Furniture Plans To | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and some of those qualities along with a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking whenever they’re after because most of the ideas and jobs Ted’s resource are easy to understand and easy. Ted McGrath spent two years researching so he could gather enough material for an extensive bundle, and he ended up making a really’complete’ woodworking source.

Many may still appear unsure if they need to be purchasing Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it even more difficult to make the right option. There are actually lots of things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit from Ted’s woodworking Package. Those that are only getting started will find the ideas and jobs in Ted’s package quite simple. Without doubt, complicated carpentry is demanded; however, they will discover that it’s really easy to follow Ted’s simple step by step instructions. Presently, both beginner and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s resource is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who purchase his package, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource that will help beginners learn a whole lot about woodworking. They’ll also be able to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers are going to have the ability to locate any project of their choice in this package quite readily, though there numerous choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and people who buy it will be backed by a 60-day warranty, so if this woodworking package fails to meet them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long time to down because of its large size. Nonetheless, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

As there are several ideas, plans and projects in Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nonetheless, they did not mind being overwhelmed considering the fact that this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast it contains just about every woodworking project a woodworker may be interested in constructing.

This woodworking bundle created by Ted McGrath is really unmatchable and cannot be compared to those other woodworking bundles that are available across the net. Ted has done his very best to direct them in every possible way he could, through easy to understand textual directions, clear pictures and even movies as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking jobs they will find within. Therefore, it is definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more woodworking hand tools and more woodworking power tools here, but the concept is to buy the essential hand and power tools that novices will need. You can always add to your toolbox as you get experience!

Furniture Plans To Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to complete your project. However, if you are not certain about what to do there is help available! There are lots of places that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of the many woodworking magazines available. Each month the authors in woodworking magazines do a story on how best to increase your woodworking craft. Whether it’s showing you how to apply an end to a completed job, or how to make a mortise and tenon joint, something new could be heard every month. Next, is purchasing instructional DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to work with a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Furniture Plans To

If you’re a beginner and very enthusiastic about doing a DIY project for home then, woodworking can be interesting. If you don’t have the proper information, instruction, and skill, you may land up spending more money and time than you originally meant to spend. As a novice woodworker, you want to have space, time and the correct tools. Having mentioned, there are a few essential factors you should keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you must first need to be very interested in woodworking. Making something new with your hands is a special sense. Don’t begin a project if you’re not interested, because this might land you at a bad place.

2. Consider the main reason for creating this woodworking project. Decide on the uses of the item you’re making.

3. Consider your abilities and analyze the time you have, until you start with a job.

4. Start projects which you’re able to complete. If you are in the midst of some work, then it is wise to not begin any project at all.

The Benefits of Woodworking Furniture Plans To

If you maintain these essential things in mind before you begin a woodworking project, it is going to become very easy for you to reach success. Woodwork requires planning as much because it takes effort. So how do you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to choose the woodworking jobs you want to begin with. As a newcomer, always select a job that has quite a basic construct up or a very simple structure. Some simple to start projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find the techniques, you could always proceed to the next level of woodworking jobs, such as cupboards, sheds, along with others. Beginning projects should keyword be complicated and less bothersome so that you have a better knowledge of working with woods and their resources. Once the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Furniture Plans To

Tools are the means through which you can win the battle of woodworking. Many people think that power tools are needs. But for beginners, basic hand tools can be very convenient and more than useful in completing a project. If woodworking is your hobby, then some tools that you would require would be:

1. Workbench – A workbench is needed for exact cuts and measurements. The workbench, when fixed with vises, provide ample space to operate. As a primary tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer will make matters much easy for you. When you purchase a hammer, always check the equilibrium between the weight and endure. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool helps you to cut woods at different sizes. There are various sorts of saws available in the marketplace. Choose a size that you could handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them can help you in advance woodworking. You can even buy keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape helps you to quantify wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you demand a wrench. Nonetheless, this isn’t a tool for beginners, but having it might make work simpler for you at a later stage.

