Free Woodworking Design Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and some of those attributes alongside a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, himself is also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking whenever they’re following because all the thoughts and projects Ted’s resource are simple to comprehend and simple. Ted McGrath spent two years researching so that he could gather enough material for an extensive bundle, and he ended up making a really’complete’ woodworking resource.

Many might still seem unsure if they should be buying Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it even more difficult to make the right choice. There are actually lots of things that place Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit from Ted’s woodworking Package. People that are just getting started will find the ideas and projects in Ted’s package quite simple. Without doubt, complicated carpentry is demanded; nonetheless, they will find it really simple to follow Ted’s easy step-by-step directions. Currently, both beginner and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who purchase his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a whole lot about woodworking. They will also have the ability to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers are going to have the ability to locate any project of their choice in this bundle quite easily, even though there numerous choices.

60-Day Iron Clad Money-back Guarantee

In general, this item is and people who buy it’ll be endorsed by a 60-day guarantee, so if this woodworking package fails to satisfy them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down because of its large dimensions. Nonetheless, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nevertheless, they didn’t mind being overrun considering how this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so comprehensive and vast it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking bundles that are available across the net. Ted has done his very best to guide them in every conceivable way he could, through easy to understand textual directions, clear pictures and even movies too.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking jobs they will find inside. Therefore, it’s definitely worth buying!

Starting Your First Woodworking Shop Free Woodworking Design Plans

Woodworking is 1 hobby that could also be a rewarding profession if you love to work with your hands and construct beautiful pieces of furniture from timber. When you learn the woodworking crafts and eventually become a nice woodworking craftsman, you will be able to build all kinds of furniture, (beds, table, and chairs), with ease. You can then sell your completed woodworking jobs and make a handsome profit. Free Woodworking Design Plans.

It requires time to become skilled in the craft of woodworking. The nice thing about working up to this expert craftsman degree is you’ll be able to create some really wonderful furniture for you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit in your living space. It’ll be a subject of conversation when you have friends come over to visit. They’ll ask: How can you create it? How long can it take to finish the project? What kind of wood did you use? What type of tools did you use? How on earth did you make such a gorgeous piece of furniture? As you discuss your job, a sense of pride will come over you and do not be surprised if your friends ask you to make one for them too!

Starting Your First Woodworking Shop Free Woodworking Design Plans

If you are thinking you are too old or too young for woodworking, think again! You are never too old or too young for such a fun hobby and it’s perfect for beginners!

Where to Begin in Woodworking? Free Woodworking Design Plans.

Start with a concept in mind of what you would like to construct then get a excellent woodworking project plan that’s geared toward beginners. There are several little woodworking projects for novices available for sale from online woodworking retailers. A few woodworking program suggestions to get you thinking are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid just to name a few. Obviously, you can begin with as grand a woodworking program as you pick. On the other hand, the odds are if you start out using a little woodworking project at first, you’ll get a better chance of keyword finishing the job.

Your woodworking project plan should include some lists! Lists of: woodworking equipment, the quantity and variety of wood required, and the required hand tools and power tools to finish the project. Note: A word of warning about buying woodworking tools. Just buy what you want to complete your immediate or upcoming project. This is important especially if you’re a beginner and just beginning. Tools are not cheap. The newcomer needs good woodworking gear, but it is simple to break the bank purchasing a lot of tools you may not use all that often. If you do buy tools, buy quality. Do a bit of research and compare goods. Buy the best that you could afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, finish punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking clamps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also do not overlook the wood glue and a brush to spread the wood glue! Obviously, you will need a dry place to work and might need a pair of saw horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of substance and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and more woodworking power tools here, but the concept is to buy the essential hand and power tools which novices will need. You may always add to your arsenal as you get experience!

