Fun Woodworking Ideas | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those qualities alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, himself is also an instructor and a part of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking when they are following because all the thoughts and jobs Ted’s source are simple to comprehend and easy. Ted McGrath spent two years researching so that he could collect enough material for an extensive bundle, and he ended up creating a truly’complete’ woodworking source.

Many may still seem unsure whether they need to be purchasing Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it more challenging to make the right option. There are actually lots of things that place Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit from Ted’s woodworking Package. People who are just getting started will discover the ideas and jobs in Ted’s package quite easy. No doubt, complicated carpentry is demanded; nonetheless, they will discover that it’s really easy to follow Ted’s simple step by step instructions. Presently, both beginner and seasoned ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who purchase his package, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource that helps beginners learn a whole lot about woodworking. They’ll also be able to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers will be able to locate any project of their choice in this bundle quite readily, even though there numerous options.

60-Day Iron Clad Money-back Guarantee

In general, this product is and those who buy it will be endorsed by a 60-day guarantee, so if this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long time to down because of its large dimensions. Yet, with a high-speed internet connection it should download within a few minutes.

Slightly Overwhelming

As there are several ideas, plans and projects in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overrun considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design package is so thorough and vast that it contains just about every woodworking project a woodworker may be interested in building.

This woodworking bundle made by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking bundles that can be found across the internet. Ted has done his very best to guide them in every possible way he can, through easy to comprehend textual instructions, clear images and even videos too.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking projects they will find within. So, it’s definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more innovative hand tools and more woodworking power tools , but the concept is to buy the essential hand and power tools that beginners will need. You may always increase your toolbox as you get experience!

Fun Woodworking Ideas Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to finish your project. But if you are unsure about what to do there is help available! There are several places that starting woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines available. Each month the authors in woodworking publications do a story on how to improve your woodworking craft. Whether it’s showing you the way you can apply an end to a completed project, or how to create a mortise and tenon joint, something new can be heard each month. Next, is purchasing instructional DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to work with a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Starting Your First Woodworking Shop Fun Woodworking Ideas

If you are just beginning and very interested in doing a DIY project for house afterward, woodworking can be interesting. If you don’t have the right information, education, and skill, you may land up spending more money and time than you initially intended to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a couple of essential aspects you should keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you should first need to be very interested in woodworking. Creating something new with your own hands is a particular sense. Don’t begin a job if you’re not interested, as this may land you in a bad location.

2. Consider the primary reason behind making this woodworking project. Decide on the uses of this thing you are making.

3. Consider your abilities and examine the time that you have, before you begin with a job.

4. Start projects which you’re able to finish. If you are in the midst of some work, then it is wise not to start any project in any way.

Starting Your First Woodworking Shop Fun Woodworking Ideas

If you keep these essential things in your mind before you begin a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires planning as much as it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to opt for the woodworking projects that you wish to begin with. As a newcomer, always pick a job which has quite a basic construct up or a very simple construction. A few easy to start projects comprise, bird feeder, chairs, shelves, etc.. The moment you find these techniques, you could always move into the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning jobs should always keyword be less complicated and less bothersome so you have a better comprehension of working with forests and their resources. When the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Fun Woodworking Ideas

Tools are the means whereby you will win the struggle of woodworking. A lot of people believe power tools are requires. But for beginners, basic hand tools can be quite handy and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is needed for exact cuts and dimensions. The workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer can make things much simple for you. When you buy a hammer, constantly assess the balance between the weight and stand. Always pick a hardy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool helps you to cut forests at several sizes. There are different types of saws available in the market. Choose a size which you could handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian types and standard flat type. Having all of them will help you ahead of time woodworking. You can even purchase keyword energy screwdrivers since they make the job much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you require a wrench. Nonetheless, this is not a tool for beginners, but having it would make work simpler for you at a later stage.

7. Drill – Drill helps you make holes in wood. Low wattage power drills will make the task much simple.

8. Additional small and basic tools – These include pens, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is no fixed cost on woodworking jobs. Based on the sort of project that you would like to complete, pricing could be determined. The simple the job, the less cost it involves. But at the beginning buying the tools will be somewhat hefty. Because of this, it is much better to resolve a budget on the resources, then keyword on the undertaking. Buying the basic tools will ensure that you don’t have to purchase any more material other than the wood ply.

Time and Directions

Instructions are among the principal things which every beginner should follow. It is like the woodworking Bible. Instructions guide is very easy to understand the process, what to do and how to get it done. Time also plays a significant part in the building of woodworking projects. Woodworking projects require time and therefore it is crucial for a beginner to have ample quantity of time weekly.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. Nevertheless, the most indispensable thing keyword that will help you to reach success is proper preparation. With appropriate planning and a strategy, it is likely to achieve success immediately. If you know the purpose of woodworking, then the item you want to build, the resources you require to possess and the typical time it’s possible to devote daily; then you are ready to go.

