Fun Carpentry Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable ideas and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and a few of those qualities alongside a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, she’s also an instructor and a part of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking whenever they’re following because most of the thoughts and projects Ted’s source are easy to understand and simple. Ted McGrath spent two years exploring so that he could collect enough material for an extensive package, and he ended up making a really’complete’ woodworking source.

Many might still seem unsure whether they need to be buying Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it even more difficult to make the right choice. There are actually lots of things that set Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to profit out of Ted’s woodworking Package. Those who are only getting started will find the ideas and jobs in Ted’s package quite easy. No doubt, intricate carpentry is involved; however, they will discover that it’s really easy to follow Ted’s easy step by step directions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who buy his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page source that will help beginners learn a whole lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 simple woodworking ideas and woodworking projects. Woodworkers are going to be able to locate any project of their choice within this package quite easily, though there numerous choices.

60-Day Iron Clad Money-back Guarantee

In general, this item is and those who purchase it will be endorsed by a 60-day guarantee, so when this woodworking package fails to meet them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long period to down because of its large dimensions. Nonetheless, with a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nonetheless, they didn’t mind being overrun considering how this package is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so comprehensive and vast that it contains just about every woodworking project a woodworker may be considering building.

This woodworking bundle made by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking packages that are available throughout the net. Ted has done his best to direct them in every possible way he could, through easy to understand textual instructions, clear pictures and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking projects they will find within. So, it’s certainly worth buying!

Finding Woodworking Projects and Plans for Beginners Fun Carpentry Projects

Woodworking is 1 hobby that could also be a rewarding profession if you love to work with your hands and build beautiful pieces of furniture from timber. When you learn the woodworking crafts and become a fine woodworking craftsman, you’ll have the ability to build all types of furniture, (beds, table, and chairs), effortlessly. You can then sell your completed woodworking projects and make a handsome profit. Fun Carpentry Projects.

It takes time to become proficient at the craft of woodworking. The nice thing about working up to that expert craftsman degree is you will have the ability to create some really wonderful furniture for you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit on your living space. It will be a subject of conversation whenever you have friends come over to visit. They will ask: How can you create it? Just how long did it take to finish the job? What type of wood did you use? What type of tools did you use? Just how on earth did you create such a beautiful item of furniture? As you discuss your work, a sense of pride will come over you and also do not be surprised if your friends ask you to make one for them too!

Finding Woodworking Projects and Plans for Beginners Fun Carpentry Projects

If you are thinking you are too old or too young for woodworking, think again! You are never too old or too young for such a fun hobby and it is perfect for beginners!

Where to begin in Woodworking? Fun Carpentry Projects.

Start with a concept in mind of what you would like to build and then get a really good woodworking project plan that is geared toward novices. There are numerous little woodworking projects for novices available for sale from online woodworking retailers. Obviously, you can begin with as grand a woodworking plan as you pick. On the other hand, the chances are if you start out with a small woodworking job initially, you will get a better prospect of keyword finishing the job.

Your woodworking project plan must include some lists! Length of: woodworking equipment, the amount and type of wood needed, and the required hand tools and power tools to complete the project. Note: A word of caution about buying woodworking tools. Just buy what you need to finish your immediate or upcoming endeavor. This is important especially if you are a beginner and just beginning. Tools are not cheap. The newcomer needs good woodworking tools, but it is simple to break the bank buying a lot of tools you may not utilize all that frequently. If you do buy tools, buy quality. Do a bit of research and compare goods. Buy the best that you could afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, finish punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking straps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and don’t overlook the wood glue and a brush to spread the wood glue! Of course, you’ll need a dry place to work and might need a pair of saw horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and much more woodworking power tools here, but the idea is to purchase the crucial hand and power tools that novices will need. You may always increase your arsenal as you get experience!

Fun Carpentry Projects Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should provide you step by step directions and techniques to finish your project. However, if you’re not certain about what to do there is help available! There are several areas that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Every month the authors in woodworking magazines do a story on how best to increase your woodworking craft. When it’s showing you the way you can apply a finish to a finished job, or how to create a mortise and tenon joint, something new can be learned each month. Next, is purchasing instructional DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to work with a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Fun Carpentry Projects

If you are just beginning and very interested in doing a DIY project for house then, woodworking could be interesting. If you don’t have the right information, education, and skill, you may wind up spending more time and money than you initially intended to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having mentioned, there are a few essential aspects that you should remember, before starting with any woodworking project.

