Free Woodworking Plans For Gifts | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and some of those attributes along with a few petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking when they are following because most of the thoughts and projects Ted’s source are easy to understand and easy. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive package, and he ended up making a really’complete’ woodworking resource.

Many might still seem unsure if they should be purchasing Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it even more challenging to make the ideal choice. There are actually many things that set Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit from Ted’s woodworking Package. Those that are only getting started will discover the ideas and jobs in Ted’s bundle quite simple. No doubt, intricate carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s easy step by step instructions. Presently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source that will help beginners learn a lot about woodworking. They’ll also be able to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 easy woodworking ideas and woodworking projects. Woodworkers are going to have the ability to find any project of their choice in this package quite readily, though there numerous options.

60-Day Iron Clad Money-back Guarantee

In general, this item is and those who purchase it will be backed by a 60-day guarantee, so when this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long period to down because of its large dimensions. Nonetheless, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overrun considering the fact that this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking package made by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking bundles that are available throughout the internet. Ted has done his very best to direct them in every possible way he can, through easy to comprehend textual instructions, clear pictures and even videos as well.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find inside. Therefore, it’s certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more innovative hand tools and more woodworking power tools , but the concept is to buy the crucial hand and power tools that novices will need. You may always add to your arsenal as you get experience!

Free Woodworking Plans For Gifts Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you have purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to complete your project. But if you’re unsure about what to do there is help available! There are lots of areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Each month the writers in woodworking magazines do a story on the best way to increase your woodworking craft. Whether it is showing you how you can apply an end to a completed job, or how to make a mortise and tenon joint, something new can be heard each month. Next, is buying instructional DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to work with a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

The Benefits of Woodworking Free Woodworking Plans For Gifts

If you are a beginner and very interested in doing a DIY project for house afterward, woodworking could be interesting. If you don’t have the right information, education, and ability, you might land up spending more time and money than you originally meant to spend. As a beginner woodworker, you need to have space, time and the correct tools. Having mentioned, there are a few essential factors that you need to remember, before beginning with any woodworking project.

1. If you are a beginner, you must first have to be somewhat interested in woodworking. Creating something new with your own hands is a special feeling. Don’t start a job if you are not interested, as this may land you in a terrible location.

2. Think of the main reason for making this woodworking project. Decide on the uses of this thing you’re making.

3. Consider your abilities and examine the time that you have, before you start with a job.

4. Start projects that you’re able to finish. If you are in the midst of a work, then it’s wise not to begin any project in any way.

The Benefits of Woodworking Free Woodworking Plans For Gifts

If you keep those essential points in your mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires preparation as much because it requires effort. So how can you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to opt for the woodworking jobs that you wish to start with. As a beginner, always select a job which has a very basic build up or a very simple structure. Some simple to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you can always proceed to the next level of woodworking projects, like cupboards, sheds, and others. Beginning jobs should keyword be complicated and less bothersome so you have a better comprehension of working with forests and their tools. Once the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Free Woodworking Plans For Gifts

Tools would be the means whereby you will win the battle of woodworking. Many men and women believe power tools are needs. However, for novices, basic hand tools can be very handy and more than useful in completing a project. If woodworking is the hobby, then some tools that you would require are:

1. Workbench – A workbench is needed for precise cuts and measurements. The workbench, when fixed with vises, offer ample space to operate. As a primary tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer can make matters considerably easy for you. When you purchase a hammer, always assess the equilibrium between the weight and endure. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are different types of saws out there on the marketplace. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Having all of them will help you in advance woodworking. You can even purchase keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape gives you the capacity to quantify wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you demand a wrench. However, this is not a tool for novices, but having it might make work simpler for you at a subsequent stage.

7. Drill – Drill helps you create holes in wood. Low wattage power drills can make the task much simple.

8. Additional small and fundamental tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s not any fixed cost on woodworking projects. Dependent on the type of job you would like to complete, pricing can be set. The easy the job, the less price it involves. However, at the beginning buying the tools will probably be a little hefty. Therefore, it’s much better to fix a budget first on the resources, then keyword on the undertaking. Buying the fundamental tools will ensure that you don’t need to buy any more material aside from the wood ply.

Time and Instructions

Instructions are among the primary things that every beginner should follow. Instructions manual is very simple to understand the process, what to do and the way to get it done. It keyword is a systematic manual for completing the project. Time also has a significant part in the construction of woodworking jobs. Woodworking projects demand time and so it is crucial for a novice to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. Nevertheless, the most indispensable thing keyword that can allow you to reach success is proper preparation. With proper planning and a strategy, it is likely to achieve success quickly. If you know the purpose of woodworking, then the item that you need to build, the resources you need in order to possess and the typical time you can devote every day; then you’re all set to go.

