Free Woodworking Plans To Download | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those attributes along with a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an instructor and a part of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking whenever they’re after because all the ideas and jobs Ted’s resource are simple to comprehend and simple. Ted McGrath spent two years researching so he could gather enough material for a comprehensive bundle, and he ended up making a really’complete’ woodworking resource.

Many may still seem unsure whether they need to be buying Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it more challenging to make the ideal option. There are in fact many things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. Those that are just getting started will discover the ideas and projects in Ted’s bundle quite easy. Without doubt, complicated carpentry is involved; nonetheless, they will find it really easy to follow Ted’s easy step-by-step instructions. Currently, both novice and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his package, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that will help beginners learn a lot about woodworking. They’ll also be able to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers will have the ability to locate any job of their choice in this package quite easily, even though there numerous options.

60-Day Iron Clad Money-back Guarantee

In general, this item is and people who purchase it’ll be backed by a 60-day warranty, so if this woodworking bundle fails to meet them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large dimensions. Nonetheless, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nevertheless, they didn’t mind being overrun considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so comprehensive and vast it contains just about every woodworking project a woodworker may be considering constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking bundles that can be found throughout the net. Ted has done his very best to guide them in every possible way he can, through simple to comprehend textual instructions, clear images and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking projects they will find inside. Therefore, it is certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more innovative hand tools and much more woodworking power tools , but the concept is to purchase the crucial hand and power tools that beginners will need. You may always increase your toolbox as you get experience!

Free Woodworking Plans To Download Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you have bought your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to complete your project. However, if you are unsure about what to do there is help available! There are several places that starting woodworkers can find out about the woodworking craft. First, subscribe to one of those several woodworking magazines out there. Every month the authors in woodworking magazines do a story about how to increase your woodworking craft. When it is showing you how you can apply a finish to a completed job, or how to create a mortise and tenon joint, something new could be learned each month. Next, is purchasing instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to work with a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Free Woodworking Plans To Download

If you’re just beginning and very interested in doing a DIY project for home then, woodworking could be fun. If you do not have the proper information, education, and ability, you might land up spending more time and money than you originally intended to spend. As a beginner woodworker, you want to have time and the appropriate tools. Having mentioned, there are a few essential factors that you need to remember, before starting with any woodworking project.

1. If you’re a beginner, you should first have to be somewhat interested in woodworking. Creating something new with your hands is a particular feeling. Do not begin a job if you are not interested, because this might land you in a terrible place.

2. Think of the main reason behind making this woodworking project. Decide on the uses of this item you’re making.

3. Consider your abilities and analyze the time you have, until you begin with a project.

4. Start projects that you’re able to complete. If you’re in the midst of a work, then it’s better to not begin any project at all.

Finding Woodworking Projects and Plans for Beginners Free Woodworking Plans To Download

If you maintain these essential points in your mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires preparation as much because it requires effort. So how can you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to opt for the woodworking jobs that you wish to begin with. As a beginner, always pick a project which has quite a basic build up or a very simple structure. A few simple to begin projects include, bird feeder, chairs, shelves, etc.. The moment you get hold of these techniques, you can always move to the next level of woodworking projects, like cupboards, sheds, and others. Beginning jobs should keyword be less complicated and less frustrating so that you have a better comprehension of working with forests and their resources. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Free Woodworking Plans To Download

Tools would be the means through which you will win the battle of woodworking. A lot of people think that power tools are requires. However, for beginners, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for exact cuts and dimensions. Even the workbench, when fixed with vises, offer ample space to operate. As a primary tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make things much easy for you. When you buy a hammer, constantly assess the balance between the weight and endure. Always pick a hardy, yet lightweight item.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at several sizes. There are various sorts of saws available on the market. Choose a size that you could handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian types and standard flat type. Having all of them will help you ahead of time woodworking. You might also buy keyword power screwdrivers as they make the job much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape gives you the capacity to quantify wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you demand a wrench. However, this is not a tool for beginners, but using it might make work easier for you in a later stage.

