Free Online Carpentry Courses | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and some of those attributes along with a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, she’s also an instructor and a member of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking when they’re following because most of the ideas and jobs Ted’s resource are simple to understand and easy. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive package, and he ended up creating a truly’complete’ woodworking resource.

Many may still appear unsure if they should be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more difficult to make the right option. There are in fact lots of things that place Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to profit from Ted’s woodworking Package. People who are only getting started will discover the thoughts and projects in Ted’s bundle quite simple. Without doubt, intricate carpentry is involved; however, they will find it really simple to follow Ted’s simple step by step directions. Presently, both beginner and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which will help beginners learn a whole lot about woodworking. They will also have the ability to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 simple woodworking ideas and woodworking projects. Woodworkers are going to be able to find any project of their choice in this bundle quite readily, even though there so many options.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who purchase it will be backed by a 60-day guarantee, so when this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large dimensions. Nonetheless, using a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overwhelmed considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design package is so comprehensive and vast it contains just about every woodworking project a woodworker might be considering building.

This woodworking bundle created by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking packages that can be found throughout the net. Ted has done his very best to guide them in every conceivable way he can, through easy to understand textual directions, clear pictures and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking projects they will find within. So, it’s certainly worth buying!

Starting Your First Woodworking Shop Free Online Carpentry Courses

Woodworking is one hobby that could also be a rewarding profession if you love to work with your hands and construct beautiful pieces of furniture from timber. When you learn the woodworking crafts and become a fine woodworking craftsman, you will have the ability to construct all kinds of furniture, (table, beds, and chairs), effortlessly. After that you can sell your finished woodworking jobs and make a handsome profit. Free Online Carpentry Courses.

It requires time to become proficient in the craft of woodworking. The nice thing about working up to this expert craftsman level is you will be able to build some really nice furniture for you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit in your living space. It’ll be a subject of conversation when you have friends come over to see. They’ll ask: How did you create it? Just how long did it take to complete the project? What kind of tools did you use? How on earth did you create such a beautiful item of furniture? As you speak about your job, a sense of pride will encounter you and don’t be surprised if your friends ask you to make one for them too!

Finding Woodworking Projects and Plans for Beginners Free Online Carpentry Courses

If you are thinking you are too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to begin in Woodworking? Free Online Carpentry Courses.

Start with a concept in mind of what you want to build then get a excellent woodworking project plan that is geared toward beginners. There are numerous small woodworking projects for novices available for sale from online woodworking merchants. A couple of woodworking plan suggestions to get you believing really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid simply to mention a few. Of course, you can start out with as expansive a woodworking plan as you pick. However, the chances are if you begin using a small woodworking job at first, you will have a better prospect of keyword finishing the project.

Your woodworking project plan must incorporate some lists! Lists of: woodworking equipment, the quantity and variety of wood needed, and the essential hand tools and power tools to finish the project. Note: A word of caution about purchasing woodworking tools. Just buy what you need to complete your instant or upcoming endeavor. This is important especially if you’re a beginner and just beginning. Tools aren’t affordable. The beginner needs good woodworking tools, but you can easily break the bank purchasing a lot of tools you may not use all that often. When you do buy gear, buy quality. Do a little research and compare products. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, finish punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking clamps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and do not overlook the wood glue and a brush to spread the wood adhesive! Of course, you’ll require a dry place to work and may need a pair of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of substance and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more woodworking hand tools and more woodworking power tools , but the concept is to buy the crucial hand and power tools which novices will need. You may always add to your arsenal as you gain experience!

Free Online Carpentry Courses Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you have bought your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to finish your project. However, if you’re not certain about what to do there is help available! There are lots of places that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of those several woodworking magazines available. Every month the authors in woodworking publications do a story about the best way to improve your woodworking craft. When it is showing you how you can apply a finish to a finished project, or how to make a mortise and tenon joint, something new could be heard every month. Next, is buying educational DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to work with a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Free Online Carpentry Courses

If you are a beginner and very enthusiastic about doing a DIY project for home then, woodworking could be fun. If you do not have the right information, education, and ability, you may wind up spending more money and time than you originally meant to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having said, there are a couple of essential factors that you should remember, before starting with any woodworking project.

1. If you are just beginning, you must first have to be very interested in woodworking. Creating something new with your hands is a particular feeling. Don’t begin a project if you are not interested, as this may land you at a bad location.

2. Consider the main reason behind making this woodworking project. Decide on the uses of this item you’re making.

3. Consider your skills and analyze the time you have, until you start with a project.

4. Start projects that you’re able to complete. If you are in the midst of some work, then it is better not to start any project at all.

