Furniture Plans Coffee Table | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and a few of those attributes along with a few petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, himself is also an instructor and a part of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking when they’re following because all the thoughts and jobs Ted’s resource are simple to comprehend and easy. Ted McGrath spent two years researching so he could collect enough material for an extensive bundle, and he ended up making a truly’complete’ woodworking source.

Many might still seem unsure if they should be buying Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it more difficult to make the right option. There are actually lots of things that set Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit out of Ted’s woodworking Package. People who are only getting started will find the thoughts and jobs in Ted’s package quite simple. No doubt, intricate carpentry is involved; however, they will discover that it’s really easy to follow Ted’s easy step by step instructions. Currently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who purchase his package, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a lot about woodworking. They will also have the ability to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers are going to be able to find any job of their choice within this package quite readily, though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and people who purchase it’ll be endorsed by a 60-day guarantee, so if this woodworking bundle fails to satisfy them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large dimensions. Yet, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans in Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering how this package is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design package is so comprehensive and vast that it contains just about every woodworking project a woodworker may be considering building.

This woodworking package made by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking bundles that can be found throughout the net. Ted has done his best to direct them in every conceivable way he could, through easy to understand textual directions, clear pictures and even videos as well.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking projects they will find within. Therefore, it’s definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and more woodworking power tools here, but the concept is to purchase the essential hand and power tools which beginners will need. You can always add to your toolbox as you get experience!

Furniture Plans Coffee Table Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to finish your project. But if you are not certain about what to do there is help available! There are several areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Every month the writers in woodworking magazines do a story about how best to improve your woodworking craft. When it is showing you how you can apply a finish to a completed job, or how to make a mortise and tenon joint, something new can be heard each month. Next, is buying instructional DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to work with a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Furniture Plans Coffee Table

If you’re a beginner and very interested in doing a DIY project for home afterward, woodworking can be fun. If you don’t have the proper information, education, and ability, you might wind up spending more time and money than you originally intended to spend. As a beginner woodworker, you want to have time and the appropriate tools. Having said, there are a few essential factors that you need to remember, before starting with any woodworking project.

1. If you’re just beginning, you should first need to be very interested in woodworking. Creating something new with your own hands is a particular sense. Do not begin a project if you are not interested, because this might land you in a bad location.

2. Consider the primary reason behind making this woodworking project. Decide on the uses of this item you’re making.

3. Consider your abilities and examine the time you have, until you begin with a project.

4. Start jobs which you can finish. If you’re in the midst of a work, then it is wise to not begin any project at all.

Finding Woodworking Projects and Plans for Beginners Furniture Plans Coffee Table

If you keep those essential points in your mind before beginning a woodworking project, it is going to become very easy for you to reach success. Woodwork requires planning as much because it requires effort. So how can you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to choose the woodworking projects that you want to begin with. As a newcomer, always pick a project that has a very basic build up or a very simple construction. Some simple to start projects include, bird feeder, chairs, shelves, etc.. As soon as you find these techniques, you could always proceed to the next level of woodworking jobs, such as cupboards, sheds, and others. Beginning jobs should keyword be complicated and less bothersome so you have a better knowledge of working with forests and their resources. Once the job is selected, start selecting your tools.

Beginners Woodworking Tools, Furniture Plans Coffee Table

Tools would be the ways whereby you will win the battle of woodworking. A lot of men and women believe power tools are requires. However, for beginners, basic hand tools can be quite handy and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for precise cuts and measurements. Even the workbench, when fixed with vises, offer ample space to work. As a key tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer can make matters much easy for you. When you buy a hammer, constantly assess the balance between the weight and endure. Always pick a hardy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are various sorts of saws available in the market. Choose a size that you can deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Possessing all of them will help you in advance woodworking. You might even buy keyword energy screwdrivers as they make the job much faster.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you require a wrench. Nonetheless, this isn’t a tool for beginners, but having it might make work easier for you at a subsequent stage.

7. Drill – Drill makes it possible to make holes in wood. Low wattage power drills can make the task much simple.

8. Additional small and fundamental tools – These include pencils, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s not any fixed cost on woodworking jobs. Based on the type of project you want to complete, pricing could be determined. The simple the project, the less cost it involves. However, at the very beginning buying the tools will probably be a little hefty. Because of this, it is much better to resolve a budget on the resources, then keyword on the project. Purchasing the basic tools will ensure that you do not need to purchase any more material aside from the timber ply.