7. Drill – Drill makes it possible to make holes in wood. Low wattage power drills can make the job much simple.

8. Other small and fundamental tools – These include pens, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s not any fixed price on woodworking projects. Based on the sort of job you want to complete, pricing could be determined. The simple the job, the less cost it involves. But at the very beginning buying the tools will be a little hefty. Therefore, it’s better to fix a budget first on the tools, then keyword on the undertaking. Purchasing the basic tools will make certain you don’t need to purchase any more material other than the wood ply.

Time and Directions

Instructions are among the principal things which each and every beginner should follow. It is like the woodworking Bible. Instructions manual is very simple to understand the process, what to do and how to do it. It keyword is a systematic guide for finishing the project. Time also has an important part in the construction of woodworking jobs. Woodworking projects demand time and therefore it is crucial for a beginner to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. But the most indispensable thing keyword which can allow you to achieve success is proper preparation. With proper planning and a plan, it is likely to achieve success immediately. If you understand the objective of woodworking, then the thing you want to build, the tools you require to own and the average time you can devote daily; then you’re all set to go.

Conclusion, Furniture Plans To

These tips and education is likely to create the woodworking projects and plans for novices quickly to finish. Always ensure you have all of the vital tools, materials, space prepared. Keep the instructions for constructing an item handy. Proper strategy and planning can allow you to make a fantastic woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners Furniture Plans To

People when trying to find a way to pass time or want an alternate method to make money they generally turn into a hobby they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are lots of jobs one can consider. When starting out you need to be very cautious when choosing which project to start out with because there are jobs that can be too difficult for a beginner. But don’t worry about that since we are going to give you tips on the ideal way to start woodworking as a newcomer.

The same as any other hobby woodworking demands some working equipment, so before you pick your job you need to know whether you’ve got the available tools to work on that job. Try not to spend a good deal of money on buying equipment when starting out, purchase more equipment as you gain more experience and become an expert carpenter. If you enjoy your hobby then there’ll not be any gap between the artistic hand and the hands.

Starting Your First Woodworking Shop Furniture Plans To

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking in your home will give you time to research unique jobs and learn a lot of things. That’s why it’s important to spend less money when starting out so you can afford to make mistakes and at some time learning about different projects.
It is extremely important that you know more about different kinds of wood available for creating jobs. Expect carpenters utilize several types of wood quality for decorating bits, learning which kind of wood they use will help you prepare the wood you’ll need for specific projects you might want to pursue.
Once you understand the basics of wood selection and the use of different tools now you can employ them in cutting out well wood pieces and putting wood together. Knowing what to do can help you in creating good projects to satisfy your wants.

Furniture Plans To practice makes perfect so make sure that you practice your work every day if possible. Try out lots of designs utilizing various tools so you can find the hang of working with the tools. When starting out you can earn a range of errors but with time you will learn how to properly utilize them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Furniture Plans To

Woodworking as a hobby can be among the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimal number of tools and equipment. A little home workshop may produce a wide variety of simple projects which can help you develop your creative and building skills while rewarding you with artistic and practical wood products which you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let us discuss where you’ll do your woodworking, Depending on the size of your house, you may be able to produce a dedicated space into your woodworking tasks. This might be a reserved place in your garage or in your cellar. In some cases, a detached shed or outbuilding might be perfect to prepare your very first store. A heated store detached from your home offers one distinct advantage: better pest management. Without complex dust control methods, basement workshops will inevitably create dust that travels into the living area of your house. This is particularly true in homes with forced air heating systems where cold air returns located in the cellar draw dust up into the upper levels of the home. Another benefit of detached workshops would be, clearly, the noise level. You can work without disturbing the rest of the household. A fantastic compromise might be the garage of your home.

This might help minimize the difficulties of dust and noise, however depending on where you reside, a keyword garage workshop may not be sensible during extremes of cold or hot weather.