Starting Your First Woodworking Shop Free Online Carpentry Courses

If you maintain these essential points in your mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires preparation as much because it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to choose the woodworking projects that you want to start with. As a beginner, always pick a job that has a very basic build up or a very simple structure. Some simple to start projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find the techniques, you can always proceed into the next level of woodworking jobs, such as cupboards, sheds, along with others. Beginning jobs should always keyword be less complicated and less bothersome so you have a better comprehension of working with forests and their tools. Once the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Free Online Carpentry Courses

Tools would be the ways whereby you will win the battle of woodworking. Many men and women think that power tools are requires. However, for novices, basic hand tools can be quite convenient and more than helpful in completing a job. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is needed for exact cuts and dimensions. The workbench, when mended with vises, offer ample space to work. As a key tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer will make things considerably easy for you. When you purchase a hammer, always assess the balance between the weight and endure. Always pick a hardy, yet lightweight item.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool can help you to cut woods at different sizes. There are various sorts of saws available on the market. Choose a size which you could deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them can help you in advance woodworking. You might even purchase keyword power screwdrivers as they make the job much quicker.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape helps you to quantify wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you require a wrench. However, this is not a tool for novices, but using it would make work simpler for you at a later stage.

7. Drill – Drill makes it possible to create holes in timber. Power drills are more helpful but they cost more. Low wattage power drills will make the job much easy.

8. Additional small and basic tools – These include pens, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s no fixed cost on woodworking projects. Based on the type of job that you want to complete, pricing could be set. The easy the job, the less cost it involves. But at the beginning purchasing the tools will probably be somewhat hefty. Because of this, it is much better to resolve a budget on the resources, then keyword on the undertaking. Buying the basic tools will make certain you don’t need to buy any more material aside from the timber ply.

Time and Instructions

Instructions are among the principal things which every newcomer should follow. It is like the woodworking Bible. Instructions guide is quite simple to understand the process, what to do and how to do it. It keyword is a systematic guide for finishing the project. Time also plays an important part in the construction of woodworking projects. Woodworking projects require time and therefore it’s crucial for a novice to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. But the most essential thing keyword which can allow you to reach success is proper planning. With proper planning and a plan, it’s possible to achieve success quickly. If you know the purpose of woodworking, the item you want to construct, the resources you require in order to own and the average time it’s possible to give every day; then you are ready to go.

Conclusion, Free Online Carpentry Courses

These strategies and instruction is likely to create the woodworking projects and strategies for beginners fast to finish. Always make sure that you have all the vital tools, materials, space prepared. Read the instructions for constructing an item handy. Proper strategy and planning will allow you to make a great woodworking job for your home.

|

Finding Woodworking Projects and Plans for Beginners Free Online Carpentry Courses

People if you’re trying to find a way to pass time or want an alternative way to make money they generally turn to a hobby they enjoy. Woodworking is one of those hobbies individuals turn to perform as a hobby or home based business. It’s very exciting to do and everyone can begin.

When doing woodworking in your home there are lots of jobs one can think of. When starting out you need to be quite careful when choosing which job to start out with since you will find projects that can be too tough for a beginner. But don’t be concerned about that because we will give you tips on the ideal way to start woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, so before you pick your project you need to be aware of if you have the available resources to work on such a project. Try not to invest a good deal of cash on buying equipment when starting out, buy more equipment as you get more experience and become an expert carpenter. Should you enjoy your hobby then there will be no gap between the artistic hand and the hands.

The Benefits of Woodworking Free Online Carpentry Courses

Woodworking at home will give you time to explore different projects and find out so many things. That’s why it’s very important to spend less money when starting out so you can manage to make mistakes and at any time learning about different projects.
It’s very important you know more about different kinds of wood available for making projects. Anticipate carpenters utilize several types of wood quality for decorating pieces, learning which type of wood that they use can allow you to prepare the wood you will need for certain projects you might want to pursue.
As soon as you know the basics of wood selection and the usage of different tools now you can employ them in cutting out well wood pieces and putting wood together. Knowing what to do can help you in building good jobs to fulfill your needs.

Free Online Carpentry Courses practice makes perfect so be sure that you practice your work daily if possible. Try out a lot of layouts utilizing a variety of tools so that you can get the hang of using the tools. When starting out you can make a number of errors but with time you will find out how to correctly use them and create quality projects.

|

The Benefits of Woodworking Free Online Carpentry Courses

Woodworking as a hobby can be one of the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimal amount of tools and equipment. A small home workshop can generate a wide array of simple projects which can allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products that you can appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let us discuss where you will perform your woodworking, Depending on the dimensions of your home, you might be able to produce a dedicated space to your woodworking activities. This may be a reserved spot in your garage or on your cellar. Sometimes, a detached shed or outbuilding might be perfect to prepare your very first store. A heated shop detached from your home offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably create dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems where cold air yields found in the cellar draw up dust into the top levels of the house. Another advantage of detached workshops would be, clearly, the noise level. You can work without bothering the remainder of the household. A fantastic compromise could be the garage of your property.

