Free Woodworking Projects And | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable thoughts and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes along with a few petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an instructor and a member of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they’re following because most of the thoughts and projects Ted’s source are easy to understand and easy. Ted McGrath spent two years researching so he could collect enough material for an extensive package, and he ended up making a really’complete’ woodworking resource.

Many might still seem unsure whether they need to be buying Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it even more challenging to make the ideal option. There are in fact lots of things that place Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit out of Ted’s woodworking Package. People who are only getting started will discover the ideas and projects in Ted’s bundle quite simple. Without doubt, intricate carpentry is demanded; nonetheless, they will discover that it’s really easy to follow Ted’s easy step by step directions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page source which helps beginners learn a whole lot about woodworking. They will also have the ability to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers are going to have the ability to find any job of their choice within this package quite readily, though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and those who buy it’ll be endorsed by a 60-day guarantee, so when this woodworking bundle fails to satisfy them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large dimensions. Nonetheless, using a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nevertheless, they didn’t mind being overwhelmed considering the fact that this package is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design bundle is so thorough and vast that it contains pretty much every woodworking project a woodworker might be interested in building.

This woodworking package created by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking bundles that can be found across the internet. Ted has done his very best to guide them in every possible way he could, through simple to understand textual instructions, clear images and even videos too.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking projects they will find within. So, it’s certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more woodworking hand tools and more woodworking power tools , but the idea is to buy the crucial hand and power tools which beginners will need. You can always increase your toolbox as you gain experience!

Free Woodworking Projects And Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you have purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to complete your project. However, if you’re unsure about what to do there is help available! There are lots of areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Each month the writers in woodworking publications do a story about the best way best to improve your woodworking craft. When it is showing you how to apply a finish to a finished project, or how to create a mortise and tenon joint, something new could be heard each month. Next, is purchasing instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Free Woodworking Projects And

If you’re a beginner and very enthusiastic about doing a DIY project for home then, woodworking can be fun. If you don’t have the right information, education, and skill, you might wind up spending more money and time than you initially meant to spend. As a novice woodworker, you need to have time and the correct tools. Having said, there are a couple of essential factors you should keep in mind, before starting with any woodworking project.

1. If you are just beginning, you must first need to be somewhat interested in woodworking. Creating something new with your hands is a particular feeling. Do not begin a job if you are not interested, because this might land you at a terrible place.

2. Consider the primary reason behind creating this woodworking project. Decide on the uses of the item you’re making.

3. Consider your skills and analyze the time you have, before you start with a job.

4. Start projects that you can complete. If you’re in the midst of some work, then it is better to not begin any project at all.

Starting Your First Woodworking Shop Free Woodworking Projects And

If you keep those vital things in mind before beginning a woodworking project, it will become very simple for you to reach success. Woodwork requires planning as much as it requires effort. So how can you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to choose the woodworking jobs that you wish to start with. As a beginner, always pick a job that has a very basic construct up or a very simple structure. A few simple to begin projects include, bird feeder, chairs, shelves, etc.. The moment you find the techniques, you could always proceed into the next level of woodworking projects, such as cupboards, sheds, and others. Beginning projects should always keyword be complicated and less bothersome so you have a better knowledge of working with forests and their tools. When the project is selected, start selecting your tools.

Beginners Woodworking Tools, Free Woodworking Projects And

Tools are the ways whereby you will win the battle of woodworking. A lot of men and women think that power tools are requires. But for beginners, basic hand tools can be very convenient and more than helpful in completing a job. If woodworking is the hobby, then some tools that you would require would be:

1. Workbench – A workbench is needed for precise cuts and measurements. Even the workbench, when fixed with vises, offer ample space to work. As a key tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make matters much easy for you. When you purchase a hammer, constantly assess the balance between the weight and stand. Always pick a hardy, yet lightweight item.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws out there on the marketplace. Decide on a size which you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian kinds and standard flat type. Having all of them can help you in advance woodworking. You might also purchase keyword energy screwdrivers since they make the work much faster.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape gives you the capacity to measure wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you demand a wrench. Nonetheless, this isn’t a tool for beginners, but using it might make work simpler for you in a later stage.

7. Drill – Drill helps you create holes in wood. Power drills are more helpful but they cost more. Low wattage power drills can make the job much easy.

