Free Online Carpentry Classes | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and a few of those qualities along with a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, she’s also an instructor and a part of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking whenever they are following because most of the ideas and jobs Ted’s resource are simple to comprehend and easy. Ted McGrath spent two years researching so he could collect enough material for an extensive package, and he ended up making a truly’complete’ woodworking resource.

Many might still appear unsure whether they need to be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it more difficult to make the right option. There are actually many things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit from Ted’s woodworking Package. Those who are only getting started will find the ideas and jobs in Ted’s package quite easy. No doubt, intricate carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s simple step-by-step directions. Currently, both novice and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a lot about woodworking. They will also have the ability to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers will be able to find any project of their choice within this bundle quite readily, though there numerous choices.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and people who purchase it’ll be backed by a 60-day warranty, so if this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large dimensions. Nonetheless, using a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overrun considering the fact that this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design bundle is so comprehensive and vast it contains pretty much every woodworking project a woodworker may be interested in building.

This woodworking package created by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking bundles that are available across the internet. Ted has done his very best to guide them in every possible way he could, through easy to comprehend textual directions, clear pictures and even movies as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking jobs they will find within. So, it is certainly worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Free Online Carpentry Classes

Woodworking is one hobby that can also be a rewarding career if you love to work together with your hands and construct beautiful pieces of furniture from timber. When you learn that the woodworking crafts and eventually become a fine woodworking craftsman, you’ll be able to build all types of furniture, (beds, table, and chairs), with ease. After that you can sell your finished woodworking jobs and make a handsome profit. Free Online Carpentry Classes.

It takes time to become proficient in the craft of woodworking. The nice thing about working up to that expert craftsman degree is you will have the ability to build some really nice furniture for you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit in your living room. It will be a subject of conversation whenever you have friends come over to visit. They will ask: How can you create it? Where did you get the woodworking programs? Just how long can it take to finish the project? What kind of tools did you use? Just how on earth did you create such a gorgeous piece of furniture? As you speak about your job, a feeling of pride will come over you and don’t be surprised if your friends ask you to create one for them too!

Starting Your First Woodworking Shop Free Online Carpentry Classes

If you’re thinking you are too old or too young for woodworking, then think again! You are never too old or too young for such a fun hobby and it’s perfect for beginners!

Where to begin in Woodworking? Free Online Carpentry Classes.

Begin with a concept in your mind of what you want to build then get a excellent woodworking project plan that is geared toward novices. There are numerous small woodworking projects for beginners available for sale from online woodworking retailers. A few woodworking plan suggestions for you thinking are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child just to name a couple. Obviously, you can begin with as grand a woodworking program as you pick. On the other hand, the chances are if you start out with a small woodworking project at first, you will get a better prospect of keyword completing the project.

Your woodworking project plan should include some lists! Lists of: woodworking hardware, the quantity and type of wood needed, and the required hand tools and power tools to complete the undertaking. Note: A word of caution about purchasing woodworking tools. Only buy what you want to complete your immediate or upcoming project. This is important especially if you’re a beginner and just starting out. Tools are not affordable. The beginner needs good woodworking gear, but you can easily break the bank purchasing a great deal of tools you may not utilize all that often. When you do buy tools, buy quality. Do a little research and compare products. Buy the best that you could afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also do not overlook the wood glue and a brush to spread the wood adhesive! Obviously, you will require a dry place to work and may require a set of horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of substance and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more innovative hand tools and more woodworking power tools , but the concept is to purchase the essential hand and power tools which beginners will need. You can always add to your arsenal as you gain experience!

Free Online Carpentry Classes Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. But if you are not certain about what to do there is help available! There are several places that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of those several woodworking magazines out there. Each month the authors in woodworking publications do a story about how best to increase your woodworking craft. When it’s showing you how to apply a finish to a finished project, or how to make a mortise and tenon joint, something new can be heard every month. Next, is purchasing instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to work with a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Free Online Carpentry Classes

If you are a beginner and very interested in doing a DIY job for home afterward, woodworking can be fun. If you do not have the proper information, education, and skill, you might land up spending more time and money than you initially meant to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having mentioned, there are a few essential factors you need to keep in mind, before starting with any woodworking project.

1. If you are just beginning, you should first have to be somewhat interested in woodworking. Making something new with your hands is a particular feeling. Don’t begin a job if you’re not interested, as this may land you at a terrible place.