7. Drill – Drill helps you create holes in timber. Low wattage power drills can make the task much simple.

8. Other small and fundamental tools – These include pens, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is no fixed cost on woodworking projects. Dependent on the sort of project you want to finish, pricing could be determined. The simple the job, the less price it involves. But at the beginning purchasing the tools will be somewhat hefty. Therefore, it’s much better to resolve a budget on the tools, then keyword on the project. Purchasing the fundamental tools will make certain you do not have to buy any more material aside from the timber ply.

Time and Directions

Directions are among the primary things which every beginner should follow. It is like the woodworking Bible. Instructions guide is very simple to understand the process, what to do and how to get it done. It keyword is a systematic manual for completing the project. Time also has a significant role in the construction of woodworking projects. Woodworking projects require time and therefore it’s crucial for a beginner to have ample amount of time every week.

Tips and Tricks for Beginners

There are no quick tips or suggestions that would make the work easy. But the most essential thing keyword which will help you to achieve success is proper preparation. With proper planning and a strategy, it’s likely to achieve success quickly. If you know the objective of woodworking, then the thing that you need to construct, the tools you require to possess and the average time it’s possible to devote every day; then you are all set to go.

Conclusion, Free Woodworking Plans To Download

All these tips and education will create the woodworking projects and plans for novices fast to finish. Always make sure you have all of the essential tools, materials, area ready. Keep the instructions for constructing an item handy. Appropriate strategy and preparation will allow you to make a great woodworking project for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Free Woodworking Plans To Download

Folks if you’re looking for a way to pass time or want an alternate way to make money they usually turn into a hobby they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are lots of jobs one can consider. When starting out you have to be very cautious when choosing which job to start out with because you will find jobs that may be too difficult for a newbie. But do not worry about that since we will give you guidelines on the right way to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working gear, so before you pick your project you have to know if you’ve got the available tools to work on such a project. Try not to invest a good deal of cash on buying gear when starting out, purchase more equipment as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there’ll be no difference between the artistic hand as well as the hands.

Finding Woodworking Projects and Plans for Beginners Free Woodworking Plans To Download

Woodworking at home will give you time to research unique jobs and find out so many things. That’s why it’s very important to spend less money when starting out so you can afford to make errors and at any time learning about various jobs.
It’s very important you know about the different kinds of wood available for making jobs. Anticipate carpenters utilize several types of wood quality for decorating bits, learning what type of wood they use will allow you to prepare the wood you will need for certain projects you might choose to pursue.
As soon as you know the fundamentals of wood selection and the usage of different tools you can now employ them in cutting well wood pieces and putting wood together. Knowing what to do will assist you in creating good jobs to fulfill your needs.

Free Woodworking Plans To Download practice makes perfect so be sure you practice your work every day if possible. Try out lots of designs using various tools so you may get the hang of using the tools. When starting out you may earn a number of errors but with time you will learn how to correctly utilize them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Free Woodworking Plans To Download

Woodworking as a hobby may be one of the most rewarding experiences you will ever enjoy. You may get started on a shoestring with a minimum number of gear and equipment. A little home workshop may generate a wide array of simple projects which will help you develop your creative and construction abilities while rewarding you with practical and artistic wood products that you can enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let’s discuss where you will perform your woodworking, based on the size of your home, you may be able to produce a dedicated space into your woodworking tasks. This might be a reserved spot on your garage or on your basement. Sometimes, a detached shed or outbuilding may be ideal to prepare your first store. A heated store detached from your home provides one distinct advantage: better dust control. Without complex dust control methods, basement assignments will inevitably create dust that travels to the living area of your home. This is particularly true in homes with forced air heating systems where cold air yields located in the cellar draw dust up into the top levels of the house. Another advantage of detached workshops is, clearly, the noise level. It’s possible to work without bothering the remainder of the household. A good compromise could be the garage of your home.

