Free Wood Craft Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable ideas and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and some of those attributes along with a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, himself is also an instructor and a member of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking whenever they are following because all the thoughts and projects Ted’s resource are easy to understand and simple. Ted McGrath spent two years researching so that he could collect enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking source.

Many might still seem unsure if they should be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it more difficult to make the ideal option. There are actually many things that set Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit from Ted’s woodworking Package. Those who are just getting started will discover the ideas and jobs in Ted’s bundle quite simple. No doubt, complicated carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s simple step by step instructions. Currently, both beginner and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that will help beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers are going to be able to locate any job of their choice within this bundle quite easily, even though there numerous options.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who buy it’ll be endorsed by a 60-day warranty, so when this woodworking bundle fails to satisfy them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long time to down because of its large size. Yet, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects at Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nonetheless, they didn’t mind being overwhelmed considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design bundle is so comprehensive and vast that it contains just about every woodworking project a woodworker might be considering building.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking packages that are available throughout the net. Ted has done his very best to guide them in every possible way he could, through simple to comprehend textual directions, clear pictures and even videos as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking projects they will find within. So, it is definitely worth buying!

Finding Woodworking Projects and Plans for Beginners Free Wood Craft Projects

Woodworking is 1 hobby that could also be a rewarding profession if you like to work together with your hands and build beautiful pieces of furniture from timber. When you learn that the woodworking crafts and eventually become a nice woodworking craftsman, you will be able to construct all kinds of furniture, (beds, table, and chairs), with ease. After that you can sell your finished woodworking jobs and make a handsome profit. Free Wood Craft Projects.

It requires time to become proficient in the craft of woodworking. The wonderful thing about working up to that expert craftsman degree is you will have the ability to build some really nice furniture to you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit on your living space. It’ll be a topic of conversation when you have friends come over to see. They’ll ask: How can you create it? How long can it take to finish the project? What type of tools did you use? How on earth did you create such a beautiful item of furniture? As you discuss your work, a sense of pride will encounter you and also don’t be surprised if your friends ask you to create one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Free Wood Craft Projects

If you are thinking you are too old or too young for woodworking, think again! You are never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to Begin in Woodworking? Free Wood Craft Projects.

Start with a concept in mind of what you want to build then get a excellent woodworking project plan that’s geared toward novices. There are several small woodworking projects for novices available for sale from online woodworking merchants. Of course, you can start out with as expansive a woodworking plan as you pick. On the other hand, the odds are if you start out with a little woodworking project at first, you will have a better chance of keyword completing the project.

Your woodworking project plan should incorporate some lists! Length of: woodworking hardware, the amount and type of wood required, and the essential hand tools and power tools to finish the project. Note: A word of warning about purchasing woodworking tools. Only buy what you want to complete your immediate or upcoming project. This is important especially if you are a beginner and just starting out. Tools aren’t affordable. The beginner needs good woodworking tools, but it is simple to break the bank purchasing a great deal of tools you may not use all that often. When you do buy gear, buy quality. Do a bit of research and compare products. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking clamps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not forget the wood glue and a brush to spread the wood adhesive! Of course, you’ll need a dry place to work and may need a set of saw horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more innovative hand tools and much more woodworking power tools , but the idea is to purchase the crucial hand and power tools that novices will need. You may always increase your arsenal as you gain experience!

Free Wood Craft Projects Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to finish your project. However, if you are unsure about what to do there is help available! There are lots of places that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of the several woodworking magazines out there. Each month the writers in woodworking magazines do a story about how best to improve your woodworking craft. When it’s showing you how to apply an end to a finished project, or how to make a mortise and tenon joint, something new can be learned each month. Next, is purchasing instructional DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to work with a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Free Wood Craft Projects

If you are a beginner and very enthusiastic about doing a DIY job for house afterward, woodworking could be interesting. If you don’t have the proper information, education, and ability, you may land up spending more time and money than you originally intended to spend. As a novice woodworker, you want to have space, time and the appropriate tools. Having mentioned, there are a couple of essential aspects you need to keep in mind, before starting with any woodworking project.

1. If you’re just beginning, you must first have to be somewhat interested in woodworking. Creating something new with your hands is a special sense. Don’t start a project if you are not interested, because this might land you at a bad location.