Starting Your First Woodworking Shop Furniture Plans To

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes that they include more space to work in. Furniture Plans To if you’re able to have a dedicated spot for a workshop all the better. Floor tools and bench top equipment can stay in position from project to project. If this setup isn’t hopeless, at least try to make a chair area where equipment can be stored and pulled out as necessary. If possible plan for inevitable expansion as you acquire more tools and equipment. In the start, set up a seat area where you can shop and use the majority of your gear, using a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. That will enable you to work comfortably while standing. Add a sturdy shelf beneath the bench to house your hands power tools and a pegboard over the bench to hang additional equipment. Install a woodworking at one end of the seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Furniture Plans To

The reach of your start-up equipment will be largely based on your budget. Whether you have got big financial resources or you are starting on a shoestring always buy quality gear. If you can afford it, then buy your quality tools at your local construction and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or alternative local advertisements. There are an abundance of quality gently used tools out there that belong to people who stumbled on that one molding project around the house or received tools as presents that they won’t ever use. You can usually buy tools for all these sellers for less than half of the original price and save even more money if you make a bundle deal for all their unused equipment. Obviously, getting tools from private people will require extra time and possibly travel expenses. Weigh the advantages of traveling across town to save a couple added bucks on a inexpensive piece of equipment. The extra expense of time and travel in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or high ended tools like surface planers later on.
For smaller acquisitions, a visit to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimum quantity of hand gear yet generated sophisticated and intricate pieces. Focus on developing your skills with your startup set of tools and avoid lamenting about the equipment you wished you’d.
Here is a checklist of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected by eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Purchase a quality oil set that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will eventually impair your vision and affect security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up fast. You can avoid wearing them all together in the event that you find them uncomfortable.

The next bit of critical safety gear you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking may be noisy and long-term exposure to these noise levels may affect hearing and result in tinnitus and other hearing losses. With this setup I’m shielding my eyes and my ears. I’m keeping the dust out of my hair. I am good to go!

Power Hand Saw: Frequently referred to as a skill saw after the popular brand name, this can prove to be the most versatile instrument in a startup workshop. In fact, in the hands of a professional, a power hand saw could be used to build an whole house. At some point, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a budget enables him to do cross cuts, tear cuts and even elaborate angle cuts. As mentioned earlier get an excellent manufacturer saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you start your next job. After selecting the right saw install an excellent blade. Most saws come with a starter blade of lesser quality even if they are a good saw. Keep this blade as a backup and put in an excellent blade with carbide teeth. Start with a hybrid blade. All these possess a balanced tooth count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument cannot just cut curves. It’s ideal for cutting holes in wood too like handle slots. Eventually, you’re going to want to obtain a band saw. Bandsaws are much more flexible but a excellent floor unit could be costly. A jigsaw may be a fantastic stop gap for the novice woodworker.

Buy an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck within the standard 3/8 inch version. Through hard lessons learned, I have found that purchasing quality, in this scenario, is much more crucial than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their battery life will be poor and to make things worse keyless chucks come loose and slide frequently. This is one annoyance you don’t need in your workshop. Buy an assortment of superior carbide tipped drill bits that are stored in a holder tagging each drill bit size. Make a habit of returning every drill bit to its prospective slot at the holder after each use. Last, get a set of tough steel driver bits. Your drill can also be a flexible screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer remains as the most flexible instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop injuries occur. Although the most ordinary, hammer accidents are often of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and comes with a comfortable handle. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood grips with poor joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Select a name brand quality hammer in the 16-ounce scope for overall work and a smaller finishing hammer for more complex work. Avoid using big framing hammers at the workshop and any with dimpled mind tips. These kinds of hammers are more suited to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can manage pretty much any trimming requirements that you have as a beginner woodworker. As your woodworking abilities evolve, you will likely upgrade to a floor model disc and belt sander. However, for now, the ever-versatile palm sander can clean up borders, cross cuts and even limited amounts of surface space. As you embark on the first few projects you might discover your palm sander using a little bit of effort can change rough looking creations into virtual works of art! You can use your palm sander to sand and form rough planks using 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets using an excess supply of 100 grit paper. You’ll find that this caliber of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Although low tech in concept, these tools enable you to taper edges, sew high stains and correct any imperfections in timber bits. {Begin with a typical number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold off your wood bits as you operate on them. Unfortunately, superior clamps are costly and it normally requires the beginner woodworker a few years to collect a detailed set of timber clamps. Start with a set of extended”pipe” clamps. Today the pipe was replaced with extended steel shafts, but the structure remains the same. Get a pair of the longest clamps which you can spend. You can get in touch with them for smaller adhesive jobs and expand them to their entire length for bigger projects.

