Free Woodworking Shop Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable ideas and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and some of those attributes alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, himself is also an educator and a part of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking whenever they are after because most of the ideas and projects Ted’s source are simple to comprehend and easy. Ted McGrath spent two years researching so that he could collect enough material for an extensive package, and he ended up creating a truly’complete’ woodworking resource.

Many might still seem unsure whether they need to be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it more difficult to make the ideal choice. There are in fact many things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit from Ted’s woodworking Package. People who are only getting started will discover the thoughts and jobs in Ted’s bundle quite easy. No doubt, intricate carpentry is involved; however, they will find it really easy to follow Ted’s easy step-by-step instructions. Presently, both beginner and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource which helps beginners learn a whole lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will be able to locate any job of their choice within this package quite readily, though there so many options.

60-Day Iron Clad Money Back Guarantee

In general, this product is and those who buy it will be endorsed by a 60-day warranty, so when this woodworking package fails to satisfy them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down because of its large size. Nonetheless, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overrun considering the fact that this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design bundle is so thorough and vast it contains just about every woodworking project a woodworker may be interested in building.

This woodworking bundle made by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking bundles that are available across the net. Ted has done his very best to guide them in every possible way he can, through simple to understand textual directions, clear images and even movies as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking projects they will find inside. So, it is certainly worth buying!

The Benefits of Woodworking Free Woodworking Shop Plans

Woodworking is one hobby that could also be a rewarding profession if you like to work with your hands and build beautiful pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a fine woodworking craftsman, you will be able to construct all kinds of furniture, (table, beds, and chairs), with ease. After that you can sell your completed woodworking projects and make a handsome profit. Free Woodworking Shop Plans.

It requires time to become skilled in the craft of woodworking. The nice thing about working up to this expert craftsman degree is you’ll have the ability to build some really wonderful furniture to you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit on your living space. It’ll be a topic of conversation when you have friends come over to visit. They will ask: How did you make it? Where did you get the woodworking plans? How long can it take to complete the job? What type of tools did you use? How on earth did you make such a beautiful item of furniture? As you speak about your work, a sense of pride will encounter you and don’t be surprised if your friends ask you to make one for them too!

How to Become a Master Woodworker From Your Own Home Free Woodworking Shop Plans

If you’re thinking you are just too old or too young for woodworking, think again! You’re never too old or too young for such an enjoyable hobby and it is ideal for beginners!

Where to begin in Woodworking? Free Woodworking Shop Plans.

Start with an idea in mind of what you would like to build and then get a excellent woodworking project plan that is geared toward novices. There are several little woodworking projects for novices available for purchase from online woodworking merchants. Of course, you can begin with as grand a woodworking plan as you choose. On the other hand, the chances are if you begin with a little woodworking job initially, you will get a better chance of keyword completing the job.

Your woodworking project plan should incorporate some lists! Lists of: woodworking equipment, the quantity and variety of wood needed, and the essential hand tools and power tools to complete the undertaking. Note: A word of caution about buying woodworking tools. Only buy what you want to complete your immediate or upcoming project. This is important especially if you are a beginner and just starting out. Tools are not cheap. The newcomer needs good woodworking tools, but it is simple to break the bank purchasing a lot of tools you might not use all that frequently. When you do buy gear, buy quality. Do a little research and compare goods. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, finish punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking straps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and do not overlook the wood glue and a brush to spread the wood adhesive! Obviously, you will need a dry place to work and might need a set of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more innovative hand tools and much more woodworking power tools , but the concept is to buy the essential hand and power tools which beginners will need. You may always increase your arsenal as you get experience!

Free Woodworking Shop Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to finish your project. But if you’re unsure about what to do there is help available! There are lots of places that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of those many woodworking magazines available. Every month the writers in woodworking publications do a story about the best way best to increase your woodworking craft. When it is showing you how to apply a finish to a completed project, or how to create a mortise and tenon joint, something new could be learned every month. Next, is buying educational DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to work with a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Free Woodworking Shop Plans

If you are a beginner and very interested in doing a DIY job for home then, woodworking could be fun. If you do not have the proper information, instruction, and skill, you might land up spending more time and money than you originally meant to spend. As a novice woodworker, you want to have time and the appropriate tools. Having mentioned, there are a few essential factors you should remember, before beginning with any woodworking project.

