Free Patterns For Wood Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and some of those attributes along with a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking whenever they’re following because most of the thoughts and jobs Ted’s source are easy to comprehend and easy. Ted McGrath spent two years exploring so he could gather enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many may still appear unsure whether they need to be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more challenging to make the ideal option. There are actually many things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit from Ted’s woodworking Package. People who are just getting started will discover the ideas and projects in Ted’s package quite easy. No doubt, complicated carpentry is involved; nonetheless, they will discover that it’s really simple to follow Ted’s simple step by step instructions. Presently, both beginner and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who purchase his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which will help beginners learn a lot about woodworking. They will also be able to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 easy woodworking ideas and woodworking projects. Woodworkers are going to have the ability to locate any project of their choice within this bundle quite readily, though there so many options.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who buy it will be endorsed by a 60-day warranty, so if this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long time to down due to its large dimensions. Yet, with a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

As there are several ideas, projects and plans at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overrun considering the fact that this package is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design bundle is so comprehensive and vast that it contains just about every woodworking project a woodworker might be interested in constructing.

This woodworking package created by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that are available throughout the net. Ted has done his best to direct them in every possible way he could, through easy to understand textual instructions, clear pictures and even movies as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking jobs they will find within. So, it is certainly worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Free Patterns For Wood Projects

Woodworking is one hobby that could also be a rewarding profession if you like to work together with your hands and build exquisite pieces of furniture from timber. When you learn the woodworking crafts and become a nice woodworking craftsman, you’ll have the ability to build all kinds of furniture, (table, beds, and chairs), effortlessly. You can then sell your completed woodworking projects and make a handsome profit. Free Patterns For Wood Projects.

It takes time to become skilled in the craft of woodworking. The wonderful thing about working up to that expert craftsman level is you will be able to create some really nice furniture to you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit on your living room. It will be a subject of conversation whenever you have friends come over to visit. They will ask: How can you create it? Just how long did it take to complete the job? What kind of wood did you use? What kind of tools did you use? Just how on earth did you create such a gorgeous item of furniture? As you speak about your work, a sense of pride will come over you and also do not be surprised if your friends ask you to create one for them too!

Finding Woodworking Projects and Plans for Beginners Free Patterns For Wood Projects

If you are thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such an enjoyable hobby and it’s perfect for beginners!

Where to Begin in Woodworking? Free Patterns For Wood Projects.

Start with a concept in your mind of what you want to construct then get a excellent woodworking project plan that’s geared toward novices. There are several small woodworking projects for novices available for sale from online woodworking merchants. Of course, you can begin with as expansive a woodworking program as you choose. On the other hand, the odds are if you begin using a small woodworking project initially, you’ll have a better chance of keyword completing the job.

Your woodworking project plan should incorporate some lists! Length of: woodworking equipment, the quantity and type of wood required, and the essential hand tools and power tools to finish the undertaking. Note: A word of warning about purchasing woodworking tools. Only buy what you need to finish your instant or upcoming project. This is important especially if you are a beginner and just beginning. Tools are not cheap. The beginner needs good woodworking tools, but you can easily break the bank purchasing a great deal of tools you may not use all that frequently. If you do buy tools, buy quality. Do a little research and compare products. Buy the best that you can afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, finish punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking clamps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and don’t forget the wood glue and a brush to spread the wood glue! Of course, you’ll require a dry place to work and might need a pair of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more woodworking hand tools and more woodworking power tools , but the concept is to purchase the essential hand and power tools that beginners will need. You can always increase your arsenal as you gain experience!

Free Patterns For Wood Projects Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you’ve bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to finish your project. However, if you are unsure about what to do there is help available! There are lots of places that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Each month the writers in woodworking magazines do a story about the best way to improve your woodworking craft. When it is showing you the way to apply an end to a completed job, or how to create a mortise and tenon joint, something new can be learned each month. Next, is purchasing educational DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to work with a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Starting Your First Woodworking Shop Free Patterns For Wood Projects

If you are a beginner and very interested in doing a DIY job for house then, woodworking can be fun. If you do not have the right information, education, and skill, you might wind up spending more time and money than you initially intended to spend. As a novice woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a couple of essential aspects you need to remember, before beginning with any woodworking project.