Conclusion, Free Woodworking Plans For Gifts

These strategies and instruction will make the woodworking projects and strategies for beginners quickly to finish. Always ensure you have all the essential tools, materials, space ready. Keep the instructions for building a product handy. Proper strategy and planning will help you to make a great woodworking project for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Free Woodworking Plans For Gifts

Folks if you’re trying to find a way to pass time or want an alternative method to make money they usually turn to a hobby that they enjoy. Woodworking is one of those hobbies individuals turn to do as a hobby or home based business. It’s very exciting to do and anyone can begin.

When doing woodworking at home there are a lot of projects one can think of. When starting out you need to be quite careful when choosing which project to begin with since there are jobs which can be too difficult for a newbie. But don’t be concerned about that because we will provide you guidelines on the right way to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, so before you choose your job you have to know whether you’ve got the available resources to work on such a job. Try not to spend a good deal of cash on buying gear when starting out, purchase more gear as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there will not be any gap between the hand as well as the normal hands.

The Benefits of Woodworking Free Woodworking Plans For Gifts

Woodworking at home will give you time to explore different projects and find out a lot of things. That’s why it’s important to spend less money when starting out so you can manage to make mistakes and at any time learning about various jobs.
It’s very important that you know about different kinds of wood available for making projects. Expect carpenters utilize different types of wood quality for decorating pieces, learning what type of wood they use can help you prepare the wood you will need for specific jobs you may want to pursue.
Once you know the basics of wood choice and the usage of different tools you can now employ them in cutting out well wood pieces and putting wood together. Knowing what to do will assist you in creating good jobs to satisfy your wants.

Free Woodworking Plans For Gifts practice makes perfect so be sure that you practice your work every day if possible. Try out lots of layouts using various tools so that you may find the hang of working with the tools. When starting out you may earn a number of mistakes but with time you will learn how to correctly utilize them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Free Woodworking Plans For Gifts

Woodworking as a hobby may be among the most rewarding experiences you’ll ever enjoy. You can get started on a shoestring with a minimal amount of tools and equipment. A small home workshop may generate a broad variety of simple projects that can allow you to develop your creative and building abilities while rewarding you with artistic and practical wood products which you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let us discuss where you’ll perform your woodworking, Depending on the size of your home, you may be able to create a dedicated space into your woodworking activities. This may be a reserved place in your garage or on your cellar. In some cases, a detached shed or outbuilding might be perfect to set up your very first store. A heated shop detached from your home offers one distinct advantage: better dust control. Without complex dust control systems, basement assignments will inevitably produce dust that travels into the living area of your house. This is very true in homes with forced air heating systems in which cold air yields located in the cellar draw dust up into the upper levels of the home. Another advantage of detached workshops would be, of course, the sound level. It’s possible to work without disturbing the rest of the household. A good compromise could be the garage of your home.

This can help minimize the difficulties of dust and noise, however depending on where you reside, a keyword garage layout may not be sensible during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Free Woodworking Plans For Gifts

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes they add more space to function in. Free Woodworking Plans For Gifts if you’re able to have a dedicated spot for a marathon all the greater. Floor gear and bench top gear can remain in position from project to project. If this setup isn’t hopeless, at least try to create a bench area where equipment could be stored and pulled out as needed. If at all possible plan for inevitable expansion as you get more tools and gear. At the start, set up a seat area where you can store and use most of your equipment, with a temporary expansion of your actions onto the garage or basement floor.

A basic workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. Insert a sturdy shelf below the bench to house your hand power tools along with a pegboard above the bench to hang additional gear. Install a woodworking vice at one end of the bench on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Free Woodworking Plans For Gifts

The reach of your startup equipment will be mostly based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring always purchase quality gear. If you can afford it, buy your quality tools in the local building and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or other regional ads. There are plenty of quality lightly used tools out there which belong to people who embarked on that one molding job around the home or obtained tools as presents which they won’t ever use. You can usually purchase tools for these sellers for less than half of the initial cost and save even more money if you create a bundle deal for all their unused equipment. Obviously, acquiring tools from private individuals will take extra time and possibly travel expenditures. Weigh out the benefits of traveling across town to save a couple extra bucks on a inexpensive piece of gear. The excess expense of travel and time in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or high ended tools such as surface planers in the future.
For smaller acquisitions, a visit to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal quantity of hand gear yet produced sophisticated and intricate bits. Focus on developing your abilities with your start-up set of resources and prevent lamenting about the gear you wished you had.
Here is a listing of the more useful tools you’ll need to get started:
Safety Gear: Start as anticipated by eye protection. Get a decent pair of safety glasses that also offer some side protection to your eyes. Buy a quality acrylic collection that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually hamper your vision and influence security. Avoid wearing goggles in a workshop. Most impair vision and dust up fast. You can avoid wearing all of them together in the event that you find them uneasy.

The next bit of critical safety equipment you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to those noise levels may affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. With this setup I’m shielding my eyes and my ears. I am keeping the dust out of my hair. I am good to go!

