Free Woodworking Designs | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable thoughts and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and a few of those attributes along with a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, himself is also an educator and a part of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking whenever they are following because most of the thoughts and jobs Ted’s resource are easy to understand and simple. Ted McGrath spent two years exploring so that he could collect enough material for an extensive bundle, and he ended up making a really’complete’ woodworking resource.

Many might still seem unsure if they need to be purchasing Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it more challenging to make the right option. There are in fact lots of things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. People that are just getting started will discover the thoughts and projects in Ted’s package quite easy. Without doubt, intricate carpentry is involved; nonetheless, they will find it really simple to follow Ted’s simple step by step directions. Currently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source which will help beginners learn a lot about woodworking. They will also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers will be able to find any project of their choice in this bundle quite readily, even though there numerous options.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and people who purchase it will be endorsed by a 60-day warranty, so if this woodworking package fails to meet them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long time to down due to its large size. Nonetheless, using a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nevertheless, they did not mind being overwhelmed considering how this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast it contains pretty much every woodworking project a woodworker might be considering building.

This woodworking bundle made by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking packages that are available across the internet. Ted has done his very best to direct them in every possible way he could, through easy to comprehend textual directions, clear pictures and even movies as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking projects they will find inside. So, it is certainly worth buying!

How to Become a Master Woodworker From Your Own Home Free Woodworking Designs

Woodworking is 1 hobby that could also be a rewarding career if you like to work together with your hands and construct exquisite pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a fine woodworking craftsman, you’ll have the ability to construct all kinds of furniture, (table, beds, and chairs), effortlessly. After that you can sell your completed woodworking jobs and make a handsome profit. Free Woodworking Designs.

It takes time to become skilled at the craft of woodworking. The wonderful thing about working up to this expert craftsman degree is you will be able to build some really wonderful furniture for you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit on your living space. It’ll be a topic of conversation when you have friends come over to visit. They will ask: How can you create it? Where did you get the woodworking programs? Just how long can it take to finish the job? What kind of wood did you use? What type of tools did you use? Just how on earth did you create such a gorgeous piece of furniture? As you speak about your work, a feeling of pride will encounter you and don’t be surprised if your friends ask you to make one for them too!

How to Become a Master Woodworker From Your Own Home Free Woodworking Designs

If you’re thinking you are just too old or too young for woodworking, think again! You’re never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to begin in Woodworking? Free Woodworking Designs.

Start with an idea in mind of what you want to construct and then get a really good woodworking project plan that’s geared toward novices. There are several little woodworking projects for novices available for purchase from online woodworking retailers. Obviously, you can start out with as expansive a woodworking plan as you pick. On the other hand, the chances are if you begin using a little woodworking job at first, you will get a better prospect of keyword finishing the project.

Your woodworking project plan should incorporate some lists! Lists of: woodworking hardware, the amount and variety of wood needed, and the essential hand tools and power tools to complete the undertaking. Note: A word of warning about buying woodworking tools. Just buy what you want to finish your instant or upcoming endeavor. This is important especially if you’re a beginner and just beginning. Tools aren’t cheap. The beginner needs good woodworking gear, but you can easily break the bank buying a great deal of tools you might not utilize all that often. If you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you can afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking straps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and don’t forget that the wood glue and a brush to spread the wood glue! Obviously, you will need a dry area to work and might require a pair of saw horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more woodworking hand tools and more woodworking power tools , but the idea is to purchase the essential hand and power tools which novices will need. You may always add to your toolbox as you get experience!

Free Woodworking Designs Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you have bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. But if you are not certain about what to do there is help available! There are several areas that starting woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines out there. Each month the authors in woodworking magazines do a story about the best way best to improve your woodworking craft. When it’s showing you the way you can apply a finish to a finished project, or how to create a mortise and tenon joint, something new can be learned every month. Next, is buying educational DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to work with a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Free Woodworking Designs

If you are a beginner and very enthusiastic about doing a DIY job for house then, woodworking can be fun. If you don’t have the proper information, education, and ability, you may wind up spending more money and time than you initially intended to spend. As a beginner woodworker, you need to have time and the appropriate tools. Having said, there are a few essential aspects that you need to keep in mind, before beginning with any woodworking project.

1. If you’re a beginner, you must first need to be very interested in woodworking. Making something new with your hands is a special feeling. Don’t begin a job if you’re not interested, because this might land you at a terrible location.

