Free Plans For Woodworking Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those attributes alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, himself is also an instructor and a part of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking whenever they are after because most of the ideas and projects Ted’s source are easy to comprehend and simple. Ted McGrath spent two years researching so he could gather enough material for a comprehensive package, and he ended up making a really’complete’ woodworking resource.

Many might still seem unsure whether they should be buying Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it even more difficult to make the right option. There are in fact many things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit out of Ted’s woodworking Package. People that are just getting started will find the thoughts and jobs in Ted’s package quite simple. No doubt, intricate carpentry is involved; however, they will find it really simple to follow Ted’s simple step by step directions. Currently, both beginner and seasoned ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who purchase his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which will help beginners learn a lot about woodworking. They will also be able to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers will have the ability to locate any project of their choice in this package quite readily, though there so many choices.

60-Day Iron Clad Money Back Guarantee

In general, this item is and those who purchase it will be backed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long period to down because of its large size. Nonetheless, using a high-speed internet connection it should download within a few minutes.

Slightly Overwhelming

As there are several ideas, projects and plans in Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nevertheless, they did not mind being overrun considering how this package is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design package is so thorough and vast it contains just about every woodworking project a woodworker might be interested in building.

This woodworking bundle made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that are available throughout the internet. Ted has done his very best to guide them in every conceivable way he can, through easy to understand textual directions, clear pictures and even videos too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking jobs they will find inside. So, it’s definitely worth buying!

How to Become a Master Woodworker From Your Own Home Free Plans For Woodworking Projects

Woodworking is 1 hobby that could also be a rewarding profession if you love to work together with your hands and construct exquisite pieces of furniture from timber. When you learn that the woodworking crafts and become a fine woodworking craftsman, you will have the ability to construct all kinds of furniture, (beds, table, and chairs), with ease. You can then sell your finished woodworking jobs and make a handsome profit. Free Plans For Woodworking Projects.

It takes time to become skilled in the craft of woodworking. The nice thing about working up to that expert craftsman level is you will have the ability to build some really wonderful furniture to you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit in your living room. It’ll be a topic of conversation when you have friends come over to see. They will ask: How can you make it? How long can it take to finish the project? What type of tools did you use? Just how on earth did you make such a beautiful piece of furniture? As you discuss your work, a feeling of pride will come over you and also don’t be surprised if your friends ask you to make one for them too!

Starting Your First Woodworking Shop Free Plans For Woodworking Projects

If you are thinking you are just too old or too young for woodworking, think again! You’re never too old or too young for such an enjoyable hobby and it is ideal for beginners!

Where to begin in Woodworking? Free Plans For Woodworking Projects.

Begin with a concept in your mind of what you would like to build and then get a really good woodworking project plan that is geared toward beginners. There are several small woodworking projects for beginners available for purchase from online woodworking merchants. Obviously, you can start out with as expansive a woodworking plan as you choose. On the other hand, the odds are if you start out with a little woodworking project initially, you will have a better prospect of keyword completing the project.

Your woodworking project plan must include some lists! Lists of: woodworking hardware, the amount and variety of wood required, and the required hand tools and power tools to complete the undertaking. Note: A word of caution about buying woodworking tools. Just buy what you want to finish your immediate or upcoming project. This is important especially if you’re a beginner and just starting out. Tools aren’t affordable. The beginner needs good woodworking gear, but you can easily break the bank purchasing a lot of tools you might not utilize all that frequently. When you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also do not overlook the wood glue and a brush to spread the wood adhesive! Obviously, you’ll require a dry area to work and might need a set of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more woodworking hand tools and more woodworking power tools , but the concept is to buy the essential hand and power tools which beginners will need. You may always increase your toolbox as you get experience!

Free Plans For Woodworking Projects Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you’ve purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. But if you are unsure about what to do there is help available! There are lots of places that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of the many woodworking magazines out there. Each month the authors in woodworking publications do a story on the best way best to increase your woodworking craft. Whether it is showing you the way to apply an end to a completed project, or how to make a mortise and tenon joint, something new can be learned every month. Next, is buying educational DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to work with a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Free Plans For Woodworking Projects

If you’re a beginner and very interested in doing a DIY job for house afterward, woodworking can be fun. If you do not have the right information, instruction, and skill, you might land up spending more money and time than you initially intended to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having said, there are a couple of essential aspects you should keep in mind, before starting with any woodworking project.

1. If you are a beginner, you should first need to be very interested in woodworking. Making something new with your hands is a particular sense. Don’t start a job if you’re not interested, as this may land you in a terrible place.

