Free Outdoor Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The package has various qualities which make it the”#1 woodworking Resource” and a few of those attributes alongside a few petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, she’s also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they’re after because most of the ideas and jobs Ted’s source are simple to comprehend and easy. Ted McGrath spent two years researching so that he could collect enough material for an extensive package, and he ended up creating a really’complete’ woodworking source.

Many might still appear unsure if they need to be buying Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it more difficult to make the right option. There are actually lots of things that set Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit out of Ted’s woodworking Package. People that are only getting started will discover the ideas and projects in Ted’s package quite simple. No doubt, intricate carpentry is involved; nonetheless, they will find it really simple to follow Ted’s easy step by step instructions. Currently, both beginner and experienced ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which helps beginners learn a whole lot about woodworking. They will also be able to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will have the ability to find any project of their choice in this bundle quite easily, though there numerous options.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and people who buy it’ll be backed by a 60-day warranty, so when this woodworking bundle fails to meet them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long time to down because of its large size. Nonetheless, with a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans in Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overwhelmed considering how this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking package is so comprehensive and vast that it contains just about every woodworking project a woodworker may be interested in constructing.

This woodworking bundle created by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking packages that are available across the net. Ted has done his very best to direct them in every possible way he could, through easy to understand textual instructions, clear pictures and even movies too.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking jobs they will find inside. Therefore, it’s certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more woodworking hand tools and more woodworking power tools here, but the concept is to purchase the crucial hand and power tools which novices will need. You can always increase your arsenal as you gain experience!

Free Outdoor Woodworking Plans Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you’ve purchased your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to complete your project. But if you are unsure about what to do there is help available! There are lots of areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of the many woodworking magazines out there. Each month the writers in woodworking publications do a story about how to improve your woodworking craft. Whether it is showing you the way to apply a finish to a completed job, or how to create a mortise and tenon joint, something new could be heard every month. Next, is buying educational DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Free Outdoor Woodworking Plans

If you’re a beginner and very enthusiastic about doing a DIY project for house afterward, woodworking could be interesting. If you don’t have the proper information, instruction, and ability, you might wind up spending more time and money than you originally intended to spend. As a novice woodworker, you want to have time and the correct tools. Having said, there are a few essential aspects you should remember, before starting with any woodworking project.

1. If you’re a beginner, you should first need to be very interested in woodworking. Creating something new with your hands is a particular feeling. Do not begin a job if you’re not interested, as this may land you at a terrible place.

2. Consider the primary reason behind making this woodworking project. Decide on the uses of the item you are making.

3. Consider your abilities and examine the time you have, before you begin with a job.

4. Start projects that you can finish. If you are in the midst of some work, then it is wise not to start any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Free Outdoor Woodworking Plans

If you maintain those essential points in mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much as it takes effort. So how can you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking projects you wish to begin with. As a newcomer, always pick a project which has a very basic build up or a very simple structure. Some simple to start projects comprise, bird feeder, benches, shelves, etc.. The moment you find these techniques, you can always proceed into the next level of woodworking projects, such as cupboards, sheds, along with others. Beginning jobs should keyword be less complicated and less frustrating so you have a better comprehension of working with woods and their resources. When the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Free Outdoor Woodworking Plans

Tools are the means through which you can win the battle of woodworking. Many people think that power tools are needs. But for novices, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and dimensions. The workbench, when mended with vises, provide ample space to work. As a key tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make things considerably simple for you. When you purchase a hammer, constantly check the equilibrium between the weight and stand. Always pick a hardy, yet lightweight product.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are different types of saws available on the market. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them can help you ahead of time woodworking. You might even purchase keyword power screwdrivers since they make the job much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you demand a wrench. However, this isn’t a tool for novices, but having it would make work easier for you at a later stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the job much easy.

8. Other small and basic tools – These include pens, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed price on woodworking jobs. Based on the type of project you want to finish, pricing can be determined. The simple the project, the less cost it involves. However, at the beginning buying the tools will be a little hefty. Because of this, it is much better to fix a budget on the resources, then keyword on the undertaking. Purchasing the basic tools will make certain you don’t need to buy any more material aside from the timber ply.

Time and Directions

Directions are among the primary things which each and every newcomer should follow. It’s like the woodworking Bible. Instructions manual is very easy to comprehend the procedure, what to do and how to get it done. Time also plays a significant part in the construction of woodworking projects. Woodworking projects demand time and so it’s necessary for a novice to have ample quantity of time weekly.

Tips and Tricks for Beginners

There are no quick tips or tricks that would make the work easy. But the most essential thing keyword that can allow you to achieve success is proper preparation. With proper planning and a plan, it’s possible to achieve success immediately. If you understand the objective of woodworking, then the thing you need to construct, the tools you need to own and the typical time you can devote every day; then you are all set to go.

