Free Woodworking Tools | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable ideas and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and some of those qualities alongside a few petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking whenever they are after because all the thoughts and jobs Ted’s source are easy to comprehend and simple. Ted McGrath spent two years exploring so he could gather enough material for an extensive bundle, and he ended up making a really’complete’ woodworking resource.

Many might still appear unsure if they should be purchasing Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it even more challenging to make the right option. There are in fact many things that set Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. Those who are just getting started will find the thoughts and jobs in Ted’s bundle quite simple. No doubt, intricate carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s easy step-by-step directions. Currently, both beginner and experienced ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who purchase his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page source which helps beginners learn a whole lot about woodworking. They will also have the ability to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 simple woodworking ideas and woodworking projects. Woodworkers will have the ability to locate any job of their choice in this package quite easily, even though there numerous options.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and those who buy it’ll be endorsed by a 60-day guarantee, so when this woodworking bundle fails to meet them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down because of its large dimensions. Yet, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nonetheless, they didn’t mind being overwhelmed considering the fact that this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking package is so thorough and vast that it contains pretty much every woodworking project a woodworker may be considering building.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that can be found across the internet. Ted has done his very best to direct them in every possible way he could, through easy to understand textual directions, clear images and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking jobs they will find inside. So, it’s certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more woodworking hand tools and much more woodworking power tools , but the concept is to purchase the crucial hand and power tools which novices will need. You may always add to your toolbox as you gain experience!

Free Woodworking Tools Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you have bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to finish your project. But if you’re unsure about what to do there is help available! There are several places that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of the several woodworking magazines available. Each month the writers in woodworking publications do a story on the best way to increase your woodworking craft. Whether it’s showing you how you can apply a finish to a completed project, or how to create a mortise and tenon joint, something new could be heard every month. Next, is purchasing instructional DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Free Woodworking Tools

If you are just beginning and very enthusiastic about doing a DIY job for home then, woodworking can be interesting. If you do not have the proper information, instruction, and skill, you might wind up spending more money and time than you originally intended to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a few essential aspects that you should keep in mind, before starting with any woodworking project.

1. If you’re a beginner, you should first have to be somewhat interested in woodworking. Creating something new with your hands is a particular feeling. Do not begin a project if you are not interested, because this might land you in a bad place.

2. Consider the primary reason behind making this woodworking project. Decide on the uses of this thing you are making.

3. Consider your abilities and analyze the time you have, before you start with a job.

4. Start projects that you’re able to complete. If you are in the midst of some work, then it is wise not to begin any project in any way.

How to Become a Master Woodworker From Your Own Home Free Woodworking Tools

If you keep these vital things in your mind before you begin a woodworking project, it will become very simple for you to achieve success. Woodwork requires preparation as much as it takes effort. So how do you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to opt for the woodworking projects that you wish to start with. As a newcomer, always pick a job which has a very basic construct up or a very simple structure. Some easy to start projects comprise, bird feeder, chairs, shelves, etc.. The moment you get hold of the techniques, you can always move into the next level of woodworking jobs, such as cupboards, sheds, along with others. Beginning projects should keyword be complicated and less bothersome so that you have a better knowledge of working with forests and their tools. When the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Free Woodworking Tools

Tools are the means whereby you will win the battle of woodworking. Many people believe power tools are needs. But for novices, basic hand tools can be very handy and more than useful in completing a job. If woodworking is the hobby, then some tools that you would require are:

1. Workbench – A workbench is required for exact cuts and dimensions. The workbench, when fixed with vises, offer ample space to work. As a primary tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make things much easy for you. When you buy a hammer, always assess the equilibrium between the weight and endure. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are various sorts of saws available on the marketplace. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Having all of them can help you ahead of time woodworking. You can even buy keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape helps you to quantify wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you require a wrench. However, this is not a tool for beginners, but having it would make work simpler for you at a subsequent stage.

7. Drill – Drill helps you make holes in wood. Low wattage power drills will make the job much easy.

8. Other small and basic tools – These include pencils, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is not any fixed cost on woodworking projects. Dependent on the sort of project that you would like to complete, pricing can be determined. The easy the project, the less cost it involves. But at the very beginning purchasing the tools will be somewhat hefty. Therefore, it is better to resolve a budget first on the tools, then keyword on the undertaking. Purchasing the fundamental tools will ensure that you don’t have to purchase any more material other than the timber ply.

Time and Instructions

Directions are among the principal things which each and every newcomer should follow. It’s like the woodworking Bible. Instructions manual is quite simple to understand the procedure, what to do and how to do it. Time also has an important part in the construction of woodworking jobs. Woodworking projects require time and so it is crucial for a beginner to have ample amount of time weekly.

Ideas for Beginners

There are no quick tips or tricks that will make the work easy. But the most essential thing keyword that will allow you to reach success is proper preparation. With proper planning and a strategy, it is likely to achieve success quickly. If you know the objective of woodworking, the item that you need to construct, the resources you need to possess and the average time you can give every day; then you are all set to go.

