Free Wood Plans Download | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities along with a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, she’s also an instructor and a member of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking when they’re after because all the ideas and projects Ted’s source are simple to comprehend and simple. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive package, and he ended up creating a really’complete’ woodworking resource.

Many may still seem unsure whether they need to be buying Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it even more challenging to make the right choice. There are in fact lots of things that place Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit out of Ted’s woodworking Package. People that are only getting started will find the ideas and jobs in Ted’s bundle quite easy. No doubt, complicated carpentry is demanded; nonetheless, they will discover that it’s really easy to follow Ted’s simple step-by-step directions. Presently, both novice and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who buy his package, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a whole lot about woodworking. They will also have the ability to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will be able to locate any project of their choice within this package quite easily, though there so many options.

60-Day Iron Clad Money Back Guarantee

In general, this product is and people who purchase it’ll be endorsed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long period to down because of its large dimensions. Yet, using a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects in Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overrun considering how this package is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design package is so thorough and vast that it contains pretty much every woodworking project a woodworker may be considering constructing.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that can be found across the net. Ted has done his best to direct them in every conceivable way he can, through easy to comprehend textual directions, clear images and even videos too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking projects they will find within. So, it’s definitely worth buying!

How to Become a Master Woodworker From Your Own Home Free Wood Plans Download

Woodworking is one hobby that can also be a rewarding profession if you love to work with your hands and build exquisite pieces of furniture from wood. When you learn the woodworking crafts and become a nice woodworking craftsman, you’ll have the ability to construct all types of furniture, (beds, table, and chairs), with ease. You can then sell your finished woodworking projects and make a handsome profit. Free Wood Plans Download.

It requires time to become skilled in the craft of woodworking. The nice thing about working up to this expert craftsman level is you’ll have the ability to create some really wonderful furniture to you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit on your living space. It’ll be a topic of conversation whenever you have friends come over to visit. They’ll ask: How can you make it? How long did it take to complete the job? What type of wood did you use? What type of tools did you use? Just how on earth did you create such a beautiful item of furniture? As you discuss your job, a sense of pride will encounter you and also do not be surprised if your friends ask you to create one for them too!

How to Become a Master Woodworker From Your Own Home Free Wood Plans Download

If you are thinking you are too old or too young for woodworking, then think again! You’re never too old or too young for such a fun hobby and it is ideal for beginners!

Where to begin in Woodworking? Free Wood Plans Download.

Start with a concept in your mind of what you would like to build then get a really good woodworking project plan that is geared toward beginners. There are several little woodworking projects for novices available for sale from online woodworking merchants. A few woodworking plan suggestions to get you thinking really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid simply to name a few. Obviously, you can begin with as expansive a woodworking plan as you pick. However, the odds are if you start out with a small woodworking project at first, you’ll get a better prospect of keyword completing the project.

Your woodworking project plan should incorporate some lists! Lists of: woodworking hardware, the amount and type of wood required, and the essential hand tools and power tools to finish the undertaking. Note: A word of warning about purchasing woodworking tools. Only buy what you need to finish your immediate or upcoming project. This is important especially if you are a beginner and just starting out. Tools are not cheap. The newcomer needs good woodworking gear, but you can easily break the bank buying a lot of tools you may not use all that frequently. If you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you can afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, flat and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and do not overlook that the wood glue and a brush to spread the wood adhesive! Obviously, you’ll need a dry area to work and may need a set of saw horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more woodworking hand tools and more woodworking power tools here, but the concept is to purchase the crucial hand and power tools which novices will need. You can always increase your toolbox as you gain experience!

Free Wood Plans Download Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to finish your project. However, if you are unsure about what to do there is help available! There are lots of areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of the many woodworking magazines available. Every month the authors in woodworking publications do a story about the best way to improve your woodworking craft. Whether it’s showing you the way to apply a finish to a finished job, or how to create a mortise and tenon joint, something new can be learned each month. Next, is buying instructional DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to work with a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Free Wood Plans Download

If you’re a beginner and very enthusiastic about doing a DIY job for house afterward, woodworking can be fun. If you don’t have the proper information, education, and ability, you might wind up spending more time and money than you initially meant to spend. As a novice woodworker, you need to have space, time and the appropriate tools. Having said, there are a couple of essential aspects you need to remember, before starting with any woodworking project.

1. If you’re a beginner, you should first need to be somewhat interested in woodworking. Making something new with your own hands is a special feeling. Don’t begin a project if you’re not interested, as this may land you at a bad location.

