Furniture Protection Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable ideas and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and a few of those attributes along with a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an educator and a part of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking whenever they’re after because all the thoughts and projects Ted’s source are easy to comprehend and easy. Ted McGrath spent two years researching so that he could collect enough material for an extensive package, and he ended up creating a really’complete’ woodworking source.

Many may still appear unsure whether they should be purchasing Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it more difficult to make the right option. There are in fact many things that set Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to profit from Ted’s woodworking Package. People who are just getting started will discover the ideas and jobs in Ted’s bundle quite easy. Without doubt, complicated carpentry is involved; nonetheless, they will find it really simple to follow Ted’s easy step by step directions. Currently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who buy his package, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a lot about woodworking. They will also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers are going to be able to locate any project of their choice within this package quite easily, though there numerous choices.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and people who buy it’ll be endorsed by a 60-day guarantee, so when this woodworking bundle fails to meet them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long time to down because of its large size. Yet, using a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

As there are several ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nevertheless, they did not mind being overwhelmed considering how this package is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast that it contains just about every woodworking project a woodworker may be considering building.

This woodworking package created by Ted McGrath is really unmatchable and can’t be compared to those other woodworking bundles that are available across the net. Ted has done his best to direct them in every possible way he could, through easy to comprehend textual directions, clear images and even videos as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking projects they will find inside. Therefore, it is certainly worth buying!

Finding Woodworking Projects and Plans for Beginners Furniture Protection Plans

Woodworking is one hobby that can also be a rewarding career if you like to work together with your hands and construct beautiful pieces of furniture from wood. When you learn the woodworking crafts and eventually become a nice woodworking craftsman, you’ll be able to build all types of furniture, (table, beds, and chairs), with ease. You can then sell your completed woodworking jobs and make a handsome profit. Furniture Protection Plans.

It requires time to become proficient in the craft of woodworking. The nice thing about working up to this expert craftsman degree is you will be able to create some really nice furniture to you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit in your living room. It will be a topic of conversation when you have friends come over to visit. They’ll ask: How did you make it? Just how long can it take to complete the project? What type of tools did you use? Just how on earth did you create such a beautiful piece of furniture? As you speak about your work, a sense of pride will come over you and do not be surprised if your friends ask you to make one for them too!

The Benefits of Woodworking Furniture Protection Plans

If you’re thinking you are just too old or too young for woodworking, think again! You are never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to Begin in Woodworking? Furniture Protection Plans.

Start with an idea in mind of what you would like to build and then get a excellent woodworking project plan that is geared toward novices. There are several small woodworking projects for beginners available for purchase from online woodworking merchants. Of course, you can begin with as grand a woodworking plan as you choose. However, the odds are if you start out with a little woodworking job initially, you will get a better chance of keyword completing the project.

Your woodworking project plan should include some lists! Lists of: woodworking equipment, the amount and type of wood required, and the required hand tools and power tools to complete the project. Note: A word of caution about purchasing woodworking tools. Just buy what you want to finish your instant or upcoming endeavor. This is important especially if you’re a beginner and just starting out. Tools aren’t cheap. The newcomer needs good woodworking tools, but it is simple to break the bank buying a great deal of tools you might not utilize all that frequently. If you do buy gear, buy quality. Do a bit of research and compare goods. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting angles), a coping saw, complete punches, flat and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not forget that the wood glue and a brush to spread the wood glue! Of course, you’ll need a dry place to work and might require a pair of horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of substance and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more innovative hand tools and much more woodworking power tools , but the idea is to purchase the essential hand and power tools which beginners will need. You may always add to your arsenal as you get experience!

Furniture Protection Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you have purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. However, if you’re unsure about what to do there is help available! There are lots of areas that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of the several woodworking magazines available. Each month the writers in woodworking magazines do a story about how to improve your woodworking craft. When it’s showing you how you can apply an end to a finished project, or how to create a mortise and tenon joint, something new can be heard each month. Next, is buying instructional DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to use a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Furniture Protection Plans

If you’re just beginning and very interested in doing a DIY job for house then, woodworking could be fun. If you don’t have the proper information, instruction, and ability, you might land up spending more time and money than you originally meant to spend. As a novice woodworker, you want to have space, time and the correct tools. Having mentioned, there are a few essential factors you should keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you should first need to be somewhat interested in woodworking. Making something new with your hands is a special sense. Do not begin a project if you’re not interested, as this may land you in a terrible place.