2. Consider the main reason behind making this woodworking project. Decide on the uses of this thing you’re making.

3. Consider your abilities and analyze the time you have, before you begin with a project.

4. Start jobs that you can complete. If you’re in the middle of some work, then it is wise to not start any project in any way.

Finding Woodworking Projects and Plans for Beginners Free Plans For Woodworking Projects

If you maintain these essential things in mind before you begin a woodworking project, it will become very easy for you to reach success. Woodwork requires preparation as much because it requires effort. So how can you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking jobs you wish to begin with. As a beginner, always select a job that has a very basic construct up or a simple construction. Some simple to start projects include, bird feeder, chairs, shelves, etc.. The moment you get hold of the techniques, you could always move to the next level of woodworking jobs, such as cupboards, sheds, along with others. Beginning projects should always keyword be complicated and less bothersome so you have a better knowledge of working with woods and their tools. Once the job is selected, start selecting your tools.

Beginners Woodworking Tools, Free Plans For Woodworking Projects

Tools are the means through which you will win the battle of woodworking. Many men and women think that power tools are requires. But for novices, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is your hobby, then a few tools that you would demand are:

1. Workbench – A workbench is required for exact cuts and dimensions. The workbench, when fixed with vises, provide ample space to operate. As a primary tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters much simple for you. When you purchase a hammer, always assess the balance between the weight and endure. Always select a sturdy, yet lightweight item.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool helps you to cut forests at different sizes. There are different types of saws out there in the market. Choose a size which you could handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat type. Possessing all of them will help you ahead of time woodworking. You can also purchase keyword energy screwdrivers since they make the work much faster.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you demand a wrench. However, this is not a tool for novices, but having it would make work easier for you in a later stage.

7. Drill – Drill helps you create holes in timber. Power drills are more useful but they cost more. Low wattage power drills will make the task much easy.

8. Other small and basic tools – These include pencils, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is not any fixed price on woodworking jobs. Dependent on the sort of project that you want to complete, pricing could be determined. The simple the project, the less price it involves. But at the beginning purchasing the tools will probably be a little hefty. Therefore, it is better to fix a budget first on the resources, then keyword on the undertaking. Purchasing the basic tools will ensure that you don’t have to purchase any more material other than the timber ply.

Time and Instructions

Instructions are among the principal things that each and every newcomer should follow. Instructions manual is quite simple to understand the procedure, what to do and the way to do it. Time also has an important role in the construction of woodworking projects. Woodworking projects demand time and so it is necessary for a novice to have ample amount of time weekly.

Tips and Tricks for Beginners

There are no quick tips or tricks that would make the work easy. But the most essential thing keyword which can allow you to reach success is proper preparation. With appropriate planning and a plan, it’s likely to achieve success quickly. If you understand the purpose of woodworking, then the item you need to build, the tools you need to own and the average time it’s possible to devote every day; then you’re all set to go.

Conclusion, Free Plans For Woodworking Projects

These tips and education will make the woodworking projects and plans for novices quickly to finish. Always ensure that you have all the essential tools, materials, space prepared. Keep the instructions for building a product handy. Appropriate strategy and planning can allow you to make a fantastic woodworking job for your property.

|

Finding Woodworking Projects and Plans for Beginners Free Plans For Woodworking Projects

Folks if you’re trying to find a way to pass time or desire an alternate method to generate money they usually turn into a hobby they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking at home there are a lot of projects one can consider. When starting out you need to be very cautious when choosing which job to begin with since you will find jobs that may be too tough for a beginner. But do not be concerned about that because we will provide you guidelines on the ideal way to start woodworking as a beginner.

Just like any other hobby woodworking requires some working gear, therefore before you pick your job you have to be aware of whether you’ve got the available tools to work on that job. Try not to spend a good deal of money on purchasing equipment when starting out, buy more gear as you gain more experience and become a professional carpenter. If you enjoy your hobby then there’ll not be any difference between the hand and the normal hands.

The Benefits of Woodworking Free Plans For Woodworking Projects

Woodworking at home will provide you time to research different jobs and learn so many things. That’s why it’s important to spend less money when starting out so that you can manage to make errors and at any time learning about different projects.
It’s very important that you know more about the different types of wood available for creating projects. Anticipate carpenters use several kinds of wood quality for decorating pieces, learning which type of wood they use can allow you to prepare the wood you’ll need for specific projects you may want to pursue.
Once you understand the basics of wood choice and the usage of different tools now you can implement them in cutting out well wood pieces and putting wood together. Knowing what to do will help you in building good jobs to satisfy your wants.

