Free Printable Woodworking Patterns | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable ideas and projects.

The package has various qualities that make it the”#1 woodworking Resource” and some of those attributes along with a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they’re after because most of the thoughts and projects Ted’s source are easy to comprehend and simple. Ted McGrath spent two years researching so he could collect enough material for a comprehensive package, and he ended up making a really’complete’ woodworking resource.

Many might still appear unsure if they need to be purchasing Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it even more challenging to make the ideal option. There are actually many things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to profit out of Ted’s woodworking Package. Those who are only getting started will discover the thoughts and jobs in Ted’s bundle quite simple. Without doubt, intricate carpentry is demanded; however, they will find it really easy to follow Ted’s simple step by step instructions. Presently, both novice and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who purchase his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will be able to find any job of their choice within this bundle quite easily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who purchase it will be backed by a 60-day guarantee, so when this woodworking bundle fails to satisfy them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long time to down because of its large size. Yet, with a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overrun considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so thorough and vast it contains just about every woodworking project a woodworker may be considering constructing.

This woodworking package created by Ted McGrath is really unmatchable and cannot be compared to those other woodworking bundles that can be found throughout the net. Ted has done his best to guide them in every conceivable way he can, through simple to comprehend textual instructions, clear pictures and even movies too.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find inside. So, it is definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more woodworking hand tools and more woodworking power tools , but the idea is to purchase the crucial hand and power tools which beginners will need. You can always add to your arsenal as you get experience!

Free Printable Woodworking Patterns Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you’ve purchased your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to finish your project. However, if you’re unsure about what to do there is help available! There are several places that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of those several woodworking magazines out there. Every month the writers in woodworking publications do a story on how to increase your woodworking craft. When it’s showing you how you can apply a finish to a completed project, or how to create a mortise and tenon joint, something new could be heard each month. Next, is buying instructional DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to use a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Free Printable Woodworking Patterns

If you’re a beginner and very enthusiastic about doing a DIY project for house then, woodworking can be fun. If you don’t have the right information, education, and ability, you may land up spending more money and time than you originally meant to spend. As a novice woodworker, you need to have space, time and the appropriate tools. Having said, there are a few essential factors you should keep in mind, before starting with any woodworking project.

1. If you’re just beginning, you should first need to be somewhat interested in woodworking. Making something new with your own hands is a special sense. Don’t begin a project if you are not interested, because this might land you in a bad place.

2. Think of the main reason behind making this woodworking project. Choose the uses of the item you are making.

3. Consider your abilities and analyze the time you have, until you start with a project.

4. Start projects which you’re able to finish. If you’re in the midst of some work, then it’s better to not start any project at all.

Starting Your First Woodworking Shop Free Printable Woodworking Patterns

If you keep these essential points in your mind before you begin a woodworking project, it is going to become very simple for you to reach success. Woodwork requires planning as much because it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to choose the woodworking projects you want to start with. As a beginner, always pick a project which has quite a basic build up or a simple construction. Some easy to start projects include, bird feeder, benches, shelves, etc.. As soon as you find these techniques, you could always move into the next level of woodworking projects, like cupboards, sheds, along with others. Beginning projects should always keyword be complicated and less frustrating so you have a better comprehension of working with woods and their tools. When the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Free Printable Woodworking Patterns

Tools would be the ways through which you can win the struggle of woodworking. Many people believe power tools are requires. But for beginners, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is your hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and dimensions. The workbench, when fixed with vises, provide ample space to work. As a key tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make things much simple for you. When you purchase a hammer, constantly assess the balance between the weight and endure. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool helps you to cut forests at several sizes. There are various sorts of saws available on the market. Decide on a size that you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Having all of them will help you ahead of time woodworking. You might also buy keyword power screwdrivers since they make the work much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape gives you the capacity to quantify wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you require a wrench. Nonetheless, this isn’t a tool for novices, but having it would make work easier for you in a subsequent stage.

7. Drill – Drill helps you make holes in timber. Low wattage power drills can make the task much easy.

8. Other small and fundamental tools – These include pens, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is no fixed price on woodworking projects. Based on the sort of project that you would like to finish, pricing could be set. The simple the project, the less price it involves. But at the very beginning purchasing the tools will be a little hefty. Because of this, it is better to fix a budget on the tools, then keyword on the project. Buying the fundamental tools will ensure that you do not have to purchase any more material aside from the wood ply.

Time and Directions

Directions are one of the principal things that every newcomer should follow. It’s like the woodworking Bible. Instructions guide is very simple to comprehend the process, what to do and the way to do it. It keyword is a systematic manual for finishing the job. Time also has an important role in the construction of woodworking projects. Woodworking projects require time and so it’s crucial for a beginner to have ample quantity of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. Nevertheless, the most indispensable thing keyword that can help you to reach success is proper preparation. With proper planning and a plan, it is possible to achieve success quickly. If you understand the purpose of woodworking, then the thing you want to build, the tools you require in order to possess and the average time it’s possible to give daily; then you’re ready to go.

