Free Furniture Blueprints | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities along with a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, himself is also an instructor and a member of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they are following because most of the thoughts and projects Ted’s resource are easy to understand and easy. Ted McGrath spent two years researching so he could collect enough material for an extensive bundle, and he ended up making a truly’complete’ woodworking source.

Many might still appear unsure if they should be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it more difficult to make the ideal choice. There are in fact lots of things that set Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to profit out of Ted’s woodworking Package. Those that are just getting started will find the ideas and jobs in Ted’s package quite simple. No doubt, intricate carpentry is demanded; however, they will find it really simple to follow Ted’s simple step-by-step instructions. Presently, both beginner and seasoned ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who purchase his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource which helps beginners learn a lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers are going to have the ability to find any job of their choice within this package quite readily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who buy it’ll be backed by a 60-day guarantee, so if this woodworking package fails to satisfy them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down because of its large size. Nonetheless, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

As there are several ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nevertheless, they didn’t mind being overwhelmed considering how this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast that it contains just about every woodworking project a woodworker might be considering building.

This woodworking bundle created by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that can be found throughout the internet. Ted has done his very best to direct them in every possible way he could, through simple to comprehend textual directions, clear pictures and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking jobs they will find inside. So, it is definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more innovative hand tools and much more woodworking power tools here, but the concept is to purchase the crucial hand and power tools that novices will need. You can always add to your arsenal as you get experience!

Free Furniture Blueprints Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you’ve purchased your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to finish your project. However, if you are unsure about what to do there is help available! There are several areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of those several woodworking magazines available. Each month the authors in woodworking magazines do a story on how best to improve your woodworking craft. Whether it is showing you the way you can apply an end to a completed job, or how to create a mortise and tenon joint, something new could be learned every month. Next, is purchasing instructional DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Free Furniture Blueprints

If you’re a beginner and very enthusiastic about doing a DIY project for home then, woodworking could be interesting. If you do not have the right information, instruction, and skill, you may wind up spending more money and time than you originally meant to spend. As a beginner woodworker, you want to have space, time and the appropriate tools. Having said, there are a couple of essential aspects that you need to keep in mind, before starting with any woodworking project.

1. If you’re just beginning, you must first need to be very interested in woodworking. Making something new with your hands is a special feeling. Do not begin a job if you’re not interested, as this may land you at a bad place.

2. Consider the main reason for making this woodworking project. Choose the uses of the item you’re making.

3. Consider your skills and analyze the time that you have, before you begin with a project.

4. Start projects that you’re able to finish. If you’re in the midst of a work, then it is better not to start any project in any way.

Finding Woodworking Projects and Plans for Beginners Free Furniture Blueprints

If you keep those vital things in mind before you begin a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires planning as much as it requires effort. So how do you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to choose the woodworking projects that you wish to start with. As a beginner, always pick a project which has quite a basic construct up or a very simple structure. Some easy to start projects comprise, bird feeder, benches, shelves, etc.. As soon as you get hold of the techniques, you can always move into the next level of woodworking jobs, like cabinets, sheds, along with others. Beginning jobs should always keyword be complicated and less frustrating so you have a better knowledge of working with woods and their resources. When the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Free Furniture Blueprints

Tools would be the means whereby you can win the struggle of woodworking. Many men and women believe power tools are needs. But for beginners, basic hand tools can be very handy and more than helpful in completing a job. If woodworking is your hobby, then some tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and measurements. The workbench, when fixed with vises, provide ample space to operate. As a primary tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make things much easy for you. When you purchase a hammer, always check the equilibrium between the weight and endure. Always select a sturdy, yet lightweight product.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool helps you to cut forests at several sizes. There are various sorts of saws available in the market. Decide on a size which you can handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them will help you ahead of time woodworking. You can even buy keyword energy screwdrivers since they make the job much quicker.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape gives you the capacity to measure wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you require a wrench. Nonetheless, this is not a tool for beginners, but having it would make work simpler for you in a subsequent stage.

7. Drill – Drill makes it possible to create holes in timber. Power drills are more useful but they cost more. Low wattage power drills will make the job much simple.

8. Additional small and fundamental tools – These include pens, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s not any fixed cost on woodworking projects. Dependent on the sort of job that you would like to complete, pricing could be set. The easy the project, the less price it involves. But at the beginning purchasing the tools will be somewhat hefty. Because of this, it is much better to fix a budget first on the tools, then keyword on the project. Buying the fundamental tools will ensure that you do not need to buy any more material other than the timber ply.

