Furniture Payment Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable ideas and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and some of those qualities alongside a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an instructor and a member of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they are following because most of the ideas and jobs Ted’s source are simple to understand and easy. Ted McGrath spent two years exploring so he could collect enough material for an extensive bundle, and he ended up creating a really’complete’ woodworking resource.

Many might still seem unsure whether they need to be buying Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it even more difficult to make the ideal choice. There are in fact many things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to profit out of Ted’s woodworking Package. People that are only getting started will discover the ideas and projects in Ted’s bundle quite simple. No doubt, complicated carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s easy step-by-step directions. Currently, both novice and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who buy his package, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that will help beginners learn a whole lot about woodworking. They will also have the ability to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers are going to have the ability to find any job of their choice within this package quite easily, though there numerous options.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who buy it will be backed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large dimensions. Nonetheless, using a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

As there are several ideas, plans and projects at Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nevertheless, they did not mind being overwhelmed considering the fact that this package is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking package is so thorough and vast that it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking bundle made by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking bundles that are available across the internet. Ted has done his very best to guide them in every conceivable way he could, through simple to comprehend textual instructions, clear images and even videos too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking projects they will find inside. So, it’s definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more woodworking hand tools and more woodworking power tools here, but the concept is to purchase the crucial hand and power tools that beginners will need. You may always increase your arsenal as you gain experience!

Furniture Payment Plans Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you’ve purchased your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to finish your project. But if you are not certain about what to do there is help available! There are several areas that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of the several woodworking magazines available. Each month the writers in woodworking publications do a story on the best way best to improve your woodworking craft. Whether it’s showing you the way you can apply a finish to a completed job, or how to make a mortise and tenon joint, something new can be learned each month. Next, is buying educational DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to use a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Furniture Payment Plans

If you are just beginning and very interested in doing a DIY job for home then, woodworking could be interesting. If you don’t have the right information, instruction, and skill, you might wind up spending more money and time than you originally meant to spend. As a novice woodworker, you need to have space, time and the correct tools. Having mentioned, there are a couple of essential factors you need to keep in mind, before beginning with any woodworking project.

1. If you are just beginning, you should first have to be somewhat interested in woodworking. Making something new with your own hands is a particular sense. Don’t begin a job if you are not interested, as this may land you at a bad location.

2. Consider the primary reason for making this woodworking project. Decide on the uses of the thing you’re making.

3. Consider your skills and analyze the time that you have, before you start with a job.

4. Start jobs that you’re able to complete. If you are in the midst of a work, then it’s wise to not start any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Furniture Payment Plans

If you keep those essential points in mind before you begin a woodworking project, it will become very simple for you to reach success. Woodwork requires preparation as much as it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to choose the woodworking jobs that you wish to begin with. As a newcomer, always select a project that has quite a basic build up or a simple construction. A few easy to start projects comprise, bird feeder, benches, shelves, etc.. As soon as you find these techniques, you could always proceed into the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning jobs should keyword be less complicated and less frustrating so you have a better comprehension of working with forests and their resources. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Furniture Payment Plans

Tools are the ways through which you can win the battle of woodworking. A lot of people believe power tools are requires. However, for novices, basic hand tools can be quite handy and more than helpful in completing a project. If woodworking is your hobby, then a few tools that you would demand are:

1. Workbench – A workbench is required for precise cuts and measurements. Even the workbench, when mended with vises, provide ample space to work. As a primary tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer can make matters considerably simple for you. When you purchase a hammer, constantly assess the balance between the weight and stand. Always select a sturdy, yet lightweight item.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool helps you to cut forests at several sizes. There are different types of saws available in the market. Decide on a size that you could handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Possessing all of them will help you in advance woodworking. You might also buy keyword energy screwdrivers as they make the work much quicker.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape helps you to measure wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you require a wrench. However, this isn’t a tool for novices, but having it might make work easier for you at a later stage.

7. Drill – Drill makes it possible to create holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the task much easy.

8. Other small and basic tools – These include pencils, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s not any fixed price on woodworking jobs. Dependent on the type of job that you want to complete, pricing can be set. The simple the job, the less cost it involves. But at the very beginning purchasing the tools will be somewhat hefty. Because of this, it’s better to resolve a budget on the resources, then keyword on the undertaking. Purchasing the basic tools will make certain you don’t need to buy any more material aside from the wood ply.

Time and Instructions

Directions are among the primary things that each and every newcomer should follow. Instructions manual is very simple to comprehend the procedure, what to do and how to do it. It keyword is a systematic manual for completing the job. Time also has a significant role in the building of woodworking projects. Woodworking projects demand time and so it’s crucial for a beginner to have ample amount of time every week.

Tips and Tricks for Beginners

There are no quick tips or tricks that will make the work easy. But the most indispensable thing keyword which will help you to reach success is proper planning. With proper planning and a plan, it is possible to achieve success quickly. If you know the objective of woodworking, the item that you want to build, the resources you require to possess and the average time you can devote every day; then you are ready to go.

