Free Wood Building Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable ideas and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and a few of those qualities alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an educator and a member of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking whenever they’re following because most of the ideas and jobs Ted’s source are easy to comprehend and simple. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive package, and he ended up creating a truly’complete’ woodworking source.

Many might still appear unsure if they need to be purchasing Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it even more difficult to make the right option. There are in fact many things that place Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to profit out of Ted’s woodworking Package. Those who are just getting started will discover the ideas and jobs in Ted’s package quite simple. Without doubt, complicated carpentry is involved; however, they will discover that it’s really simple to follow Ted’s easy step by step instructions. Presently, both novice and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who buy his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource that will help beginners learn a lot about woodworking. They will also be able to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 easy woodworking ideas and woodworking projects. Woodworkers are going to have the ability to find any project of their choice in this package quite readily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

In general, this product is and those who buy it will be endorsed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long time to down because of its large dimensions. Yet, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overwhelmed considering how this package is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast that it contains just about every woodworking project a woodworker might be considering building.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that can be found throughout the internet. Ted has done his best to guide them in every conceivable way he could, through easy to comprehend textual instructions, clear images and even videos as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking jobs they will find inside. So, it’s definitely worth buying!

How to Become a Master Woodworker From Your Own Home Free Wood Building Plans

Woodworking is 1 hobby that could also be a rewarding career if you love to work with your hands and build beautiful pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a nice woodworking craftsman, you’ll be able to build all types of furniture, (table, beds, and chairs), with ease. After that you can sell your finished woodworking projects and make a handsome profit. Free Wood Building Plans.

It requires time to become skilled at the craft of woodworking. The wonderful thing about working up to this expert craftsman level is you will have the ability to create some really nice furniture to you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit in your living space. It will be a subject of conversation whenever you have friends come over to visit. They’ll ask: How can you make it? How long did it take to finish the project? What type of tools did you use? Just how on earth did you create such a gorgeous item of furniture? As you discuss your work, a sense of pride will encounter you and also don’t be surprised if your friends ask you to make one for them too!

Finding Woodworking Projects and Plans for Beginners Free Wood Building Plans

If you’re thinking you are just too old or too young for woodworking, think again! You’re never too old or too young for such a fun hobby and it is perfect for beginners!

Where to begin in Woodworking? Free Wood Building Plans.

Begin with a concept in your mind of what you would like to build then get a excellent woodworking project plan that is geared toward beginners. There are numerous small woodworking projects for beginners available for sale from online woodworking merchants. A couple of woodworking plan suggestions to get you thinking really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child just to mention a couple. Of course, you can start out with as grand a woodworking program as you choose. On the other hand, the chances are if you begin using a small woodworking job at first, you’ll get a better prospect of keyword finishing the job.

Your woodworking project plan must incorporate some lists! Lists of: woodworking hardware, the amount and variety of wood required, and the essential hand tools and power tools to complete the undertaking. Note: A word of caution about purchasing woodworking tools. Only buy what you need to finish your instant or upcoming project. This is important especially if you are a beginner and just beginning. Tools are not affordable. The newcomer needs good woodworking gear, but it is simple to break the bank purchasing a lot of tools you might not use all that frequently. When you do buy gear, buy quality. Do a little research and compare products. Buy the best that you could afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also don’t overlook that the wood glue and a brush to spread the wood glue! Of course, you will need a dry place to work and might require a set of saw horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and more woodworking power tools here, but the idea is to purchase the crucial hand and power tools that beginners will need. You may always increase your arsenal as you gain experience!

Free Wood Building Plans Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you have bought your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. However, if you’re unsure about what to do there is help available! There are lots of areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of those several woodworking magazines available. Every month the writers in woodworking publications do a story about how best to increase your woodworking craft. Whether it is showing you the way to apply a finish to a finished job, or how to make a mortise and tenon joint, something new can be heard every month. Next, is purchasing educational DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to use a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Free Wood Building Plans

If you are a beginner and very enthusiastic about doing a DIY project for house then, woodworking could be interesting. If you don’t have the right information, instruction, and skill, you may land up spending more time and money than you initially intended to spend. As a novice woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a couple of essential aspects that you need to remember, before starting with any woodworking project.

1. If you are a beginner, you must first need to be very interested in woodworking. Creating something new with your hands is a special feeling. Do not begin a job if you’re not interested, as this may land you at a terrible place.

