Fun Things To Build Out Of Wood | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable thoughts and projects.

The package has various qualities that make it the”#1 woodworking Resource” and a few of those qualities alongside a few petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an educator and a part of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking whenever they are following because all the thoughts and jobs Ted’s resource are easy to understand and simple. Ted McGrath spent two years exploring so he could collect enough material for a comprehensive package, and he ended up making a truly’complete’ woodworking resource.

Many may still appear unsure whether they should be purchasing Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it more challenging to make the ideal choice. There are actually many things that place Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit out of Ted’s woodworking Package. Those that are just getting started will discover the thoughts and jobs in Ted’s bundle quite easy. Without doubt, intricate carpentry is involved; nonetheless, they will find it really simple to follow Ted’s simple step by step directions. Presently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which will help beginners learn a lot about woodworking. They will also be able to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers are going to have the ability to find any project of their choice in this bundle quite easily, though there numerous options.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and people who buy it will be endorsed by a 60-day guarantee, so if this woodworking bundle fails to meet them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long time to down due to its large dimensions. Yet, with a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overrun considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so thorough and vast it contains just about every woodworking project a woodworker may be considering building.

This woodworking package made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking packages that can be found throughout the internet. Ted has done his very best to direct them in every conceivable way he can, through easy to comprehend textual instructions, clear images and even videos too.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking jobs they will find inside. Therefore, it is certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more woodworking hand tools and much more woodworking power tools , but the concept is to buy the essential hand and power tools that novices will need. You can always increase your arsenal as you gain experience!

Fun Things To Build Out Of Wood Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to complete your project. However, if you’re unsure about what to do there is help available! There are lots of areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of those many woodworking magazines out there. Each month the authors in woodworking magazines do a story about how best to increase your woodworking craft. Whether it’s showing you the way to apply a finish to a completed project, or how to make a mortise and tenon joint, something new could be heard every month. Next, is buying instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to work with a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Starting Your First Woodworking Shop Fun Things To Build Out Of Wood

If you are a beginner and very enthusiastic about doing a DIY project for house afterward, woodworking can be interesting. If you don’t have the right information, instruction, and skill, you may wind up spending more time and money than you originally meant to spend. As a beginner woodworker, you want to have time and the appropriate tools. Having said, there are a few essential aspects you need to keep in mind, before starting with any woodworking project.

1. If you are a beginner, you should first have to be somewhat interested in woodworking. Making something new with your own hands is a special sense. Do not start a job if you are not interested, because this might land you at a terrible place.

2. Consider the main reason behind creating this woodworking project. Decide on the uses of the thing you are making.

3. Consider your abilities and examine the time that you have, until you begin with a job.

4. Start jobs that you’re able to complete. If you are in the middle of some work, then it is wise not to begin any project in any way.

The Benefits of Woodworking Fun Things To Build Out Of Wood

If you keep these essential points in mind before you begin a woodworking project, it will become very simple for you to achieve success. Woodwork requires preparation as much as it takes effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to opt for the woodworking projects that you wish to begin with. As a beginner, always pick a project which has quite a basic construct up or a very simple construction. Some easy to begin projects include, bird feeder, chairs, shelves, etc.. As soon as you get hold of these techniques, you can always proceed into the next level of woodworking projects, like cabinets, sheds, and others. Beginning jobs should always keyword be less complicated and less bothersome so you have a better comprehension of working with woods and their tools. Once the project is selected, start selecting your tools.

Beginners Woodworking Tools, Fun Things To Build Out Of Wood

Tools are the means whereby you will win the battle of woodworking. A lot of men and women believe power tools are needs. But for beginners, basic hand tools can be very handy and more than helpful in completing a job. If woodworking is the hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when fixed with vises, offer ample space to work. As a key tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make matters much easy for you. When you purchase a hammer, constantly assess the equilibrium between the weight and stand. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool helps you to cut woods at several sizes. There are various sorts of saws available on the market. Choose a size which you can handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them can help you ahead of time woodworking. You can even purchase keyword power screwdrivers since they make the job much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape gives you the capacity to measure wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you require a wrench. However, this is not a tool for novices, but using it might make work simpler for you in a later stage.