2. Consider the primary reason behind making this woodworking project. Choose the uses of this item you are making.

3. Consider your abilities and analyze the time that you have, until you begin with a job.

4. Start projects that you can complete. If you’re in the midst of some work, then it’s better not to start any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Free Woodworking Designs

If you maintain those essential things in your mind before you begin a woodworking project, it will become very easy for you to achieve success. Woodwork requires planning as much as it takes effort. So how can you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to choose the woodworking jobs you want to start with. As a beginner, always select a project that has quite a basic construct up or a very simple construction. A few easy to begin projects comprise, bird feeder, benches, shelves, etc.. The moment you find these techniques, you can always move to the next level of woodworking jobs, like cabinets, sheds, along with others. Beginning jobs should keyword be less complicated and less bothersome so that you have a better comprehension of working with woods and their tools. Once the job is selected, start selecting your tools.

Beginners Woodworking Tools, Free Woodworking Designs

Tools are the ways through which you will win the battle of woodworking. A lot of men and women think that power tools are needs. But for beginners, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would require would be:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when fixed with vises, provide ample space to operate. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make matters considerably easy for you. When you buy a hammer, always check the equilibrium between the weight and endure. Always pick a hardy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at several sizes. There are various sorts of saws available in the market. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian kinds and standard flat type. Having all of them can help you in advance woodworking. You might even buy keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you require a wrench. Nonetheless, this isn’t a tool for novices, but using it might make work simpler for you at a subsequent stage.

7. Drill – Drill helps you create holes in timber. Power drills are more helpful but they cost more. Low wattage power drills can make the job much simple.

8. Additional small and basic tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed price on woodworking projects. Based on the sort of project that you want to complete, pricing could be set. The simple the job, the less price it involves. But at the very beginning buying the tools will be somewhat hefty. Because of this, it’s better to resolve a budget on the resources, then keyword on the undertaking. Purchasing the fundamental tools will ensure that you don’t have to purchase any more material other than the wood ply.

Time and Directions

Instructions are among the primary things which each and every beginner should follow. It is like the woodworking Bible. Instructions guide is quite easy to understand the procedure, what to do and how to do it. Time also has an important part in the building of woodworking projects. Woodworking projects require time and so it’s necessary for a novice to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. Nevertheless, the most essential thing keyword which will allow you to reach success is proper planning. With proper planning and a plan, it is likely to achieve success immediately. If you know the purpose of woodworking, then the thing that you want to build, the tools you require in order to own and the average time you can devote every day; then you are ready to go.

Conclusion, Free Woodworking Designs

All these strategies and education is likely to create the woodworking projects and strategies for novices quickly to complete. Always ensure you have all of the essential tools, materials, space ready. Read the instructions for constructing an item handy. Proper strategy and planning can allow you to make a great woodworking job for your property.

|

How to Become a Master Woodworker From Your Own Home Free Woodworking Designs

Folks if you’re trying to find a way to pass time or desire an alternative method to make money they generally turn to a hobby that they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are lots of jobs one can think of. When starting out you need to be very careful when choosing which job to start out with because there are projects that may be too difficult for a newbie. But do not be concerned about that since we will give you guidelines on the right way to start woodworking as a newcomer.

The same as any other hobby woodworking requires some working equipment, therefore before you choose your job you have to be aware of if you have the available tools to work on that job. Try not to invest a good deal of cash on purchasing equipment when starting out, buy more gear as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there’ll not be any gap between the hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Free Woodworking Designs

Woodworking at home will give you time to explore different projects and learn a lot of things. That’s why it’s very important to spend less money when starting out so you can afford to make mistakes and at any time learning about different jobs.
It is extremely important that you know about different types of wood available for making projects. Expect carpenters utilize different types of wood quality for decorating bits, learning which type of wood they use will allow you to prepare the wood you will need for certain projects you may want to pursue.
As soon as you know the fundamentals of wood selection and the use of different tools now you can implement them in cutting out well wood pieces and putting wood together. Knowing what to do will help you in building good projects to fulfill your wants.

Free Woodworking Designs practice makes perfect so make sure that you practice your work daily if possible. Try out lots of designs using various tools so you can find the hang of using the tools. When starting out you can make a number of errors but with time you will learn how to properly utilize them and produce quality projects.

|

Starting Your First Woodworking Shop Free Woodworking Designs

Woodworking as a hobby can be among the most rewarding experiences you’ll ever appreciate. You may get started on a shoestring with a minimal number of tools and equipment. A little home workshop can produce a wide array of simple projects that can allow you to develop your creative and construction abilities while rewarding you with practical and artistic wood products which you are able to enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us talk about where you’ll perform your woodworking, based on the dimensions of your home, you might be able to produce a dedicated space into your woodworking activities. This may be a reserved spot on your garage or in your cellar. Sometimes, a detached shed or outbuilding might be perfect to prepare your first store. A heated store detached from your home provides one distinct advantage: better dust control. Without complex dust control methods, basement workshops will inevitably create dust that travels into the living area of your house. This is very true in homes with forced air heating systems where cold air yields located in the cellar draw dust up into the upper levels of the house. Another benefit of detached workshops would be, clearly, the noise level. You can work without disturbing the remainder of the household. A good compromise might be the garage of your home.