Conclusion, Furniture Payment Plans

These strategies and education will make the woodworking projects and strategies for novices fast to finish. Always ensure that you have all the vital tools, materials, area prepared. Read the instructions for constructing a product handy. Appropriate strategy and planning will allow you to make a fantastic woodworking job for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Furniture Payment Plans

Folks if you’re trying to find a way to pass time or want an alternate way to generate money they generally turn to a hobby they enjoy. It is very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of projects one can think of. When starting out you need to be very careful when choosing which job to start out with since you will find jobs which can be too tough for a beginner. But do not be concerned about that since we will provide you guidelines on the right way to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working gear, therefore before you choose your project you have to be aware of if you have the available tools to work on that job. Try not to invest a good deal of cash on purchasing gear when starting out, buy more equipment as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there will be no difference between the hand and the normal hands.

Woodwork Crafts – The Beginners Guide To Woodworking Furniture Payment Plans

Woodworking at home will give you time to explore unique jobs and learn a lot of things. That is why it’s very important to invest less money when starting out so you can manage to make errors and at any time learning about various projects.
It is extremely important that you know about the different kinds of wood available for making projects. Expect carpenters use several types of wood quality for decorating pieces, learning what type of wood that they use can allow you to prepare the wood you will need for specific jobs you may choose to pursue.
As soon as you understand the basics of wood selection and the use of different tools you can now employ them in cutting out well wood pieces and putting wood together. Knowing what to do can help you in building good jobs to fulfill your needs.

Furniture Payment Plans practice makes perfect so be sure you practice your work every day if at all possible. Try out lots of layouts using a variety of tools so that you can find the hang of using the tools. When starting out you may make a range of errors but with time you will learn how to properly utilize them and create quality projects.

|

Starting Your First Woodworking Shop Furniture Payment Plans

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever enjoy. You can get started on a shoestring with a minimum number of tools and equipment. A small home workshop can generate a broad array of simple projects that will help you develop your creative and building abilities while rewarding you with artistic and practical wood products that you can enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let’s talk about where you will do your woodworking, based on the dimensions of your house, you may have the ability to produce a dedicated space into your woodworking activities. This may be a reserved spot on your garage or on your basement. In some cases, a detached shed or outbuilding might be perfect to prepare your very first shop. A heated shop detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control methods, basement assignments will inevitably create dust that travels into the living area of your house. This is particularly true in homes with forced air heating systems in which cold air yields located in the cellar draw dust up into the top levels of the house. Another benefit of detached workshops is, of course, the noise level. It’s possible to work without bothering the remainder of the family. A good compromise might be the garage of your property.

This might help decrease the difficulties of dust and sound, however depending on where you live, a keyword garage layout may not be practical during extremes of hot or cold weather.

The Benefits of Woodworking Furniture Payment Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes they include more space to work in. Furniture Payment Plans if you’re able to have a dedicated place for a workshop all the greater. Floor gear and bench top equipment can remain in position from project to project. If this setup is not impossible, at least try to make a chair area where equipment can be stored and pulled out as necessary. If possible plan for inevitable expansion as you get more tools and gear. At the beginning, establish a seat area where you are able to shop and use the majority of your equipment, with a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. Insert a sturdy shelf below the bench to home your hands power tools and a pegboard over the bench to hang other gear. Install a woodworking vice at one end of the bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Furniture Payment Plans

The scope of your start-up equipment will be mostly based on your budget. Whether you’ve got big financial resources or you are starting on a shoestring consistently purchase quality equipment. If you can afford it, purchase your quality tools in the regional building and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or other regional ads. You will find plenty of quality gently used programs out there that belong to individuals who embarked on that one molding project around the house or obtained tools as gifts which they won’t ever use. You can usually buy tools for all these sellers for under half of the initial price and save even more money should you create a bundle deal for all their unused equipment. Of course, getting tools from private individuals will take extra time and possibly travel expenditures. Weigh the advantages of traveling around town to save a few extra dollars on a inexpensive piece of gear. The excess cost of time and travel in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a visit to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum amount of hand gear yet generated sophisticated and intricate pieces. Concentrate on developing your skills with your startup set of resources and avoid lamenting about the gear you wished you had.
Here’s a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as expected by eye protection. Get a nice pair of safety glasses that also offer some side protection to your eyes. Buy a quality acrylic collection that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually impair your vision and affect safety. Avoid wearing goggles at a workshop. Most impair vision and dust up quickly. You may avoid wearing them all together if you find them uncomfortable.

