Furniture Project Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable thoughts and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes along with a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, she’s also an instructor and a part of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking whenever they’re following because all the ideas and jobs Ted’s resource are easy to understand and simple. Ted McGrath spent two years exploring so that he could collect enough material for an extensive bundle, and he ended up creating a really’complete’ woodworking resource.

Many might still appear unsure whether they need to be purchasing Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it more challenging to make the right choice. There are in fact lots of things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit from Ted’s woodworking Package. Those that are just getting started will find the thoughts and jobs in Ted’s package quite easy. Without doubt, complicated carpentry is involved; however, they will find it really simple to follow Ted’s easy step by step instructions. Presently, both beginner and seasoned ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who purchase his package, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a lot about woodworking. They will also be able to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will have the ability to find any project of their choice in this package quite easily, though there so many options.

60-Day Iron Clad Money-back Guarantee

In general, this item is and people who buy it’ll be backed by a 60-day warranty, so when this woodworking bundle fails to meet them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large dimensions. Yet, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overrun considering how this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so comprehensive and vast it contains just about every woodworking project a woodworker may be considering constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that can be found throughout the net. Ted has done his very best to direct them in every conceivable way he could, through simple to comprehend textual directions, clear images and even movies as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking jobs they will find within. So, it is definitely worth buying!

Starting Your First Woodworking Shop Furniture Project Plans

Woodworking is one hobby that can also be a rewarding profession if you like to work together with your hands and build exquisite pieces of furniture from timber. When you learn that the woodworking crafts and become a fine woodworking craftsman, you will be able to construct all kinds of furniture, (table, beds, and chairs), effortlessly. After that you can sell your finished woodworking jobs and make a handsome profit. Furniture Project Plans.

It takes time to become proficient at the craft of woodworking. The nice thing about working up to this expert craftsman level is you’ll have the ability to build some really wonderful furniture for you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit on your living space. It will be a subject of conversation when you have friends come over to see. They’ll ask: How can you make it? Just how long did it take to complete the job? What type of wood did you use? What kind of tools did you use? How on earth did you create such a gorgeous piece of furniture? As you speak about your job, a feeling of pride will come over you and do not be surprised if your friends ask you to make one for them too!

Starting Your First Woodworking Shop Furniture Project Plans

If you’re thinking you are just too old or too young for woodworking, think again! You’re never too old or too young for such an enjoyable hobby and it’s ideal for beginners!

Where to Begin in Woodworking? Furniture Project Plans.

Start with an idea in your mind of what you want to build then get a excellent woodworking project plan that’s geared toward beginners. There are numerous small woodworking projects for beginners available for sale from online woodworking retailers. Of course, you can begin with as grand a woodworking plan as you pick. However, the odds are if you begin with a small woodworking job initially, you will have a better prospect of keyword completing the project.

Your woodworking project plan must include some lists! Length of: woodworking hardware, the quantity and type of wood needed, and the essential hand tools and power tools to finish the project. Note: A word of warning about buying woodworking tools. Only buy what you want to finish your instant or upcoming endeavor. This is important especially if you are a beginner and just beginning. Tools are not cheap. The newcomer needs good woodworking gear, but it is simple to break the bank buying a lot of tools you might not use all that frequently. When you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you could afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, finish punches, flat and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and do not forget that the wood glue and a brush to spread the wood adhesive! Of course, you will require a dry area to work and might need a set of saw horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and much more woodworking power tools here, but the idea is to buy the crucial hand and power tools which beginners will need. You can always increase your arsenal as you get experience!

Furniture Project Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you have bought your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to finish your project. However, if you’re not certain about what to do there is help available! There are several places that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the many woodworking magazines available. Every month the writers in woodworking magazines do a story about how best to improve your woodworking craft. When it’s showing you how you can apply a finish to a completed job, or how to create a mortise and tenon joint, something new can be learned every month. Next, is buying educational DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to work with a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Furniture Project Plans

If you’re a beginner and very interested in doing a DIY job for house afterward, woodworking could be fun. If you do not have the proper information, instruction, and skill, you might land up spending more money and time than you originally meant to spend. As a beginner woodworker, you want to have time and the appropriate tools. Having said, there are a couple of essential factors you need to remember, before starting with any woodworking project.

1. If you are a beginner, you must first have to be very interested in woodworking. Creating something new with your hands is a special feeling. Don’t start a project if you’re not interested, because this might land you in a bad place.

