to construct an entire property. At some point, you’ll want to buy a table saw, but for the time being, a power hand saw for the woodworker on a funding enables him to do cross cuts, rip cuts and even elaborate angle cuts. As mentioned before get an excellent manufacturer saw. Stay away from cheap unknown brands. These tend to cut inaccurately and will burn out before you start your second project. After choosing the right saw put in an excellent blade. Most skill saws come with a starter blade of lesser quality even if they’re a good saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add great flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument cannot only cut curves. It is perfect for cutting holes in timber also like manage slots. At some point, you’re going to want to obtain a ring saw. Bandsaws are much more flexible but a excellent floor unit could be expensive. A jigsaw can be a good stop gap to the novice woodworker.

Purchase an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck within the conventional 3/8 inch version. Through hard lessons learned, I have found that purchasing quality, in this scenario, is much more crucial than ever. Cheaper drills tend to have very short run times and need to be recharged frequently. Their battery life will be poor and to make things worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t want in your workshop. Purchase an range of superior carbide tipped drill bits which are kept in a holder tagging each drill bit size. Create a habit of returning every drill piece to its potential slot in the holder after each use. Last, get a pair of tough steel driver bits. Your drill can also be a versatile screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer remains as the most versatile instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents occur. Although the most ordinary, hammer accidents are usually of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and features a comfortable handle. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers generally have wood grips with inferior joints between the handle and head. The mind typically comes loose and the instrument becomes useless. Select a name brand quality hammer at the 16-ounce range for overall work and a smaller completing hammer for more intricate work. Avoid using large framing hammers in the workshop and any with dimpled mind tips. These kinds of hammers are more suited to rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can handle just about any trimming requirements that you have as a novice woodworker. As your woodworking abilities evolve, you’ll likely update to a floor version disk and belt sander. However, for now, the ever-versatile palm sander may clean up edges, cross cuts and even limited quantities of surface space. As you embark on the first few projects you’ll find your palm sander using just a little bit of effort can transform rough looking creations into virtual works of art! You can use your palm sander to sand and form rough boards using 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets with an excess supply of 100 grit paper. You’ll get this grade of paper that the most versatile in your shop.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in theory, these tools enable you to taper borders, flatten high spots and correct any imperfections in timber bits. {Start with a typical amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold off your wood pieces as you work on them. Unfortunately, superior clamps are costly and it normally requires the beginner woodworker a few years to accumulate a comprehensive set of timber clamps. Start with a pair of extended”pipe” clamps. Today the pipe was replaced with long steel shafts, but the structure is still the same. Receive a set of the longest clamps that you can afford. You may contact them for smaller adhesive jobs and enlarge them to their entire length for bigger projects.

Shop Vice: A store vice installed at the end of the bench is ideal for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and avoid metal functioning vices with steel jaws. Woodworking vices with their wood clamping surfaces can securely hold wood bits without marring or damaging them. A number of the greater vices offer quick release mechanisms that enabled the user to rapidly open and close the limbs without dull handle rotation. The timber clamping surfaces in your vice will occasionally need replacement. I prefer to utilize soft pine in my vices that will not crush or damage lots of the various woods that I utilize. Whether I am working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be one of the most frequently used tools. Buy a good quality name brand tape measure with a wide tape usually in the 25-foot selection. Even though in your store you might not use the tape at these spans, the bigger tape steps provide more rigid tapes which will not flop around and slide off the end of planks. Assessing when you are on your own will be a great deal easier, and of course, quality tape measures can endure for several years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need additional sanding. Avoid oversize carpenter’s pencils. Their large flat leads are simply too coarse for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools can assist you in marking the right angles as well as chemical angles. Also, get an range of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find the Robertson format works great for many woodworking jobs and will be the most compatible with a drill powered bits. Last, get a set of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and fixing small mistakes along the way.