2. Think of the primary reason behind making this woodworking project. Choose the uses of the item you are making.

3. Consider your skills and examine the time that you have, until you begin with a job.

4. Start jobs that you can complete. If you are in the midst of a work, then it’s wise to not start any project in any way.

Starting Your First Woodworking Shop Free Wood Craft Projects

If you maintain those essential things in mind before you begin a woodworking project, it will become very simple for you to achieve success. Woodwork requires preparation as much as it takes effort. So how do you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to opt for the woodworking jobs that you wish to start with. As a beginner, always select a job which has quite a basic construct up or a very simple construction. Some simple to start projects include, bird feeder, chairs, shelves, etc.. The moment you find these techniques, you could always proceed to the next level of woodworking projects, such as cupboards, sheds, along with others. Beginning jobs should keyword be complicated and less frustrating so that you have a better comprehension of working with forests and their tools. Once the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Free Wood Craft Projects

Tools are the means whereby you can win the battle of woodworking. A lot of people think that power tools are needs. However, for beginners, basic hand tools can be quite convenient and more than helpful in completing a project. If woodworking is the hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for precise cuts and dimensions. The workbench, when fixed with vises, offer ample space to work. As a primary tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make matters considerably easy for you. When you buy a hammer, constantly check the equilibrium between the weight and endure. Always pick a hardy, yet lightweight item.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws out there on the market. Choose a size that you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Having all of them will help you in advance woodworking. You might even purchase keyword power screwdrivers since they make the job much quicker.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape gives you the capacity to measure wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you require a wrench. Nonetheless, this is not a tool for beginners, but having it might make work simpler for you at a later stage.

7. Drill – Drill makes it possible to make holes in timber. Power drills are more useful but they cost more. Low wattage power drills will make the job much easy.

8. Other small and fundamental tools – These include pencils, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is not any fixed price on woodworking jobs. Dependent on the type of job you would like to complete, pricing could be set. The simple the job, the less price it involves. However, at the very beginning purchasing the tools will probably be somewhat hefty. Because of this, it’s better to resolve a budget on the tools, then keyword on the project. Buying the basic tools will make certain you do not need to purchase any more material other than the wood ply.

Time and Directions

Instructions are among the principal things that each and every beginner should follow. Instructions guide is quite easy to comprehend the procedure, what to do and how to do it. Time also plays an important part in the building of woodworking jobs. Woodworking projects require time and therefore it’s crucial for a novice to have ample quantity of time weekly.

Ideas for Beginners

There aren’t any quick tips or suggestions that will make the work easy. But the most essential thing keyword which will help you to reach success is proper planning. With appropriate planning and a strategy, it’s likely to achieve success quickly. If you understand the purpose of woodworking, the thing that you want to build, the tools you require in order to own and the typical time you can give daily; then you’re ready to go.

Conclusion, Free Wood Craft Projects

These tips and education will create the woodworking projects and strategies for novices quickly to complete. Always make sure you have all the essential tools, materials, area ready. Read the instructions for building a product handy. Proper strategy and preparation can help you to earn a great woodworking job for your home.

|

Starting Your First Woodworking Shop Free Wood Craft Projects

People when looking for a way to pass time or desire an alternative method to make money they generally turn to a hobby they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based company. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are a lot of jobs one can consider. When starting out you have to be very careful when choosing which job to begin with because there are projects that may be too tough for a beginner. But don’t worry about that since we are going to give you tips on the right means to start woodworking as a beginner.

The same as any other hobby woodworking demands some working equipment, therefore before you pick your job you have to know if you have the available tools to work on such a job. Try not to invest a lot of money on buying equipment when starting out, purchase more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no difference between the hand as well as the hands.

Starting Your First Woodworking Shop Free Wood Craft Projects

Woodworking in your home will provide you time to research unique projects and find out a lot of things. That’s why it’s very important to invest less money when starting out so you can manage to make mistakes and at any time learning about different jobs.
It’s very important you know about the different kinds of wood available for making jobs. Anticipate carpenters use several kinds of wood quality for decorating bits, learning what type of wood they use will allow you to prepare the wood you will need for certain jobs you may want to pursue.
As soon as you know the basics of wood choice and the use of different tools you can now employ them in cutting out well wood pieces and putting wood together. Knowing what to do will assist you in building good projects to satisfy your wants.