This can help minimize the problems of dust and noise, however depending on where you reside, a keyword garage workshop may not be sensible during extremes of cold or hot weather.

The Benefits of Woodworking Free Woodworking Designs

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes they include more space to function in. Free Woodworking Designs if you can have a dedicated spot for a workshop all the greater. Floor tools and bench top gear can remain in position from project to project. If this installation isn’t hopeless, at least attempt to create a bench area where equipment can be stored and pulled out as needed. If possible plan for inevitable expansion as you get more tools and gear. In the start, establish a seat area where you can shop and use the majority of your gear, with a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. That will let you work comfortably while standing. Add a sturdy shelf beneath the seat to house your hands power tools along with a pegboard above the bench to hang additional equipment. Put in a woodworking vice at one end of your bench on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Free Woodworking Designs

The scope of your startup equipment will be mostly based on your budget. Whether you have got big financial resources or you are starting on a shoestring always purchase quality equipment. If you can afford it, buy your quality tools in the local construction and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or other regional advertisements. You will find an abundance of quality lightly used tools out there that belong to people who stumbled on that one molding project around the house or obtained tools as gifts which they will never use. You can usually purchase tools for these sellers for less than half of the initial price and save even more money should you create a package deal for all their unused equipment. Of course, getting tools from private people will require additional time and perhaps travel expenditures. Weigh out the benefits of traveling around town to save a couple added bucks on a cheap piece of equipment. The excess cost of travel and time in these scenarios is usually justified when purchasing large ticket items such as table saws, bandsaws or high finished tools such as surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum quantity of hand gear yet produced sophisticated and complex bits. Focus on developing your abilities with your start-up set of resources and prevent lamenting about the gear you wished you had.
Here’s a checklist of the more useful tools you’ll need to get started:
Safety Gear: Start as expected by eye protection. Get a nice pair of safety glasses that also offer you some side protection to your eyes. Purchase a quality acrylic set that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually hamper your vision and affect security. Avoid wearing goggles at a workshop. Most impair vision and dust up quickly. You can avoid wearing them all together if you find them uncomfortable.

The next bit of crucial safety equipment that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to those noise levels may affect hearing and lead to tinnitus and other hearing losses. With this set up I’m shielding my eyes and my ears. I’m keeping the dust out of my hair. I am good to go!

Power Hand Saw: Frequently known as a skill saw following the favorite brand name, this can end up being the most versatile instrument in a startup workshop. In fact, at the hands of an expert, a power hand saw could be used to build an entire property. At some point, you’ll want to purchase a table saw, but for now, a power hand saw for the woodworker on a funding empowers him to perform cross cuts, rip cuts and even intricate angle cuts. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. All these tend to cut back and will burn out before you even start your next job. After selecting the proper saw install a quality blade. Most saws include a starter blade of lower quality even if they’re a good saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t only cut curves. It’s perfect for cutting holes in timber too like handle slots. Eventually, you’ll want to obtain a band saw. Bandsaws are much more flexible but a quality floor unit can be costly. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the standard 3/8 inch version. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their long-term battery life tends to be bad and to make things worse keyless chucks come loose and slip frequently. This is 1 annoyance you don’t want in your workshop. Purchase an assortment of superior carbide tipped drill bits that are kept in a holder labeling each drill bit size. Create a habit of returning each drill piece to its prospective slot in the holder after every use. Lastly, get a pair of tough steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the store, and frequently the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop accidents happen. Even though the most ordinary, hammer injuries are usually of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and features a comfortable grip. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood grips with poor joints between the head and handle. The head usually comes loose and the tool becomes useless. Pick a title brand quality hammer in the 16-ounce range for general work and a smaller finishing hammer for more complex work. Avoid using large framing hammers at the workshop and some other with dimpled head tips. These types of hammers are more suited for rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can manage just about any trimming requirements that you have as a novice woodworker. As your woodworking abilities evolve, you will likely upgrade to a floor version disk and belt sander. But for now, the ever-versatile palm sander can clean up borders, cross cuts and even limited quantities of surface area. As you embark on the first few projects you might discover your palm sander using a bit of effort can transform rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and form rough boards with 100 grit paper and after finish your work with 200 or 300 grit paper. Buy an range of sandpaper sheets using an excess source of 100 grit paper. You’ll get this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Though low tech in theory, these tools allow you to taper edges, flatten high spots and fix any imperfections in timber pieces. {Begin with a typical number 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold down your wood pieces as you work on them. Unfortunately, good clamps are costly and it usually requires the novice woodworker a few years to collect a comprehensive set of timber clamps. Begin with a set of long”pipe” clamps. Today the pipe has been replaced with extended steel shafts, but the structure remains the same. Get a pair of the longest clamps which you can spend. You can get in touch with them for smaller glue jobs and expand them to their entire length for larger projects.