2. Think of the primary reason behind creating this woodworking project. Choose the uses of this item you’re making.

3. Consider your skills and examine the time that you have, until you begin with a job.

4. Start projects which you’re able to finish. If you are in the middle of some work, then it is better not to start any project at all.

How to Become a Master Woodworker From Your Own Home Free Online Carpentry Classes

If you keep these vital points in your mind before beginning a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires planning as much as it takes effort. So how do you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to opt for the woodworking projects that you wish to begin with. As a beginner, always select a project that has quite a basic build up or a very simple construction. Some simple to start projects include, bird feeder, chairs, shelves, etc.. The moment you get hold of the techniques, you could always proceed to the next level of woodworking jobs, like cabinets, sheds, and others. Beginning jobs should keyword be less complicated and less bothersome so you have a better knowledge of working with forests and their tools. Once the job is selected, start selecting your tools.

Beginners Woodworking Tools, Free Online Carpentry Classes

Tools are the means whereby you can win the battle of woodworking. A lot of men and women believe power tools are requires. But for novices, basic hand tools can be very convenient and more than helpful in completing a job. If woodworking is the hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is needed for precise cuts and measurements. The workbench, when fixed with vises, offer ample space to work. As a key tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters considerably simple for you. When you buy a hammer, always assess the balance between the weight and stand. Always select a hardy, yet lightweight item.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are various sorts of saws out there in the market. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Possessing all of them will help you in advance woodworking. You might even buy keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you demand a wrench. Nonetheless, this is not a tool for beginners, but having it might make work simpler for you at a later stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more helpful but they cost more. Low wattage power drills can make the job much simple.

8. Additional small and fundamental tools – These include pencils, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s no fixed price on woodworking projects. Based on the type of job that you want to complete, pricing could be determined. The easy the project, the less cost it involves. But at the very beginning purchasing the tools will probably be somewhat hefty. Because of this, it’s much better to resolve a budget first on the resources, then keyword on the project. Purchasing the fundamental tools will make certain you don’t have to buy any more material aside from the timber ply.

Time and Instructions

Directions are one of the principal things which each and every beginner should follow. Instructions manual is quite easy to comprehend the procedure, what to do and the way to get it done. Time also plays an important part in the building of woodworking projects. Woodworking projects demand time and so it’s crucial for a beginner to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or tricks that would make the work easy. But the most essential thing keyword that will allow you to reach success is proper planning. With appropriate planning and a strategy, it’s possible to achieve success immediately. If you know the purpose of woodworking, the thing you need to construct, the tools you require to possess and the average time you can devote daily; then you’re all set to go.

Conclusion, Free Online Carpentry Classes

These strategies and instruction is likely to make the woodworking projects and plans for novices fast to finish. Always ensure you have all the essential tools, materials, area ready. Keep the instructions for constructing a product handy. Appropriate strategy and preparation will allow you to make a great woodworking job for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Free Online Carpentry Classes

Folks when looking for a way to pass time or desire an alternative way to make money they generally turn to a hobby they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based company. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you have to be quite cautious when choosing which job to begin with since you will find jobs that can be too difficult for a beginner. But don’t be concerned about that since we are going to give you tips on the ideal way to start woodworking as a newcomer.

The same as any other hobby woodworking requires some working gear, therefore before you choose your project you need to be aware of if you’ve got the available resources to work on such a project. Try not to invest a good deal of cash on purchasing gear when starting out, purchase more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any difference between the artistic hand and the normal hands.

The Benefits of Woodworking Free Online Carpentry Classes

Woodworking at home will provide you time to explore different projects and learn a lot of things. That is why it’s very important to spend less money when starting out so that you can afford to make mistakes and at any time learning about various jobs.
It is very important that you know about different kinds of wood available for making projects. Anticipate carpenters use several types of wood quality for decorating pieces, learning what type of wood that they use will help you prepare the wood you will need for certain projects you may want to pursue.
Once you understand the fundamentals of wood choice and the use of different tools you can now employ them in cutting well wood pieces and putting wood together. Knowing what to do can help you in building good projects to fulfill your needs.