This can help decrease the problems of dust and sound, however depending on where you live, a keyword garage workshop may not be sensible during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Free Online Carpentry Courses

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes they add more space to work in. Free Online Carpentry Courses if you can have a dedicated place for a marathon all the better. Floor tools and bench top gear can remain in place from project to project. If this installation isn’t impossible, at least attempt to create a bench area where equipment could be stored and pulled out as needed. If at all possible plan for inevitable growth as you get more tools and gear. At the start, set up a bench area where you can shop and use the majority of your gear, using a temporary expansion of your actions onto the basement or garage floor.

A basic workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. This will enable you to work comfortably while standing. Add a sturdy shelf beneath the seat to home your hand power tools along with a pegboard over the seat to hang additional gear. Put in a woodworking at one end of your seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Free Online Carpentry Courses

The reach of your start-up equipment will be mostly based on your budget. Whether you’ve got large financial resources or you are starting on a shoestring consistently purchase quality equipment. If you can afford it, then buy your quality tools in your local construction and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or other local ads. You will find an abundance of quality gently used tools out there that belong to people who stumbled on that one molding project around the house or obtained tools as presents which they won’t ever use. You can usually purchase tools for these sellers for under half the original price and save even more money if you make a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will require additional time and possibly travel expenditures. Weigh out the advantages of traveling across town to save a couple added dollars on a cheap piece of equipment. The extra cost of time and travel in these scenarios is usually justified when buying large ticket items such as table saws, bandsaws or large ended tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal quantity of hand equipment yet generated sophisticated and intricate pieces. Concentrate on developing your abilities with your start-up set of resources and avoid lamenting about the equipment you wished you had.
Here is a listing of the useful tools you’ll need to get started:
Safety Equipment: Start as expected by eye protection. Get a nice pair of safety glasses which also offer you some side protection for your eyes. Purchase a quality acrylic set that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually hamper your vision and affect security. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You may avoid wearing all of them together if you find them uncomfortable.

The next bit of crucial safety equipment that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to those sound levels may affect hearing and lead to tinnitus and other hearing losses. I am keeping the dust from my hair. I’m all set!

Power Hand Saw: Frequently known as a skill saw after the popular brand name, this can prove to be the most flexible instrument in a startup workshop. In fact, in the hands of an expert, a power hand saw could be employed to build an entire house. As mentioned earlier get a quality manufacturer saw. Avoid cheap unknown brands. These are inclined to cut back and will burn out before you even start your second project. After choosing the proper saw put in an excellent blade. Most skill saws come with a starter blade of lower quality even if they are a fantastic saw. Keep this blade for a copy and put in a quality blade with carbide teeth. Begin with a hybrid . All these possess a balanced tooth count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument cannot just cut corners. It is ideal for cutting holes in wood too like manage slots. At some point, you’re going to want to get a band saw. Bandsaws are even more flexible but a excellent floor unit can be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Buy an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss over the standard 3/8 inch model. Down the street, the 1/2 inch version will prove to be more versatile. Through hard lessons learned, I have found that buying quality, in this scenario, is much more crucial than ever. Cheaper drills have a tendency to have very short run times and need to be recharged frequently. Their battery life tends to be bad and to make matters worse keyless chucks come loose and slip frequently. This is 1 annoyance you don’t need on your workshop. Buy an range of superior carbide tipped drill bits which are kept in a holder labeling each drill bit size. Make a habit of returning every drill bit to its prospective slot in the holder after each use. Lastly, get a pair of tough steel driver bits. Your drill can also be a versatile screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer remains as the most flexible instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop injuries occur. Even though the most ordinary, hammer injuries are usually of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and features a comfortable grip. Most hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers usually have wood handles with poor joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Select a title brand quality hammer in the 16-ounce range for general work and a smaller completing hammer for more intricate work. Avoid using big framing hammers in the workshop and any with dimpled mind tips. These kinds of hammers are more appropriate to rough framing jobs and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can handle just about any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you’ll likely update to a floor version disk and belt sander. But for now, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on the first few projects you might find that your palm sander using just a little bit of effort can transform rough looking creations into virtual works of art! It is possible to use your palm sander to sand and shape rough planks using 100 grit paper and later finish your work with 200 or 300 grit paper. Buy an assortment of sandpaper sheets using an excess supply of 100 grit paper. You’ll get that this grade of paper that the most versatile in your store.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Though low tech in theory, these tools allow you to taper borders, flatten high spots and fix any imperfections in timber bits. {Begin with a typical amount 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold off your wood pieces as you work on them. Unfortunately, superior clamps are expensive and it usually requires the novice woodworker a couple of years to collect a comprehensive set of wood clamps. Begin with a pair of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, but the structure remains the same. Receive a set of the maximum clamps that you can spend. You can contact them for smaller glue jobs and expand them to their full length for larger projects.