Free Woodworking Design Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you have bought your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to complete your project. But if you are not certain about what to do there is help available! There are several areas that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Every month the writers in woodworking magazines do a story on how to increase your woodworking craft. When it’s showing you how you can apply an end to a completed job, or how to make a mortise and tenon joint, something new could be heard each month. Next, is buying educational DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Free Woodworking Design Plans

If you are a beginner and very enthusiastic about doing a DIY project for house afterward, woodworking could be fun. If you don’t have the right information, instruction, and ability, you may land up spending more money and time than you initially meant to spend. As a novice woodworker, you need to have time and the correct tools. Having mentioned, there are a few essential factors that you should keep in mind, before starting with any woodworking project.

1. If you are a beginner, you must first have to be somewhat interested in woodworking. Making something new with your own hands is a particular sense. Don’t start a job if you’re not interested, as this may land you at a bad place.

2. Think of the primary reason for making this woodworking project. Decide on the uses of the thing you are making.

3. Consider your skills and analyze the time that you have, until you start with a job.

4. Start jobs that you can complete. If you’re in the midst of some work, then it is wise to not start any project at all.

Starting Your First Woodworking Shop Free Woodworking Design Plans

If you keep those vital things in mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires planning as much because it takes effort. So how can you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to choose the woodworking jobs that you want to begin with. As a beginner, always pick a job which has a very basic build up or a very simple construction. Some easy to begin projects include, bird feeder, benches, shelves, etc.. The moment you get hold of the techniques, you could always move to the next level of woodworking jobs, like cabinets, sheds, along with others. Beginning projects should keyword be complicated and less frustrating so you have a better comprehension of working with forests and their tools. When the job is selected, start selecting your tools.

Beginners Woodworking Tools, Free Woodworking Design Plans

Tools are the ways whereby you will win the battle of woodworking. A lot of men and women think that power tools are needs. However, for novices, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is your hobby, then some tools that you would require are:

1. Workbench – A workbench is needed for exact cuts and dimensions. Even the workbench, when fixed with vises, offer ample space to work. As a key tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer will make things much easy for you. When you buy a hammer, constantly check the balance between the weight and endure. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool helps you to cut woods at different sizes. There are various sorts of saws out there on the marketplace. Choose a size which you could handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them will help you in advance woodworking. You might also purchase keyword energy screwdrivers as they make the work much faster.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape gives you the capacity to measure wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you demand a wrench. However, this is not a tool for beginners, but using it might make work easier for you in a later stage.

7. Drill – Drill helps you make holes in timber. Low wattage power drills can make the task much simple.

8. Other small and fundamental tools – These include pencils, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is no fixed price on woodworking projects. Dependent on the type of project you would like to finish, pricing can be set. The easy the job, the less cost it involves. However, at the beginning purchasing the tools will probably be somewhat hefty. Therefore, it’s better to resolve a budget on the resources, then keyword on the project. Buying the basic tools will ensure that you don’t have to buy any more material aside from the wood ply.

Time and Directions

Directions are one of the primary things that each and every newcomer should follow. It is like the woodworking Bible. Instructions manual is very easy to comprehend the procedure, what to do and the way to get it done. It keyword is a systematic manual for completing the project. Time also plays a significant role in the building of woodworking jobs. Woodworking projects require time and therefore it’s crucial for a novice to have ample amount of time weekly.

Ideas for Beginners

There aren’t any quick tips or suggestions that would make the work easy. Nevertheless, the most indispensable thing keyword which will allow you to achieve success is proper planning. With appropriate planning and a plan, it is likely to achieve success quickly. If you know the objective of woodworking, the item you need to construct, the tools you require in order to own and the typical time it’s possible to devote daily; then you are ready to go.