8. Other small and basic tools – These include pencils, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is no fixed price on woodworking jobs. Dependent on the sort of job you want to complete, pricing could be determined. The easy the job, the less cost it involves. But at the beginning purchasing the tools will be somewhat hefty. Therefore, it’s much better to fix a budget first on the resources, then keyword on the undertaking. Buying the fundamental tools will ensure that you do not have to buy any more material aside from the wood ply.

Time and Instructions

Instructions are one of the primary things which each and every beginner should follow. It’s like the woodworking Bible. Instructions manual is quite easy to understand the procedure, what to do and the way to do it. It keyword is a systematic manual for finishing the project. Time also has a significant role in the building of woodworking projects. Woodworking projects require time and therefore it’s necessary for a beginner to have ample quantity of time weekly.

Tips and Tricks for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most indispensable thing keyword which will help you to achieve success is proper preparation. With proper planning and a plan, it is likely to achieve success immediately. If you know the objective of woodworking, the thing that you want to construct, the tools you require in order to possess and the typical time it’s possible to devote every day; then you are ready to go.

Conclusion, Free Woodworking Projects And

All these strategies and instruction is likely to make the woodworking projects and plans for novices quickly to finish. Always ensure that you have all the vital tools, materials, area ready. Read the instructions for building an item handy. Proper strategy and planning will help you to earn a great woodworking job for your property.

|

How to Become a Master Woodworker From Your Own Home Free Woodworking Projects And

Folks when trying to find a way to pass time or desire an alternative way to make money they usually turn into a hobby they enjoy. Woodworking is one of the hobbies individuals turn to perform as a hobby or home based company. It’s very exciting to do and everyone can begin.

When doing woodworking at home there are lots of jobs one can think of. When starting out you need to be quite cautious when choosing which job to begin with because there are projects that can be too difficult for a beginner. But don’t be concerned about that because we are going to give you tips on the right means to begin woodworking as a beginner.

The same as any other hobby woodworking demands some working equipment, therefore before you choose your project you have to be aware of if you have the available tools to work on such a project. Try not to invest a lot of cash on buying gear when starting out, buy more gear as you get more experience and become an expert carpenter. Should you enjoy your hobby then there’ll not be any difference between the hand as well as the hands.

The Benefits of Woodworking Free Woodworking Projects And

Woodworking at home will give you time to explore different jobs and learn so many things. That’s why it’s very important to invest less money when starting out so that you can afford to make errors and at any time learning about various projects.
It’s very important you know about different kinds of wood available for creating projects. Anticipate carpenters use several types of wood quality for decorating bits, learning what type of wood they use will allow you to prepare the wood you’ll need for specific projects you might want to pursue.
Once you know the basics of wood choice and the use of different tools now you can employ them in cutting well wood pieces and placing wood together. Knowing what to do can help you in building good projects to fulfill your wants.

Free Woodworking Projects And practice makes perfect so make sure that you practice your work daily if at all possible. Try out lots of layouts using various tools so you may find the hang of using the tools. When starting out you may make a number of errors but with time you will learn how to properly utilize them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Free Woodworking Projects And

Woodworking as a hobby may be one of the most rewarding experiences you will ever enjoy. You may get started on a shoestring with a minimum amount of tools and equipment. A little home workshop may produce a wide array of simple projects that will help you develop your creative and building skills while rewarding you with practical and artistic wood products which you are able to enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let us discuss where you’ll perform your woodworking, based on the size of your house, you might be able to create a dedicated space into your woodworking activities. This might be a reserved place on your garage or in your basement. In some cases, a detached shed or outbuilding may be perfect to prepare your first store. A heated shop detached from your house provides one distinct advantage: better dust control. Without sophisticated dust control systems, basement assignments will inevitably create dust that travels to the living area of your house. This is particularly true in homes with forced air heating systems where cold air returns found in the basement draw dust up into the top levels of the home. Another advantage of detached workshops would be, of course, the sound level. It’s possible to work without disturbing the rest of the household. A good compromise could be the garage of your property.

This might help decrease the difficulties of dust and sound, however depending on where you reside, a keyword garage layout may not be sensible during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Free Woodworking Projects And

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes that they add more space to function in. Free Woodworking Projects And if you can have a dedicated place for a marathon all the greater. Floor gear and bench top gear can remain in position from project to project. If this installation isn’t impossible, at least try to create a bench area where equipment could be stored and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and equipment. At the beginning, set up a bench area where you are able to store and use most of your equipment, using a temporary expansion of your activities onto the basement or garage floor.