Conclusion, Free Outdoor Woodworking Plans

All these tips and instruction is likely to make the woodworking projects and plans for beginners fast to finish. Always make sure you have all of the vital tools, materials, space prepared. Read the instructions for constructing a product handy. Appropriate strategy and planning will help you to earn a great woodworking project for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Free Outdoor Woodworking Plans

Folks when looking for a way to pass time or desire an alternative way to generate money they usually turn to a hobby they enjoy. It’s very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you need to be very careful when choosing which project to start out with since there are jobs that can be too difficult for a newbie. But don’t worry about that because we will give you tips on the ideal way to begin woodworking as a beginner.

Just like any other hobby woodworking requires some working equipment, so before you choose your job you need to know whether you’ve got the available tools to work on that project. Try not to invest a good deal of cash on purchasing equipment when starting out, purchase more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no difference between the artistic hand as well as the hands.

How to Become a Master Woodworker From Your Own Home Free Outdoor Woodworking Plans

To keep yourself updated you must disseminate with various brands tools and woods. Woodworking at home will provide you time to research different jobs and learn a lot of things. That’s why it’s very important to invest less money when starting out so that you can manage to make errors and at some time learning about various jobs.
It is extremely important that you know about different types of wood available for creating projects. Anticipate carpenters use several kinds of wood quality for decorating pieces, learning what type of wood they use will allow you to prepare the wood you will need for certain jobs you might choose to pursue.
As soon as you know the basics of wood selection and the use of different tools now you can employ them in cutting well wood pieces and putting wood together. Knowing what to do will assist you in building good projects to satisfy your needs.

Free Outdoor Woodworking Plans practice makes perfect so make sure you practice your work every day if possible. Try out lots of layouts using a variety of tools so that you may get the hang of using the tools. When starting out you can earn a range of mistakes but with time you will learn how to correctly utilize them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Free Outdoor Woodworking Plans

Woodworking as a hobby may be one of the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimum number of gear and equipment. A little home workshop can produce a wide variety of simple projects which can help you develop your creative and building abilities while rewarding you with artistic and practical wood products which you can appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let us discuss where you’ll do your woodworking, Depending on the size of your home, you may have the ability to produce a dedicated space to your woodworking tasks. This may be a reserved place on your garage or in your basement. Sometimes, a detached shed or outbuilding might be ideal to prepare your first shop. A heated store detached from your home offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably produce dust that travels to the living area of your house. This is particularly true in homes with forced air heating systems where cold air returns located in the cellar draw up dust into the top levels of the home. Another advantage of detached workshops is, of course, the noise level. It’s possible to work without disturbing the remainder of the household. A good compromise might be the garage of your property.

This might help decrease the problems of dust and sound, however depending on where you reside, a keyword garage layout might not be practical during extremes of hot or cold weather.

The Benefits of Woodworking Free Outdoor Woodworking Plans

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes they add more space to function in. Free Outdoor Woodworking Plans if you’re able to have a dedicated spot for a workshop all the better. Floor tools and bench top gear can remain in position from project to project. If this setup isn’t hopeless, at least try to make a chair area where equipment can be saved and pulled out as necessary. If possible plan for inevitable expansion as you get more tools and equipment. At the start, establish a bench area where you can shop and use most of your equipment, using a temporary expansion of your activities onto the garage or basement floor.

A basic workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. This will enable you to work comfortably while standing. Insert a sturdy shelf below the seat to house your hand power tools and a pegboard over the seat to hang other equipment. Put in a woodworking vice at one end of your bench on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Free Outdoor Woodworking Plans

The reach of your start-up equipment will be largely based on your financial plan. Whether you’ve got large financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, purchase your quality tools at your regional building and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or alternative local ads. There are plenty of quality gently used tools out there that belong to people who stumbled on that one molding job around the home or received tools as presents that they will never utilize. You can usually purchase tools for all these sellers for under half of the original price and save even more money if you make a bundle deal for all their unused equipment. Of course, getting tools from private people will take additional time and possibly travel expenses. Weigh out the advantages of traveling around town to save a couple extra dollars on a inexpensive piece of gear. The extra expense of time and travel in these situations is usually justified when buying large ticket items such as table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a visit to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimal quantity of hand equipment yet produced sophisticated and complex bits. Focus on developing your abilities with your startup set of tools and avoid lamenting about the gear you wished you had.
Here is a listing of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses which also offer some side protection for your eyes. Buy a quality oil collection that will be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually hamper your vision and influence safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You can avoid wearing them all together if you find them uncomfortable.

The next bit of critical safety equipment you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking can be long-term and noisy exposure to these noise levels can affect hearing and lead to tinnitus and other hearing losses. With this setup I’m protecting my eyes and my ears. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Often referred to as a skill saw after the favorite brand name, this can prove to be the most versatile instrument in a startup workshop. In fact, at the hands of a professional, a power hand saw could be employed to construct an entire house. At some point, you are going to want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned before get an excellent manufacturer saw. Avoid cheap unknown brands. All these tend to cut back and will burn out before you even start your second project. After choosing the proper saw put in a quality blade. Most saws come with a starter blade of lesser quality even if they’re a good saw. Keep this blade as a backup and put in an excellent blade with carbide teeth. Start with a hybrid . All these possess a balanced enamel count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool cannot only cut corners. It’s ideal for cutting holes in wood too like handle slots. At some point, you’re going to want to get a ring saw. Bandsaws are much more versatile but a excellent floor unit can be costly. A jigsaw can be a fantastic stop gap for the novice woodworker.