Power Hand Saw: Often referred to as a skill saw following the favorite name, this may prove to be the most versatile instrument in a startup workshop. In fact, in the hands of a professional, a power hand saw can be used to build an entire house. As mentioned before get an excellent manufacturer saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your second job. After selecting the right saw install an excellent blade. Most saws come with a starter blade of lower quality even if they’re a fantastic saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Begin with a hybrid blade. These possess a balanced enamel count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool cannot just cut corners. It is ideal for cutting holes in timber also like manage slots. At some point, you’ll want to get a ring saw. Bandsaws are even more versatile but a excellent floor unit could be expensive. A jigsaw may be a fantastic stop gap to the novice woodworker.

Buy an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck within the standard 3/8 inch model. Down the road, the 1/2 inch version will prove to be more versatile. Through tough lessons learned, I have found that purchasing quality, in this scenario, is much more crucial than ever. Cheaper drills tend to get very short run times and have to be recharged frequently. Their battery life will be poor and to make things worse keyless chucks come loose and slide often. This is 1 annoyance you do not want on your workshop. Buy an range of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Make a habit of returning each drill piece to its prospective slot in the holder after each use. Last, get a set of tough steel driver bits. Your drill can also be a versatile screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents occur. Even though the most ordinary, hammer injuries are usually of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and features a comfortable grip. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood grips with poor joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Select a name brand quality hammer at the 16-ounce scope for general work and a smaller completing hammer for more complex work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These types of hammers are more appropriate to rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage just about any sanding requirements you have as a beginner woodworker. As your woodworking abilities evolve, you’ll likely update to a floor version disk and belt sander. But for now, the ever-versatile palm sander may clean up edges, cross cuts and even limited quantities of surface area. As you embark on the first few projects you might find that your palm sander using just a little bit of effort can transform rough looking creations into virtual works of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and later finish your job with 200 or even 300 grit paper. Buy an range of sandpaper sheets using an excess supply of 100 grit paper. You’ll find that this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Though low tech in concept, these tools allow you to taper edges, sew high stains and correct any imperfections in wood pieces. {Begin with a typical amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and simply to hold down your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it normally takes the beginner woodworker a few years to accumulate a comprehensive set of wood clamps. Start with a pair of extended”pipe” clamps. Now the pipe has been replaced with extended steel shafts, but the structure remains the same. Get a pair of the maximum clamps that you could spend. You may contact them for smaller adhesive jobs and expand them to their entire length for bigger projects.

Shop Vice: A shop vice installed in the end of the seat is ideal for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their wood clamping surfaces can securely hold wood bits without marring or damaging them. Many of the greater vices offer quick release mechanisms that enabled the user to quickly open and close the jaws with no tedious handle rotation. The wood clamping surfaces on your vice will occasionally require replacement. I prefer to utilize soft pine in my vices which will not crush or damage lots of the different forests that I work with. Whether I am working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be one of your most often used tools. Purchase a good excellent name brand tape measure with a broad tape usually in the 25-foot selection. Although in your store you might not use the tape at these lengths, the larger tape steps offer more rigid tapes which will not flop around and slip off the ending of planks. Measuring when you’re on your own will be a lot easier, and naturally, quality tape measures can last for many years.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the timber. Avoid oversized carpenter’s pencils. Their large flat leads are just too coarse for accurate measurement in the workshop.

Other Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools can assist you in marking the right angles in addition to chemical angles. Additionally, get an range of flat, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find the Robertson format works best for most woodworking projects and will be the most compatible with a drill powered bits. Last, get a pair of 12-inch wood documents. The expense of adhesive through all of your jobs is a little cost consideration. Therefore, it is sensible to decide on the very best. I also have found over the years that I get the best results with both indoor and outdoor projects when I use quality outdoor grade adhesive. These resin-based compounds unlike conventional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Free Woodworking Plans For Gifts

The peaceful gratification of woodworking is an excellent experience in this day and age of rushed lives, smart phones, and time-starved careers. With a minimum investment in the most rudimentary equipment and tools, anyone can learn the profitable skills of his time-tested avocation and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

List of Encyclopædia Britannica Films titles

See also Encyclopædia Britannica Films and the animated cartoon television series Britannica's Tales Around the World..mw-parser-output .tocnumber{display:none}.mw-parser-output #toc ul,.mw-parser-output .toc ul{line-height:1.5em;list-style:none none;margin:.3em 0 0;padding:0}.mw-parser-output .hlist #toc ul ul,.mw-parser-output .hlist .toc ul ul{margin:0}.mw-parser-output .horizontal-toc{}.mw-parser-output .horizontal-toc-align-left{float:right}.mw-parser-output .horizontal-toc-align-left{float:left}.mw-parser-output .horizontal-toc-align-center{margin-left:auto;margin-right:auto;clear:none}.mw-parser-output .horizontal-toc-clear-right{clear:right}.mw-parser-output .horizontal-toc-clear-left{clear:left}.mw-parser-output .horizontal-toc-clear-both{clear:both}.mw-parser-output .horizontal-toc-clear-none{clear:none}

Video: Woodworking Projects