Conclusion, Free Printable Woodworking Patterns

All these tips and instruction will create the woodworking projects and strategies for novices quickly to complete. Always ensure that you have all the essential tools, materials, space ready. Read the instructions for building an item handy. Proper strategy and preparation will help you to earn a great woodworking project for your property.

|

How to Become a Master Woodworker From Your Own Home Free Printable Woodworking Patterns

Folks if you’re looking for a way to pass time or want an alternative method to generate money they usually turn to a hobby they enjoy. It is very exciting to do and anyone can begin.

When doing woodworking in your home there are lots of jobs one can consider. When starting out you have to be quite cautious when choosing which job to start out with because there are projects that can be too tough for a beginner. But don’t be concerned about that since we will provide you guidelines on the right means to start woodworking as a newcomer.

The same as any other hobby woodworking requires some working gear, so before you choose your job you need to know whether you’ve got the available tools to work on such a job. Try not to spend a good deal of money on purchasing gear when starting out, buy more gear as you gain more experience and become a professional carpenter. If you enjoy your hobby then there will not be any gap between the artistic hand as well as the normal hands.

The Benefits of Woodworking Free Printable Woodworking Patterns

Woodworking in your home will provide you time to explore unique projects and find out a lot of things. That is why it’s very important to invest less money when starting out so that you can manage to make errors and at any time learning about various jobs.
It is very important that you know about the different kinds of wood available for creating jobs. Expect carpenters utilize different kinds of wood quality for decorating pieces, learning which kind of wood they use can allow you to prepare the wood you’ll need for specific jobs you may want to pursue.
As soon as you know the fundamentals of wood selection and the usage of different tools you can now employ them in cutting well wood pieces and placing wood together. Knowing what to do will assist you in creating good jobs to satisfy your needs.

Free Printable Woodworking Patterns practice makes perfect so make sure that you practice your work daily if at all possible. Try out a lot of layouts utilizing a variety of tools so that you can find the hang of using the tools. When starting out you may make a number of mistakes but with time you will find out how to properly utilize them and create quality projects.

|

The Benefits of Woodworking Free Printable Woodworking Patterns

Woodworking as a hobby may be one of the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimal amount of gear and equipment. A small home workshop can generate a wide variety of simple projects which will allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products that you are able to appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us discuss where you will perform your woodworking, based on the size of your house, you may have the ability to produce a dedicated space to your woodworking activities. This may be a reserved place in your garage or on your cellar. In some cases, a detached shed or outbuilding may be perfect to set up your very first store. A heated shop detached from your home offers one distinct advantage: better dust control. Without complex dust control methods, basement workshops will inevitably create dust that travels to the living area of your home. This is particularly true in homes with forced air heating systems in which cold air yields found in the cellar draw up dust into the upper levels of the house. Another advantage of detached workshops would be, clearly, the noise level. You can work without bothering the rest of the household. A fantastic compromise might be the garage of your home.

This can help decrease the problems of dust and sound, however depending on where you live, a keyword garage layout may not be sensible during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Free Printable Woodworking Patterns

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes they add more space to function in. Free Printable Woodworking Patterns if you can have a dedicated spot for a marathon all the better. Floor gear and bench top gear can stay in position from project to project. If this installation is not hopeless, at least try to make a chair area where equipment could be stored and pulled out as necessary. If at all possible plan for inevitable growth as you acquire more tools and equipment. In the start, set up a bench area where you can store and use most of your gear, with a temporary expansion of your activities onto the garage or basement floor.

A basic workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. Insert a sturdy shelf beneath the seat to house your hands power tools along with a pegboard over the bench to hang other equipment. Install a woodworking at one end of the bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Free Printable Woodworking Patterns

The reach of your startup equipment will be mostly based on your budget. Whether you have got large financial resources or you’re starting on a shoestring always buy quality gear. If you can afford it, then buy your quality tools in the local construction and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or alternative regional advertisements. You will find plenty of quality lightly used tools out there that belong to individuals who embarked on that 1 molding project around the home or received tools as gifts that they won’t ever utilize. You can usually purchase tools for all these sellers for less than half the original price and save even more money should you make a bundle deal for all their unused equipment. Obviously, getting tools from private individuals will require extra time and perhaps travel expenses. Weigh the advantages of traveling around town to save a few extra dollars on a inexpensive piece of gear. The excess expense of time and travel in these scenarios is generally justified when buying large ticket items like table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a trip to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal quantity of hand gear yet generated sophisticated and intricate pieces. Concentrate on developing your abilities with your start-up set of tools and avoid lamenting about the gear you wished you’d.
Here’s a listing of the useful tools you’ll need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses that also offer you some side protection for your eyes. Purchase a quality oil collection that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually impair your vision and affect security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up fast. You can avoid wearing all of them together if you find them uneasy.