1. If you’re just beginning, you should first have to be very interested in woodworking. Making something new with your own hands is a special feeling. Don’t start a job if you’re not interested, because this might land you in a terrible place.

2. Consider the main reason behind making this woodworking project. Decide on the uses of this thing you are making.

3. Consider your abilities and analyze the time you have, until you start with a job.

4. Start jobs that you’re able to finish. If you’re in the midst of a work, then it’s wise to not begin any project at all.

How to Become a Master Woodworker From Your Own Home Free Woodworking Shop Plans

If you maintain these vital things in your mind before beginning a woodworking project, it will become very simple for you to reach success. Woodwork requires planning as much as it takes effort. So how can you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to opt for the woodworking projects that you wish to begin with. As a beginner, always select a job which has quite a basic construct up or a simple construction. Some simple to begin projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find these techniques, you could always proceed into the next level of woodworking jobs, such as cabinets, sheds, and others. Beginning projects should keyword be complicated and less frustrating so you have a better knowledge of working with forests and their resources. When the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Free Woodworking Shop Plans

Tools would be the ways whereby you will win the struggle of woodworking. Many people think that power tools are needs. But for novices, basic hand tools can be quite handy and more than useful in completing a job. If woodworking is your hobby, then some tools that you would require are:

1. Workbench – A workbench is required for exact cuts and dimensions. The workbench, when mended with vises, provide ample space to operate. As a key tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things much easy for you. When you buy a hammer, constantly assess the equilibrium between the weight and endure. Always select a hardy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool helps you to cut woods at different sizes. There are different types of saws available on the market. Decide on a size which you could handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them can help you in advance woodworking. You might also buy keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. Nonetheless, this isn’t a tool for beginners, but having it would make work simpler for you in a subsequent stage.

7. Drill – Drill helps you create holes in wood. Power drills are more helpful but they cost more. Low wattage power drills will make the task much simple.

8. Other small and fundamental tools – These include pencils, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed price on woodworking projects. Dependent on the type of job you would like to finish, pricing could be determined. The simple the job, the less price it involves. However, at the beginning purchasing the tools will be somewhat hefty. Therefore, it’s better to resolve a budget first on the tools, then keyword on the undertaking. Buying the basic tools will ensure that you don’t have to purchase any more material other than the wood ply.

Time and Directions

Directions are one of the principal things which each and every beginner should follow. It’s like the woodworking Bible. Instructions guide is quite simple to comprehend the process, what to do and the way to do it. It keyword is a systematic manual for finishing the job. Time also plays a significant role in the building of woodworking jobs. Woodworking projects require time and so it is necessary for a novice to have ample amount of time every week.

Ideas for Beginners

There are no quick tips or suggestions that will make the work easy. Nevertheless, the most indispensable thing keyword which can help you to reach success is proper planning. With proper planning and a strategy, it is likely to achieve success immediately. If you know the purpose of woodworking, then the thing that you want to build, the tools you need in order to own and the average time it’s possible to devote every day; then you’re all set to go.

Conclusion, Free Woodworking Shop Plans

These tips and instruction is likely to create the woodworking projects and plans for beginners fast to finish. Always make sure that you have all the essential tools, materials, area prepared. Keep the instructions for building a product handy. Appropriate strategy and preparation can help you to make a fantastic woodworking project for your home.

|

How to Become a Master Woodworker From Your Own Home Free Woodworking Shop Plans

People if you’re trying to find a way to pass time or desire an alternative method to generate money they generally turn to a hobby they enjoy. Woodworking is one of those hobbies individuals turn to perform as a hobby or home based business. It’s very exciting to do and anyone can begin.

When doing woodworking at home there are a lot of jobs one can think of. When starting out you have to be quite cautious when choosing which project to start out with since you will find jobs which can be too tough for a beginner. But do not worry about that because we will provide you guidelines on the right way to start woodworking as a beginner.

Just like any other hobby woodworking requires some working gear, therefore before you choose your job you have to be aware of whether you have the available tools to work on that job. Try not to spend a good deal of cash on purchasing equipment when starting out, purchase more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there’ll not be any gap between the hand and the normal hands.