2. Consider the primary reason behind making this woodworking project. Choose the uses of this thing you’re making.

3. Consider your skills and examine the time you have, before you start with a job.

4. Start jobs that you can finish. If you are in the middle of some work, then it’s better to not start any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Furniture Protection Plans

If you keep these essential points in your mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires planning as much because it takes effort. So how can you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to choose the woodworking jobs that you wish to start with. As a newcomer, always select a job that has a very basic construct up or a very simple structure. Some easy to start projects include, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you can always move into the next level of woodworking jobs, such as cabinets, sheds, and others. Beginning projects should keyword be less complicated and less frustrating so that you have a better comprehension of working with forests and their tools. Once the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Furniture Protection Plans

Tools would be the means through which you can win the struggle of woodworking. A lot of men and women think that power tools are needs. However, for novices, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is the hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for precise cuts and dimensions. The workbench, when mended with vises, provide ample space to operate. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer can make matters considerably simple for you. When you purchase a hammer, always check the equilibrium between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are different types of saws out there on the market. Choose a size which you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them can help you ahead of time woodworking. You might also purchase keyword power screwdrivers since they make the job much quicker.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you demand a wrench. However, this is not a tool for novices, but having it might make work simpler for you in a subsequent stage.

7. Drill – Drill helps you create holes in timber. Power drills are more useful but they cost more. Low wattage power drills can make the job much simple.

8. Additional small and fundamental tools – These include pencils, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s not any fixed cost on woodworking projects. Based on the type of job you want to complete, pricing can be set. The easy the project, the less price it involves. But at the very beginning buying the tools will be somewhat hefty. Therefore, it is better to fix a budget first on the tools, then keyword on the undertaking. Purchasing the basic tools will make certain you do not have to purchase any more material other than the wood ply.

Time and Instructions

Instructions are one of the primary things that every newcomer should follow. Instructions manual is very simple to comprehend the procedure, what to do and the way to do it. It keyword is a systematic manual for completing the project. Time also has an important role in the building of woodworking jobs. Woodworking projects demand time and therefore it is necessary for a beginner to have ample quantity of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most essential thing keyword which can help you to achieve success is proper preparation. With proper planning and a strategy, it’s possible to achieve success immediately. If you understand the purpose of woodworking, then the thing you need to build, the resources you require in order to own and the typical time you can devote daily; then you are all set to go.

Conclusion, Furniture Protection Plans

All these tips and instruction will make the woodworking projects and plans for beginners fast to finish. Always ensure that you have all the essential tools, materials, area prepared. Keep the instructions for building an item handy. Proper strategy and preparation will allow you to make a fantastic woodworking job for your property.

|

How to Become a Master Woodworker From Your Own Home Furniture Protection Plans

Folks when looking for a way to pass time or want an alternate way to generate money they generally turn to a hobby that they enjoy. Woodworking is one of the hobbies individuals turn to perform as a hobby or home based business. It is very exciting to do and everyone can get started.

When doing woodworking in your home there are a lot of projects one can consider. When starting out you need to be quite cautious when choosing which job to begin with since you will find jobs that can be too tough for a newbie. But do not worry about that because we are going to provide you tips on the ideal means to begin woodworking as a beginner.

The same as any other hobby woodworking requires some working gear, so before you choose your job you have to be aware of whether you’ve got the available resources to work on such a project. Try not to spend a lot of money on purchasing gear when starting out, purchase more gear as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there will be no difference between the hand and the hands.

Woodwork Crafts – The Beginners Guide To Woodworking Furniture Protection Plans

Woodworking in your home will give you time to explore different jobs and find out a lot of things. That is why it’s important to spend less money when starting out so you can afford to make mistakes and at some time learning about different projects.
It’s very important that you know about different types of wood available for creating jobs. Anticipate carpenters use several types of wood quality for decorating pieces, learning what kind of wood they use will allow you to prepare the wood you will need for certain projects you might choose to pursue.
As soon as you know the fundamentals of wood choice and the use of different tools you can now implement them in cutting out well wood pieces and putting wood together. Knowing what to do can help you in creating good projects to satisfy your wants.

Furniture Protection Plans practice makes perfect so make sure you practice your work every day if at all possible. Try out lots of designs utilizing various tools so that you can get the hang of using the tools. When starting out you can make a range of mistakes but with time you will learn how to correctly utilize them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Furniture Protection Plans

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You can begin on a shoestring with a minimum number of tools and equipment. A little home workshop may produce a wide array of simple projects which can allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products which you are able to appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let us talk about where you’ll do your woodworking, based on the size of your home, you might have the ability to produce a dedicated space into your woodworking tasks. This might be a reserved spot in your garage or on your basement. In some cases, a detached shed or outbuilding might be ideal to prepare your very first shop. A heated store detached from your house provides one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably produce dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems in which cold air returns found in the cellar draw dust up into the upper levels of the home. Another benefit of detached workshops would be, of course, the sound level. You can work without bothering the remainder of the household. A good compromise might be the garage of your property.