Conclusion, Free Woodworking Design Plans

All these strategies and instruction will make the woodworking projects and plans for novices fast to finish. Always make sure you have all the vital tools, materials, space prepared. Keep the instructions for constructing an item handy. Appropriate strategy and preparation can help you to earn a great woodworking job for your property.

|

Finding Woodworking Projects and Plans for Beginners Free Woodworking Design Plans

Folks if you’re looking for a way to pass time or want an alternate method to make money they usually turn to a hobby they enjoy. Woodworking is one of the hobbies people turn to do as a hobby or home based company. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of projects one can think of. When starting out you need to be very careful when choosing which project to start out with because you will find projects that can be too difficult for a newbie. But do not be concerned about that since we are going to give you tips on the right means to start woodworking as a beginner.

The same as any other hobby woodworking requires some working gear, so before you pick your project you need to be aware of whether you’ve got the available tools to work on such a job. Try not to spend a lot of cash on purchasing equipment when starting out, purchase more gear as you gain more experience and become an expert carpenter. If you enjoy your hobby then there’ll not be any difference between the hand as well as the normal hands.

Finding Woodworking Projects and Plans for Beginners Free Woodworking Design Plans

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking at home will give you time to research different jobs and find out so many things. That is why it’s important to spend less money when starting out so you can afford to make mistakes and at any time learning about different projects.
It is extremely important that you know more about different kinds of wood available for making projects. Expect carpenters utilize several kinds of wood quality for decorating bits, learning which type of wood they use can help you prepare the wood you will need for certain jobs you may want to pursue.
Once you know the basics of wood choice and the use of different tools now you can employ them in cutting well wood pieces and putting wood together. Knowing what to do will help you in creating good projects to satisfy your needs.

Free Woodworking Design Plans practice makes perfect so be sure you practice your work every day if possible. Try out a lot of layouts utilizing various tools so that you may find the hang of using the tools. When starting out you can make a number of errors but with time you will learn how to correctly use them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Free Woodworking Design Plans

Woodworking as a hobby may be one of the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimal amount of gear and equipment. A small home workshop may produce a wide variety of simple projects which will help you develop your creative and building skills while rewarding you with practical and artistic wood products which you can enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let’s discuss where you will perform your woodworking, based on the size of your home, you may be able to produce a dedicated space to your woodworking tasks. This may be a reserved place on your garage or in your basement. In some cases, a detached shed or outbuilding might be perfect to set up your very first store. A heated shop detached from your house provides one distinct advantage: better dust control. Without sophisticated dust control systems, basement workshops will inevitably produce dust which travels to the living area of your house. This is particularly true in homes with forced air heating systems where cold air yields located in the basement draw dust up into the upper levels of the home. Another advantage of detached workshops is, clearly, the sound level. It’s possible to work without disturbing the rest of the household. A good compromise could be the garage of your home.

This might help decrease the problems of dust and sound, however based on where you live, a keyword garage layout might not be practical during extremes of hot or cold weather.

Starting Your First Woodworking Shop Free Woodworking Design Plans

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes that they include more space to function in. Free Woodworking Design Plans if you can have a dedicated place for a workshop all the better. Floor gear and bench top equipment can stay in position from project to project. If this installation is not hopeless, at least attempt to make a chair area where equipment could be saved and pulled out as needed. If at all possible plan for inevitable expansion as you get more tools and equipment. In the beginning, set up a seat area where you are able to shop and use most of your gear, with a temporary expansion of your activities onto the garage or basement floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. Add a sturdy shelf below the seat to house your hands power tools and a pegboard above the bench to hang other gear. Put in a woodworking at one end of the seat on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Free Woodworking Design Plans