Time and Instructions

Instructions are one of the primary things which each and every beginner should follow. It is like the woodworking Bible. Instructions manual is quite simple to understand the procedure, what to do and the way to do it. It keyword is a systematic guide for finishing the job. Time also plays a significant part in the construction of woodworking jobs. Woodworking projects require time and therefore it’s necessary for a novice to have ample amount of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that will make the work easy. But the most indispensable thing keyword which will help you to reach success is proper preparation. With proper planning and a strategy, it is possible to achieve success quickly. If you know the objective of woodworking, the thing that you want to build, the tools you need to own and the typical time you can give daily; then you are ready to go.

Conclusion, Free Furniture Blueprints

All these tips and instruction will make the woodworking projects and plans for beginners quickly to finish. Always ensure that you have all the vital tools, materials, area prepared. Keep the instructions for constructing a product handy. Proper strategy and planning will allow you to make a fantastic woodworking job for your home.

|

How to Become a Master Woodworker From Your Own Home Free Furniture Blueprints

Folks if you’re trying to find a way to pass time or desire an alternative method to generate money they usually turn to a hobby they enjoy. Woodworking is one of those hobbies individuals turn to do as a hobby or home based company. It is very exciting to do and anyone can get started.

When doing woodworking at home there are a lot of jobs one can consider. When starting out you have to be quite cautious when choosing which job to start out with since you will find projects which may be too difficult for a beginner. But don’t worry about that because we are going to provide you guidelines on the ideal way to start woodworking as a newcomer.

The same as any other hobby woodworking requires some working gear, therefore before you choose your project you have to be aware of if you have the available resources to work on that job. Try not to spend a lot of money on buying gear when starting out, purchase more gear as you get more experience and become a professional carpenter. If you enjoy your hobby then there will be no difference between the artistic hand as well as the normal hands.

The Benefits of Woodworking Free Furniture Blueprints

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking in your home will provide you time to research different projects and find out a lot of things. That’s why it’s important to spend less money when starting out so that you can manage to make errors and at some time learning about different jobs.
It is very important you know more about the different types of wood available for creating jobs. Expect carpenters utilize different kinds of wood quality for decorating pieces, learning which type of wood they use will help you prepare the wood you will need for certain projects you might want to pursue.
As soon as you know the basics of wood choice and the usage of different tools now you can employ them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in creating good jobs to fulfill your wants.

Free Furniture Blueprints practice makes perfect so be sure you practice your work daily if at all possible. Try out lots of designs using various tools so that you can get the hang of working with the tools. When starting out you may make a number of mistakes but with time you will find out how to correctly use them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Free Furniture Blueprints

Woodworking as a hobby may be among the most rewarding experiences you’ll ever appreciate. You may begin on a shoestring with a minimal number of gear and equipment. A little home workshop can generate a broad array of simple projects which will allow you to develop your creative and building abilities while rewarding you with practical and artistic wood products that you can appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let’s talk about where you will do your woodworking, based on the size of your house, you may be able to create a dedicated space into your woodworking activities. This might be a reserved spot in your garage or on your cellar. In some cases, a detached shed or outbuilding may be perfect to set up your very first store. A heated store detached from your home offers one distinct advantage: better pest management. Without complex dust control systems, basement assignments will inevitably produce dust that travels to the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns found in the basement draw dust up into the upper levels of the house. Another benefit of detached workshops is, of course, the sound level. You can work without disturbing the rest of the family. A good compromise could be the garage of your home.

This might help minimize the problems of dust and noise, however depending on where you live, a keyword garage layout might not be sensible during extremes of hot or cold weather.

Finding Woodworking Projects and Plans for Beginners Free Furniture Blueprints

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they include more space to work in. Free Furniture Blueprints if you can have a dedicated place for a workshop all the greater. Floor gear and bench top gear can stay in position from project to project. If this setup is not impossible, at least attempt to make a chair area where equipment could be saved and pulled out as needed. If possible plan for inevitable expansion as you get more tools and equipment. In the beginning, set up a seat area where you are able to store and use the majority of your gear, using a temporary expansion of your actions onto the basement or garage floor.

A basic workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. Add a sturdy shelf below the seat to house your hands power tools and a pegboard above the bench to hang additional gear. Install a woodworking vice at one end of the bench on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Free Furniture Blueprints

The scope of your start-up equipment will be mostly based on your budget. Whether you’ve got large financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, then purchase your quality tools at your regional building and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or other local advertisements. There are plenty of quality gently used tools out there which belong to people who stumbled on that 1 molding project around the house or received tools as gifts which they will never use. You can usually purchase tools for all these sellers for less than half of the initial price and save even more money if you make a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will require additional time and possibly travel expenses. Weigh the advantages of traveling across town to save a few extra bucks on a cheap piece of equipment. The excess expense of travel and time in these situations is usually justified when buying large ticket items such as table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimum quantity of hand equipment yet generated sophisticated and complex pieces. Concentrate on developing your skills with your startup set of tools and prevent lamenting about the gear you wished you had.
Here is a listing of the more useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Buy a quality acrylic set that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually impair your vision and affect safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together if you find them uneasy.