1. If you’re a beginner, you should first have to be very interested in woodworking. Creating something new with your own hands is a special sense. Do not start a project if you are not interested, as this may land you at a bad location.

2. Consider the primary reason for making this woodworking project. Choose the uses of this item you are making.

3. Consider your abilities and examine the time that you have, before you start with a job.

4. Start jobs that you can complete. If you’re in the midst of a work, then it’s wise not to start any project at all.

How to Become a Master Woodworker From Your Own Home Free Patterns For Wood Projects

If you maintain these vital things in mind before you begin a woodworking project, it will become very simple for you to achieve success. Woodwork requires planning as much as it takes effort. So how do you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking jobs you want to start with. As a beginner, always select a job that has a very basic construct up or a very simple structure. Some simple to start projects comprise, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you can always proceed into the next level of woodworking projects, such as cabinets, sheds, and others. Beginning jobs should keyword be complicated and less frustrating so you have a better comprehension of working with forests and their tools. Once the job is selected, start selecting your tools.

Beginners Woodworking Tools, Free Patterns For Wood Projects

Tools are the ways whereby you can win the struggle of woodworking. A lot of people think that power tools are needs. However, for beginners, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is your hobby, then some tools that you would demand are:

1. Workbench – A workbench is required for precise cuts and dimensions. The workbench, when mended with vises, offer ample space to operate. As a primary tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make matters much simple for you. When you purchase a hammer, constantly assess the balance between the weight and endure. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool helps you to cut forests at different sizes. There are various sorts of saws out there on the marketplace. Decide on a size which you could deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Possessing all of them will help you ahead of time woodworking. You might also purchase keyword power screwdrivers since they make the job much quicker.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you require a wrench. However, this isn’t a tool for beginners, but using it would make work easier for you at a subsequent stage.

7. Drill – Drill helps you create holes in timber. Power drills are more useful but they cost more. Low wattage power drills can make the job much simple.

8. Additional small and basic tools – These include pencils, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is not any fixed price on woodworking jobs. Based on the sort of project that you want to finish, pricing can be set. The easy the job, the less cost it involves. But at the very beginning purchasing the tools will be a little hefty. Because of this, it’s much better to fix a budget on the tools, then keyword on the undertaking. Purchasing the basic tools will make certain you don’t have to buy any more material other than the timber ply.

Time and Instructions

Directions are among the primary things which each and every newcomer should follow. Instructions guide is very simple to comprehend the procedure, what to do and the way to do it. It keyword is a systematic guide for finishing the project. Time also plays an important part in the construction of woodworking jobs. Woodworking projects demand time and so it is crucial for a beginner to have ample amount of time every week.

Tips and Tricks for Beginners

There are no quick tips or suggestions that would make the work easy. But the most indispensable thing keyword that can help you to achieve success is proper preparation. With appropriate planning and a plan, it is possible to achieve success quickly. If you understand the objective of woodworking, then the item you want to build, the resources you need to possess and the typical time it’s possible to devote daily; then you’re ready to go.

Conclusion, Free Patterns For Wood Projects

All these strategies and instruction will create the woodworking projects and strategies for beginners fast to complete. Always ensure you have all the vital tools, materials, area prepared. Read the instructions for constructing an item handy. Proper strategy and planning can help you to make a great woodworking project for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Free Patterns For Wood Projects

People when looking for a way to pass time or desire an alternate method to generate money they usually turn into a hobby that they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are lots of projects one can think of. When starting out you have to be very careful when choosing which project to start out with since there are projects that can be too tough for a newbie. But don’t be concerned about that because we are going to give you tips on the ideal means to begin woodworking as a newcomer.

The same as any other hobby woodworking demands some working gear, therefore before you choose your job you need to be aware of if you’ve got the available resources to work on such a job. Try not to invest a lot of cash on purchasing gear when starting out, buy more equipment as you get more experience and become an expert carpenter. Should you enjoy your hobby then there’ll be no difference between the hand and the hands.

How to Become a Master Woodworker From Your Own Home Free Patterns For Wood Projects

Woodworking at home will give you time to explore different projects and find out a lot of things. That’s why it’s very important to invest less money when starting out so you can manage to make mistakes and at some time learning about various jobs.
It is very important you know more about different kinds of wood available for creating projects. Expect carpenters use different kinds of wood quality for decorating pieces, learning what kind of wood they use can allow you to prepare the wood you will need for certain jobs you may want to pursue.
As soon as you understand the fundamentals of wood choice and the usage of different tools now you can implement them in cutting out well wood pieces and putting wood together. Knowing what to do can help you in creating good projects to fulfill your wants.