1. If you’re a beginner, you must first have to be very interested in woodworking. Making something new with your own hands is a particular feeling. Don’t start a job if you’re not interested, because this might land you at a bad location.

2. Consider the main reason behind creating this woodworking project. Decide on the uses of this thing you are making.

3. Consider your abilities and analyze the time you have, until you start with a project.

4. Start projects which you can complete. If you are in the midst of some work, then it’s better to not start any project in any way.

The Benefits of Woodworking Fun Carpentry Projects

If you keep these vital points in your mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires planning as much as it takes effort. So how can you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to opt for the woodworking projects you wish to begin with. As a beginner, always select a job which has a very basic build up or a simple structure. Some simple to begin projects include, bird feeder, chairs, shelves, etc.. As soon as you find the techniques, you could always move to the next level of woodworking projects, like cupboards, sheds, along with others. Beginning projects should always keyword be less complicated and less frustrating so you have a better comprehension of working with forests and their tools. When the job is selected, start selecting your tools.

Beginners Woodworking Tools, Fun Carpentry Projects

Tools would be the ways whereby you can win the battle of woodworking. A lot of people think that power tools are requires. But for novices, basic hand tools can be quite handy and more than useful in completing a project. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for exact cuts and dimensions. The workbench, when mended with vises, offer ample space to work. As a key tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters much simple for you. When you buy a hammer, always assess the balance between the weight and endure. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are different types of saws out there in the market. Choose a size that you could deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them will help you in advance woodworking. You might even buy keyword power screwdrivers since they make the work much faster.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape helps you to quantify wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you require a wrench. However, this isn’t a tool for beginners, but having it would make work easier for you in a subsequent stage.

7. Drill – Drill makes it possible to create holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the job much simple.

8. Additional small and fundamental tools – These include pencils, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is no fixed price on woodworking projects. Based on the sort of job you would like to finish, pricing can be determined. The simple the job, the less cost it involves. But at the beginning purchasing the tools will be somewhat hefty. Therefore, it is better to resolve a budget on the resources, then keyword on the project. Purchasing the fundamental tools will ensure that you do not have to buy any more material aside from the timber ply.

Time and Instructions

Instructions are one of the primary things which every beginner should follow. It’s like the woodworking Bible. Instructions guide is quite easy to comprehend the process, what to do and the way to do it. It keyword is a systematic manual for completing the project. Time also plays a significant part in the construction of woodworking jobs. Woodworking projects require time and therefore it’s crucial for a novice to have ample quantity of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that will make the work easy. But the most essential thing keyword which will help you to achieve success is proper preparation. With proper planning and a strategy, it is likely to achieve success quickly. If you understand the purpose of woodworking, the item that you need to build, the resources you require in order to own and the typical time you can devote every day; then you’re ready to go.

Conclusion, Fun Carpentry Projects

All these strategies and instruction will make the woodworking projects and strategies for novices quickly to finish. Always ensure you have all of the essential tools, materials, space prepared. Read the instructions for building an item handy. Proper strategy and planning will allow you to make a fantastic woodworking project for your home.

|

How to Become a Master Woodworker From Your Own Home Fun Carpentry Projects

People if you’re trying to find a way to pass time or desire an alternative way to make money they generally turn into a hobby that they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based business. It’s very exciting to do and everyone can begin.

When doing woodworking at home there are a lot of jobs one can think of. When starting out you need to be very cautious when choosing which project to start out with since you will find jobs which may be too tough for a newbie. But do not worry about that because we are going to give you tips on the ideal way to start woodworking as a newcomer.

The same as any other hobby woodworking requires some working gear, so before you choose your project you have to be aware of whether you’ve got the available tools to work on that job. Try not to spend a lot of cash on buying gear when starting out, purchase more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there’ll not be any difference between the hand as well as the hands.

The Benefits of Woodworking Fun Carpentry Projects

Woodworking in your home will provide you time to explore unique jobs and find out so many things. That’s why it’s important to invest less money when starting out so you can afford to make mistakes and at some time learning about various jobs.
It’s extremely important that you know about the different kinds of wood available for creating projects. Anticipate carpenters use different kinds of wood quality for decorating pieces, learning what type of wood that they use can allow you to prepare the wood you will need for certain projects you may choose to pursue.
Once you know the basics of wood selection and the usage of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do will help you in creating good jobs to fulfill your wants.