This can help minimize the problems of dust and sound, however based on where you live, a keyword garage workshop might not be practical during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Free Woodworking Plans To Download

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes they include more space to work in. Free Woodworking Plans To Download if you’re able to have a dedicated spot for a workshop all the greater. Floor tools and bench top equipment can remain in place from project to project. If this setup isn’t hopeless, at least try to make a chair area where equipment could be stored and pulled out as necessary. If at all possible plan for inevitable growth as you acquire more tools and gear. In the start, establish a bench area where you are able to store and use the majority of your equipment, using a temporary expansion of your actions onto the basement or garage floor.

A basic workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. Insert a sturdy shelf beneath the seat to house your hand power tools and a pegboard above the bench to hang other equipment. Put in a woodworking at one end of the seat on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Free Woodworking Plans To Download

The reach of your startup equipment will be mostly based on your budget. Whether you have got big financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, then buy your quality tools in the regional building and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or alternative local advertisements. There are plenty of quality lightly used programs out there which belong to individuals who stumbled on that one molding project around the home or obtained tools as gifts which they won’t ever utilize. You can usually buy tools for all these sellers for under half of the original cost and save even more money should you create a package deal for all their unused equipment. Obviously, acquiring tools from private people will take additional time and possibly travel expenses. Weigh the advantages of traveling across town to save a few added dollars on a cheap piece of gear. The excess expense of travel and time in these situations is generally justified when purchasing large ticket items such as table saws, bandsaws or high ended tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimum amount of hand equipment yet produced sophisticated and intricate pieces. Concentrate on developing your skills with your start-up set of tools and prevent lamenting about the equipment you wished you’d.
Here is a checklist of the useful tools You Will Need to get started:
Safety Equipment: Start as expected by eye protection. Get a decent pair of safety glasses which also offer some side protection for your eyes. Purchase a quality oil collection that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually impair your vision and influence safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You may avoid wearing all of them together in the event that you find them uneasy.

The next bit of critical safety equipment you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking can be noisy and long-term exposure to these sound levels may affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire faster when subjected to high noise levels. Select effective hearing protection that you find comfortable and effective. Last, put on a cap to keep the dust from your hair. I prefer a simple ball cap along with my ear muffs and eye protection. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Often referred to as a skill saw following the favorite name, this can prove to be the most flexible tool in a startup workshop. In reality, at the hands of an expert, a power hand saw could be used to build an entire house. At some point, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a budget empowers him to perform cross cuts, rip cuts and even elaborate angle cuts. As mentioned earlier get an excellent manufacturer saw. Stay away from cheap unknown brands. These are inclined to cut inaccurately and will burn out before you even start your second job. After choosing the proper saw put in an excellent blade. Most saws include a starter blade of lesser quality even if they are a fantastic saw. Keep this blade as a backup and install a quality blade with carbide teeth. Start with a hybrid blade. These have a balanced tooth count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool cannot just cut curves. It’s ideal for cutting holes in wood too like manage slots. At some point, you’re going to want to get a band saw. Bandsaws are even more flexible but a quality floor unit can be expensive. A jigsaw may be a good stop gap to the novice woodworker.

Purchase an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the standard 3/8 inch model. Down the road, the 1/2 inch version will prove to be more versatile. Through tough lessons learned, I have discovered that purchasing quality, in this scenario, is much more crucial than ever. Cheaper drills have a tendency to have very short run times and need to be recharged frequently. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slide often. This is one annoyance you do not need in your workshop. Buy an assortment of superior carbide tipped drill bits that are kept in a holder labeling each drill bit size. Create a habit of returning every drill bit to its prospective slot at the holder after each use. Last, get a pair of tough steel driver bits. Your drill can also be a versatile screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer stays as the most versatile instrument in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop injuries occur. Although the most frequent, hammer injuries are usually of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and features a comfortable handle. Many hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers generally have wood grips with poor joints between the head and handle. The head typically comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce scope for overall work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers in the workshop and any with dimpled head tips. These kinds of hammers are more suited for rough framing tasks and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can handle pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking skills evolve, you’ll probably update to a floor model disk and belt sander. However, for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited quantities of surface area. As you embark on the first few projects you’ll find that your palm sander using a little bit of effort can change rough looking inventions into virtual works of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets with an extra supply of 100 grit paper. You’ll get that this caliber of paper that the most versatile in your store.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Though low tech in theory, these tools enable you to taper edges, flatten high spots and fix any imperfections in timber bits. {Begin with a standard amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold down your wood pieces as you work on them. Unfortunately, superior clamps are costly and it usually takes the beginner woodworker a couple of years to accumulate a comprehensive set of timber clamps. Start with a pair of long”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure is still the same. Receive a pair of the maximum clamps which you could spend. You may get in touch with them for smaller glue jobs and enlarge them to their entire length for bigger projects.