Free Patterns For Wood Projects practice makes perfect so be sure you practice your work every day if possible. Try out a lot of layouts using various tools so you can get the hang of using the tools. When starting out you may make a range of mistakes but with time you will find out how to properly utilize them and produce quality projects.

|

Starting Your First Woodworking Shop Free Patterns For Wood Projects

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You may get started on a shoestring with a minimum number of tools and equipment. A little home workshop may generate a broad variety of simple projects which can help you develop your creative and construction abilities while rewarding you with artistic and practical wood products that you can appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let us talk about where you will perform your woodworking, Depending on the size of your home, you may have the ability to create a dedicated space into your woodworking activities. This may be a reserved spot in your garage or on your cellar. In some cases, a detached shed or outbuilding may be perfect to set up your first store. A heated store detached from your home provides one distinct advantage: better dust control. Without sophisticated dust control systems, basement assignments will inevitably create dust that travels to the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns located in the basement draw dust up into the top levels of the house. Another benefit of detached workshops would be, of course, the noise level. It’s possible to work without disturbing the rest of the family. A fantastic compromise could be the garage of your property.

This can help decrease the difficulties of dust and sound, however depending on where you live, a keyword garage workshop may not be practical during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Free Patterns For Wood Projects

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes they add more space to function in. Free Patterns For Wood Projects if you’re able to have a dedicated place for a marathon all the greater. Floor tools and bench top gear can stay in place from project to project. If this setup isn’t hopeless, at least try to create a bench area where equipment could be saved and pulled out as necessary. If possible plan for inevitable growth as you get more tools and gear. At the start, set up a bench area where you are able to shop and use the majority of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. Insert a sturdy shelf beneath the bench to house your hand power tools along with a pegboard over the seat to hang other gear. Put in a woodworking vice at one end of your seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Free Patterns For Wood Projects

The reach of your startup equipment will be mostly based on your financial plan. Whether you have got big financial resources or you are starting on a shoestring consistently buy quality equipment. If you can afford it, then buy your quality tools in your local building and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other local advertisements. There are plenty of quality gently used programs out there which belong to individuals who stumbled on that one molding job around the home or obtained tools as presents which they will never use. You can usually purchase tools for these sellers for less than half of the initial cost and save even more money should you create a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will require additional time and possibly travel expenses. Weigh out the advantages of traveling across town to save a few added dollars on a cheap piece of equipment. The excess expense of time and travel in these scenarios is usually justified when purchasing large ticket items like table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a visit to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimum quantity of hand equipment yet generated sophisticated and complex bits. Concentrate on developing your abilities with your start-up set of tools and prevent lamenting about the gear you wished you had.
Here is a checklist of the useful tools You Will Need to get started:
Safety Gear: Start as anticipated by eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Purchase a quality oil collection that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually hamper your vision and influence security. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You may avoid wearing them all together in the event that you find them uncomfortable.

The next piece of crucial safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking can be noisy and long-term exposure to those sound levels may affect hearing and lead to tinnitus and other hearing losses. With this set up I’m protecting my eyes and my ears. I am keeping the dust from my hair. I’m good to go!

Power Hand Saw: Frequently known as a skill saw after the popular brand name, this can end up being the most versatile tool in a start-up workshop. In reality, at the hands of an expert, a power hand saw could be used to build an entire property. Eventually, you are going to want to buy a table saw, but for now, a power hand saw for the woodworker on a funding empowers him to do cross cuts, rip cuts and even intricate angle cuts. As mentioned before get a quality manufacturer saw. Stay away from cheap unknown brands. These are inclined to cut inaccurately and will burn out before you start your second project. After selecting the proper saw put in a quality blade. Most saws come with a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will include excellent versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool cannot only cut corners. It is ideal for cutting holes in timber also like handle slots. At some point, you’ll want to obtain a ring saw. Bandsaws are much more flexible but a quality floor unit can be costly. A jigsaw may be a good stop gap to the novice woodworker.