7. Drill – Drill helps you create holes in wood. Power drills are more useful but they cost more. Low wattage power drills can make the job much simple.

8. Other small and fundamental tools – These include pencils, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is no fixed price on woodworking jobs. Based on the sort of project that you would like to complete, pricing can be determined. The easy the job, the less cost it involves. But at the very beginning buying the tools will probably be somewhat hefty. Therefore, it is much better to resolve a budget first on the resources, then keyword on the undertaking. Purchasing the basic tools will ensure that you do not need to buy any more material other than the timber ply.

Time and Directions

Directions are one of the principal things which every newcomer should follow. Instructions guide is quite easy to understand the process, what to do and how to get it done. It keyword is a systematic guide for completing the job. Time also plays a significant part in the construction of woodworking jobs. Woodworking projects demand time and so it is necessary for a novice to have ample quantity of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most indispensable thing keyword that will help you to achieve success is proper planning. With proper planning and a plan, it is likely to achieve success immediately. If you know the purpose of woodworking, the thing that you want to build, the tools you require to own and the typical time it’s possible to devote daily; then you are all set to go.

Conclusion, Fun Things To Build Out Of Wood

All these strategies and education will create the woodworking projects and strategies for novices quickly to complete. Always make sure you have all of the essential tools, materials, space ready. Read the instructions for constructing an item handy. Proper strategy and preparation will allow you to earn a great woodworking job for your home.

|

The Benefits of Woodworking Fun Things To Build Out Of Wood

People when trying to find a way to pass time or desire an alternative way to generate money they usually turn into a hobby that they enjoy. Woodworking is one of the hobbies individuals turn to perform as a hobby or home based business. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of jobs one can consider. When starting out you need to be very cautious when choosing which project to start out with since there are projects which can be too tough for a newbie. But do not worry about that since we will give you guidelines on the right way to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working gear, therefore before you pick your project you have to be aware of whether you’ve got the available tools to work on that project. Try not to invest a good deal of cash on buying equipment when starting out, buy more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no difference between the artistic hand and the hands.

Finding Woodworking Projects and Plans for Beginners Fun Things To Build Out Of Wood

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking in your home will provide you time to explore unique jobs and find out a lot of things. That’s why it’s very important to invest less money when starting out so you can manage to make errors and at any time learning about various projects.
It is extremely important you know about the different types of wood available for making projects. Expect carpenters use different types of wood quality for decorating pieces, learning which type of wood that they use will help you prepare the wood you will need for certain projects you might want to pursue.
Once you understand the fundamentals of wood choice and the usage of different tools you can now implement them in cutting well wood pieces and putting wood together. Knowing what to do can help you in building good jobs to satisfy your needs.

Fun Things To Build Out Of Wood practice makes perfect so make sure you practice your work every day if possible. Try out a lot of layouts using various tools so you may find the hang of using the tools. When starting out you may earn a number of mistakes but with time you will learn how to correctly utilize them and create quality projects.

|

Starting Your First Woodworking Shop Fun Things To Build Out Of Wood

Woodworking as a hobby may be one of the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimum amount of gear and equipment. A small home workshop can produce a broad variety of simple projects which will help you develop your creative and construction abilities while rewarding you with artistic and practical wood products that you are able to enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let us talk about where you will do your woodworking, Depending on the size of your home, you may be able to produce a dedicated space to your woodworking activities. This may be a reserved spot on your garage or on your basement. Sometimes, a detached shed or outbuilding might be ideal to set up your first shop. A heated store detached from your home provides one distinct advantage: better pest management. Without complex dust control methods, basement assignments will inevitably create dust that travels into the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns located in the basement draw up dust into the upper levels of the home. Another advantage of detached workshops is, of course, the sound level. You can work without disturbing the remainder of the family. A good compromise might be the garage of your property.