Purchase an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss over the conventional 3/8 inch model. Down the road, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have found that purchasing quality, in this case, is much more crucial than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their battery life tends to be poor and to make things worse keyless chucks come loose and slip often. This is one annoyance you do not need in your workshop. Buy an assortment of quality carbide tipped drill bits that are kept in a holder tagging each drill bit size. Create a habit of returning every drill piece to its potential slot in the holder after every use. Lastly, get a pair of tough steel driver bits. Your drill may also be a versatile screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer remains as the most versatile instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop accidents happen. Even though the most ordinary, hammer accidents are usually of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and comes with a comfortable grip. Many hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood grips with poor joints between the head and handle. The head typically comes loose and the tool becomes useless. Pick a name brand quality hammer at the 16-ounce scope for general work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers at the workshop and any with dimpled head tips. These kinds of hammers are more suited to rough framing jobs and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can handle pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking abilities evolve, you will probably update to a floor version disc and belt sander. However, for now, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited amounts of surface space. As you embark on the first few projects you might find that your palm sander with a little bit of effort can change rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and form rough boards with 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an range of sandpaper sheets with an excess source of 100 grit paper. You’ll find that this grade of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Although low tech in theory, these tools allow you to taper borders, sew high stains and correct any imperfections in timber bits. {Begin with a typical amount 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold down your wood pieces as you operate on them. Unfortunately, good clamps are costly and it usually requires the beginner woodworker a couple of years to collect a comprehensive set of timber clamps. Start with a pair of long”pipe” clamps. Now the pipe has been replaced with long steel shafts, however, the structure is still the same. Get a pair of the maximum clamps which you could afford. You can contact them for smaller glue jobs and expand them to their full length for larger jobs.

Shop Vice: A shop vice installed at the end of the bench is perfect for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices with their timber clamping surfaces may securely hold wood bits without marring or damaging them. A number of the better vices offer rapid release mechanisms that enabled the consumer to quickly open and close the limbs with no tedious handle rotation. The wood clamping surfaces in your vice will periodically need replacement. I would rather utilize soft pine in my vices that will not crush or damage lots of the various woods that I work with. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be one of your most frequently used tools. Purchase a fantastic excellent name brand tape measure with a broad tape usually from the 25-foot range. Although in your store you may not be using the tape in these spans, the bigger tape measures provide more rigid tapes that will not flop around and slide off the ending of boards. Measuring when you’re on your own will be a great deal simpler, and of course, quality tape steps can last for many decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need extra sanding. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for precise measurement in the workshop.

Other Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools will assist you in marking the right angles as well as compound angles. Get the number two and three Robertson set. I find that the Robertson format works best for many woodworking jobs and will be the most compatible with a drill powered pieces. Last, get a set of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them ideal for rough shaping and fixing small mistakes on the way.

Adhesives: Not all glues are created equal. Avoid cheap home brands marketed as carpenter’s glue. The expense of glue through all of your jobs is a minor cost consideration. Therefore, it makes sense to decide on the best. I have also found over the years that I receive the best results with both indoor and outdoor jobs when I use quality outside grade adhesive. These resin-based compounds unlike traditional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Free Outdoor Woodworking Plans

The peaceful satisfaction of woodworking is an excellent experience in this era of rushed lives, smart phones, and time-starved livelihood. With a minimum investment in the most basic tools and equipment, anyone can learn the profitable abilities of his time-tested avocation and enjoy job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Gamble House (Pasadena, California)

The Gamble House, also known as the David B. Gamble House, is an iconic American Craftsman home in Pasadena, California, designed by the architectural firm Greene and Greene. Constructed in 1908–09 as a home for David B. Gamble of the Procter & Gamble company, it is today a National Historic Landmark, California Historical Landmark, and museum.

Originally intended as a winter residence for David and Mary Gamble, the three-story Gamble House is commonly described as America's Arts and Crafts masterpiece.[citation needed] Its style shows influence from traditional Japanese aesthetics and a certain California spaciousness born of available land and a permissive climate. The Arts and Crafts Movement in American Craftsman style architecture was focused on the use of natural materials, attention to detail, aesthetics, and craftsmanship.

The house is located on a grassy knoll on a Pasadena Arroyo. Because of the Gambles’ attraction to the environment, Greene designed the house to complement the rustic setting. The house's design reflected the Gambles' love of nature as flowers and trees were brought to the interior—creating pictures in wood, metal, art glass, and semi-precious stone. The building itself appears as if growing from the landscape, achieved by a blend of man-made and natural materials such as vines covering the house from the ground up.

Video: Woodworking Tools