Shop Vice: A shop vice installed at the end of the bench is perfect for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and avoid metal functioning vices with steel jaws. Woodworking vices with their wood clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the greater vices offer you rapid release mechanisms that enabled the consumer to quickly open and close the limbs with no tedious handle turning. The timber beamed surfaces on your vice will periodically need replacement. I would rather utilize soft pine in my vices which will not crush or damage many of the different forests that I work with. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among the most frequently used tools. Buy a good excellent name brand tape measure with a wide tape typically from the 25-foot range. Even though in your store you might not use the tape at these spans, the larger tape measures offer more rigid tapes that will not flop around and slip off the end of boards. Measuring when you are by yourself will be a lot simpler, and naturally, quality tape steps can last for several decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the timber. Avoid oversize carpenter’s pencils. Their large flat leads are just too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools will help you in marking the right angles in addition to chemical angles. Also, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I discover the Robertson format works best for many woodworking projects and will be the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood files. The expense of glue through all of your projects is a minor cost consideration. Therefore, it makes sense to go with the very best. I also have found over time that I receive the best results with both indoor and outdoor projects once I use quality outdoor grade glue. All these resin-based compounds unlike conventional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Free Woodworking Plans To Download

The peaceful gratification of woodworking is a wonderful adventure in this era of rushed lives, smartphones, and time-starved careers. With a minimal investment at the most rudimentary tools and equipment, anyone can learn the rewarding abilities of his time-tested avocation and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Maker culture

The maker culture is a contemporary culture or subculture representing a technology-based extension of DIY culture[citation needed] that intersects with hacker culture (which is less concerned with physical objects as it focuses on software) and revels in the creation of new devices as well as tinkering with existing ones. The maker culture in general supports open-source hardware. Typical interests enjoyed by the maker culture include engineering-oriented pursuits such as electronics, robotics, 3-D printing, and the use of Computer Numeric Control tools, as well as more traditional activities such as metalworking, woodworking, and, mainly, its predecessor, the traditional arts and crafts. The subculture stresses a cut-and-paste approach to standardized hobbyist technologies, and encourages cookbook re-use of designs published on websites and maker-oriented publications.[1][2] There is a strong focus on using and learning practical skills and applying them to reference designs.[3] There is also growing work on equity and the maker culture.

Maker culture emphasizes learning-through-doing (active learning) in a social environment. Maker culture emphasizes informal, networked, peer-led, and shared learning motivated by fun and self-fulfillment.[4] Maker culture encourages novel applications of technologies, and the exploration of intersections between traditionally separate domains and ways of working including metal-working, calligraphy, film making, and computer programming. Community interaction and knowledge sharing are often mediated through networked technologies, with websites and social media tools forming the basis of knowledge repositories and a central channel for information sharing and exchange of ideas, and focused through social meetings in shared spaces such as hackspaces. Maker culture has attracted the interest of educators concerned about students’ disengagement from STEM subjects (science, technology, engineering and mathematics) in formal educational settings. Maker culture is seen as having the potential to contribute to a more participatory approach and create new pathways into topics that will make them more alive and relevant to learners.

Some say that the maker movement is a reaction to the de-valuing of physical exploration and the growing sense of disconnection with the physical world in modern cities.[5] Many products produced by the maker communities have a focus on health (food), sustainable development, environmentalism and local culture, and can from that point of view also be seen as a negative response to disposables, globalised mass production, the power of chain stores, multinationals and consumerism.

Video: Woodworking Tools