Conclusion, Free Woodworking Tools

All these strategies and education will create the woodworking projects and strategies for novices fast to finish. Always make sure you have all of the essential tools, materials, area ready. Read the instructions for constructing an item handy. Appropriate strategy and preparation will help you to make a great woodworking project for your property.

|

Finding Woodworking Projects and Plans for Beginners Free Woodworking Tools

People when trying to find a way to pass time or want an alternate method to make money they generally turn to a hobby that they enjoy. It’s very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of jobs one can think of. When starting out you have to be quite cautious when choosing which job to begin with since you will find jobs that can be too tough for a newbie. But do not worry about that since we will give you guidelines on the right way to begin woodworking as a beginner.

The same as any other hobby woodworking demands some working equipment, so before you pick your project you need to be aware of if you have the available resources to work on that project. Try not to spend a lot of money on buying equipment when starting out, purchase more equipment as you get more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any gap between the artistic hand and the hands.

The Benefits of Woodworking Free Woodworking Tools

Woodworking at home will provide you time to research unique projects and find out so many things. That’s why it’s very important to invest less money when starting out so you can afford to make errors and at some time learning about different jobs.
It’s very important that you know about the different types of wood available for creating projects. Anticipate carpenters utilize different kinds of wood quality for decorating pieces, learning which type of wood that they use can allow you to prepare the wood you’ll need for specific projects you might want to pursue.
Once you understand the fundamentals of wood selection and the use of different tools now you can employ them in cutting well wood pieces and putting wood together. Knowing what to do can help you in building good jobs to satisfy your needs.

Free Woodworking Tools practice makes perfect so make sure you practice your work every day if possible. Try out a lot of designs using a variety of tools so that you can get the hang of using the tools. When starting out you can earn a range of errors but with time you will find out how to properly use them and produce quality projects.

|

Starting Your First Woodworking Shop Free Woodworking Tools

Woodworking as a hobby can be among the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimum number of tools and equipment. A little home workshop may generate a broad array of simple projects that can help you develop your creative and construction skills while rewarding you with practical and artistic wood products which you are able to appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let’s talk about where you’ll do your woodworking, based on the dimensions of your house, you may have the ability to create a dedicated space into your woodworking tasks. This might be a reserved spot in your garage or on your cellar. Sometimes, a detached shed or outbuilding might be ideal to set up your very first shop. A heated store detached from your home offers one distinct advantage: better pest management. Without complex dust control methods, basement assignments will inevitably produce dust which travels to the living area of your home. This is very true in homes with forced air heating systems where cold air yields located in the basement draw up dust into the top levels of the home. Another advantage of detached workshops is, of course, the sound level. You can work without disturbing the remainder of the household. A good compromise might be the garage of your home.

This can help decrease the problems of dust and noise, however based on where you live, a keyword garage layout may not be practical during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Free Woodworking Tools

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to function in. Free Woodworking Tools if you can have a dedicated spot for a workshop all the better. Floor tools and bench top equipment can remain in place from project to project. If this setup is not impossible, at least attempt to create a bench area where equipment could be stored and pulled out as needed. If possible plan for inevitable expansion as you get more tools and gear. At the beginning, establish a seat area where you are able to shop and use most of your gear, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. This will let you work comfortably while standing. Insert a sturdy shelf below the bench to home your hand power tools along with a pegboard over the seat to hang additional gear. Put in a woodworking vice at one end of your bench on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Free Woodworking Tools

The scope of your start-up equipment will be largely based on your financial plan. Whether you have got big financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, then buy your quality tools at your regional construction and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or alternative local ads. You will find an abundance of quality lightly used tools out there which belong to individuals who stumbled on that 1 molding job around the home or received tools as gifts that they won’t ever use. You can usually buy tools for these sellers for under half the original price and save even more money should you create a bundle deal for all their unused equipment. Of course, getting tools from private people will take extra time and perhaps travel expenses. Weigh out the benefits of traveling around town to save a few extra dollars on a cheap piece of gear. The extra expense of time and travel in these scenarios is generally justified when purchasing large ticket items like table saws, bandsaws or high ended tools like surface planers in the future.
For smaller acquisitions, a trip to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimal quantity of hand equipment yet generated sophisticated and intricate pieces. Concentrate on developing your skills with your startup set of resources and prevent lamenting about the gear you wished you had.
Here’s a checklist of the useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses that also offer some side protection to your eyes. Buy a quality acrylic collection that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually impair your vision and affect security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up fast. You can avoid wearing all of them together in the event that you find them uncomfortable.