Shop Vice: A store vice installed in the end of the seat is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their wood clamping surfaces can securely hold wood bits without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enable the user to rapidly open and close the limbs without tedious handle turning. The timber beamed surfaces on your vice will periodically need replacement. I prefer to use soft walnut in my vices which won’t crush or damage many of the various forests that I work with. Whether I am working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be one of the most frequently used tools. Purchase a good excellent name brand tape measure with a wide tape usually from the 25-foot range. Although in your shop you may not use the tape in these spans, the bigger tape steps provide more rigid tapes that will not flop around and slip off the end of boards. Measuring when you are by yourself will be a great deal simpler, and of course, quality tape steps can endure for many decades.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the timber.

What is Woodworking? How to Become a Master Woodworker From Your Own Home Free Woodworking Designs

Woodworking is known as the construction or the creation of objects from wood. It is possible to create a great deal of unique objects from woodworking and these items can be as big as gazebos or as little as wooden toys. However big or small your private project maybe you will be very likely to accomplish that goal with woodworking. Additionally, woodworking has many private as well as psychological benefits! In the following guide, I will briefly identify some of these benefits for you.

Woodworking as a Career:

Individuals who build things from wood are generally known keyword as carpenters. Carpenters can operate on a variety of woodworking projects and job types. For example, some carpenters possess their carpentry business and these individuals have the luxury to place their job hours. This benefit allows carpenters the opportunity to spend more time with their families and also have less job stress. Raising kids is a very difficult task no matter what way you approach the endeavor! For a carpenter who owns his or her own business, this job may not be as hard because that person is going to have more time to be part of his or her child’s lifetime. By playing a larger part in the life span of your child you will be having a greater impact on the sort of personality that child develops into, which is a massive concern for any loving parent. Besides these advantages, carpentry can also have health benefits too.

The Benefits of Woodworking Free Woodworking Designs

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood round a lot. This results in more physical activity, which leads to better physical health. Keeping your body physically fit is really important and keyword can help prevent the occurrence of various ailments later on in life. By being physically healthy you can reduce chances you will have a heart attack, have seizures, become a diabetic, and reduce the odds of having a range of different disorders.

Free Woodworking Designs, Do It Yourself Woodworking Saves Cash:

I always feel as I paid way too much when I go to home improvement shops and buy patio furniture, and I am sure that I am not the only person who has felt this way! A successful business owner once told me to constantly raise the sales price of a commodity to double everything you got it for. This way, you can always reduce the merchandise to 50 percent off and still come out without acquiring any losses. This sounds like it might be the exact same tactic that home improvement shops use in selling their own wooden furniture solutions. Regardless, there is a way that it is possible to get around paying the additional cash and that has to do with building it yourself. Fortunately, there are several really excellent woodworking products that offer thousands of comprehensive woodworking keyword strategies for hundreds of different project types. So, you really can build whatever you need or see in any home improvement store. Doing something does require a bit of time but time is well spent when you end up saving hundreds of dollars because of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Chisel

A chisel is a tool with a characteristically shaped cutting edge (such that wood chisels have lent part of their name to a particular grind) of blade on its end, for carving or cutting a hard material such as wood, stone, or metal by hand, struck with a mallet, or mechanical power.[1] The handle and blade of some types of chisel are made of metal or of wood with a sharp edge in it.

Chiselling use involves forcing the blade into some material to cut it. The driving force may be applied by pushing by hand, or by using a mallet or hammer. In industrial use, a hydraulic ram or falling weight ('trip hammer') may be used to drive a chisel into the material.

A gouge (one type of chisel) serves to carve small pieces from the material, particularly in woodworking, woodturning and sculpture. Gouges most frequently produce concave surfaces. A gouge typically has a 'U'-shaped cross-section.

Video: Woodworking Projects