The reach of your start-up equipment will be largely based on your financial plan. Whether you have got large financial resources or you’re starting on a shoestring always purchase quality gear. If you can afford it, purchase your quality tools in the local building and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or other regional advertisements. You will find an abundance of quality gently used tools out there which belong to individuals who embarked on that 1 molding project around the house or obtained tools as presents that they won’t ever utilize. You can usually purchase tools for all these sellers for under half the initial price and save even more money if you create a package deal for all their unused equipment. Of course, acquiring tools from private individuals will take additional time and perhaps travel expenditures. Weigh the benefits of traveling around town to save a few extra dollars on a cheap piece of gear. The excess expense of travel and time in these situations is usually justified when purchasing large ticket items such as table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimum quantity of hand equipment yet generated sophisticated and intricate pieces. Focus on developing your skills with your start-up set of tools and avoid lamenting about the gear you wished you’d.
Here is a checklist of the more useful tools you’ll need to get started:
Safety Gear: Start as expected by eye protection. Get a decent pair of safety glasses that also offer some side protection for your eyes. Buy a quality oil set that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will eventually impair your vision and influence safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You can avoid wearing all of them together if you find them uneasy.

The next piece of crucial safety equipment you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking may be noisy and long-term exposure to these noise levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap with my ear muffs and eye protection. I am keeping the dust from my hair. I am good to go!

Power Hand Saw: Frequently known as a skill saw after the popular brand name, this can end up being the most flexible instrument in a start-up workshop. In fact, in the hands of an expert, a power hand saw could be used to build an whole house. Eventually, you are going to want to purchase a table saw, but for now, a power hand saw for the woodworker on a funding empowers him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. All these tend to cut back and will burn out before you even start your next project. After choosing the right saw install a quality blade. Most saws include a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will add great versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument can’t just cut curves. It is perfect for cutting holes in wood too like manage slots. Eventually, you’re going to want to obtain a band saw. Bandsaws are even more flexible but a excellent floor unit can be costly. A jigsaw may be a good stop gap to the novice woodworker.

Purchase an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck over the standard 3/8 inch version. Through tough lessons learned, I have found that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills tend to get very short run times and need to be recharged frequently. Their battery life will be poor and to make things worse keyless chucks come loose and slip often. This is one annoyance you don’t need on your workshop. Buy an assortment of quality carbide tipped drill bits which are kept in a holder labeling each drill bit size. Create a habit of returning each drill bit to its prospective slot at the holder after every use. Last, get a set of hard steel driver bits. Your drill can also be a versatile screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer remains as the most versatile instrument in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries occur. Although the most ordinary, hammer accidents are often of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The head typically comes loose and the tool becomes useless. Pick a title brand quality hammer at the 16-ounce scope for general work and a smaller completing hammer for more complex work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These types of hammers are more appropriate for rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can handle just about any sanding requirements you have as a novice woodworker. As your woodworking skills evolve, you will likely upgrade to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface space. As you embark on the first few projects you might discover that your palm sander using just a little bit of effort can transform rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and shape rough planks with 100 grit paper and later finish your work with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets using an excess supply of 100 grit paper. You’ll find this grade of paper that the most versatile in your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Though low tech in theory, these tools allow you to taper edges, flatten high spots and fix any imperfections in timber pieces. {Begin with a typical number 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold down your wood bits as you work on them. Unfortunately, superior clamps are expensive and it normally takes the novice woodworker a few years to collect a comprehensive set of wood clamps. Begin with a pair of long”pipe” clamps. Now the pipe has been replaced with extended steel shafts, but the structure remains the same. Receive a pair of the longest clamps which you could afford. You may contact them for smaller glue jobs and enlarge them to their full length for bigger jobs.

Shop Vice: A store vice installed at the end of your bench is perfect for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices using their timber clamping surfaces can securely hold wood bits without marring or damaging them. A number of the greater vices offer rapid release mechanisms that enabled the consumer to quickly open and close the jaws with no tedious handle turning. The wood clamping surfaces in your vice will periodically need replacement. I prefer to use soft pine in my vices that will not crush or damage lots of the various forests that I utilize. Whether I am working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be one of the most frequently used tools. Purchase a good excellent name brand tape measure with a wide tape typically in the 25-foot range. Even though in your store you may not be using the tape in these lengths, the larger tape steps provide more rigid tapes which will not flop around and slide off the end of boards. Measuring when you are on your own will be a lot simpler, and of course, quality tape steps can last for many decades.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the wood.