2. Think of the main reason behind creating this woodworking project. Choose the uses of this item you are making.

3. Consider your skills and examine the time you have, before you begin with a job.

4. Start projects which you can complete. If you’re in the middle of some work, then it is wise to not begin any project at all.

Starting Your First Woodworking Shop Free Wood Building Plans

If you keep those essential things in your mind before beginning a woodworking project, it is going to become very easy for you to reach success. Woodwork requires planning as much as it takes effort. So how do you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to opt for the woodworking jobs that you wish to start with. As a beginner, always select a job that has a very basic build up or a simple structure. A few easy to begin projects include, bird feeder, benches, shelves, etc.. The moment you find these techniques, you could always proceed to the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning jobs should always keyword be complicated and less bothersome so you have a better knowledge of working with woods and their tools. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Free Wood Building Plans

Tools would be the ways whereby you will win the battle of woodworking. Many men and women believe power tools are needs. But for beginners, basic hand tools can be quite handy and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for exact cuts and dimensions. Even the workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer can make matters considerably easy for you. When you buy a hammer, always check the equilibrium between the weight and endure. Always select a hardy, yet lightweight product.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are different types of saws available in the market. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian types and standard flat kind. Possessing all of them will help you in advance woodworking. You might even buy keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape gives you the capacity to quantify wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you demand a wrench. However, this isn’t a tool for beginners, but using it would make work easier for you in a later stage.

7. Drill – Drill helps you create holes in wood. Power drills are more useful but they cost more. Low wattage power drills can make the task much easy.

8. Other small and fundamental tools – These include pencils, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s no fixed cost on woodworking projects. Based on the sort of job that you would like to complete, pricing could be determined. The simple the project, the less price it involves. But at the beginning buying the tools will be somewhat hefty. Because of this, it is better to fix a budget on the resources, then keyword on the undertaking. Purchasing the basic tools will make certain you don’t have to purchase any more material aside from the timber ply.

Time and Instructions

Directions are among the principal things that each and every newcomer should follow. Instructions guide is quite easy to understand the procedure, what to do and how to get it done. It keyword is a systematic guide for completing the project. Time also has an important part in the construction of woodworking projects. Woodworking projects require time and so it’s crucial for a novice to have ample amount of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most indispensable thing keyword that will help you to achieve success is proper planning. With proper planning and a strategy, it is likely to achieve success quickly. If you understand the objective of woodworking, then the thing you need to construct, the resources you require to possess and the typical time you can devote every day; then you’re all set to go.

Conclusion, Free Wood Building Plans

All these tips and education will create the woodworking projects and strategies for novices fast to complete. Always ensure you have all of the essential tools, materials, area prepared. Read the instructions for building an item handy. Appropriate strategy and planning will allow you to make a great woodworking job for your property.

|

Finding Woodworking Projects and Plans for Beginners Free Wood Building Plans

Folks if you’re looking for a way to pass time or want an alternate way to make money they usually turn to a hobby that they enjoy. Woodworking is one of the hobbies people turn to perform as a hobby or home based business. It’s very exciting to do and anyone can get started.

When doing woodworking at home there are a lot of jobs one can think of. When starting out you have to be quite careful when choosing which job to begin with because there are jobs that may be too difficult for a beginner. But don’t be concerned about that since we will give you tips on the right means to begin woodworking as a beginner.

The same as any other hobby woodworking demands some working equipment, so before you choose your project you have to be aware of if you have the available resources to work on such a project. Try not to spend a good deal of money on buying equipment when starting out, buy more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there will not be any gap between the artistic hand as well as the normal hands.

Starting Your First Woodworking Shop Free Wood Building Plans

To keep yourself updated you have to disseminate with various brands tools and woods. Woodworking in your home will give you time to research unique jobs and learn a lot of things. That is why it’s important to spend less money when starting out so you can manage to make mistakes and at any time learning about different projects.
It is very important you know about different kinds of wood available for making jobs. Anticipate carpenters use several types of wood quality for decorating bits, learning which kind of wood they use will allow you to prepare the wood you’ll need for specific jobs you might want to pursue.
Once you understand the basics of wood selection and the use of different tools now you can employ them in cutting well wood pieces and putting wood together. Knowing what to do can help you in creating good jobs to satisfy your needs.