2. Think of the primary reason for creating this woodworking project. Choose the uses of this item you’re making.

3. Consider your skills and examine the time that you have, until you begin with a job.

4. Start projects that you’re able to complete. If you’re in the midst of some work, then it is wise not to start any project at all.

How to Become a Master Woodworker From Your Own Home Free Wood Plans Download

If you maintain these essential points in mind before you begin a woodworking project, it will become very simple for you to reach success. Woodwork requires planning as much because it takes effort. So how do you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking jobs that you want to begin with. As a beginner, always select a job which has a very basic construct up or a simple structure. Some easy to begin projects include, bird feeder, benches, shelves, etc.. As soon as you find these techniques, you can always proceed into the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning projects should keyword be complicated and less bothersome so that you have a better knowledge of working with forests and their tools. When the project is selected, start selecting your tools.

Beginners Woodworking Tools, Free Wood Plans Download

Tools are the means whereby you can win the battle of woodworking. Many people think that power tools are needs. However, for novices, basic hand tools can be very convenient and more than useful in completing a job. If woodworking is the hobby, then some tools that you would demand are:

1. Workbench – A workbench is required for precise cuts and dimensions. Even the workbench, when fixed with vises, offer ample space to work. As a primary tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer can make matters much easy for you. When you buy a hammer, constantly assess the equilibrium between the weight and stand. Always pick a hardy, yet lightweight product.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool helps you to cut woods at different sizes. There are various sorts of saws out there on the market. Decide on a size which you could handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Possessing all of them can help you ahead of time woodworking. You can also purchase keyword energy screwdrivers as they make the job much quicker.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape gives you the capacity to measure wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you require a wrench. Nonetheless, this isn’t a tool for beginners, but using it might make work simpler for you in a later stage.

7. Drill – Drill helps you create holes in timber. Low wattage power drills will make the job much easy.

8. Other small and fundamental tools – These include pencils, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed cost on woodworking projects. Based on the sort of job you would like to complete, pricing could be determined. The simple the job, the less price it involves. But at the very beginning buying the tools will be somewhat hefty. Therefore, it’s much better to resolve a budget on the resources, then keyword on the project. Buying the fundamental tools will make certain you do not have to purchase any more material other than the wood ply.

Time and Instructions

Directions are among the principal things which each and every newcomer should follow. It is like the woodworking Bible. Instructions manual is very easy to understand the process, what to do and the way to do it. It keyword is a systematic manual for completing the job. Time also has a significant role in the building of woodworking projects. Woodworking projects demand time and so it is crucial for a beginner to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most essential thing keyword which can help you to reach success is proper preparation. With proper planning and a strategy, it’s possible to achieve success quickly. If you understand the purpose of woodworking, then the item you want to build, the resources you require to possess and the typical time it’s possible to give daily; then you’re all set to go.

Conclusion, Free Wood Plans Download

All these tips and education will create the woodworking projects and strategies for beginners quickly to complete. Always make sure that you have all of the vital tools, materials, space prepared. Read the instructions for building a product handy. Appropriate strategy and planning can help you to earn a fantastic woodworking job for your home.

|

Finding Woodworking Projects and Plans for Beginners Free Wood Plans Download

People when trying to find a way to pass time or want an alternative method to generate money they usually turn into a hobby they enjoy. Woodworking is one of the hobbies people turn to do as a hobby or home based business. It’s very exciting to do and everyone can get started.

When doing woodworking at home there are a lot of jobs one can think of. When starting out you need to be very cautious when choosing which job to start out with because there are jobs that can be too difficult for a beginner. But do not worry about that because we are going to give you guidelines on the ideal way to start woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, so before you choose your job you need to know whether you have the available resources to work on such a job. Try not to invest a lot of money on buying gear when starting out, purchase more gear as you get more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any gap between the hand and the normal hands.

Starting Your First Woodworking Shop Free Wood Plans Download

Woodworking in your home will give you time to explore unique jobs and find out so many things. That is why it’s important to spend less money when starting out so you can afford to make mistakes and at any time learning about different jobs.
It is very important that you know more about different types of wood available for making jobs. Anticipate carpenters utilize several kinds of wood quality for decorating pieces, learning which kind of wood that they use can allow you to prepare the wood you’ll need for certain projects you may want to pursue.
As soon as you understand the basics of wood selection and the usage of different tools now you can employ them in cutting out well wood pieces and placing wood together. Knowing what to do will assist you in creating good projects to fulfill your needs.