How to Become a Master Woodworker From Your Own Home Free Woodworking Shop Plans

Woodworking in your home will give you time to research unique jobs and find out so many things. That is why it’s important to invest less money when starting out so you can manage to make mistakes and at any time learning about various jobs.
It’s extremely important that you know more about the different kinds of wood available for creating jobs. Anticipate carpenters utilize several kinds of wood quality for decorating bits, learning which kind of wood that they use will allow you to prepare the wood you will need for specific jobs you may choose to pursue.
Once you know the basics of wood choice and the usage of different tools you can now implement them in cutting well wood pieces and placing wood together. Knowing what to do can help you in building good projects to satisfy your needs.

Free Woodworking Shop Plans practice makes perfect so make sure that you practice your work daily if possible. Try out a lot of layouts utilizing a variety of tools so you may find the hang of using the tools. When starting out you can make a range of errors but with time you will learn how to correctly utilize them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Free Woodworking Shop Plans

Woodworking as a hobby may be one of the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimal number of tools and equipment. A small home workshop may generate a wide variety of simple projects that can allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products that you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s talk about where you will do your woodworking, based on the dimensions of your house, you may have the ability to create a dedicated space to your woodworking activities. This might be a reserved place on your garage or on your cellar. In some cases, a detached shed or outbuilding might be ideal to set up your first shop. A heated shop detached from your house offers one distinct advantage: better pest management. Without sophisticated dust control methods, basement workshops will inevitably produce dust which travels to the living area of your house. This is very true in homes with forced air heating systems where cold air yields found in the basement draw dust up into the upper levels of the home. Another benefit of detached workshops is, of course, the noise level. You can work without bothering the rest of the household. A fantastic compromise might be the garage of your home.

This can help decrease the difficulties of dust and noise, however depending on where you reside, a keyword garage layout may not be sensible during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Free Woodworking Shop Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes that they include more space to work in. Free Woodworking Shop Plans if you can have a dedicated place for a marathon all the greater. Floor gear and bench top equipment can stay in place from project to project. If this setup isn’t hopeless, at least attempt to create a bench area where equipment can be saved and pulled out as needed. If at all possible plan for inevitable growth as you acquire more tools and gear. At the start, establish a bench area where you can shop and use most of your equipment, using a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. This will let you work comfortably while standing. Add a sturdy shelf below the bench to house your hand power tools and a pegboard above the seat to hang other equipment. Put in a woodworking at one end of the seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Free Woodworking Shop Plans

The scope of your startup equipment will be mostly based on your budget. Whether you have got large financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, buy your quality tools at your regional building and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or alternative regional ads. You will find an abundance of quality lightly used tools out there that belong to people who embarked on that one molding job around the home or received tools as presents which they won’t ever utilize. You can usually purchase tools for all these sellers for under half the original price and save even more money if you make a bundle deal for all their unused equipment. Of course, getting tools from private individuals will take additional time and possibly travel expenses. Weigh the benefits of traveling across town to save a couple added bucks on a inexpensive piece of equipment. The excess expense of time and travel in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or high finished tools like surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimum quantity of hand gear yet generated sophisticated and complex pieces. Concentrate on developing your skills with your start-up set of tools and avoid lamenting about the gear you wished you’d.
Here is a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as expected by eye protection. Get a nice pair of safety glasses which also offer some side protection for your eyes. Buy a quality acrylic set that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually hamper your vision and influence safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You can avoid wearing them all together if you find them uncomfortable.

The next bit of critical safety gear that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking can be noisy and long-term exposure to those noise levels can affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most employees tire faster when subjected to elevated noise levels. Select powerful hearing protection that you find comfortable and effective. These can contain earplugs or full ear keyword muff protectors. I find that a excellent pair of ear muff guards is ideal for hearing protection.

Lastly, put on a cap to keep the dust out of your hair. With this set up I’m protecting my eyes and my ears. I am keeping the dust out of my hair. I am all set!