Shop Vice: A store vice installed in the end of your bench is ideal for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. A number of the better vices offer quick release mechanisms that enabled the user to quickly open and close the jaws with no dull handle rotation. The wood clamping surfaces in your vice will periodically require replacement. I prefer to use soft pine in my vices which won’t crush or damage lots of the different forests that I utilize. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of the most often used tools. Buy a fantastic excellent name brand tape measure with a wide tape typically from the 25-foot range. Even though in your store you might not be using the tape at these lengths, the bigger tape steps offer more rigid tapes which won’t flop around and slide off the end of boards. Measuring when you are by yourself will be a great deal easier, and of course, quality tape steps can last for several decades.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the timber. Avoid oversize carpenter’s pencils. Their big flat leads are simply too coarse for accurate measurement in the workshop.

Other Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools can assist you in marking the right angles as well as chemical angles. Additionally, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I discover the Robertson format works best for many woodworking jobs and will be the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and fixing small mistakes along the way.

Adhesives: Not all glues are made equal. Avoid cheap home brands marketed as carpenter’s glue. The expense of adhesive through all your jobs is a minor cost consideration. Therefore, it makes sense to go with the very best. I also have found over time that I get the best results with both indoor and outdoor jobs once I use quality outdoor grade adhesive. All these resin-based compounds unlike traditional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Furniture Plans To

The peaceful satisfaction of woodworking is a wonderful adventure in this day and age of hurried lives, smartphones, and time-starved careers. With a minimal investment in the most rudimentary tools and equipment, anyone can learn the rewarding abilities of his time-tested hobby and enjoy project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Nebraska Furniture Mart

Nebraska Furniture Mart is the largest home furnishing store in North America selling furniture, flooring, appliances and electronics. NFM was founded in 1937 by Belarus-born Rose Blumkin, universally known as Mrs. B., in Omaha, Nebraska, United States. Under the motto "sell cheap and tell the truth,"[1] she worked in the business until age 103. In 1983, Mrs. B. sold a majority interest to Berkshire Hathaway in a handshake deal with Warren Buffett.[1][2]

Nebraska Furniture Mart was founded in 1937 by Rose Blumkin (born December 3, 1893-1998), universally known as "Mrs. B.", in Omaha, Nebraska. Blumkin, borrowed the initial $500 investment from her brother,[1] while her husband Isadore continued to run their second hand clothing store.[2] At one point early on, the Blumkins had to sell their own home furnishings to pay off a debt. Mrs. B set the Mart apart by selling products cheaper than the other furniture store around. The bigger competitors were able to successfully get the furniture suppliers to stop selling to the Mart because of the prices. Rather than give up and raise prices, Mrs. B went to other suppliers around the country while still underselling her competitors.[2]

In 1983, at age 89, Mrs. B sold 80%[3] of Nebraska Furniture Mart to Warren Buffett in a one-page handshake deal.[2][1] Buffett bought the company without auditing her inventory or books, instead basing the deal on his own shopping experience at the Mart and his respect for the Blumkin family.[4] Mrs. B sold the business due to her belief that if she sold before her death, her children wouldn't fight over the company. She continued to work at the store, putting in her normal 70 hour work week, using an electric scooter to get around.[2] Soon after the sale, Buffett would say, “Put her up against the top graduates of the top business schools or chief executives of the Fortune 500 and, assuming an even start with the same resources, she’d run rings around them.”[4]

Video: Woodworking Projects