Free Wood Craft Projects practice makes perfect so make sure that you practice your work daily if at all possible. Try out a lot of layouts utilizing a variety of tools so you may get the hang of using the tools. When starting out you may earn a number of errors but with time you will learn how to correctly use them and create quality projects.

|

Starting Your First Woodworking Shop Free Wood Craft Projects

Woodworking as a hobby can be among the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimal amount of gear and equipment. A little home workshop can generate a wide array of simple projects which can help you develop your creative and construction skills while rewarding you with practical and artistic wood products which you are able to appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let us talk about where you will perform your woodworking, Depending on the dimensions of your home, you might be able to create a dedicated space to your woodworking tasks. This may be a reserved spot on your garage or on your cellar. Sometimes, a detached shed or outbuilding may be ideal to prepare your very first shop. A heated shop detached from your house provides one distinct advantage: better dust control. Without complex dust control methods, basement workshops will inevitably create dust that travels into the living area of your house. This is particularly true in homes with forced air heating systems in which cold air returns found in the basement draw up dust into the top levels of the house. Another advantage of detached workshops would be, of course, the sound level. You can work without bothering the remainder of the household. A good compromise might be the garage of your property.

This can help minimize the difficulties of dust and noise, however based on where you live, a keyword garage workshop may not be practical during extremes of hot or cold weather.

Starting Your First Woodworking Shop Free Wood Craft Projects

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes that they include more space to work in. Free Wood Craft Projects if you can have a dedicated place for a workshop all the better. Floor tools and bench top equipment can remain in position from project to project. If this setup isn’t hopeless, at least attempt to make a chair area where equipment can be saved and pulled out as necessary. If possible plan for inevitable growth as you get more tools and gear. In the start, establish a bench area where you can store and use most of your gear, using a temporary expansion of your activities onto the basement or garage floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. Add a sturdy shelf beneath the bench to home your hands power tools and a pegboard over the seat to hang additional gear. Install a woodworking vice at one end of your seat on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Free Wood Craft Projects

The scope of your start-up equipment will be largely based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring always purchase quality gear. If you can afford it, buy your quality tools in the local construction and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or other regional advertisements. There are plenty of quality gently used programs out there that belong to individuals who stumbled on that one molding project around the house or received tools as gifts that they won’t ever use. You can usually purchase tools for all these sellers for less than half of the original cost and save even more money if you make a package deal for all their unused equipment. Of course, acquiring tools from private people will take additional time and possibly travel expenditures. Weigh the advantages of traveling across town to save a couple extra bucks on a cheap piece of equipment. The extra expense of time and travel in these scenarios is generally justified when buying large ticket items like table saws, bandsaws or large ended tools like surface planers later on.
For smaller acquisitions, a visit to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimum amount of hand gear yet produced sophisticated and intricate bits. Concentrate on developing your abilities with your start-up set of resources and avoid lamenting about the equipment you wished you had.
Here’s a listing of the useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses that also offer some side protection to your eyes. Buy a quality oil collection that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually impair your vision and influence security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next piece of crucial safety equipment that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking may be noisy and long-term exposure to these noise levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap with my ear muffs and eye protection. I am keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw following the favorite name, this may end up being the most versatile instrument in a startup workshop. In reality, in the hands of an expert, a power hand saw could be used to construct an entire property. At some point, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a budget empowers him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your second job. After choosing the proper saw put in an excellent blade. Most skill saws include a starter blade of lower quality even if they’re a fantastic saw. Keep this blade as a backup and install an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool can’t just cut curves. It is ideal for cutting holes in wood too like handle slots. Eventually, you’re going to want to get a ring saw. Bandsaws are much more versatile but a quality floor unit could be costly. A jigsaw can be a good stop gap to the novice woodworker.