Free Wood Building Plans practice makes perfect so be sure you practice your work daily if at all possible. Try out lots of layouts utilizing various tools so that you may get the hang of working with the tools. When starting out you can earn a range of errors but with time you will find out how to properly use them and produce quality projects.

|

Starting Your First Woodworking Shop Free Wood Building Plans

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever enjoy. You may begin on a shoestring with a minimal amount of gear and equipment. A little home workshop may produce a wide variety of simple projects that can help you develop your creative and construction skills while rewarding you with artistic and practical wood products that you are able to appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let us talk about where you will do your woodworking, Depending on the size of your house, you may be able to produce a dedicated space into your woodworking activities. This might be a reserved spot in your garage or on your cellar. Sometimes, a detached shed or outbuilding might be ideal to prepare your very first shop. A heated shop detached from your house provides one distinct advantage: better dust control. Without complex dust control methods, basement workshops will inevitably produce dust which travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air yields found in the basement draw dust up into the top levels of the house. Another advantage of detached workshops would be, of course, the noise level. You can work without disturbing the remainder of the family. A good compromise could be the garage of your property.

This can help decrease the problems of dust and sound, however depending on where you live, a keyword garage layout might not be sensible during extremes of cold or hot weather.

How to Become a Master Woodworker From Your Own Home Free Wood Building Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they add more space to function in. Free Wood Building Plans if you’re able to have a dedicated place for a workshop all the greater. Floor tools and bench top equipment can stay in position from project to project. If this setup isn’t hopeless, at least attempt to make a chair area where equipment can be saved and pulled out as necessary. If possible plan for inevitable growth as you get more tools and equipment. In the beginning, set up a seat area where you are able to shop and use most of your gear, with a temporary expansion of your actions onto the garage or basement floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. That will let you work comfortably while standing. Insert a sturdy shelf below the seat to home your hand power tools along with a pegboard above the bench to hang additional equipment. Install a woodworking at one end of the seat on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Free Wood Building Plans

The reach of your startup equipment will be largely based on your budget. Whether you’ve got big financial resources or you are starting on a shoestring consistently buy quality gear. If you can afford it, then purchase your quality tools at the regional construction and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other regional ads. There are an abundance of quality lightly used tools out there that belong to people who embarked on that 1 molding job around the home or received tools as gifts which they will never utilize. You can usually buy tools for all these sellers for less than half of the initial cost and save even more money if you make a package deal for all their unused equipment. Of course, acquiring tools from private people will take additional time and possibly travel expenditures. Weigh out the advantages of traveling around town to save a few added dollars on a inexpensive piece of gear. The excess cost of time and travel in these scenarios is usually justified when purchasing large ticket items like table saws, bandsaws or large ended tools such as surface planers later on.
For smaller acquisitions, a visit to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum amount of hand gear yet generated sophisticated and intricate pieces. Focus on developing your skills with your start-up set of resources and prevent lamenting about the gear you wished you had.
Here is a listing of the useful tools you’ll need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Purchase a quality oil collection that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually hamper your vision and influence safety. Avoid wearing goggles in a workshop. Most impair eyesight and dust up fast. You can avoid wearing all of them together in the event that you find them uneasy.

The next bit of critical safety gear you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be long-term and noisy exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap with my ear muffs and eye protection. With this setup I’m shielding my eyes and my ears. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Frequently known as a skill saw following the favorite brand name, this can end up being the most versatile tool in a startup workshop. In fact, in the hands of a professional, a power hand saw could be employed to construct an entire house. At some point, you are going to want to buy a table saw, but for now, a power hand saw for the woodworker on a budget enables him to do cross cuts, rip cuts and even intricate angle cuts. As mentioned before get an excellent brand saw. Stay away from cheap unknown brands. These tend to cut back and will burn out before you start your second project. After choosing the proper saw install an excellent blade. Most skill saws include a starter blade of lower quality even if they’re a fantastic saw. Keep this blade as a backup and put in an excellent blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool can’t just cut corners. It’s perfect for cutting holes in wood too like manage slots. Eventually, you’re going to want to obtain a band saw. Bandsaws are much more versatile but a excellent floor unit could be expensive. A jigsaw may be a good stop gap to the novice woodworker.