Shop Vice: A store vice installed at the end of your seat is ideal for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices using their timber clamping surfaces can securely hold wood bits without marring or damaging them. A number of the better vices offer you quick release mechanisms that enable the user to quickly open and close the limbs with no dull handle turning. The timber beamed surfaces in your vice will occasionally need replacement. I prefer to utilize soft pine in my vices that will not crush or damage lots of the different forests that I work with. Whether I am working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be among the most often used tools. Purchase a good excellent name brand tape measure with a broad tape usually from the 25-foot range. Even though in your shop you may not use the tape at these spans, the bigger tape measures provide more rigid tapes which won’t flop around and slide off the end of planks. Assessing when you’re by yourself will be a great deal simpler, and of course, quality tape measures can last for several years.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber.

What is Woodworking? How to Become a Master Woodworker From Your Own Home Free Online Carpentry Courses

Woodworking is known as the construction or the creation of objects from wood. It is possible to create a lot of different items from woodworking and these objects can be as big as gazebos or as small as wooden toys. However large or small your private project maybe you will be quite likely to do that goal with woodworking. In addition, woodworking has many private as well as emotional benefits! In the following guide, I am going to briefly identify some of the benefits for you.

Woodworking as a Career:

A good deal of individuals who love to use their hands have turned that love into a career through woodworking. Individuals who build things from wood are generally known keyword as carpenters. Carpenters can operate on a number of woodworking jobs and occupation types. For instance, a few carpenters possess their carpentry business and these folks have the luxury to set their job hours. This benefit allows carpenters the opportunity to spend more time with their families and also have less job strain. Raising kids is a very difficult task regardless of what way you approach the endeavor! For a carpenter who possesses their own company, this job might not be as hard since that person will have more time to become part of her or his child’s lifetime. By playing a larger role in the life span of your child you will be having a larger impact on the type of character that child develops into, which is a massive concern for any loving parent. Besides such advantages, carpentry may also have health benefits too.

Starting Your First Woodworking Shop Free Online Carpentry Courses

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood round a whole lot. This causes more physical activity, which results in better physical health. Maintaining your body physically healthy is vital and keyword will help prevent the incidence of various illnesses later on in life. By being physically healthy you can reduce chances you will have a heart attack, have seizures, turned into a diabetic, and reduce the odds of having a range of other disorders.

Free Online Carpentry Courses, Do It Yourself Woodworking Saves Money:

I feel like that I paid way too much when I visit home improvement shops and buy patio furniture, and I am certain that I am not the only person who has felt like this! A successful small business owner once told me to always raise the sales price of a commodity to double everything you obtained it for. This way, you always have the option to reduce the merchandise to 50 percent off and still come out without getting any losses. This seems like it might be the exact same tactic that home improvement stores use in selling their own wooden furniture solutions. Regardless, there is a way that it is possible to get around paying the extra cash and that has to do with building it yourself. Luckily, there are several really excellent woodworking products that offer thousands of comprehensive woodworking keyword strategies for countless different project types. Thus, you can really build anything you need or see in almost any home improvement store. Doing something yourself does take a little bit of time but time is well spent when you wind up saving hundreds of dollars because of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Education

Education is the process of facilitating learning, or the acquisition of knowledge, skills, values, beliefs, and habits. Educational methods include storytelling, discussion, teaching, training, and directed research. Education frequently takes place under the guidance of educators and also learners may also educate themselves.[1] Education can take place in formal or informal settings and any experience that has a formative effect on the way one thinks, feels, or acts may be considered educational. The methodology of teaching is called pedagogy.

Etymologically, the word "education" is derived from the Latin word ēducātiō ("A breeding, a bringing up, a rearing") from ēducō ("I educate, I train") which is related to the homonym ēdūcō ("I lead forth, I take out; I raise up, I erect") from ē- ("from, out of") and dūcō ("I lead, I conduct").[3]

Education began in prehistory, as adults trained the young in the knowledge and skills deemed necessary in their society. In pre-literate societies, this was achieved orally and through imitation. Story-telling passed knowledge, values, and skills from one generation to the next. As cultures began to extend their knowledge beyond skills that could be readily learned through imitation, formal education developed. Schools existed in Egypt at the time of the Middle Kingdom.[4]

Video: Woodworking Projects