Free Wood Plans Download practice makes perfect so be sure that you practice your work daily if possible. Try out a lot of layouts using various tools so that you can get the hang of using the tools. When starting out you may make a number of errors but with time you will find out how to correctly use them and produce quality projects.

|

How to Become a Master Woodworker From Your Own Home Free Wood Plans Download

Woodworking as a hobby can be one of the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimal number of gear and equipment. A little home workshop may generate a wide array of simple projects which will help you develop your creative and building skills while rewarding you with artistic and practical wood products that you can appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let’s discuss where you’ll do your woodworking, Depending on the size of your house, you might be able to produce a dedicated space into your woodworking activities. This might be a reserved place on your garage or on your cellar. In some cases, a detached shed or outbuilding may be ideal to prepare your first store. A heated store detached from your house offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably create dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems in which cold air returns found in the cellar draw up dust into the upper levels of the house. Another benefit of detached workshops would be, clearly, the noise level. It’s possible to work without disturbing the remainder of the family. A good compromise could be the garage of your property.

This might help decrease the difficulties of dust and noise, however depending on where you reside, a keyword garage workshop might not be practical during extremes of hot or cold weather.

Finding Woodworking Projects and Plans for Beginners Free Wood Plans Download

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes they add more space to work in. Free Wood Plans Download if you’re able to have a dedicated spot for a workshop all the greater. Floor gear and bench top equipment can stay in position from project to project. If this installation is not hopeless, at least try to create a bench area where equipment can be stored and pulled out as needed. If at all possible plan for inevitable growth as you acquire more tools and gear. At the start, establish a bench area where you can store and use the majority of your equipment, using a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. This will enable you to work comfortably while standing. Add a sturdy shelf below the bench to house your hands power tools along with a pegboard over the seat to hang other gear. Put in a woodworking at one end of your seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Free Wood Plans Download

The reach of your start-up equipment will be mostly based on your budget. Whether you have got big financial resources or you’re starting on a shoestring always purchase quality equipment. If you can afford it, then purchase your quality tools in the regional building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or other local ads. You will find plenty of quality gently used tools out there which belong to people who embarked on that one molding job around the home or received tools as gifts which they will never utilize. You can usually purchase tools for all these sellers for under half of the original price and save even more money should you make a package deal for all their unused equipment. Obviously, acquiring tools from private people will require extra time and possibly travel expenditures. Weigh the advantages of traveling around town to save a few added dollars on a inexpensive piece of gear. The extra cost of time and travel in these scenarios is usually justified when buying large ticket items such as table saws, bandsaws or large ended tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimal quantity of hand equipment yet produced sophisticated and complex bits. Concentrate on developing your skills with your start-up set of tools and avoid lamenting about the equipment you wished you’d.
Here is a checklist of the more useful tools You Will Need to get started:
Safety Gear: Start as anticipated with eye protection. Get a decent pair of safety glasses which also offer you some side protection to your eyes. Buy a quality acrylic collection that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually impair your vision and affect security. Avoid wearing gloves in a workshop. Most impair eyesight and dust up quickly. You can avoid wearing them all together if you find them uncomfortable.

The next bit of critical safety equipment that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking can be long-term and noisy exposure to those sound levels may affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire faster when subjected to high noise levels. Last, wear a cap to keep the dust out of your hair. I prefer a very simple ball cap along with my ear muffs and eye protection. With this set up I’m protecting my eyes and my ears. I am keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw following the favorite name, this can prove to be the most versatile tool in a startup workshop. In reality, in the hands of a professional, a power hand saw could be used to build an whole house. As mentioned earlier get an excellent manufacturer saw. Avoid cheap unknown brands. These tend to cut back and will burn out before you even start your next project. After selecting the proper saw put in an excellent blade. Most skill saws come with a starter blade of lower quality even if they’re a good saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Begin with a hybrid blade. These possess a balanced tooth count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument cannot just cut curves. It’s perfect for cutting holes in timber also like manage slots. Eventually, you’re going to want to obtain a ring saw. Bandsaws are even more flexible but a excellent floor unit could be expensive. A jigsaw may be a good stop gap to the novice woodworker.