This can help decrease the problems of dust and noise, however based on where you live, a keyword garage layout may not be practical during extremes of cold or hot weather.

How to Become a Master Woodworker From Your Own Home Fun Things To Build Out Of Wood

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they add more space to work in. Fun Things To Build Out Of Wood if you can have a dedicated spot for a marathon all the better. Floor tools and bench top gear can stay in position from project to project. If this setup isn’t hopeless, at least attempt to make a chair area where equipment can be stored and pulled out as needed. If at all possible plan for inevitable growth as you get more tools and equipment. At the start, establish a seat area where you can shop and use the majority of your gear, using a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. Add a sturdy shelf beneath the seat to house your hands power tools along with a pegboard over the seat to hang additional gear. Install a woodworking vice at one end of your bench on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Fun Things To Build Out Of Wood

The scope of your startup equipment will be largely based on your financial plan. Whether you’ve got large financial resources or you’re starting on a shoestring always buy quality gear. If you can afford it, then purchase your quality tools at your local construction and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or alternative regional ads. You will find an abundance of quality lightly used programs out there which belong to individuals who embarked on that 1 molding job around the home or obtained tools as gifts which they won’t ever utilize. You can usually buy tools for these sellers for under half the initial price and save even more money should you create a package deal for all their unused equipment. Of course, acquiring tools from private people will take additional time and perhaps travel expenditures. Weigh out the advantages of traveling across town to save a couple added dollars on a cheap piece of gear. The excess expense of travel and time in these scenarios is usually justified when buying large ticket items such as table saws, bandsaws or large ended tools like surface planers in the future.
For smaller acquisitions, a visit to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal amount of hand gear yet produced sophisticated and complex pieces. Concentrate on developing your skills with your start-up set of resources and avoid lamenting about the equipment you wished you’d.
Here’s a listing of the useful tools you’ll need to get started:
Safety Gear: Start as anticipated by eye protection. Get a decent pair of safety glasses which also offer you some side protection for your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually hamper your vision and influence safety. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together if you find them uncomfortable.

The next piece of crucial safety gear you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking may be noisy and long-term exposure to these noise levels can affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap with my ear muffs and eye protection. I am keeping the dust from my hair. I am good to go!

Power Hand Saw: Frequently referred to as a skill saw following the popular brand name, this can end up being the most flexible tool in a start-up workshop. In fact, in the hands of a professional, a power hand saw can be employed to build an whole property. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. These tend to cut back and will burn out before you even start your next project. After choosing the proper saw put in a quality blade. Most saws include a starter blade of lower quality even if they’re a good saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument cannot only cut curves. It’s ideal for cutting holes in timber too like handle slots. Eventually, you’re going to want to get a ring saw. Bandsaws are even more flexible but a quality floor unit can be expensive. A jigsaw can be a fantastic stop gap for the novice woodworker.

Buy an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck over the conventional 3/8 inch version. Through hard lessons learned, I have found that buying quality, in this case, is more critical than ever. Cheaper drills have a tendency to get very short run times and have to be recharged frequently. Their long-term battery life tends to be poor and to make matters worse keyless chucks come loose and slip often. This is 1 annoyance you don’t need on your workshop. Buy an assortment of superior carbide tipped drill bits that are stored in a holder labeling each drill bit size. Make a habit of returning each drill bit to its prospective slot at the holder after every use. Lastly, get a pair of hard steel driver bits. Your drill can also be a versatile screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer stays as the most versatile tool in the shop, and often the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop accidents happen. Although the most frequent, hammer injuries are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and features a comfortable grip. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The head usually comes loose and the tool becomes useless. Pick a name brand quality hammer at the 16-ounce range for overall work and also a smaller completing hammer for more intricate work. Avoid using big framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more suited to rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can handle pretty much any trimming requirements that you’ve got as a novice woodworker. As your woodworking skills evolve, you will probably update to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander can clean up borders, cross cuts and even limited amounts of surface area. As you embark on the first few projects you might discover that your palm sander with a bit of effort can transform rough looking creations into virtual works of art! You can use your palm sander to sand and shape rough planks using 100 grit paper and after finish your job with 200 or even 300 grit paper. Buy an range of sandpaper sheets with an extra supply of 100 grit paper. You’ll get this grade of paper that the most versatile in your store.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Though low tech in theory, these tools enable you to taper borders, sew high stains and correct any imperfections in timber pieces. {Start with a typical number 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and simply to hold off your wood pieces as you work on them. Unfortunately, superior clamps are costly and it usually takes the novice woodworker a couple of years to collect a comprehensive set of wood clamps. Start with a pair of extended”pipe” clamps. Today the pipe has been replaced with extended steel shafts, but the structure is still the same. Receive a set of the maximum clamps that you can afford. You can contact them for smaller adhesive jobs and expand them to their entire length for bigger projects.