Free Online Carpentry Classes practice makes perfect so make sure you practice your work every day if possible. Try out a lot of designs using various tools so that you may find the hang of using the tools. When starting out you may make a number of mistakes but with time you will learn how to correctly use them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Free Online Carpentry Classes

Woodworking as a hobby can be among the most rewarding experiences you will ever appreciate. You may get started on a shoestring with a minimum amount of gear and equipment. A small home workshop may generate a broad array of simple projects that can allow you to develop your creative and building abilities while rewarding you with artistic and practical wood products which you are able to enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let’s talk about where you’ll perform your woodworking, Depending on the size of your house, you may have the ability to create a dedicated space into your woodworking tasks. This might be a reserved spot on your garage or in your cellar. In some cases, a detached shed or outbuilding might be ideal to set up your first store. A heated shop detached from your house offers one distinct advantage: better pest management. Without complex dust control systems, basement assignments will inevitably create dust which travels to the living area of your house. This is very true in homes with forced air heating systems where cold air yields located in the cellar draw dust up into the top levels of the house. Another benefit of detached workshops would be, clearly, the noise level. It’s possible to work without bothering the remainder of the household. A fantastic compromise could be the garage of your property.

This might help minimize the difficulties of dust and sound, however depending on where you live, a keyword garage workshop might not be practical during extremes of cold or hot weather.

How to Become a Master Woodworker From Your Own Home Free Online Carpentry Classes

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes they include more space to function in. Free Online Carpentry Classes if you can have a dedicated place for a workshop all the greater. Floor tools and bench top gear can stay in position from project to project. If this installation is not impossible, at least try to create a bench area where equipment could be stored and pulled out as needed. If possible plan for inevitable expansion as you acquire more tools and equipment. In the start, set up a bench area where you can shop and use most of your gear, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. Add a sturdy shelf beneath the bench to home your hands power tools and a pegboard over the bench to hang additional gear. Put in a woodworking at one end of the bench on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Free Online Carpentry Classes

The scope of your startup equipment will be largely based on your budget. Whether you’ve got big financial resources or you are starting on a shoestring consistently purchase quality equipment. If you can afford it, purchase your quality tools at your local construction and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or alternative local ads. You will find an abundance of quality gently used tools out there that belong to individuals who embarked on that one molding job around the home or obtained tools as gifts which they will never utilize. You can usually purchase tools for all these sellers for under half the original cost and save even more money if you create a package deal for all their unused equipment. Of course, acquiring tools from private people will take extra time and possibly travel expenditures. Weigh the advantages of traveling around town to save a few extra bucks on a cheap piece of gear. The excess cost of travel and time in these scenarios is usually justified when buying large ticket items such as table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a visit to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimal amount of hand gear yet generated sophisticated and intricate bits. Focus on developing your skills with your start-up set of resources and avoid lamenting about the gear you wished you had.
Here’s a listing of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses which also offer you some side protection for your eyes. Purchase a quality acrylic collection that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually impair your vision and influence safety. Avoid wearing gloves at a workshop. Most impair vision and dust up quickly. You may avoid wearing them all together in the event that you find them uneasy.

The next bit of critical safety gear you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. With this set up I am protecting my eyes and my ears. I am keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw following the popular brand name, this may prove to be the most flexible tool in a startup workshop. In fact, in the hands of a professional, a power hand saw could be used to construct an whole house. At some point, you are going to want to buy a table saw, but for now, a power hand saw for the woodworker on a funding enables him to perform cross cuts, tear cuts and even intricate angle cuts. As mentioned before get an excellent brand saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your next job. After choosing the right saw put in a quality blade. Most saws come with a starter blade of lesser quality even if they’re a good saw. Keep this blade for a backup and put in an excellent blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will include excellent flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool can’t just cut corners. It is perfect for cutting holes in wood too like manage slots. At some point, you’re going to want to obtain a ring saw. Bandsaws are much more versatile but a excellent floor unit can be costly. A jigsaw can be a fantastic stop gap for the novice woodworker.