What is Woodworking? How to Become a Master Woodworker From Your Own Home Free Woodworking Design Plans

Woodworking is referred to as the building or the creation of items from wood. It is possible to produce a great deal of different items from woodworking and these items can be as large as gazebos or as small as wooden toys. No matter how large or small your personal project maybe you’ll be very likely to accomplish that goal with woodworking. In addition, woodworking has many personal in addition to emotional benefits! In this guide, I am going to briefly identify some of these benefits for youpersonally.

Woodworking as a Career:

A lot of people who love to use their hands have turned that love into a profession through woodworking. Individuals who build things from wood are generally known keyword because carpenters. Carpenters can operate on a variety of woodworking projects and occupation types. For instance, some carpenters own their carpentry business and these individuals have the luxury to place their job hours. This benefit enables carpenters the opportunity to spend more time with their families and also have less job strain. Raising kids is a really difficult task no matter what way you approach the task! To get a carpenter who owns their own company, this job may not be hard because that individual is going to have more time to become a part of his or her child’s life. By playing a bigger part in the life span of your child you’ll be having a greater influence on the type of character that child develops into, which is a huge concern for any loving parent. In addition to these advantages, carpentry can also have health benefits as well.

Starting Your First Woodworking Shop Free Woodworking Design Plans

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood around a lot. This causes more physical activity, which results in better physical health. Keeping your body physically healthy is really important and keyword will assist in preventing the occurrence of various ailments later on in life. By being physically fit you can decrease chances that you will have a heart attack, have seizures, become a diabetic, and reduce the odds of giving birth to a range of other illnesses.

Free Woodworking Design Plans, Do It Yourself Woodworking Saves Money:

I always feel like that I paid way too much when I go to home improvement shops and purchase patio furniture, and I am certain that I am not the only person who has felt like this! A successful small business owner once advised me to always raise the sales price of a product to double what you obtained it for. In this manner, you can always reduce the product to 50 percent away and still come out without acquiring any losses. This sounds like it might be exactly the exact same tactic that home improvement stores use in selling their wooden furniture products. Regardless, there’s a way which it is possible to get around paying the extra money and that’s to do with building it yourself. Luckily, there are several really good woodworking products that offer thousands of detailed woodworking keyword strategies for hundreds of different project types. Thus, you really can build whatever you need or see in almost any home improvement store. Doing something does take a little bit of time but the time is well spent when you end up saving hundreds of dollars as a result of your hard work.

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Workbench (woodworking)

A workbench is a table used by woodworkers to hold workpieces while they are worked by other tools. There are many styles of woodworking benches, each reflecting the type of work to be done or the craftsman's way of working. Most benches have two features in common: they are heavy and rigid enough to keep still while the wood is being worked, and there is some method for holding the work in place at a comfortable position and height so that the worker is free to use both hands on the tools. The main thing that distinguishes benches is the way in which the work is held in place. Most benches have more than one way to do this, depending on the operation being performed.

Probably the oldest and most basic method of holding the work is a planing stop or dog ear, which is simply a peg or small piece of wood or metal that stands just above the surface at the end of the bench top. The work is placed on the bench with the end pushed against the stop. The force of the planing keeps the board in place, so long as the force is always toward the stop. Planing against a stop gives the woodworker good feedback - they can tell a lot about what is going on just by the pressure, force and balance required. A stop can take the form of a batten attached to the end of the bench, or it can be adjustable, able to be moved up and down according to the size of the work - or pushed down below the surface when not needed. A simple bench dog can serve as a planing stop.

Another ancient method of holding the work is the hold fast or holdfast. A holdfast looks like a shepherd's crook. The shank goes into a hole in the bench top and the tip of the hook is pressed against the work from above. The holdfast is set by rapping the top with a mallet, and released by hitting the back side. A good holdfast works remarkably well, and is inexpensive and easy to install.

Video: Woodworking Tools