Fun Carpentry Projects practice makes perfect so make sure that you practice your work every day if at all possible. Try out lots of layouts utilizing a variety of tools so that you may find the hang of working with the tools. When starting out you can make a number of errors but with time you will find out how to properly utilize them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Fun Carpentry Projects

Woodworking as a hobby can be one of the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimal number of tools and equipment. A little home workshop can produce a broad array of simple projects which will allow you to develop your creative and construction abilities while rewarding you with practical and artistic wood products that you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us talk about where you will perform your woodworking, based on the dimensions of your home, you might be able to create a dedicated space to your woodworking tasks. This might be a reserved place on your garage or in your basement. In some cases, a detached shed or outbuilding might be perfect to set up your very first store. A heated store detached from your house offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably create dust which travels to the living area of your house. This is very true in homes with forced air heating systems in which cold air returns found in the basement draw up dust into the upper levels of the home. Another benefit of detached workshops would be, clearly, the noise level. You can work without bothering the rest of the family. A fantastic compromise might be the garage of your home.

This can help minimize the problems of dust and noise, however depending on where you reside, a keyword garage workshop might not be practical during extremes of cold or hot weather.

The Benefits of Woodworking Fun Carpentry Projects

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to work in. Fun Carpentry Projects if you’re able to have a dedicated spot for a workshop all the better. Floor gear and bench top equipment can stay in place from project to project. If this installation is not impossible, at least attempt to make a chair area where equipment can be stored and pulled out as necessary. If possible plan for inevitable growth as you get more tools and equipment. In the beginning, establish a bench area where you are able to store and use the majority of your equipment, with a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Add a sturdy shelf beneath the seat to house your hand power tools and a pegboard over the seat to hang additional gear. Put in a woodworking at one end of your bench on the front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Fun Carpentry Projects

The reach of your startup equipment will be largely based on your budget. Whether you have got large financial resources or you are starting on a shoestring consistently buy quality gear. If you can afford it, then purchase your quality tools in your local construction and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or other regional advertisements. There are plenty of quality gently used programs out there which belong to people who stumbled on that 1 molding project around the house or received tools as presents that they won’t ever use. You can usually purchase tools for all these sellers for under half of the initial cost and save even more money should you make a package deal for all their unused equipment. Of course, acquiring tools from private people will require additional time and perhaps travel expenses. Weigh out the benefits of traveling across town to save a few added dollars on a inexpensive piece of equipment. The excess cost of travel and time in these situations is generally justified when buying large ticket items such as table saws, bandsaws or large finished tools like surface planers later on.
For smaller acquisitions, a visit to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal amount of hand gear yet generated sophisticated and complex bits. Concentrate on developing your skills with your startup set of resources and avoid lamenting about the gear you wished you had.
Here is a checklist of the useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses that also offer you some side protection for your eyes. Purchase a quality acrylic collection that will be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually impair your vision and influence safety. Avoid wearing goggles at a workshop. Most impair eyesight and dust up fast. You may avoid wearing them all together if you find them uneasy.

The next piece of critical safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking can be noisy and long-term exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a very simple ball cap with my ear muffs and eye protection. With this setup I am protecting my eyes and my ears. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Frequently known as a skill saw after the favorite brand name, this may end up being the most flexible tool in a startup workshop. In fact, at the hands of a professional, a power hand saw could be employed to construct an whole property. Eventually, you are going to want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you even start your second job. After choosing the proper saw install a quality blade. Most saws come with a starter blade of lower quality even if they are a fantastic saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will add great flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool cannot just cut curves. It is perfect for cutting holes in wood too like handle slots. At some point, you’ll want to obtain a ring saw. Bandsaws are even more flexible but a excellent floor unit can be costly. A jigsaw may be a fantastic stop gap to the novice woodworker.