Free Plans For Woodworking Projects practice makes perfect so be sure that you practice your work daily if at all possible. Try out lots of layouts utilizing a variety of tools so you can find the hang of using the tools. When starting out you can earn a number of errors but with time you will learn how to properly utilize them and produce quality projects.

|

The Benefits of Woodworking Free Plans For Woodworking Projects

Woodworking as a hobby can be among the most rewarding experiences you will ever enjoy. You can begin on a shoestring with a minimum number of gear and equipment. A small home workshop can produce a broad array of simple projects that will help you develop your creative and construction abilities while rewarding you with artistic and practical wood products which you can enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let us discuss where you’ll do your woodworking, Depending on the dimensions of your house, you might be able to create a dedicated space into your woodworking activities. This may be a reserved place in your garage or in your basement. Sometimes, a detached shed or outbuilding might be perfect to prepare your first shop. A heated store detached from your home provides one distinct advantage: better pest management. Without sophisticated dust control methods, basement assignments will inevitably create dust which travels to the living area of your home. This is very true in homes with forced air heating systems where cold air returns found in the basement draw dust up into the upper levels of the home. Another advantage of detached workshops would be, of course, the noise level. You can work without disturbing the rest of the household. A fantastic compromise might be the garage of your home.

This might help minimize the difficulties of dust and sound, however based on where you live, a keyword garage workshop might not be sensible during extremes of hot or cold weather.

Starting Your First Woodworking Shop Free Plans For Woodworking Projects

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes they include more space to function in. Free Plans For Woodworking Projects if you’re able to have a dedicated place for a marathon all the better. Floor gear and bench top equipment can stay in position from project to project. If this installation isn’t hopeless, at least attempt to create a bench area where equipment could be stored and pulled out as needed. If possible plan for inevitable growth as you get more tools and equipment. At the beginning, set up a seat area where you are able to store and use the majority of your equipment, using a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. Add a sturdy shelf below the seat to home your hand power tools along with a pegboard over the seat to hang other gear. Install a woodworking at one end of the bench on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Free Plans For Woodworking Projects

The scope of your startup equipment will be largely based on your financial plan. Whether you have got big financial resources or you’re starting on a shoestring always purchase quality equipment. If you can afford it, then buy your quality tools at your regional building and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or alternative regional advertisements. There are plenty of quality gently used programs out there which belong to individuals who stumbled on that 1 molding project around the house or received tools as presents that they will never use. You can usually purchase tools for these sellers for under half the initial cost and save even more money if you make a bundle deal for all their unused equipment. Of course, getting tools from private people will take extra time and possibly travel expenditures. Weigh the benefits of traveling across town to save a couple extra dollars on a inexpensive piece of gear. The extra cost of travel and time in these situations is generally justified when purchasing large ticket items such as table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a trip to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal quantity of hand gear yet generated sophisticated and complex pieces. Focus on developing your abilities with your start-up set of tools and avoid lamenting about the equipment you wished you’d.
Here is a checklist of the useful tools You Will Need to get started:
Safety Gear: Start as anticipated by eye protection. Get a nice pair of safety glasses which also offer you some side protection to your eyes. Buy a quality oil set that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually hamper your vision and affect security. Avoid wearing goggles in a workshop. Most impair vision and dust up fast. You may avoid wearing all of them together if you find them uneasy.

The next piece of crucial safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking can be long-term and noisy exposure to these noise levels may affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire quicker when subjected to high noise levels. Select effective hearing protection that you find comfortable and effective. Last, put on a cap to keep the dust from your hair. I am keeping the dust out of my hair. I am all set!

Power Hand Saw: Often referred to as a skill saw following the popular name, this can end up being the most flexible tool in a startup workshop. In fact, in the hands of a professional, a power hand saw can be employed to build an entire house. As mentioned earlier get a quality brand saw. Avoid cheap unknown brands. These are inclined to cut inaccurately and will burn out before you start your second job. After selecting the right saw install a quality blade. Most skill saws include a starter blade of lower quality even if they’re a good saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will include great versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument cannot just cut curves. It’s ideal for cutting holes in wood also like manage slots. At some point, you’re going to want to obtain a band saw. Bandsaws are even more flexible but a quality floor unit could be expensive. A jigsaw can be a good stop gap for the novice woodworker.