The next piece of crucial safety equipment that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking may be long-term and noisy exposure to these noise levels may affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most employees tire quicker when subjected to high sound levels. Select powerful hearing protection which you find comfortable and effective. Last, wear a cap to keep the dust out of your hair. I prefer a simple ball cap with my ear muffs and eye protection. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Frequently referred to as a skill saw after the popular name, this can end up being the most versatile instrument in a start-up workshop. In reality, at the hands of a professional, a power hand saw can be employed to build an whole property. At some point, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a budget empowers him to do cross cuts, tear cuts and even elaborate angle cuts. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. These are inclined to cut inaccurately and will burn out before you start your second project. After choosing the right saw put in a quality blade. Most skill saws include a starter blade of lower quality even if they are a good saw. Keep this blade as a copy and install a quality blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument can’t only cut curves. It’s perfect for cutting holes in timber also like handle slots. At some point, you’ll want to get a ring saw. Bandsaws are much more versatile but a excellent floor unit can be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Purchase an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss over the conventional 3/8 inch model. Through tough lessons learned, I have discovered that buying quality, in this case, is more critical than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their long-term battery life tends to be bad and to make things worse keyless chucks come loose and slip often. This is one annoyance you do not need in your workshop. Purchase an range of quality carbide tipped drill bits which are kept in a holder labeling each drill bit size. Make a habit of returning every drill bit to its prospective slot in the holder after each use. Last, get a set of tough steel driver bits. Your drill can also be a flexible screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer stays as the most flexible instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop accidents occur. Although the most ordinary, hammer accidents are usually of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The head typically comes loose and the instrument becomes useless. Pick a title brand quality hammer in the 16-ounce scope for overall work and a smaller finishing hammer for more complex work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These types of hammers are more suited for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can handle pretty much any trimming requirements that you have as a beginner woodworker. As your woodworking abilities evolve, you will likely upgrade to a floor version disc and belt sander. But for now, the ever-versatile palm sander can clean up edges, cross cuts and even limited amounts of surface area. As you embark on your first few projects you might discover that your palm sander with just a bit of effort can transform rough looking inventions into virtual functions of art! You can use your palm sander to sand and form rough boards using 100 grit paper and later finish your job with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets with an excess supply of 100 grit paper. You’ll get this caliber of paper that the most versatile in your shop.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Although low tech in theory, these tools enable you to taper edges, sew high stains and fix any imperfections in timber bits. {Begin with a typical number 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold down your wood bits as you work on them. Unfortunately, superior clamps are expensive and it usually takes the beginner woodworker a couple of years to accumulate a detailed set of timber clamps. Start with a pair of long”pipe” clamps. Today the pipe was replaced with long steel shafts, however, the structure remains the same. Get a pair of the longest clamps which you could spend. You may contact them for smaller adhesive jobs and enlarge them to their full length for larger jobs.

Shop Vice: A shop vice installed in the end of your seat is perfect for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices with their timber clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the better vices offer you rapid release mechanisms that enable the user to quickly open and close the jaws without tedious handle rotation. The timber beamed surfaces on your vice will periodically need replacement. I prefer to use soft pine in my vices which will not crush or damage lots of the various woods that I utilize. Whether I am working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be one of your most often used tools. Buy a good excellent name brand tape measure with a wide tape typically from the 25-foot selection. Although in your store you may not be using the tape at these spans, the bigger tape steps offer more rigid tapes that won’t flop around and slide off the end of boards. Assessing when you’re by yourself will be a great deal easier, and of course, quality tape steps can last for several decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the wood. Avoid oversized carpenter’s pencils. Their big flat leads are simply too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools will help you in marking the ideal angles in addition to chemical angles. Additionally, get an assortment of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover that the Robertson format works best for most woodworking jobs and is the most compatible with a drill powered bits. Last, get a set of 12-inch wood files. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and fixing little mistakes along the way.

Adhesives: Not all glues are made equal. Avoid inexpensive house brands marketed as carpenter’s glue. The cost of glue through all of your jobs is a minor cost consideration. For that reason, it is sensible to go with the very best. I have also discovered over time that I get the best results with both indoor and outdoor projects when I use quality outdoor grade adhesive. These resin-based compounds unlike traditional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Free Woodworking Tools

The peaceful satisfaction of woodworking is an excellent adventure in this day and age of hurried lives, smart phones, and time-starved careers. With a minimal investment in the most rudimentary tools and equipment, everyone can learn the profitable skills of his time-tested hobby and enjoy job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Drawknife

A drawknife (drawing knife, draw shave, shaving knife)[1] is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer (along the cutting edge) than it is deep (from cutting edge to back edge). It is pulled or "drawn" (hence the name) toward the user.

The drawknife in the illustration has a blade 23 centimetres (9.1 in) although much shorter drawknives are also made. The blade is sharpened to a chisel bevel. Traditionally, it is a rounded, smooth bevel. The handles can be below the level of the blade (as in the illustration) or at the same level.[2]

A drawknife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves.

Video: Woodworking Tools