Buy an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the standard 3/8 inch version. Down the road, the 1/2 inch version will prove to be versatile. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is much more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged often. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you do not need on your workshop. Purchase an assortment of superior carbide tipped drill bits that are kept in a holder labeling each drill bit size. Create a habit of returning every drill bit to its prospective slot at the holder after each use. Last, get a pair of tough steel driver bits. Your drill may also be a versatile screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer stays as the most flexible tool in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop injuries occur. Although the most frequent, hammer injuries are often of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and features a comfortable handle. Many hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The mind usually comes loose and the instrument becomes useless. Select a name brand quality hammer at the 16-ounce scope for overall work and a smaller completing hammer for more complex work. Avoid using big framing hammers at the workshop and any with dimpled head tips. These types of hammers are more suited for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can manage pretty much any trimming requirements that you’ve got as a beginner woodworker. As your woodworking skills evolve, you’ll probably upgrade to a floor model disc and belt sander. However, for now, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you might discover that your palm sander using just a little bit of effort can transform rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and form rough boards using 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an range of sandpaper sheets using an extra supply of 100 grit paper. You’ll get that this grade of paper that the most versatile in your shop.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Although low tech in theory, these tools allow you to taper edges, flatten high spots and correct any imperfections in timber bits. {Start with a typical amount 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood bits as you operate on them. Unfortunately, superior clamps are costly and it usually takes the novice woodworker a few years to collect a comprehensive set of timber clamps. Begin with a pair of long”pipe” clamps. Now the pipe has been replaced with long steel shafts, but the structure is still the same. Get a set of the maximum clamps that you can afford. You may contact them for smaller glue jobs and enlarge them to their entire length for bigger projects.

Shop Vice: A shop vice installed in the end of the bench is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces can securely hold wood bits without marring or damaging them. A number of the greater vices offer rapid release mechanisms that enabled the consumer to rapidly open and close the limbs without tedious handle turning. The timber beamed surfaces on your vice will occasionally need replacement. I prefer to utilize soft walnut in my vices that will not crush or damage lots of the various woods that I work with. Whether I’m working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be one of your most often used tools. Buy a fantastic excellent name brand tape measure with a broad tape usually from the 25-foot selection. Although in your shop you might not use the tape at these spans, the larger tape steps provide more rigid tapes that will not flop around and slide off the ending of boards. Assessing when you are by yourself will be a lot simpler, and of course, quality tape steps can endure for many decades.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need additional sanding. Avoid oversized carpenter’s pencils. Their large flat leads are just too rough for accurate measurement in the workshop.

Other Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools can help you in marking the right angles in addition to compound angles. Also, get an range of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I discover that the Robertson format works best for many woodworking projects and is the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood documents. The expense of adhesive through all of your jobs is a minor cost consideration. Therefore, it makes sense to go with the best. I also have found over the years that I receive the best results with both indoor and outdoor jobs once I use quality outdoor grade glue. These resin-based compounds unlike traditional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Free Online Carpentry Classes

The peaceful gratification of woodworking is a wonderful experience in this day and age of hurried lives, smart phones, and time-starved livelihood. With a minimum investment in the most basic equipment and tools, anyone can learn the profitable abilities of his time-tested avocation and revel in job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Carpentry

Carpentry is a skilled trade and a craft in which the primary work performed is the cutting, shaping and installation of building materials during the construction of buildings, ships, timber bridges, concrete formwork, etc. Carpenters traditionally worked with natural wood and did the rougher work such as framing, but today many other materials are also used[1] and sometimes the finer trades of cabinetmaking and furniture building are considered carpentry. In the United States, 98.5% of carpenters are male, and it was the fourth most male-dominated occupation in the country in 1999. In 2006 in the United States, there were about 1.5 million carpentry positions. Carpenters are usually the first tradesmen on a job and the last to leave.[2] Carpenters normally framed post-and-beam buildings until the end of the 19th century; now this old fashioned carpentry is called timber framing. Carpenters learn this trade by being employed through an apprenticeship training—normally 4 years—and qualify by successfully completing that country's competence test in places such as the United Kingdom, the United States, Australia and South Africa. It is also common that the skill can be learned by gaining work experience other than a formal training program, which may be the case in many places.

The word "carpenter" is the English rendering of the Old French word carpentier (later, charpentier) which is derived from the Latin carpentarius [artifex], "(maker) of a carriage.[3] The Middle English and Scots word (in the sense of "builder") was wright (from the Old English wryhta, cognate with work), which could be used in compound forms such as wheelwright or boatwright.[4]

In the UK, carpentry is more correctly used to describe the skill involved in first fixing of timber items, such as construction of roofs, floors and timber framed buildings, i.e., those areas of construction that are normally hidden in a finished building. An easy way to envisage this is that first fix work is all that is done before plastering takes place. Second fix is done after plastering takes place. Second fix work, the construction of items such as skirting boards, architraves, and doors also comes under carpentry. Carpentry is also used to construct the formwork into which concrete is poured during the building of structures such as roads and highway overpasses. In the UK, the skill of making timber formwork for poured, or in situ, concrete, is referred to as shuttering.

Video: Woodworking Projects