Shop Vice: A shop vice installed at the end of the seat is perfect for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enable the consumer to rapidly open and close the jaws with no tedious handle turning. The wood beamed surfaces on your vice will occasionally need replacement. I prefer to utilize soft walnut in my vices that will not crush or damage lots of the various woods that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be among your most often used tools. Purchase a fantastic quality name brand tape measure with a wide tape usually from the 25-foot range. Even though in your shop you may not use the tape in these spans, the larger tape steps offer more rigid tapes which will not flop around and slide off the end of boards. Assessing when you are by yourself will be a lot simpler, and naturally, quality tape steps can endure for several decades.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will require additional sanding. Avoid oversize carpenter’s pencils. Their large flat leads are simply too rough for accurate measurement in the workshop.

Other Tool and Materials: Here are a few other useful tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools will assist you in marking the right angles as well as compound angles. Get the number two and three Robertson set. I find that the Robertson format works great for most woodworking jobs and will be the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and fixing little mistakes on the way.

Adhesives: Not many glues are created equal. Stay away from cheap home brands marketed as carpenter’s glue. The cost of glue through all your projects is a little cost consideration. For that reason, it makes sense to go with the best. I have also discovered over time that I get the best results with both indoor and outdoor jobs once I use quality outdoor grade glue. All these resin-based compounds unlike conventional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, Fun Things To Build Out Of Wood

The peaceful satisfaction of woodworking is an excellent adventure in this era of rushed lives, smartphones, and time-starved livelihood. With a minimum investment at the most rudimentary equipment and tools, anyone can learn the rewarding abilities of his time-tested hobby and enjoy job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Kerry Wood

Kerry Lee Wood (born June 16, 1977) is an American former baseball pitcher who played 14 seasons in Major League Baseball (MLB) for the Chicago Cubs, Cleveland Indians, and New York Yankees. Wood first came to prominence as a 20-year-old rookie when he recorded 20 strikeouts in a one-hit shutout against the Houston Astros, which some have argued may be the greatest single-game pitching performance in MLB history.[1][2][3] The game also made Wood the co-holder of the MLB record for strikeouts in a single game (20), and earned Wood the nickname Kid K. He was later named the 1998 National League Rookie of the Year. Wood would go on to record over 200 strikeouts in four out of his first five seasons, with a high of 266 in 2003, and holds several MLB strikeout records.

Though he struggled with injuries throughout his career, Wood was twice named an All-Star.[4] Wood transitioned to a relief pitcher in 2007 due to continued struggles with injuries, ultimately reviving his career as a closer. During his career Wood was placed on the disabled list 14 times in 14 major league seasons, which included missing the entire 1999 season due to Tommy John surgery. After a slow start to the 2012 season, Wood retired on May 18, 2012.[5]

Wood attended MacArthur High School in Irving, Texas, for his first three seasons of high school baseball. He continued his education at Grand Prairie High School for his final season as a high school player.[6] Wood was high school teammates with Kevin Walker.[7] He initially committed to play college baseball at McLennan Community College in Waco.[8]

Video: Woodworking Tools