The next bit of crucial safety gear you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking can be long-term and noisy exposure to these noise levels can affect hearing and lead to tinnitus and other hearing losses. I am keeping the dust from my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw following the popular brand name, this can prove to be the most flexible instrument in a start-up workshop. In reality, in the hands of a professional, a power hand saw could be employed to construct an whole house. As mentioned before get an excellent manufacturer saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you start your next project. After selecting the proper saw install a quality blade. Most saws include a starter blade of lesser quality even if they are a fantastic saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add great versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t only cut corners. It’s ideal for cutting holes in wood too like handle slots. Eventually, you’ll want to get a ring saw. Bandsaws are even more flexible but a excellent floor unit could be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Purchase an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss within the conventional 3/8 inch version. Down the street, the 1/2 inch version will end up being more versatile. Through hard lessons learned, I have discovered that buying quality, in this scenario, is much more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged often. Their long-term battery life tends to be poor and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you do not need in your workshop. Buy an range of quality carbide tipped drill bits that are kept in a holder labeling each drill bit size. Make a habit of returning every drill bit to its prospective slot in the holder after each use. Lastly, get a set of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop injuries occur. Even though the most ordinary, hammer injuries are usually of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable handle. Most hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers generally have wood grips with inferior joints between the handle and head. The mind typically comes loose and the tool becomes useless. Select a name brand quality hammer at the 16-ounce scope for general work and a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and any with dimpled mind tips. These types of hammers are more suited for rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can handle pretty much any trimming requirements that you’ve got as a beginner woodworker. As your woodworking abilities evolve, you will likely upgrade to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and even limited quantities of surface space. As you embark on the first few projects you might find your palm sander with just a bit of effort can change rough looking creations into virtual works of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and after finish your job with 200 or even 300 grit paper. Buy an range of sandpaper sheets using an excess source of 100 grit paper. You’ll find that this caliber of paper that the most versatile in your shop.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in concept, these tools enable you to taper edges, sew high stains and correct any imperfections in timber bits. {Begin with a typical amount 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold off your wood pieces as you operate on them. Unfortunately, superior clamps are expensive and it normally requires the novice woodworker a couple of years to accumulate a detailed set of wood clamps. Begin with a pair of long”pipe” clamps. Today the pipe was replaced with long steel shafts, but the structure is still the same. Get a pair of the longest clamps that you could spend. You can get in touch with them for smaller glue jobs and enlarge them to their full length for larger jobs.

Shop Vice: A shop vice installed at the end of your bench is perfect for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and avoid metal functioning vices with steel jaws. Woodworking vices with their wood clamping surfaces may securely hold wood bits without marring or damaging them. A number of the better vices offer quick release mechanisms that enable the consumer to quickly open and close the jaws without tedious handle turning. The wood beamed surfaces on your vice will occasionally need replacement. I prefer to use soft walnut in my vices that won’t crush or damage lots of the various woods that I work with. Whether I’m working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of the most frequently used tools. Purchase a fantastic quality name brand tape measure with a broad tape typically in the 25-foot selection. Even though in your store you may not use the tape in these lengths, the larger tape measures offer more rigid tapes that won’t flop around and slip off the end of boards. Assessing when you’re on your own will be a great deal simpler, and naturally, quality tape measures can last for several decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber. Avoid oversize carpenter’s pencils. Their big flat leads are just too rough for accurate measurement in the workshop.

Other Tool and Materials: Here are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools can help you in marking the right angles in addition to chemical angles. Also, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover the Robertson format works best for many woodworking jobs and is the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood documents. The expense of glue through all your projects is a little cost consideration. Therefore, it is sensible to go with the best. I have also found over the years that I receive the best results with both indoor and outdoor projects when I use quality outdoor grade glue. These resin-based compounds unlike traditional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Furniture Payment Plans

The peaceful satisfaction of woodworking is an excellent adventure in this day and age of hurried lives, smartphones, and time-starved livelihood. With a minimal investment at the most rudimentary equipment and tools, everyone can learn the profitable skills of his time-tested avocation and enjoy project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Street furniture

Street furniture is a collective term (used in the United Kingdom,[1] Australia[2] and Canada[3][4]) for objects and pieces of equipment installed along streets and roads for various purposes. It includes benches, traffic barriers, bollards, post boxes, phone boxes, streetlamps, traffic lights, traffic signs, bus stops, tram stops, taxi stands, public lavatories, fountains, watering troughs, memorials, public sculptures, and waste receptacles. The design and placement of furniture takes into account aesthetics, visual identity, function, pedestrian mobility and road safety.

Benches are usually found in central parts of settlements, such as plazas and parks. They are often provided by the local councils or contributors to serve as a place to rest and admire views. Armrests in between are sometimes provided to discourage lying down and/or unwanted closeness.

Phone boxes or telephone booths are prominent in most cities. While they range drastically in the amount of cover they offer users (e.g. many only cover the phone itself while others provide full booths) they are typically easy to spot. The widespread use of mobile phones has resulted in a decrease in their numbers.

Video: Woodworking Tools