The next piece of crucial safety gear you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking can be long-term and noisy exposure to those sound levels can affect hearing and lead to tinnitus and other hearing losses. I prefer a very simple ball cap along with my ear muffs and eye protection. I am keeping the dust from my hair. I’m good to go!

Power Hand Saw: Often referred to as a skill saw after the popular name, this can end up being the most versatile instrument in a start-up workshop. In fact, in the hands of a professional, a power hand saw could be used to build an whole house. At some point, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a funding empowers him to perform cross cuts, rip cuts and even intricate angle cuts. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your second project. After choosing the proper saw put in an excellent blade. Most skill saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade for a backup and put in an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument can’t just cut corners. It is perfect for cutting holes in wood also like manage slots. At some point, you’ll want to obtain a band saw. Bandsaws are even more versatile but a quality floor unit can be expensive. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss within the conventional 3/8 inch version. Through hard lessons learned, I have discovered that buying quality, in this scenario, is more critical than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their long-term battery life will be bad and to make things worse keyless chucks come loose and slip often. This is 1 annoyance you do not need on your workshop. Purchase an range of quality carbide tipped drill bits which are kept in a holder labeling each drill bit size. Create a habit of returning each drill bit to its prospective slot in the holder after each use. Lastly, get a pair of tough steel driver bits. Your drill may also be a flexible screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer stays as the most flexible tool in the shop, and often the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop accidents occur. Although the most frequent, hammer injuries are usually of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and features a comfortable handle. Most hammers in the high tech range offer ceramic or metal handles. Cheaper hammers usually have wood grips with inferior joints between the head and handle. The head usually comes loose and the tool becomes useless. Select a title brand quality hammer at the 16-ounce range for overall work and a smaller finishing hammer for more intricate work. Avoid using large framing hammers at the workshop and some other with dimpled head tips. These types of hammers are more appropriate for rough framing tasks and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can handle just about any trimming requirements that you have as a novice woodworker. As your woodworking abilities evolve, you’ll probably update to a floor version disk and belt sander. However, for now, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface space. As you embark on your first few projects you’ll find that your palm sander with a bit of effort can transform rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough planks with 100 grit paper and after finish your job with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets with an excess source of 100 grit paper. You’ll get this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Although low tech in concept, these tools enable you to taper edges, sew high stains and fix any imperfections in timber pieces. {Start with a typical amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold off your wood pieces as you work on them. Unfortunately, superior clamps are expensive and it usually takes the novice woodworker a couple of years to accumulate a comprehensive set of timber clamps. Begin with a set of extended”pipe” clamps. Now the pipe was replaced with extended steel shafts, however, the structure remains the same. Get a pair of the maximum clamps that you could spend. You can get in touch with them for smaller adhesive jobs and enlarge them to their entire length for larger jobs.

Shop Vice: A store vice installed in the end of the seat is perfect for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices with their wood clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enable the consumer to rapidly open and close the limbs without tedious handle turning. The timber clamping surfaces in your vice will occasionally require replacement. I prefer to utilize soft walnut in my vices which will not crush or damage lots of the various forests that I utilize. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be one of the most often used tools. Buy a fantastic quality name brand tape measure with a wide tape usually from the 25-foot range. Although in your shop you might not be using the tape at these lengths, the bigger tape steps provide more rigid tapes that won’t flop around and slip off the end of planks. Measuring when you’re on your own will be a great deal easier, and naturally, quality tape steps can last for many years.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the timber. Avoid oversize carpenter’s pencils. Their big flat leads are simply too coarse for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools will assist you in marking the right angles as well as chemical angles. Get the number two and three Robertson set. I discover the Robertson format works great for many woodworking projects and will be the most compatible with a drill powered bits. Last, get a pair of 12-inch wood documents. The cost of adhesive through all your jobs is a little cost consideration. Therefore, it makes sense to go with the best. I also have found over time that I get the best results with both indoor and outdoor projects once I use quality outdoor grade adhesive. These resin-based compounds unlike traditional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Free Furniture Blueprints

The peaceful gratification of woodworking is an excellent adventure in this era of rushed lives, smartphones, and time-starved careers. With a minimal investment in the most rudimentary tools and equipment, everyone can learn the rewarding abilities of his time-tested avocation and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Sweet Home 3D

Sweet Home 3D is a free architectural design software application that helps users create a 2D plan of a house, with a 3D preview, and decorate exterior and interior view including ability to place furniture and home appliance. In Sweet Home 3D, furniture can be imported and arranged to create a virtual environment. It can also be used for designing blueprints of houses.

Video: Woodworking Projects