Purchase an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the standard 3/8 inch model. Down the street, the 1/2 inch version will end up being more versatile. Through hard lessons learned, I have found that purchasing quality, in this case, is much more crucial than ever. Cheaper drills tend to get very short run times and have to be recharged frequently. Their battery life tends to be poor and to make matters worse keyless chucks come loose and slide frequently. This is 1 annoyance you do not need on your workshop. Purchase an range of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Make a habit of returning every drill bit to its potential slot at the holder after each use. Last, get a set of tough steel driver bits. Your drill can also be a versatile screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer stays as the most flexible instrument in the shop, and often the most misunderstood one. |} By the way, the hammer is the one tool where most workshop accidents occur. Although the most frequent, hammer accidents are usually of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the handle and head. The mind usually comes loose and the instrument becomes useless. Select a name brand quality hammer at the 16-ounce range for overall work and also a smaller finishing hammer for more intricate work. Avoid using big framing hammers at the workshop and any with dimpled mind tips. These kinds of hammers are more appropriate for rough framing jobs and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can handle pretty much any sanding requirements you have as a beginner woodworker. As your woodworking skills evolve, you’ll likely update to a floor model disc and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface area. As you embark on the first few projects you’ll find your palm sander with just a little bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough planks using 100 grit paper and after finish your job with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets using an extra supply of 100 grit paper. You’ll get that this grade of paper the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Though low tech in theory, these tools enable you to taper edges, flatten high spots and correct any imperfections in timber bits. {Begin with a typical amount 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold down your wood bits as you work on them. Unfortunately, good clamps are expensive and it normally takes the beginner woodworker a couple of years to accumulate a detailed set of timber clamps. Begin with a set of long”pipe” clamps. Now the pipe has been replaced with extended steel shafts, however, the structure is still the same. Receive a set of the longest clamps that you can spend. You can get in touch with them for smaller adhesive jobs and enlarge them to their full length for bigger jobs.

Shop Vice: A shop vice installed in the end of your bench is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices using their wood clamping surfaces can securely hold wood bits without marring or damaging them. Many of the better vices offer rapid release mechanisms that enabled the user to rapidly open and close the limbs without tedious handle rotation. The timber clamping surfaces on your vice will periodically require replacement. I would rather use soft walnut in my vices which won’t crush or damage many of the various forests that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be one of your most often used tools. Buy a fantastic quality name brand tape measure with a broad tape typically from the 25-foot selection. Although in your store you might not be using the tape at these spans, the larger tape measures provide more rigid tapes that won’t flop around and slip off the ending of boards. Measuring when you’re by yourself will be a great deal simpler, and of course, quality tape measures can endure for many years.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the wood. Avoid oversized carpenter’s pencils. Their big flat leads are just too coarse for precise measurement in the workshop.

Other Tool and Materials: Here are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools can assist you in marking the right angles in addition to compound angles. Get the number three and two Robertson set. I find the Robertson format works best for many woodworking jobs and will be the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood files. The cost of adhesive through all your jobs is a little cost consideration. For that reason, it makes sense to decide on the very best. I also have discovered over the years that I receive the best results with both indoor and outdoor projects once I use quality outside grade glue. These resin-based compounds unlike conventional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Free Plans For Woodworking Projects

The peaceful gratification of woodworking is a wonderful adventure in this era of rushed lives, smartphones, and time-starved livelihood. With a minimum investment at the most rudimentary tools and equipment, everyone can learn the rewarding skills of his time-tested hobby and enjoy job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Woodcraft Supply

Woodcraft Supply, LLC operates woodworking specialty retail stores across the United States (including 34 of 50 U.S. states). It also publishes a woodworking industry magazine, distributes consumer catalogs (in all 50 U.S. states and 117 countries)[1] and operates an ecommerce website.[2] The stores, catalogs and website combined sell about 20,000 products covering wood working tools, raw materials, instructional media and project kits.[3][4][5][6]

In the 1960s, Roger Wells bought Woodcraft and moved the headquarters to Woburn, Massachusetts. Woodcraft moved into a warehouse and corporate office after the success of its initial printed ads which led to creation of its catalog. Sam Ross, founder of SBR Inc., bought Woodcraft in 1972 and used his retail experience to build new stores and grow the company. In 1992, Sam Ross moved Woodcraft headquarters to Parkersburg, West Virginia.[8][9]

Woodcraft opened a new Boston area corporate location in Walpole, Massachusetts in 2013. That same year, Woodcraft and the Swiss toolmaker Pfeil celebrated 50 years as international business partners.[12]

Video: Woodworking Projects