2. Think of the primary reason for making this woodworking project. Choose the uses of this thing you are making.

3. Consider your skills and examine the time that you have, before you begin with a project.

4. Start jobs that you can finish. If you’re in the middle of a work, then it’s wise not to begin any project at all.

The Benefits of Woodworking Furniture Project Plans

If you keep those essential points in your mind before you begin a woodworking project, it will become very easy for you to achieve success. Woodwork requires planning as much as it takes effort. So how can you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to opt for the woodworking projects you want to start with. As a newcomer, always pick a job which has quite a basic construct up or a very simple structure. Some simple to start projects include, bird feeder, chairs, shelves, etc.. As soon as you get hold of the techniques, you could always proceed into the next level of woodworking projects, like cabinets, sheds, and others. Beginning jobs should always keyword be complicated and less frustrating so you have a better comprehension of working with woods and their resources. When the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Furniture Project Plans

Tools would be the means whereby you will win the struggle of woodworking. Many people think that power tools are needs. However, for novices, basic hand tools can be very handy and more than useful in completing a job. If woodworking is your hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is needed for precise cuts and measurements. Even the workbench, when mended with vises, provide ample space to operate. As a key tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things considerably simple for you. When you buy a hammer, constantly check the equilibrium between the weight and endure. Always select a hardy, yet lightweight item.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws out there on the marketplace. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian types and standard flat type. Having all of them can help you in advance woodworking. You might even purchase keyword power screwdrivers as they make the job much quicker.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape gives you the capacity to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you require a wrench. However, this is not a tool for novices, but having it would make work simpler for you in a later stage.

7. Drill – Drill helps you make holes in wood. Low wattage power drills can make the task much easy.

8. Additional small and basic tools – These include pencils, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is no fixed cost on woodworking jobs. Dependent on the sort of job that you want to finish, pricing can be set. The easy the project, the less cost it involves. But at the beginning buying the tools will be somewhat hefty. Therefore, it is much better to resolve a budget first on the resources, then keyword on the project. Purchasing the basic tools will make certain you don’t need to purchase any more material aside from the timber ply.

Time and Instructions

Directions are among the principal things which every newcomer should follow. Instructions manual is very simple to understand the procedure, what to do and how to get it done. It keyword is a systematic manual for finishing the project. Time also has a significant role in the construction of woodworking projects. Woodworking projects demand time and so it’s necessary for a novice to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that will make the work easy. But the most essential thing keyword which can help you to achieve success is proper preparation. With appropriate planning and a plan, it’s likely to achieve success quickly. If you know the purpose of woodworking, then the item that you want to build, the tools you need to possess and the typical time it’s possible to give every day; then you are ready to go.

Conclusion, Furniture Project Plans

All these strategies and education will create the woodworking projects and plans for novices fast to complete. Always ensure that you have all of the essential tools, materials, area ready. Keep the instructions for building an item handy. Appropriate strategy and planning can allow you to earn a great woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners Furniture Project Plans

People when looking for a way to pass time or want an alternative way to generate money they generally turn to a hobby they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based business. It’s very exciting to do and everyone can get started.

When doing woodworking at home there are a lot of jobs one can think of. When starting out you need to be quite careful when choosing which project to start out with since there are jobs which can be too difficult for a newbie. But don’t worry about that since we will provide you tips on the ideal way to start woodworking as a newcomer.

Just like any other hobby woodworking requires some working gear, therefore before you pick your project you have to be aware of if you’ve got the available tools to work on that project. Try not to invest a lot of cash on buying equipment when starting out, purchase more equipment as you get more experience and become an expert carpenter. If you enjoy your hobby then there’ll not be any difference between the hand and the hands.

The Benefits of Woodworking Furniture Project Plans

Woodworking in your home will provide you time to research different projects and find out so many things. That’s why it’s very important to invest less money when starting out so you can afford to make mistakes and at some time learning about different jobs.
It’s very important you know about different types of wood available for creating projects. Anticipate carpenters use different types of wood quality for decorating pieces, learning what kind of wood that they use can allow you to prepare the wood you will need for certain projects you may want to pursue.
As soon as you understand the fundamentals of wood choice and the use of different tools now you can employ them in cutting out well wood pieces and putting wood together. Knowing what to do can assist you in creating good projects to satisfy your needs.