Purchase an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the standard 3/8 inch model. Down the street, the 1/2 inch version will end up being more versatile. Through hard lessons learned, I have discovered that buying quality, in this scenario, is more crucial than ever. Cheaper drills tend to have very short run times and have to be recharged often. Their long-term battery life will be bad and to make things worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t need in your workshop. Buy an assortment of superior carbide tipped drill bits which are kept in a holder labeling each drill bit size. Create a habit of returning each drill piece to its prospective slot in the holder after every use. Lastly, get a pair of hard steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop injuries happen. Although the most frequent, hammer injuries are often of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and features a comfortable grip. Most hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood handles with poor joints between the head and handle. The mind usually comes loose and the instrument becomes useless. Pick a title brand quality hammer in the 16-ounce scope for overall work and a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and any with dimpled mind tips. These types of hammers are more suited for rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can handle just about any sanding requirements you have as a beginner woodworker. As your woodworking skills evolve, you’ll probably update to a floor model disk and belt sander. But for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited amounts of surface area. As you embark on the first few projects you might discover that your palm sander using a little bit of effort can change rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and shape rough planks with 100 grit paper and after finish your job with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets with an excess source of 100 grit paper. You’ll find that this caliber of paper the most versatile on your store.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Though low tech in theory, these tools enable you to taper borders, sew high stains and correct any imperfections in wood bits. {Begin with a standard amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold down your wood pieces as you work on them. Unfortunately, good clamps are expensive and it usually takes the novice woodworker a couple of years to accumulate a detailed set of wood clamps. Begin with a set of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, however, the structure is still the same. Get a set of the longest clamps which you can spend. You may get in touch with them for smaller glue jobs and expand them to their full length for larger jobs.

Shop Vice: A shop vice installed at the end of the bench is perfect for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the greater vices offer you quick release mechanisms that enabled the consumer to rapidly open and close the limbs without tedious handle turning. The timber clamping surfaces in your vice will occasionally require replacement. I prefer to utilize soft pine in my vices which won’t crush or damage lots of the different woods that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be among the most often used tools. Purchase a fantastic quality name brand tape measure with a broad tape usually from the 25-foot range. Although in your shop you might not use the tape in these lengths, the bigger tape measures provide more rigid tapes which will not flop around and slide off the end of boards. Assessing when you’re by yourself will be a lot easier, and naturally, quality tape steps can last for many decades.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the timber. Avoid oversize carpenter’s pencils. Their large flat leads are just too coarse for precise measurement in the workshop.

Other Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools can assist you in marking the right angles as well as compound angles. Get the number two and three Robertson set. I find the Robertson format works best for many woodworking jobs and will be the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and fixing small mistakes along the way.

Adhesives: Not many glues are made equal. Avoid cheap home brands marketed as carpenter’s glue. The cost of glue through all of your projects is a little cost consideration. Therefore, it is sensible to go with the best. I have also found over the years that I get the best results with both indoor and outdoor projects once I use quality outdoor grade adhesive. All these resin-based compounds unlike traditional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Free Patterns For Wood Projects

The peaceful gratification of woodworking is an excellent experience in this day and age of hurried lives, smartphones, and time-starved careers. With a minimum investment at the most basic equipment and tools, everyone can learn the profitable abilities of his time-tested avocation and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Wood shingle

Wood shingles are thin, tapered pieces of wood primarily used to cover roofs and walls of buildings to protect them from the weather. Historically shingles were split from straight grained, knot free bolts of wood. Today shingles are mostly made by being cut which distinguishes them from shakes which are made by being split out of a bolt.

Wooden shingle roofs were prevalent in the North American colonies (for example in the Cape-Cod-style house), while in central and southern Europe at the same time, thatch, slate and tile were the prevalent roofing materials. In rural Scandinavia, wood shingle roofs were a common roofing material until the 1950s.[disputed – discuss] Wood shingles are susceptible to fire and cost more than other types of shingle so they are not as common today as in the past.

Distinctive shingle patterns exist in various regions created by the size, shape, and application method. Special treatments such as swept valleys, combed ridges, decorative butt ends, and decorative patterns impart a special character to each building. Wood shingles can also be shaped by steam bending to create a thatch-like appearance, with unique roof details and contours.[1]

Video: Woodworking Projects