This might help minimize the problems of dust and sound, however depending on where you live, a keyword garage workshop may not be practical during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Furniture Protection Plans

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes that they add more space to function in. Furniture Protection Plans if you can have a dedicated spot for a workshop all the better. Floor tools and bench top equipment can remain in position from project to project. If this installation isn’t hopeless, at least try to create a bench area where equipment could be saved and pulled out as needed. If at all possible plan for inevitable growth as you acquire more tools and gear. In the start, set up a bench area where you are able to store and use most of your equipment, with a temporary expansion of your activities onto the garage or basement floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. This will enable you to work comfortably while standing. Add a sturdy shelf beneath the bench to home your hand power tools along with a pegboard above the bench to hang additional equipment. Put in a woodworking at one end of your seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Furniture Protection Plans

The reach of your start-up equipment will be mostly based on your budget. Whether you have got large financial resources or you are starting on a shoestring always buy quality equipment. If you can afford it, buy your quality tools in your regional construction and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other local advertisements. You will find plenty of quality gently used tools out there that belong to people who stumbled on that one molding project around the home or received tools as presents which they will never utilize. You can usually purchase tools for all these sellers for under half the original cost and save even more money if you create a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will take extra time and perhaps travel expenses. Weigh out the benefits of traveling across town to save a couple added bucks on a cheap piece of gear. The extra cost of travel and time in these situations is usually justified when buying large ticket items like table saws, bandsaws or high ended tools such as surface planers in the future.
For smaller acquisitions, a visit to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimum quantity of hand equipment yet produced sophisticated and intricate bits. Focus on developing your skills with your start-up set of resources and avoid lamenting about the gear you wished you’d.
Here is a listing of the more useful tools you’ll need to get started:
Safety Gear: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer some side protection to your eyes. Purchase a quality acrylic set that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually hamper your vision and influence safety. Avoid wearing gloves at a workshop. Most impair eyesight and dust up quickly. You can avoid wearing them all together if you find them uneasy.

The next bit of critical safety gear you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking can be long-term and noisy exposure to these sound levels can affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most workers tire faster when exposed to elevated noise levels. Select powerful hearing protection that you find comfortable and effective. Last, put on a cap to keep the dust out of your hair. With this setup I’m protecting my eyes and my ears. I’m keeping the dust out of my hair. I am all set!

Power Hand Saw: Frequently referred to as a skill saw after the popular brand name, this may prove to be the most flexible instrument in a start-up workshop. In fact, in the hands of an expert, a power hand saw could be employed to construct an entire house. As mentioned before get an excellent manufacturer saw. Avoid cheap unknown brands. These tend to cut inaccurately and will burn out before you start your second job. After selecting the proper saw put in a quality blade. Most skill saws come with a starter blade of lesser quality even if they’re a good saw. Keep this blade as a copy and install an excellent blade with carbide teeth. Begin with a hybrid blade. These possess a balanced tooth count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool cannot only cut corners. It is perfect for cutting holes in timber also like manage slots. At some point, you’re going to want to obtain a ring saw. Bandsaws are even more flexible but a quality floor unit could be expensive. A jigsaw can be a good stop gap for the novice woodworker.

Buy an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss within the standard 3/8 inch model. Through tough lessons learned, I have discovered that buying quality, in this scenario, is much more crucial than ever. Cheaper drills tend to get very short run times and have to be recharged frequently. Their long-term battery life will be bad and to make things worse keyless chucks come loose and slip often. This is one annoyance you do not need on your workshop. Buy an range of superior carbide tipped drill bits which are kept in a holder labeling each drill bit size. Make a habit of returning each drill bit to its potential slot in the holder after each use. Last, get a set of hard steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries occur. Even though the most frequent, hammer injuries are often of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and features a comfortable handle. Many hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The mind usually comes loose and the instrument becomes useless. Select a title brand quality hammer in the 16-ounce scope for overall work and a smaller completing hammer for more complex work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These types of hammers are more suited to rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can handle pretty much any trimming requirements that you’ve got as a beginner woodworker. As your woodworking skills evolve, you will likely update to a floor model disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface area. As you embark on your first few projects you’ll discover your palm sander using a bit of effort can transform rough looking inventions into virtual functions of art! You can use your palm sander to sand and shape rough boards with 100 grit paper and later finish your work with 200 or 300 grit paper. Buy an assortment of sandpaper sheets using an extra source of 100 grit paper. You’ll find that this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Though low tech in concept, these tools enable you to taper borders, sew high stains and correct any imperfections in timber bits. {Start with a standard number 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood pieces as you operate on them. Unfortunately, superior clamps are costly and it normally requires the beginner woodworker a few years to collect a detailed set of timber clamps. Begin with a pair of extended”pipe” clamps. Today the pipe was replaced with extended steel shafts, however, the structure is still the same. Get a set of the maximum clamps that you can afford. You can contact them for smaller glue jobs and expand them to their entire length for bigger projects.