Time and Directions

Directions are among the primary things which each and every newcomer should follow. Instructions manual is quite simple to comprehend the process, what to do and the way to do it. Time also plays an important role in the construction of woodworking projects. Woodworking projects require time and therefore it is crucial for a beginner to have ample amount of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most indispensable thing keyword that can help you to reach success is proper planning. With proper planning and a plan, it is likely to achieve success quickly. If you know the objective of woodworking, the item that you want to build, the tools you need in order to own and the typical time it’s possible to devote daily; then you are all set to go.

Conclusion, Furniture Plans Coffee Table

These strategies and instruction will make the woodworking projects and plans for novices fast to finish. Always make sure you have all of the essential tools, materials, space prepared. Keep the instructions for building a product handy. Proper strategy and planning can allow you to make a fantastic woodworking job for your property.

|

The Benefits of Woodworking Furniture Plans Coffee Table

Folks when trying to find a way to pass time or want an alternate way to make money they generally turn into a hobby they enjoy. Woodworking is one of the hobbies people turn to perform as a hobby or home based company. It’s very exciting to do and everyone can get started.

When doing woodworking at home there are lots of projects one can think of. When starting out you need to be very cautious when choosing which project to start out with since there are projects that can be too tough for a beginner. But don’t be concerned about that because we are going to give you guidelines on the ideal way to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, so before you choose your job you have to know if you have the available resources to work on such a job. Try not to invest a lot of money on buying gear when starting out, purchase more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there’ll not be any difference between the artistic hand and the hands.

Finding Woodworking Projects and Plans for Beginners Furniture Plans Coffee Table

Woodworking at home will give you time to research unique jobs and learn so many things. That is why it’s very important to spend less money when starting out so that you can afford to make errors and at some time learning about different projects.
It is extremely important that you know about the different kinds of wood available for making jobs. Anticipate carpenters use different types of wood quality for decorating pieces, learning what type of wood that they use can allow you to prepare the wood you’ll need for specific projects you might want to pursue.
As soon as you know the basics of wood selection and the usage of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do will help you in creating good projects to satisfy your needs.

Furniture Plans Coffee Table practice makes perfect so make sure you practice your work every day if at all possible. Try out a lot of designs using various tools so you may find the hang of working with the tools. When starting out you may earn a number of mistakes but with time you will learn how to correctly utilize them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Furniture Plans Coffee Table

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimal number of tools and equipment. A small home workshop may produce a broad array of simple projects which can allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products that you are able to enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let us talk about where you’ll perform your woodworking, based on the size of your house, you may have the ability to create a dedicated space into your woodworking tasks. This might be a reserved place on your garage or on your basement. Sometimes, a detached shed or outbuilding might be ideal to prepare your first store. A heated store detached from your house provides one distinct advantage: better dust control. Without sophisticated dust control systems, basement workshops will inevitably create dust which travels to the living area of your house. This is very true in homes with forced air heating systems where cold air yields found in the cellar draw dust up into the top levels of the house. Another benefit of detached workshops would be, of course, the sound level. It’s possible to work without bothering the rest of the family. A good compromise might be the garage of your property.

This can help minimize the problems of dust and sound, however based on where you live, a keyword garage layout may not be sensible during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Furniture Plans Coffee Table

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes that they add more space to function in. Furniture Plans Coffee Table if you can have a dedicated place for a marathon all the greater. Floor gear and bench top equipment can stay in place from project to project. If this setup is not impossible, at least attempt to make a chair area where equipment could be stored and pulled out as needed. If at all possible plan for inevitable expansion as you get more tools and equipment. In the beginning, set up a bench area where you are able to shop and use the majority of your gear, using a temporary expansion of your activities onto the basement or garage floor.

A basic workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. That will enable you to work comfortably while standing. Add a sturdy shelf beneath the bench to home your hands power tools and a pegboard above the seat to hang other gear. Put in a woodworking vice at one end of the seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Furniture Plans Coffee Table

The scope of your startup equipment will be largely based on your financial plan. Whether you have got big financial resources or you’re starting on a shoestring always purchase quality gear. If you can afford it, buy your quality tools in your local building and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or other local ads. There are an abundance of quality lightly used programs out there that belong to people who embarked on that 1 molding job around the home or obtained tools as presents which they will never use. You can usually buy tools for all these sellers for less than half the initial cost and save even more money if you make a package deal for all their unused equipment. Obviously, acquiring tools from private individuals will require extra time and possibly travel expenses. Weigh the benefits of traveling around town to save a couple extra bucks on a cheap piece of gear. The extra cost of time and travel in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or high ended tools such as surface planers in the future.
For smaller acquisitions, a visit to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimum amount of hand gear yet generated sophisticated and intricate bits. Concentrate on developing your abilities with your startup set of tools and prevent lamenting about the gear you wished you had.
Here is a checklist of the useful tools You Will Need to get started:
Safety Gear: Start as expected with eye protection. Get a nice pair of safety glasses that also offer you some side protection for your eyes. Buy a quality acrylic set that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and affect security. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You may avoid wearing them all together if you find them uncomfortable.