Conclusion, Fun Woodworking Ideas

These strategies and education will make the woodworking projects and plans for beginners quickly to complete. Always ensure you have all the essential tools, materials, area prepared. Keep the instructions for building a product handy. Appropriate strategy and planning can help you to earn a great woodworking project for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Fun Woodworking Ideas

People if you’re trying to find a way to pass time or want an alternate way to make money they generally turn to a hobby they enjoy. Woodworking is one of those hobbies individuals turn to perform as a hobby or home based company. It’s very exciting to do and everyone can begin.

When doing woodworking in your home there are lots of projects one can consider. When starting out you need to be very careful when choosing which job to begin with since there are projects which may be too tough for a newbie. But don’t worry about that since we are going to provide you tips on the ideal means to begin woodworking as a beginner.

Just like any other hobby woodworking requires some working equipment, so before you choose your project you have to be aware of if you have the available resources to work on such a job. Try not to spend a lot of money on purchasing gear when starting out, buy more gear as you get more experience and become an expert carpenter. Should you enjoy your hobby then there’ll not be any difference between the artistic hand and the hands.

Starting Your First Woodworking Shop Fun Woodworking Ideas

Woodworking at home will provide you time to explore different jobs and learn a lot of things. That is why it’s very important to invest less money when starting out so you can afford to make errors and at some time learning about different projects.
It is extremely important you know about the different types of wood available for making jobs. Anticipate carpenters utilize different types of wood quality for decorating pieces, learning what type of wood they use can allow you to prepare the wood you’ll need for certain projects you might choose to pursue.
As soon as you know the basics of wood choice and the use of different tools you can now employ them in cutting well wood pieces and putting wood together. Knowing what to do will assist you in creating good projects to fulfill your needs.

Fun Woodworking Ideas practice makes perfect so make sure you practice your work every day if possible. Try out a lot of designs using a variety of tools so that you can get the hang of using the tools. When starting out you may make a number of errors but with time you will learn how to correctly utilize them and create quality projects.

|

The Benefits of Woodworking Fun Woodworking Ideas

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You may get started on a shoestring with a minimal amount of tools and equipment. A small home workshop may generate a wide variety of simple projects that will allow you to develop your creative and construction abilities while rewarding you with practical and artistic wood products that you are able to appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let us talk about where you will perform your woodworking, Depending on the size of your home, you may be able to create a dedicated space into your woodworking tasks. This might be a reserved place on your garage or on your cellar. In some cases, a detached shed or outbuilding may be perfect to prepare your very first store. A heated shop detached from your house offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably create dust which travels to the living area of your home. This is particularly true in homes with forced air heating systems in which cold air returns found in the basement draw dust up into the top levels of the house. Another benefit of detached workshops is, of course, the sound level. It’s possible to work without bothering the remainder of the household. A good compromise could be the garage of your home.

This might help decrease the difficulties of dust and noise, however based on where you live, a keyword garage workshop might not be practical during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Fun Woodworking Ideas

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes they include more space to function in. Fun Woodworking Ideas if you’re able to have a dedicated place for a marathon all the greater. Floor tools and bench top equipment can stay in position from project to project. If this setup is not impossible, at least try to create a bench area where equipment can be saved and pulled out as necessary. If possible plan for inevitable growth as you get more tools and gear. At the start, set up a seat area where you can store and use the majority of your gear, using a temporary expansion of your activities onto the garage or basement floor.

A basic workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. Add a sturdy shelf beneath the seat to home your hands power tools along with a pegboard above the seat to hang additional gear. Put in a woodworking vice at one end of the bench on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Fun Woodworking Ideas

The reach of your startup equipment will be largely based on your financial plan. Whether you have got big financial resources or you’re starting on a shoestring consistently buy quality equipment. If you can afford it, buy your quality tools at your local construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative local ads. There are plenty of quality lightly used tools out there which belong to people who stumbled on that one molding project around the home or obtained tools as gifts which they won’t ever utilize. You can usually purchase tools for all these sellers for under half the original cost and save even more money should you create a package deal for all their unused equipment. Obviously, getting tools from private people will require additional time and possibly travel expenditures. Weigh out the benefits of traveling across town to save a couple extra bucks on a cheap piece of equipment. The excess cost of time and travel in these situations is usually justified when buying large ticket items such as table saws, bandsaws or high ended tools such as surface planers in the future.
For smaller acquisitions, a trip to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal amount of hand equipment yet generated sophisticated and complex bits. Concentrate on developing your skills with your startup set of resources and avoid lamenting about the equipment you wished you had.
Here’s a listing of the useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Purchase a quality acrylic collection that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually impair your vision and influence security. Avoid wearing goggles in a workshop. Most impair vision and dust up fast. You can avoid wearing all of them together in the event that you find them uneasy.

The next piece of crucial safety equipment that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking may be noisy and long-term exposure to these noise levels may affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most workers tire quicker when subjected to high sound levels. Select effective hearing protection which you find comfortable and effective. These can contain earplugs or complete ear keyword muff protectors. I find a quality set of ear muff protectors is perfect for hearing protection.