Adhesives: Not many glues are made equal. Stay away from cheap house brands marketed as carpenter’s glue. The cost of adhesive through all your jobs is a minor cost consideration. Therefore, it is sensible to decide on the very best. I also have discovered over the years that I receive the best results with both indoor and outdoor jobs when I use quality outdoor grade glue. These resin-based compounds unlike traditional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, Free Easy Woodworking Project Plans

The peaceful satisfaction of woodworking is an excellent experience in this day and age of hurried lives, smartphones, and time-starved livelihood. With a minimal investment in the most basic equipment and tools, everyone can learn the profitable abilities of his time-tested avocation and revel in project after project!

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

  • NKBA Behavior Study Details Kitchen Habits and Impact on Design

    HACKETTSTOWN, N.J. —  How do people really use their kitchens? This is what the National Kitchen & Bath Association (NKBA) endeavored to find out in its latest market research, which offers a detailed analysis into the evolving way homeowners live in their kitchens and how this drives remodeling preferences in the $74 billion kitchen market.
     
    The Lifestyle Segmentation Report, released this month, identifies homeowner attitudes and behaviors regarding cooking, meal preparation, entertaining and kitchen design, and the influence of their lifestyles on the kitchen remodel and installation process.
     
    The national online survey was conducted among nearly 800 adults with household income of $40,000 or higher who had remodeled their kitchen or planned to remodel between November 2016 and August 2018. The survey segmented respondents by their confidence levels regarding cooking abilities, confidence in their kitchen design abilities, and their comfort level with using technology in the kitchen.
     
    “This exclusive research is somewhat of a departure from our traditional studies, which typically analyze product categories, design trends, size of the market and business projections,” said Bill Darcy, NKBA CEO. “It’s the first time we are looking at how changes in consumer lifestyle impact the actual use of our industry’s product and services. The data provides valuable insight for designers, remodelers, dealers, showroom associates and other professionals in how they serve their clients. This commitment to research and analysis reinforces NKBA’s thought leadership in the marketplace, and offers strategic information for the benefit of our membership.”
     
    The report provides data on family dining, meal preparation, entertaining and other activities occur in the kitchen (paying bills, homework, and more). Also reported is how homeowners use technology in the space and what storage needs they require. Furthermore, the study offers a correlation between these elements and design, the need for professionals in the process, how and where consumers shop for and buy kitchen products, and more.
     
    The full Lifestyle Segmentation Report is available for purchase at the NKBA store. For more information, click on NKBA-Lifestyle-Segmentation-Report or NKBA-Lifestyle-Segmentation-Executive-Summary.
     
     The National Kitchen & Bath Association (NKBA) is the not-for-profit trade association that owns the Kitchen & Bath Industry Show® (KBIS), as part of Design & Construction Week (DCW). With nearly 14,000 member companies representing tens of thousands of members in all segments of the kitchen and bath industry, the NKBA has educated and led the industry since the association’s founding in 1963. The NKBA envisions a world where everyone enjoys safe, beautiful and functional kitchen and bath spaces. The mission of the NKBA is to inspire, lead and empower the kitchen and bath industry through the creations of certifications, marketplaces and networks. For more information, visit www.NKBA.org  

Sloyd

Sloyd (Slöjd), also known as Educational sloyd, is a system of handicraft-based education started by Uno Cygnaeus in Finland in 1865. The system was further refined and promoted worldwide, and was taught in the United States until the early 20th Century. It is still taught as a compulsory subject in Finnish, Danish, Swedish and Norwegian schools.

The word "sloyd" is derived from the Swedish word Slöjd, which translates as crafts, handicraft, or handiwork. It refers primarily to woodwork but also paper-folding and sewing, embroidery, knitting and crochet.

Otto Salomon, with the financial support of his uncle, started a school for teachers in Nääs (now a part of the Swedish municipality of Lerum) in the 1870s.[1] The school attracted students from throughout the world and was active until around 1960.

Video: Woodworking Projects