Purchase an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the standard 3/8 inch version. Through tough lessons learned, I have discovered that buying quality, in this scenario, is much more critical than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their battery life tends to be bad and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you do not want in your workshop. Buy an range of quality carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning every drill bit to its prospective slot at the holder after every use. Lastly, get a set of hard steel driver bits. Your drill may also be a flexible screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer remains as the most flexible tool in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop accidents happen. Even though the most ordinary, hammer injuries are often of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and features a comfortable grip. Most hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers usually have wood handles with inferior joints between the handle and head. The head typically comes loose and the instrument becomes useless. Pick a name brand quality hammer at the 16-ounce range for general work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate for rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can handle pretty much any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you will likely upgrade to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander can clean up borders, cross cuts and even limited amounts of surface area. As you embark on your first few projects you might discover your palm sander with just a little bit of effort can change rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and form rough boards with 100 grit paper and later finish your job with 200 or 300 grit paper. Buy an range of sandpaper sheets using an extra source of 100 grit paper. You’ll find that this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Although low tech in theory, these tools enable you to taper borders, flatten high spots and fix any imperfections in timber pieces. {Start with a typical amount 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold down your wood pieces as you work on them. Unfortunately, good clamps are costly and it normally requires the novice woodworker a couple of years to accumulate a detailed set of wood clamps. Begin with a pair of long”pipe” clamps. Today the pipe was replaced with long steel shafts, but the structure is still the same. Get a set of the longest clamps that you can spend. You may get in touch with them for smaller adhesive jobs and enlarge them to their full length for larger projects.

Shop Vice: A shop vice installed at the end of the bench is perfect for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enabled the consumer to rapidly open and close the limbs with no tedious handle rotation. The wood clamping surfaces on your vice will periodically require replacement. I prefer to use soft walnut in my vices that won’t crush or damage lots of the various woods that I utilize. Whether I am working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be among your most often used tools. Buy a fantastic quality name brand tape measure with a broad tape typically in the 25-foot range. Even though in your shop you might not use the tape at these lengths, the larger tape measures provide more rigid tapes which won’t flop around and slide off the end of planks. Assessing when you are on your own will be a great deal simpler, and of course, quality tape measures can endure for several years.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood. Avoid oversized carpenter’s pencils. Their large flat leads are just too rough for precise measurement in the workshop.

Other Tool and Materials: Here are a few other handy tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools can help you in marking the right angles as well as chemical angles. Also, get an assortment of flat, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I discover the Robertson format works best for many woodworking jobs and is the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood documents. The expense of adhesive through all your projects is a little cost consideration. For that reason, it is sensible to decide on the best. I have also discovered over time that I receive the best results with both indoor and outdoor jobs when I use quality outside grade glue. These resin-based compounds unlike traditional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Free Wood Craft Projects

The peaceful gratification of woodworking is a wonderful experience in this day and age of rushed lives, smartphones, and time-starved livelihood. With a minimum investment in the most rudimentary equipment and tools, anyone can learn the rewarding skills of his time-tested avocation and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Handicraft

A handicraft, sometimes more precisely expressed as artisanal handicraft or handmade, is any of a wide variety of types of work where useful and decorative objects are made completely by hand or by using only simple tools. It is a traditional main sector of craft, and applies to a wide range of creative and design activities that are related to making things with one's hands and skill, including work with textiles, moldable and rigid materials, paper, plant fibers, etc. One of the world's oldest handicraft is Dhokra; this is a sort of metal casting that has been used in India for over 4,000 years and is still used. Usually the term is applied to traditional techniques of creating items (whether for personal use or as products) that are both practical and aesthetic.Handicraft industries are those that produces things with hands to meet the needs of the people in their locality.Machines are not used.[1][2][3]

Collective terms for handicrafts include artisanry, handicrafting, crafting, handicraftsmanship and handcrafting. The term arts and crafts is also applied, especially in the United States and mostly to hobbyists' and children's output rather than items crafted for daily use, but this distinction is not formal, and the term is easily confused with the Arts and Crafts design movement, which is in fact as practical as it is aesthetic.

Handicrafting has its roots in the rural crafts—the material-goods necessities—of ancient civilizations, and many specific crafts have been practiced for centuries, while others are modern inventions, or popularizations of crafts which were originally practiced in a limited geographic area.

Video: Woodworking Tools