Purchase an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the standard 3/8 inch version. Down the road, the 1/2 inch version will prove to be more versatile. Through hard lessons learned, I have found that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills have a tendency to have very short run times and have to be recharged often. Their battery life tends to be poor and to make matters worse keyless chucks come loose and slip frequently. This is 1 annoyance you do not need in your workshop. Purchase an assortment of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Make a habit of returning each drill piece to its potential slot at the holder after each use. Last, get a set of tough steel driver bits. Your drill may also be a flexible screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer remains as the most flexible tool in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop injuries happen. Although the most frequent, hammer injuries are often of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and features a comfortable grip. Many hammers in the high tech range offer ceramic or metal handles. Cheaper hammers usually have wood handles with poor joints between the handle and head. The head typically comes loose and the instrument becomes useless. Select a title brand quality hammer in the 16-ounce scope for overall work and a smaller finishing hammer for more complex work. Avoid using big framing hammers in the workshop and some other with dimpled head tips. These types of hammers are more suited for rough framing tasks and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can handle just about any sanding requirements you have as a novice woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and even limited amounts of surface space. As you embark on your first few projects you’ll discover that your palm sander using a bit of effort can change rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and form rough boards with 100 grit paper and after finish your work with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets using an excess source of 100 grit paper. You’ll get that this caliber of paper that the most versatile in your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in concept, these tools enable you to taper borders, flatten high spots and correct any imperfections in timber pieces. {Begin with a standard number 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and simply to hold off your wood bits as you work on them. Unfortunately, superior clamps are expensive and it normally takes the beginner woodworker a couple of years to collect a comprehensive set of wood clamps. Start with a set of long”pipe” clamps. Now the pipe was replaced with extended steel shafts, however, the structure is still the same. Receive a pair of the maximum clamps which you could spend. You can contact them for smaller glue jobs and enlarge them to their entire length for larger jobs.

Shop Vice: A shop vice installed in the end of the bench is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer quick release mechanisms that enable the consumer to quickly open and close the jaws with no dull handle rotation. The timber beamed surfaces on your vice will periodically need replacement. I would rather use soft walnut in my vices which will not crush or damage many of the different forests that I work with. Whether I’m working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be one of the most often used tools. Buy a good quality name brand tape measure with a broad tape typically in the 25-foot selection. Although in your shop you may not use the tape at these lengths, the larger tape steps offer more rigid tapes which will not flop around and slip off the ending of planks. Assessing when you are on your own will be a great deal easier, and of course, quality tape measures can endure for several decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the wood. Avoid oversize carpenter’s pencils. Their big flat leads are simply too coarse for precise measurement in the workshop.

Other Tool and Materials: Listed below are a couple other handy tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools will assist you in marking the ideal angles as well as compound angles. Additionally, get an assortment of flat, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find the Robertson format works great for most woodworking jobs and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and repairing little mistakes along the way.

Adhesives: Not all glues are created equal. Avoid cheap house brands marketed as carpenter’s glue. The expense of glue through all your projects is a little cost consideration. Therefore, it is sensible to decide on the best. I have also discovered over the years that I receive the best results with both indoor and outdoor jobs once I use quality outside grade glue. All these resin-based compounds unlike traditional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Fun Carpentry Projects

The peaceful satisfaction of woodworking is a wonderful adventure in this era of hurried lives, smartphones, and time-starved livelihood. With a minimum investment at the most rudimentary equipment and tools, anyone can learn the profitable abilities of his time-tested hobby and revel in project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Will Wright (game designer)

William Ralph Wright (born January 20, 1960) is an American video game designer and co-founder of the former game development company Maxis, and then part of Electronic Arts (EA). In April 2009, he left EA to run Stupid Fun Club Camp, an entertainment think tank in which Wright and EA are principal shareholders.[1][2][3]

The first computer game Wright designed was Raid on Bungeling Bay in 1984, but it was SimCity that brought him to prominence. The game was released by Maxis, a company Wright formed with Jeff Braun, and he built upon the game's theme of computer simulation with numerous other titles including SimEarth and SimAnt.

Wright's greatest success to date comes from being the original designer for The Sims. The game spawned multiple sequels, including The Sims 2, The Sims 3, and The Sims 4 and expansion packs, and Wright has earned many awards for his work. His latest work, Spore, was released in September 2008 and features gameplay based upon the model of evolution and scientific advancement.[4] The game sold 406,000 copies within three weeks of its release.[5]

Video: Woodworking Projects