Power Hand Saw: Frequently referred to as a skill saw following the favorite brand name, this may end up being the most flexible instrument in a startup workshop. In reality, at the hands of a professional, a power hand saw can be employed to construct an entire house. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you start your next job. After selecting the proper saw install an excellent blade. Most skill saws come with a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Begin with a hybrid blade. These possess a balanced enamel count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument cannot only cut curves. It is ideal for cutting holes in timber also like manage slots. At some point, you’re going to want to obtain a ring saw. Bandsaws are even more versatile but a excellent floor unit can be expensive. A jigsaw can be a good stop gap to the novice woodworker.

Buy an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the conventional 3/8 inch version. Through tough lessons learned, I have discovered that purchasing quality, in this case, is more critical than ever. Cheaper drills have a tendency to have very short run times and need to be recharged frequently. Their battery life tends to be poor and to make things worse keyless chucks come loose and slip often. This is 1 annoyance you don’t want on your workshop. Purchase an assortment of superior carbide tipped drill bits which are kept in a holder labeling each drill bit size. Create a habit of returning every drill piece to its prospective slot at the holder after each use. Lastly, get a set of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible instrument in the store, and frequently the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop injuries happen. Although the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and comes with a comfortable grip. Most hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The mind usually comes loose and the tool becomes useless. Pick a name brand quality hammer at the 16-ounce scope for overall work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers in the workshop and any with dimpled mind tips. These kinds of hammers are more suited for rough framing tasks and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can handle pretty much any trimming requirements that you’ve got as a novice woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor version disc and belt sander. But for the time being, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited amounts of surface area. As you embark on the first few projects you might discover that your palm sander using just a bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and form rough boards using 100 grit paper and later finish your job with 200 or even 300 grit paper. Buy an range of sandpaper sheets using an extra source of 100 grit paper. You’ll find that this grade of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Although low tech in concept, these tools enable you to taper edges, flatten high spots and correct any imperfections in timber bits. {Begin with a typical number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood bits as you operate on them. Unfortunately, good clamps are costly and it normally requires the beginner woodworker a couple of years to accumulate a comprehensive set of timber clamps. Begin with a set of extended”pipe” clamps. Today the pipe has been replaced with extended steel shafts, but the structure remains the same. Get a set of the longest clamps which you could afford. You may contact them for smaller glue jobs and expand them to their entire length for bigger jobs.

Shop Vice: A store vice installed in the end of your seat is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices with their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enabled the user to quickly open and close the jaws without tedious handle turning. The wood clamping surfaces on your vice will periodically need replacement. I prefer to use soft pine in my vices that will not crush or damage many of the various forests that I utilize. Whether I am working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among the most often used tools. Purchase a fantastic excellent name brand tape measure with a wide tape usually in the 25-foot range. Even though in your shop you might not use the tape at these spans, the bigger tape measures provide more rigid tapes that won’t flop around and slide off the end of boards. Assessing when you are by yourself will be a lot easier, and of course, quality tape steps can last for several decades.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood. Avoid oversized carpenter’s pencils. Their large flat leads are simply too coarse for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools will help you in marking the right angles in addition to compound angles. Get the number two and three Robertson set. I discover that the Robertson format works best for many woodworking jobs and will be the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood files. The expense of adhesive through all of your projects is a minor cost consideration. For that reason, it makes sense to decide on the very best. I also have found over the years that I get the best results with both indoor and outdoor projects when I use quality outdoor grade glue. These resin-based compounds unlike conventional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Free Woodworking Shop Plans

The peaceful gratification of woodworking is an excellent adventure in this era of hurried lives, smartphones, and time-starved careers. With a minimum investment in the most basic tools and equipment, anyone can learn the rewarding abilities of his time-tested hobby and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Drawknife

A drawknife (drawing knife, draw shave, shaving knife)[1] is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer (along the cutting edge) than it is deep (from cutting edge to back edge). It is pulled or "drawn" (hence the name) toward the user.

The drawknife in the illustration has a blade 23 centimetres (9.1 in) although much shorter drawknives are also made. The blade is sharpened to a chisel bevel. Traditionally, it is a rounded, smooth bevel. The handles can be below the level of the blade (as in the illustration) or at the same level.[2]

A drawknife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves.

Video: Woodworking Tools