A basic workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. Insert a sturdy shelf below the bench to home your hands power tools and a pegboard over the bench to hang other gear. Put in a woodworking vice at one end of your seat on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Free Woodworking Projects And

The scope of your start-up equipment will be largely based on your financial plan. Whether you have got big financial resources or you are starting on a shoestring always buy quality gear. If you can afford it, buy your quality tools at the local building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or alternative local advertisements. You will find plenty of quality gently used programs out there that belong to individuals who embarked on that 1 molding project around the house or received tools as gifts that they will never use. You can usually buy tools for these sellers for less than half of the original cost and save even more money should you create a package deal for all their unused equipment. Of course, getting tools from private individuals will take additional time and possibly travel expenditures. Weigh the advantages of traveling across town to save a few extra dollars on a cheap piece of gear. The excess cost of travel and time in these scenarios is usually justified when purchasing large ticket items such as table saws, bandsaws or high finished tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimum quantity of hand equipment yet generated sophisticated and intricate bits. Concentrate on developing your abilities with your start-up set of tools and avoid lamenting about the gear you wished you had.
Here is a listing of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses that also offer you some side protection for your eyes. Purchase a quality acrylic collection that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually hamper your vision and affect safety. Avoid wearing goggles at a workshop. Most impair vision and dust up quickly. You may avoid wearing them all together if you find them uncomfortable.

The next bit of critical safety equipment that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking may be noisy and long-term exposure to these noise levels can affect hearing and lead to tinnitus and other hearing losses. I’m keeping the dust from my hair. I’m good to go!

Power Hand Saw: Often known as a skill saw following the popular name, this can prove to be the most flexible tool in a startup workshop. In reality, at the hands of an expert, a power hand saw could be employed to build an whole property. As mentioned before get a quality manufacturer saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you start your second project. After selecting the right saw put in an excellent blade. Most saws come with a starter blade of lesser quality even if they’re a good saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Begin with a hybrid blade. All these possess a balanced enamel count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument cannot just cut curves. It is perfect for cutting holes in wood also like manage slots. At some point, you’ll want to obtain a ring saw. Bandsaws are much more versatile but a excellent floor unit could be costly. A jigsaw may be a fantastic stop gap for the novice woodworker.

Buy an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck within the standard 3/8 inch model. Down the street, the 1/2 inch version will prove to be versatile. Through tough lessons learned, I have found that purchasing quality, in this scenario, is much more critical than ever. Cheaper drills have a tendency to get very short run times and have to be recharged often. Their battery life will be bad and to make things worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t want on your workshop. Buy an range of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Create a habit of returning every drill bit to its potential slot at the holder after every use. Lastly, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer stays as the most flexible tool in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop injuries occur. Even though the most frequent, hammer injuries are often of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and features a comfortable grip. Most hammers in the high tech range offer ceramic or metal handles. Cheaper hammers usually have wood grips with poor joints between the handle and head. The mind usually comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce range for general work and also a smaller completing hammer for more complex work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These kinds of hammers are more appropriate to rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can manage pretty much any sanding requirements you have as a novice woodworker. As your woodworking abilities evolve, you will likely update to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface area. As you embark on the first few projects you might discover that your palm sander with a bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and form rough planks using 100 grit paper and later finish your job with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets with an extra source of 100 grit paper. You’ll find this caliber of paper the most versatile on your shop.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Though low tech in theory, these tools allow you to taper borders, sew high stains and fix any imperfections in wood pieces. {Start with a standard number 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold down your wood bits as you work on them. Unfortunately, good clamps are expensive and it normally takes the beginner woodworker a couple of years to collect a detailed set of wood clamps. Start with a set of long”pipe” clamps. Now the pipe has been replaced with long steel shafts, however, the structure remains the same. Receive a pair of the maximum clamps which you can spend. You may get in touch with them for smaller glue jobs and enlarge them to their entire length for bigger jobs.

Shop Vice: A store vice installed in the end of the seat is perfect for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the better vices offer you rapid release mechanisms that enable the consumer to quickly open and close the limbs with no tedious handle turning. The wood clamping surfaces in your vice will periodically require replacement. I would rather utilize soft pine in my vices that won’t crush or damage lots of the various forests that I utilize. Whether I am working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of your most frequently used tools. Buy a fantastic quality name brand tape measure with a broad tape typically in the 25-foot selection. Even though in your store you might not be using the tape at these lengths, the bigger tape steps offer more rigid tapes that won’t flop around and slide off the ending of planks. Assessing when you’re by yourself will be a lot simpler, and of course, quality tape measures can endure for many years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the wood. Avoid oversized carpenter’s pencils. Their big flat leads are simply too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools can assist you in marking the ideal angles as well as compound angles. Also, get an range of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find the Robertson format works best for most woodworking jobs and is the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood documents. The cost of glue through all of your jobs is a little cost consideration. Therefore, it is sensible to go with the very best. I also have found over time that I receive the best results with both indoor and outdoor jobs once I use quality outside grade glue. All these resin-based compounds unlike conventional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Free Woodworking Projects And