Lastly, wear a cap to keep the dust from your hair. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently known as a skill saw after the popular brand name, this can end up being the most versatile tool in a startup workshop. In reality, in the hands of an expert, a power hand saw can be used to build an entire property. As mentioned before get a quality manufacturer saw. Avoid cheap unknown brands. These are inclined to cut back and will burn out before you start your next project. After selecting the proper saw put in an excellent blade. Most saws include a starter blade of lesser quality even if they are a good saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument cannot only cut corners. It’s ideal for cutting holes in wood also like handle slots. At some point, you’re going to want to get a ring saw. Bandsaws are much more versatile but a excellent floor unit can be costly. A jigsaw can be a good stop gap to the novice woodworker.

Buy an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss within the conventional 3/8 inch version. Through hard lessons learned, I have discovered that buying quality, in this scenario, is much more critical than ever. Cheaper drills tend to get very short run times and need to be recharged often. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slip often. This is 1 annoyance you do not need on your workshop. Purchase an range of quality carbide tipped drill bits which are kept in a holder labeling each drill bit size. Create a habit of returning every drill bit to its potential slot in the holder after each use. Lastly, get a pair of tough steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer remains as the most flexible instrument in the store, and often the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries happen. Although the most frequent, hammer injuries are usually of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with poor joints between the handle and head. The mind typically comes loose and the instrument becomes useless. Pick a title brand quality hammer in the 16-ounce scope for overall work and a smaller completing hammer for more complex work. Avoid using large framing hammers in the workshop and any with dimpled mind tips. These kinds of hammers are more suited to rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can manage just about any sanding requirements you have as a beginner woodworker. As your woodworking skills evolve, you’ll likely upgrade to a floor model disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you’ll discover your palm sander with just a little bit of effort can change rough looking creations into virtual works of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and later finish your work with 200 or 300 grit paper. Purchase an range of sandpaper sheets using an excess source of 100 grit paper. You’ll get this caliber of paper the most versatile in your shop.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Though low tech in theory, these tools enable you to taper borders, sew high stains and correct any imperfections in wood pieces. {Start with a typical amount 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold off your wood pieces as you work on them. Unfortunately, superior clamps are costly and it normally takes the novice woodworker a couple of years to accumulate a detailed set of wood clamps. Begin with a pair of long”pipe” clamps. Now the pipe has been replaced with extended steel shafts, however, the structure is still the same. Get a set of the longest clamps which you can spend. You can contact them for smaller glue jobs and expand them to their full length for bigger jobs.

Shop Vice: A shop vice installed at the end of the seat is ideal for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices using their timber clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the greater vices offer rapid release mechanisms that enabled the user to rapidly open and close the limbs without dull handle turning. The wood clamping surfaces on your vice will periodically need replacement. I prefer to use soft walnut in my vices which will not crush or damage lots of the various forests that I work with. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be one of the most frequently used tools. Purchase a fantastic excellent name brand tape measure with a broad tape typically from the 25-foot range. Even though in your shop you may not be using the tape in these lengths, the larger tape steps offer more rigid tapes that will not flop around and slide off the ending of planks. Measuring when you’re on your own will be a great deal simpler, and naturally, quality tape measures can endure for several years.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the wood. Avoid oversize carpenter’s pencils. Their large flat leads are just too coarse for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools can assist you in marking the ideal angles in addition to compound angles. Additionally, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find the Robertson format works best for most woodworking projects and will be the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and fixing small mistakes along the way.

Adhesives: Not many glues are made equal. Avoid inexpensive home brands marketed as carpenter’s glue. The expense of adhesive through all of your jobs is a little cost consideration. For that reason, it is sensible to go with the best. I have also found over the years that I get the best results with both indoor and outdoor projects once I use quality outdoor grade glue. These resin-based compounds unlike conventional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Fun Woodworking Ideas

The peaceful satisfaction of woodworking is an excellent experience in this era of hurried lives, smart phones, and time-starved livelihood. With a minimal investment at the most basic tools and equipment, anyone can learn the rewarding abilities of his time-tested avocation and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

List of Encyclopædia Britannica Films titles

See also Encyclopædia Britannica Films and the animated cartoon television series Britannica's Tales Around the World..mw-parser-output .tocnumber{display:none}.mw-parser-output #toc ul,.mw-parser-output .toc ul{line-height:1.5em;list-style:none none;margin:.3em 0 0;padding:0}.mw-parser-output .hlist #toc ul ul,.mw-parser-output .hlist .toc ul ul{margin:0}.mw-parser-output .horizontal-toc{}.mw-parser-output .horizontal-toc-align-left{float:right}.mw-parser-output .horizontal-toc-align-left{float:left}.mw-parser-output .horizontal-toc-align-center{margin-left:auto;margin-right:auto;clear:none}.mw-parser-output .horizontal-toc-clear-right{clear:right}.mw-parser-output .horizontal-toc-clear-left{clear:left}.mw-parser-output .horizontal-toc-clear-both{clear:both}.mw-parser-output .horizontal-toc-clear-none{clear:none}

Video: Woodworking Projects