The next piece of crucial safety equipment you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to these sound levels may affect hearing and result in tinnitus and other hearing losses. With this set up I’m shielding my eyes and my ears. I am keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw following the popular brand name, this may end up being the most flexible instrument in a start-up workshop. In fact, in the hands of a professional, a power hand saw can be employed to build an whole house. As mentioned before get an excellent brand saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you start your second project. After selecting the proper saw put in an excellent blade. Most saws come with a starter blade of lesser quality even if they’re a good saw. Keep this blade as a copy and put in an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add great versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool cannot only cut corners. It is perfect for cutting holes in timber also like manage slots. At some point, you’re going to want to obtain a band saw. Bandsaws are even more flexible but a quality floor unit could be costly. A jigsaw can be a good stop gap for the novice woodworker.

Buy an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the standard 3/8 inch model. Through hard lessons learned, I have discovered that purchasing quality, in this case, is much more crucial than ever. Cheaper drills have a tendency to have very short run times and need to be recharged often. Their battery life tends to be poor and to make matters worse keyless chucks come loose and slide often. This is one annoyance you do not want on your workshop. Purchase an assortment of quality carbide tipped drill bits which are kept in a holder labeling each drill bit size. Create a habit of returning every drill piece to its potential slot at the holder after every use. Last, get a pair of tough steel driver bits. Your drill can also be a versatile screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer remains as the most versatile instrument in the store, and often the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries occur. Even though the most frequent, hammer accidents are often of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The good hammer is balanced, does not rust and comes with a comfortable grip. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The mind usually comes loose and the instrument becomes useless. Select a name brand quality hammer at the 16-ounce scope for general work and a smaller completing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled mind tips. These types of hammers are more appropriate for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can manage just about any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor model disc and belt sander. However, for the time being, the ever-versatile palm sander may clean up edges, cross cuts and even limited quantities of surface space. As you embark on your first few projects you might discover your palm sander with just a little bit of effort can change rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and form rough planks using 100 grit paper and after finish your job with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets with an extra supply of 100 grit paper. You’ll get this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in theory, these tools enable you to taper edges, sew high stains and correct any imperfections in timber pieces. {Start with a standard amount 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and simply to hold down your wood pieces as you work on them. Unfortunately, superior clamps are expensive and it usually takes the beginner woodworker a few years to accumulate a detailed set of timber clamps. Start with a set of long”pipe” clamps. Now the pipe has been replaced with long steel shafts, but the structure is still the same. Receive a set of the longest clamps which you could afford. You may contact them for smaller glue jobs and enlarge them to their entire length for larger jobs.

Shop Vice: A shop vice installed in the end of the bench is ideal for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the greater vices offer you rapid release mechanisms that enabled the user to quickly open and close the limbs without tedious handle rotation. The wood beamed surfaces in your vice will periodically need replacement. I prefer to use soft pine in my vices which won’t crush or damage lots of the various forests that I work with. Whether I’m working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be among your most frequently used tools. Buy a fantastic excellent name brand tape measure with a broad tape usually from the 25-foot range. Even though in your store you may not use the tape in these lengths, the bigger tape steps provide more rigid tapes which will not flop around and slip off the ending of planks. Assessing when you’re on your own will be a lot simpler, and naturally, quality tape steps can last for several years.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will require extra sanding. Avoid oversize carpenter’s pencils. Their big flat leads are simply too coarse for accurate measurement in the workshop.

Other Tool and Materials: Here are a few other handy tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools will help you in marking the right angles in addition to compound angles. Get the number two and three Robertson set. I find the Robertson format works great for most woodworking jobs and is the most compatible with a drill powered bits. Last, get a set of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and fixing little mistakes along the way.

Adhesives: Not many glues are made equal. Stay away from inexpensive house brands sold as carpenter’s glue. The expense of glue through all your projects is a minor cost consideration. For that reason, it is sensible to go with the very best. I have also discovered over the years that I get the best results with both indoor and outdoor projects once I use quality outside grade glue. These resin-based compounds unlike conventional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Furniture Plans Coffee Table

The peaceful gratification of woodworking is a wonderful adventure in this era of hurried lives, smartphones, and time-starved careers. With a minimum investment at the most rudimentary equipment and tools, everyone can learn the profitable abilities of his time-tested hobby and revel in project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

List of furniture types

This is a list of furniture types. Furniture includes objects such as tables, chairs, beds, desks, backpacks, dressers, cupboards . These objects are usually kept in a house or other building to make it suitable or comfortable for living or working in.