Furniture Project Plans practice makes perfect so make sure that you practice your work every day if at all possible. Try out lots of designs using a variety of tools so you may get the hang of using the tools. When starting out you can make a range of mistakes but with time you will learn how to properly use them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Furniture Project Plans

Woodworking as a hobby may be among the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimum number of tools and equipment. A little home workshop can produce a broad array of simple projects that will help you develop your creative and construction skills while rewarding you with artistic and practical wood products that you are able to enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let us talk about where you’ll do your woodworking, Depending on the size of your house, you might be able to create a dedicated space into your woodworking activities. This might be a reserved spot on your garage or in your basement. Sometimes, a detached shed or outbuilding might be ideal to prepare your very first shop. A heated shop detached from your house offers one distinct advantage: better pest management. Without complex dust control methods, basement workshops will inevitably create dust that travels to the living area of your house. This is particularly true in homes with forced air heating systems where cold air yields found in the basement draw up dust into the top levels of the house. Another advantage of detached workshops would be, of course, the noise level. You can work without disturbing the remainder of the family. A fantastic compromise might be the garage of your home.

This can help minimize the difficulties of dust and noise, however depending on where you reside, a keyword garage layout might not be practical during extremes of cold or hot weather.

Starting Your First Woodworking Shop Furniture Project Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes they include more space to function in. Furniture Project Plans if you’re able to have a dedicated spot for a workshop all the better. Floor gear and bench top gear can stay in place from project to project. If this installation isn’t impossible, at least try to create a bench area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and gear. In the beginning, set up a bench area where you are able to store and use most of your gear, with a temporary expansion of your actions onto the basement or garage floor.

A basic workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. Add a sturdy shelf beneath the seat to home your hands power tools and a pegboard above the seat to hang other gear. Put in a woodworking at one end of the bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Furniture Project Plans

The reach of your start-up equipment will be mostly based on your financial plan. Whether you have got big financial resources or you are starting on a shoestring consistently buy quality equipment. If you can afford it, purchase your quality tools at the local construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative local advertisements. You will find an abundance of quality lightly used programs out there which belong to individuals who stumbled on that one molding job around the house or obtained tools as presents that they will never use. You can usually buy tools for these sellers for less than half the original cost and save even more money should you make a package deal for all their unused equipment. Obviously, acquiring tools from private people will take additional time and perhaps travel expenditures. Weigh the benefits of traveling across town to save a couple extra dollars on a inexpensive piece of equipment. The excess expense of time and travel in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or large finished tools like surface planers later on.
For smaller acquisitions, a trip to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimal amount of hand gear yet produced sophisticated and complex pieces. Concentrate on developing your skills with your startup set of tools and prevent lamenting about the equipment you wished you’d.
Here’s a checklist of the useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a nice pair of safety glasses that also offer you some side protection to your eyes. Purchase a quality oil collection that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually hamper your vision and influence security. Avoid wearing goggles in a workshop. Most impair vision and dust up fast. You may avoid wearing all of them together in the event that you find them uneasy.

The next piece of crucial safety gear that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking may be long-term and noisy exposure to those noise levels may affect hearing and lead to tinnitus and other hearing losses. I’m keeping the dust from my hair. I’m all set!

Power Hand Saw: Often known as a skill saw following the popular name, this can end up being the most versatile tool in a start-up workshop. In reality, in the hands of a professional, a power hand saw can be used to construct an whole house. Eventually, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a budget enables him to do cross cuts, rip cuts and even intricate angle cuts. As mentioned before get an excellent brand saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you start your next job. After choosing the right saw install an excellent blade. Most saws include a starter blade of lesser quality even if they are a good saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Start with a hybrid . These possess a balanced tooth count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument can’t only cut corners. It’s perfect for cutting holes in timber also like handle slots. At some point, you’ll want to get a band saw. Bandsaws are even more versatile but a excellent floor unit could be expensive. A jigsaw may be a fantastic stop gap to the novice woodworker.