Purchase an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch model. Down the road, the 1/2 inch version will prove to be more versatile. Through hard lessons learned, I have discovered that purchasing quality, in this case, is more crucial than ever. Cheaper drills tend to get very short run times and have to be recharged often. Their battery life tends to be poor and to make matters worse keyless chucks come loose and slide frequently. This is one annoyance you don’t want on your workshop. Purchase an assortment of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Make a habit of returning every drill piece to its potential slot in the holder after every use. Lastly, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile instrument in the shop, and often the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop accidents occur. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers usually have wood grips with inferior joints between the head and handle. The head usually comes loose and the instrument becomes useless. Pick a name brand quality hammer in the 16-ounce range for general work and also a smaller finishing hammer for more intricate work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These types of hammers are more appropriate for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can handle pretty much any sanding requirements you’ve got as a novice woodworker. As your woodworking skills evolve, you’ll likely update to a floor model disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited amounts of surface space. As you embark on the first few projects you might discover that your palm sander with just a bit of effort can transform rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and shape rough planks with 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets with an extra supply of 100 grit paper. You’ll find that this grade of paper that the most versatile in your store.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Though low tech in concept, these tools allow you to taper edges, sew high stains and fix any imperfections in wood pieces. {Begin with a standard amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold down your wood bits as you work on them. Unfortunately, good clamps are expensive and it normally takes the novice woodworker a few years to collect a detailed set of timber clamps. Start with a set of long”pipe” clamps. Today the pipe was replaced with long steel shafts, but the structure is still the same. Get a set of the longest clamps which you could afford. You can get in touch with them for smaller glue jobs and expand them to their entire length for larger jobs.

Shop Vice: A store vice installed at the end of your bench is perfect for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices with their timber clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer you quick release mechanisms that enabled the user to quickly open and close the jaws without dull handle rotation. The timber clamping surfaces in your vice will occasionally need replacement. I would rather use soft pine in my vices which will not crush or damage many of the various forests that I utilize. Whether I’m working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be one of the most often used tools. Buy a fantastic excellent name brand tape measure with a wide tape typically from the 25-foot selection. Even though in your store you may not use the tape at these spans, the bigger tape steps offer more rigid tapes that will not flop around and slip off the end of planks. Measuring when you’re on your own will be a great deal easier, and naturally, quality tape steps can last for several decades.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood. Avoid oversized carpenter’s pencils. Their big flat leads are simply too rough for precise measurement in the workshop.

Additional Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools will help you in marking the right angles in addition to compound angles. Also, get an range of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I discover that the Robertson format works great for many woodworking projects and is the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood documents. The cost of adhesive through all your jobs is a minor cost consideration. For that reason, it makes sense to decide on the best. I also have found over time that I receive the best results with both indoor and outdoor projects when I use quality outdoor grade adhesive. These resin-based compounds unlike traditional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Free Wood Building Plans

The peaceful satisfaction of woodworking is an excellent adventure in this day and age of hurried lives, smartphones, and time-starved livelihood. With a minimal investment in the most rudimentary tools and equipment, everyone can learn the profitable skills of his time-tested avocation and revel in job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

House

A house is a building that functions as a home. They can range from simple dwellings such as rudimentary huts of nomadic tribes and the improvised shacks in shantytowns to complex, fixed structures of wood, brick, concrete or other materials containing plumbing, ventilation, and electrical systems.[1][2] Houses use a range of different roofing systems to keep precipitation such as rain from getting into the dwelling space. Houses may have doors or locks to secure the dwelling space and protect its inhabitants and contents from burglars or other trespassers. Most conventional modern houses in Western cultures will contain one or more bedrooms and bathrooms, a kitchen or cooking area, and a living room. A house may have a separate dining room, or the eating area may be integrated into another room. Some large houses in North America have a recreation room. In traditional agriculture-oriented societies, domestic animals such as chickens or larger livestock (like cattle) may share part of the house with humans. The social unit that lives in a house is known as a household.

Most commonly, a household is a family unit of some kind, although households may also be other social groups, such as roommates or, in a rooming house, unconnected individuals. Some houses only have a dwelling space for one family or similar-sized group; larger houses called townhouses or row houses may contain numerous family dwellings in the same structure. A house may be accompanied by outbuildings, such as a garage for vehicles or a shed for gardening equipment and tools. A house may have a backyard or frontyard, which serve as additional areas where inhabitants can relax or eat.

The English word house derives directly from the Old English hus meaning "dwelling, shelter, home, house," which in turn derives from Proto-Germanic husan (reconstructed by etymological analysis) which is of unknown origin.[3] The house itself gave rise to the letter 'B' through an early Proto-Semitic hieroglyphic symbol depicting a house. The symbol was called "bayt", "bet" or "beth" in various related languages, and became beta, the Greek letter, before it was used by the Romans.[4]

Video: Woodworking Projects