Shop Vice: A store vice installed at the end of the bench is perfect for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the better vices offer you rapid release mechanisms that enable the user to rapidly open and close the limbs without dull handle rotation. The timber beamed surfaces on your vice will periodically require replacement. I prefer to utilize soft pine in my vices that won’t crush or damage many of the various forests that I work with. Whether I am working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be one of the most frequently used tools. Buy a good excellent name brand tape measure with a wide tape typically from the 25-foot range. Although in your store you might not use the tape in these spans, the larger tape measures provide more rigid tapes that won’t flop around and slip off the ending of planks. Measuring when you are by yourself will be a great deal easier, and of course, quality tape steps can last for several years.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will need extra sanding.

What is Woodworking? Finding Woodworking Projects and Plans for Beginners Furniture Protection Plans

Woodworking is referred to as the construction or the production of objects from wood. You can produce a lot of different items from woodworking and these objects are often as large as gazebos or as little as wooden toys. No matter how large or small your personal project maybe you will be very likely to do that aim with woodworking. In addition, woodworking has lots of private in addition to psychological benefits! In the following article, I will briefly identify some of the benefits for youpersonally.

Woodworking as a Career:

People who build things from wood are generally known keyword because carpenters. Carpenters can operate on a variety of woodworking jobs and occupation types. For instance, some carpenters possess their carpentry company and these folks have the luxury to set their job hours. This advantage allows carpenters the opportunity to spend additional time with their own families and also have less job stress. Raising children is a really difficult task regardless of what way you approach the endeavor! To get a carpenter who possesses their own company, this job may not be hard since that person will have more time to be a part of her or his child’s life. By playing a larger part in the life span of your child you will be having a larger influence on the sort of personality that child develops into, which is a massive concern for any loving parent. In addition to such advantages, carpentry can also have health benefits as well.

Woodwork Crafts – The Beginners Guide To Woodworking Furniture Protection Plans

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood round a lot. This results in more physical activity, which leads to better physical health. Keeping your body physically fit is really important and keyword will help prevent the incidence of various ailments later on in life. By being physically fit you can decrease chances you will have a heart attack, have seizures, become a diabetic, and lower the chances of giving birth to a number of different illnesses.

Furniture Protection Plans, Do It Yourself Woodworking Saves Money:

I always feel like that I paid way too much when I visit home improvement shops and buy patio furniture, and I am certain that I’m not the only person who has felt this way! A successful business owner once told me to always raise the sales price of a commodity to double what you obtained it for. In this manner, you always have the option to decrease the product to 50 percent off and still come out without acquiring any losses. This sounds like it may be the same strategy that home improvement shops use in selling their wooden furniture solutions. Regardless, there’s a way that you can get around paying the extra cash and that has to do with building it yourself. Fortunately, there are some really good woodworking products offering thousands of detailed woodworking keyword strategies for countless different project types. Thus, you can really build anything you want or see in almost any home improvement store. Doing something does take a little bit of time but time is well spent when you wind up saving hundreds of dollars as a result of your hard work.

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Thomasville Furniture Industries

Thomasville Furniture Industries was a full-line furniture manufacturer once based in Thomasville, North Carolina, with dedicated galleries in more than 400 retail furniture stores. Additionally, there are 30 Thomasville Home Furnishing stores which carry only Thomasville products. The company had been a subsidiary of Clayton, Missouri-based Furniture Brands International since 1995. Heritage Home Group bought most of that company's assets in 2013 and announced the end of Thomasville Furniture's operations in Thomasville in 2014.

Thomasville Cabinetry is crafted by MasterBrand Cabinets, Inc. a division of Fortune Brands Home and Security (FBHS). MasterBrand Cabinets produces Thomasville branded product for Thomasville Furniture Industries at several North American facilities, and sells the Thomasville Cabinetry brand exclusively through The Home Depot. Schrock Cabinetry of Illinois, for example, is one manufacturer that makes cabinets sold by the Home Depot with the Thomasville Cabinetry name stamped in it.

The famous Big Chair, an 18-foot reproduction of a Duncan Phyfe design (first erected in 1922 and rebuilt in 1951) still stands in the town square as a symbol of the mutual success of a now famous chair company - and the town that cherishes its nickname, "Chair City".

Video: Woodworking Projects