The next piece of critical safety equipment you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking can be noisy and long-term exposure to those sound levels can affect hearing and lead to tinnitus and other hearing losses. I prefer a very simple ball cap along with my ear muffs and eye protection. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often referred to as a skill saw following the popular brand name, this may prove to be the most versatile tool in a startup workshop. In reality, in the hands of a professional, a power hand saw can be employed to build an entire property. As mentioned before get an excellent manufacturer saw. Stay away from cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your second project. After selecting the right saw put in an excellent blade. Most skill saws come with a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade as a copy and install a quality blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool cannot just cut corners. It is perfect for cutting holes in wood also like manage slots. At some point, you’re going to want to get a ring saw. Bandsaws are much more flexible but a quality floor unit can be expensive. A jigsaw can be a good stop gap for the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss over the conventional 3/8 inch model. Down the street, the 1/2 inch version will end up being more versatile. Through tough lessons learned, I have found that purchasing quality, in this scenario, is much more crucial than ever. Cheaper drills tend to get very short run times and have to be recharged frequently. Their battery life will be bad and to make matters worse keyless chucks come loose and slip frequently. This is one annoyance you don’t need in your workshop. Purchase an assortment of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Make a habit of returning each drill piece to its potential slot at the holder after every use. Lastly, get a set of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer stays as the most flexible tool in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop injuries happen. Even though the most ordinary, hammer accidents are usually of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce scope for overall work and a smaller completing hammer for more intricate work. Avoid using big framing hammers at the workshop and any with dimpled mind tips. These kinds of hammers are more appropriate for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can manage just about any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you’ll probably update to a floor version disc and belt sander. But for now, the ever-versatile palm sander can clean up edges, cross cuts and even limited amounts of surface area. As you embark on your first few projects you’ll discover that your palm sander with a bit of effort can transform rough looking creations into virtual works of art! It is possible to use your palm sander to sand and form rough planks using 100 grit paper and after finish your work with 200 or 300 grit paper. Buy an range of sandpaper sheets with an extra source of 100 grit paper. You’ll find that this caliber of paper the most versatile in your shop.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Although low tech in theory, these tools allow you to taper edges, flatten high spots and correct any imperfections in wood bits. {Start with a standard amount 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood pieces as you operate on them. Unfortunately, superior clamps are costly and it normally takes the beginner woodworker a couple of years to collect a comprehensive set of wood clamps. Start with a pair of extended”pipe” clamps. Now the pipe was replaced with long steel shafts, however, the structure is still the same. Get a set of the longest clamps which you can spend. You may get in touch with them for smaller glue jobs and expand them to their entire length for bigger jobs.

Shop Vice: A store vice installed in the end of the seat is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices using their timber clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the better vices offer you rapid release mechanisms that enable the consumer to quickly open and close the jaws without dull handle rotation. The timber beamed surfaces in your vice will occasionally need replacement. I prefer to use soft walnut in my vices that won’t crush or damage many of the various forests that I work with. Whether I am working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be one of the most frequently used tools. Purchase a good quality name brand tape measure with a wide tape usually in the 25-foot range. Although in your store you might not be using the tape in these spans, the bigger tape measures offer more rigid tapes which won’t flop around and slide off the ending of planks. Measuring when you are by yourself will be a lot easier, and naturally, quality tape steps can last for many decades.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the timber. Avoid oversized carpenter’s pencils. Their big flat leads are just too coarse for precise measurement in the workshop.

Additional Tool and Materials: Here are a few other useful tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools can help you in marking the ideal angles in addition to compound angles. Get the number two and three Robertson set. I discover the Robertson format works great for most woodworking projects and is the most compatible with a drill powered pieces. Last, get a set of 12-inch wood files. The cost of adhesive through all your projects is a minor cost consideration. Therefore, it makes sense to go with the very best. I have also found over the years that I receive the best results with both indoor and outdoor jobs once I use quality outdoor grade adhesive. These resin-based compounds unlike conventional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Free Printable Woodworking Patterns

The peaceful gratification of woodworking is an excellent experience in this era of rushed lives, smart phones, and time-starved careers. With a minimal investment at the most basic tools and equipment, anyone can learn the rewarding abilities of his time-tested hobby and revel in job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Applications of 3D printing

In recent years, 3D printing has developed significantly and can now perform crucial roles in many applications, with the most important being manufacturing, medicine, architecture, custom art and design.

3D printing processes are finally catching up to their full potential, and are currently being used in manufacturing and medical industries, as well as by sociocultural sectors which facilitate 3D printing for commercial purposes.[1]

For a long time, the issue with 3D printing was that it has demanded very high entry costs, which does not allow profitable implementation to mass-manufacturers when compared to standard processes. However, recent market trends spotted have found that this is finally changing. As the market for 3D printing has shown some of the quickest growth within the manufacturing industry in recent years.[2]

Video: Woodworking Projects