Purchase an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck over the standard 3/8 inch model. Down the road, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have discovered that buying quality, in this scenario, is more critical than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their battery life tends to be poor and to make things worse keyless chucks come loose and slip often. This is one annoyance you don’t need on your workshop. Purchase an range of superior carbide tipped drill bits that are stored in a holder tagging each drill bit size. Create a habit of returning every drill bit to its prospective slot at the holder after every use. Lastly, get a set of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer stays as the most versatile tool in the store, and frequently the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop injuries occur. Even though the most ordinary, hammer accidents are often of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The good hammer is balanced, does not rust and comes with a comfortable grip. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers usually have wood handles with inferior joints between the handle and head. The mind usually comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce range for overall work and a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and any with dimpled head tips. These kinds of hammers are more appropriate for rough framing tasks and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can manage pretty much any sanding requirements you have as a beginner woodworker. As your woodworking skills evolve, you’ll probably upgrade to a floor model disc and belt sander. However, for now, the ever-versatile palm sander can clean up edges, cross cuts and even limited quantities of surface area. As you embark on the first few projects you might find that your palm sander with just a little bit of effort can transform rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and shape rough boards using 100 grit paper and after finish your job with 200 or 300 grit paper. Purchase an range of sandpaper sheets using an extra supply of 100 grit paper. You’ll get this grade of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Though low tech in concept, these tools allow you to taper edges, flatten high spots and correct any imperfections in wood pieces. {Start with a typical amount 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold down your wood pieces as you operate on them. Unfortunately, superior clamps are costly and it usually takes the beginner woodworker a few years to collect a comprehensive set of timber clamps. Begin with a set of extended”pipe” clamps. Today the pipe has been replaced with long steel shafts, however, the structure remains the same. Receive a pair of the longest clamps that you could afford. You can get in touch with them for smaller glue jobs and expand them to their full length for bigger projects.

Shop Vice: A shop vice installed in the end of the seat is perfect for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the greater vices offer you rapid release mechanisms that enable the consumer to rapidly open and close the limbs with no tedious handle turning. The timber clamping surfaces in your vice will periodically require replacement. I prefer to use soft pine in my vices that will not crush or damage many of the different forests that I utilize. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of the most frequently used tools. Buy a good excellent name brand tape measure with a wide tape typically in the 25-foot selection. Although in your store you may not be using the tape in these lengths, the bigger tape measures provide more rigid tapes which won’t flop around and slide off the end of planks. Measuring when you are on your own will be a great deal easier, and of course, quality tape steps can last for many years.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will need extra sanding. Avoid oversize carpenter’s pencils. Their large flat leads are just too rough for precise measurement in the workshop.

Additional Tool and Materials: Here are a few other useful tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools will assist you in marking the ideal angles as well as chemical angles. Get the number two and three Robertson set. I find the Robertson format works best for most woodworking projects and is the most compatible with a drill powered bits. Last, get a set of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them ideal for rough shaping and fixing little mistakes on the way.

Adhesives: Not all glues are made equal. Stay away from cheap home brands marketed as carpenter’s glue. The expense of adhesive through all your jobs is a little cost consideration. For that reason, it is sensible to go with the best. I have also found over the years that I get the best results with both indoor and outdoor jobs when I use quality outside grade glue. These resin-based compounds unlike traditional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Free Wood Plans Download

The peaceful gratification of woodworking is a wonderful experience in this era of rushed lives, smart phones, and time-starved careers. With a minimal investment in the most rudimentary equipment and tools, anyone can learn the rewarding abilities of his time-tested avocation and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Google Drive

Google Drive is a file storage and synchronization service developed by Google. Launched on April 24, 2012, Google Drive allows users to store files on their servers, synchronize files across devices, and share files. In addition to a website, Google Drive offers apps with offline capabilities for Windows and macOS computers, and Android and iOS smartphones and tablets. Google Drive encompasses Google Docs, Google Sheets, and Google Slides, which are a part of an office suite that permits collaborative editing of documents, spreadsheets, presentations, drawings, forms, and more. Files created and edited through the office suite are saved in Google Drive.

Google Drive offers users 15 gigabytes of free storage through Google One. Google One also offers 100 gigabytes, 200 gigabytes, 2 terabytes, 10 terabytes, 20 terabytes, and 30 terabytes offered through optional paid plans. Files uploaded can be up to 5 terabytes in size. Users can change privacy settings for individual files and folders, including enabling sharing with other users or making content public. On the website, users can search for an image by describing its visuals, and use natural language to find specific files, such as "find my budget spreadsheet from last December".

The website and Android app offer a Backups section to see what Android devices have data backed up to the service, and a completely overhauled computer app released in July 2017 allows for backing up specific folders on the user's computer. A Quick Access feature can intelligently predict the files users need.

Video: Woodworking Tools