Buy an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss over the standard 3/8 inch version. Through hard lessons learned, I have discovered that buying quality, in this case, is more critical than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their battery life will be bad and to make matters worse keyless chucks come loose and slip frequently. This is 1 annoyance you do not want on your workshop. Buy an range of quality carbide tipped drill bits which are kept in a holder tagging each drill bit size. Create a habit of returning each drill bit to its prospective slot in the holder after every use. Lastly, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most versatile instrument in the shop, and often the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop accidents happen. Although the most ordinary, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The good hammer is balanced, does not rust and comes with a comfortable handle. Most hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood grips with poor joints between the head and handle. The head usually comes loose and the tool becomes useless. Pick a name brand quality hammer in the 16-ounce range for overall work and a smaller finishing hammer for more complex work. Avoid using big framing hammers in the workshop and some other with dimpled head tips. These types of hammers are more appropriate to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can handle just about any sanding requirements you have as a beginner woodworker. As your woodworking skills evolve, you will probably upgrade to a floor model disk and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and even limited quantities of surface area. As you embark on your first few projects you might discover your palm sander with just a little bit of effort can transform rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and shape rough boards using 100 grit paper and later finish your job with 200 or 300 grit paper. Buy an range of sandpaper sheets using an excess supply of 100 grit paper. You’ll find this caliber of paper the most versatile on your shop.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Though low tech in theory, these tools allow you to taper edges, flatten high spots and correct any imperfections in wood bits. {Start with a typical amount 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, good clamps are costly and it usually takes the novice woodworker a couple of years to collect a comprehensive set of timber clamps. Start with a pair of extended”pipe” clamps. Now the pipe has been replaced with extended steel shafts, however, the structure is still the same. Get a pair of the maximum clamps which you can spend. You may contact them for smaller glue jobs and enlarge them to their entire length for bigger projects.

Shop Vice: A store vice installed at the end of the bench is ideal for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices using their wood clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the better vices offer quick release mechanisms that enable the consumer to rapidly open and close the jaws with no tedious handle rotation. The wood beamed surfaces in your vice will periodically require replacement. I prefer to utilize soft walnut in my vices which will not crush or damage many of the various woods that I utilize. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be one of the most often used tools. Buy a good excellent name brand tape measure with a broad tape usually from the 25-foot selection. Although in your shop you might not be using the tape in these lengths, the larger tape measures provide more rigid tapes that won’t flop around and slip off the ending of planks. Measuring when you are by yourself will be a lot easier, and of course, quality tape steps can endure for several years.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood. Avoid oversize carpenter’s pencils. Their large flat leads are just too rough for precise measurement in the workshop.

Other Tool and Materials: Here are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools can help you in marking the ideal angles as well as compound angles. Also, get an assortment of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find that the Robertson format works great for most woodworking projects and will be the most compatible with a drill powered bits. Last, get a pair of 12-inch wood files. The cost of glue through all of your jobs is a little cost consideration. Therefore, it makes sense to go with the very best. I have also discovered over the years that I get the best results with both indoor and outdoor jobs once I use quality outdoor grade adhesive. All these resin-based compounds unlike traditional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Furniture Project Plans

The peaceful gratification of woodworking is an excellent experience in this era of hurried lives, smart phones, and time-starved livelihood. With a minimum investment at the most rudimentary tools and equipment, everyone can learn the profitable skills of his time-tested hobby and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Florence Knoll

Florence Marguerite Knoll Bassett (née Schust; May 24, 1917 – January 25, 2019)[1] was an American architect and furniture designer who studied under Mies van der Rohe and Eliel Saarinen. She was born Florence Schust in Saginaw, Michigan, and was known in familiar circles as "Shu".[2]

She created the modern look and feel of America’s postwar corporate office with sleek furniture, artistic textiles and an uncluttered, free-flowing workplace environment. The company she formed with her husband, Knoll Associates, grew to become the leading innovator of modern interiors and furnishings in the 1950s and 1960s, transforming the CBS, Seagram and Look magazine headquarters in Manhattan. Her “total design” favored open work spaces over private offices, and furniture grouped for informal discussions. It integrated lighting, vibrant colors, acoustic fabrics, chairs molded like tulip petals, sofas and desks with chrome legs, collegially oval meeting tables, and multilevel interiors, more architectural than decorative, with open-riser staircases that seemed to float in the air.[3]

Florence Marguerite Schust was born in Saginaw, Michigan to Frederick Emanuel (1881–1923) and Mina Matilda (Haist) Schust (1884–1931). Frederick Schust was born about 1882 in either Switzerland or Germany, was a native German speaker, and the 1920 United States Federal Census describes him as the superintendent of a commercial bakery. Mina was born about 1887 in Michigan, and her parents had been born in Canada.[4] Frederick died relatively young, some time before the 1930 United States Federal Census.[5]

Video: Woodworking Tools