The peaceful gratification of woodworking is a wonderful experience in this era of hurried lives, smart phones, and time-starved livelihood. With a minimal investment at the most rudimentary tools and equipment, everyone can learn the rewarding abilities of his time-tested hobby and revel in job after project!

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

  • NKBA Behavior Study Details Kitchen Habits and Impact on Design

    HACKETTSTOWN, N.J. —  How do people really use their kitchens? This is what the National Kitchen & Bath Association (NKBA) endeavored to find out in its latest market research, which offers a detailed analysis into the evolving way homeowners live in their kitchens and how this drives remodeling preferences in the $74 billion kitchen market.
     
    The Lifestyle Segmentation Report, released this month, identifies homeowner attitudes and behaviors regarding cooking, meal preparation, entertaining and kitchen design, and the influence of their lifestyles on the kitchen remodel and installation process.
     
    The national online survey was conducted among nearly 800 adults with household income of $40,000 or higher who had remodeled their kitchen or planned to remodel between November 2016 and August 2018. The survey segmented respondents by their confidence levels regarding cooking abilities, confidence in their kitchen design abilities, and their comfort level with using technology in the kitchen.
     
    “This exclusive research is somewhat of a departure from our traditional studies, which typically analyze product categories, design trends, size of the market and business projections,” said Bill Darcy, NKBA CEO. “It’s the first time we are looking at how changes in consumer lifestyle impact the actual use of our industry’s product and services. The data provides valuable insight for designers, remodelers, dealers, showroom associates and other professionals in how they serve their clients. This commitment to research and analysis reinforces NKBA’s thought leadership in the marketplace, and offers strategic information for the benefit of our membership.”
     
    The report provides data on family dining, meal preparation, entertaining and other activities occur in the kitchen (paying bills, homework, and more). Also reported is how homeowners use technology in the space and what storage needs they require. Furthermore, the study offers a correlation between these elements and design, the need for professionals in the process, how and where consumers shop for and buy kitchen products, and more.
     
    The full Lifestyle Segmentation Report is available for purchase at the NKBA store. For more information, click on NKBA-Lifestyle-Segmentation-Report or NKBA-Lifestyle-Segmentation-Executive-Summary.
     
     The National Kitchen & Bath Association (NKBA) is the not-for-profit trade association that owns the Kitchen & Bath Industry Show® (KBIS), as part of Design & Construction Week (DCW). With nearly 14,000 member companies representing tens of thousands of members in all segments of the kitchen and bath industry, the NKBA has educated and led the industry since the association’s founding in 1963. The NKBA envisions a world where everyone enjoys safe, beautiful and functional kitchen and bath spaces. The mission of the NKBA is to inspire, lead and empower the kitchen and bath industry through the creations of certifications, marketplaces and networks. For more information, visit www.NKBA.org  

Wood veneer

In woodworking, veneer refers to thin slices of wood, usually thinner than 3 mm (1/8 inch),[1] that typically are glued onto core panels (typically, wood, particle board or medium-density fiberboard) to produce flat panels such as doors, tops and panels for cabinets, parquet floors and parts of furniture. They are also used in marquetry. Plywood consists of three or more layers of veneer. Normally, each is glued with its grain at right angles to adjacent layers for strength. Veneer beading is a thin layer of decorative edging placed around objects, such as jewelry boxes. Veneer is also used to replace decorative papers in Wood Veneer HPL. Veneer is also a type of manufactured board.

Veneer is obtained either by "peeling" the trunk of a tree or by slicing large rectangular blocks of wood known as flitches. The appearance of the grain and figure in wood comes from slicing through the growth rings of a tree and depends upon the angle at which the wood is sliced. There are three main types of veneer-making equipment used commercially:

Each slicing processes gives a very distinctive type of grain, depending upon the tree species. In any of the veneer-slicing methods, when the veneer is sliced, a distortion of the grain occurs. As it hits the wood, the knife blade creates a "loose" side where the cells have been opened up by the blade, and a "tight" side.

Video: Woodworking Projects