Furniture With Payment Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable thoughts and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and a few of those qualities along with a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, himself is also an instructor and a part of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking whenever they’re after because most of the thoughts and jobs Ted’s source are easy to understand and simple. Ted McGrath spent two years exploring so he could collect enough material for a comprehensive bundle, and he ended up creating a really’complete’ woodworking source.

Many may still seem unsure if they need to be purchasing Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it more difficult to make the right option. There are in fact lots of things that place Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit from Ted’s woodworking Package. People who are just getting started will discover the thoughts and projects in Ted’s bundle quite simple. Without doubt, intricate carpentry is demanded; however, they will find it really easy to follow Ted’s simple step by step instructions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who purchase his package, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that will help beginners learn a whole lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers are going to be able to locate any job of their choice within this package quite easily, even though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and people who purchase it’ll be endorsed by a 60-day warranty, so if this woodworking package fails to meet them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long time to down because of its large dimensions. Nonetheless, with a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nevertheless, they didn’t mind being overrun considering the fact that this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so thorough and vast it contains just about every woodworking project a woodworker might be considering building.

This woodworking bundle created by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking packages that are available throughout the internet. Ted has done his best to direct them in every possible way he could, through easy to comprehend textual directions, clear pictures and even movies as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find inside. So, it’s definitely worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Furniture With Payment Plans

Woodworking is one hobby that can also be a rewarding career if you love to work together with your hands and build exquisite pieces of furniture from wood. When you learn that the woodworking crafts and become a nice woodworking craftsman, you’ll have the ability to construct all types of furniture, (beds, table, and chairs), effortlessly. You can then sell your completed woodworking jobs and make a handsome profit. Furniture With Payment Plans.

It takes time to become skilled in the craft of woodworking. The nice thing about working up to that expert craftsman degree is you’ll have the ability to build some really nice furniture to you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit on your living space. It will be a topic of conversation whenever you have friends come over to see. They will ask: How did you create it? Where did you get the woodworking plans? How long can it take to complete the job? What type of wood did you use? What kind of tools did you use? Just how on earth did you create such a gorgeous piece of furniture? As you discuss your job, a sense of pride will encounter you and also don’t be surprised if your friends ask you to create one for them too!

The Benefits of Woodworking Furniture With Payment Plans

If you’re thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such an enjoyable hobby and it’s perfect for beginners!

Where to begin in Woodworking? Furniture With Payment Plans.

Start with an idea in your mind of what you would like to build and then get a excellent woodworking project plan that is geared toward novices. There are numerous little woodworking projects for beginners available for sale from online woodworking merchants. Of course, you can start out with as grand a woodworking plan as you pick. On the other hand, the odds are if you start out with a small woodworking job at first, you will have a better chance of keyword completing the project.

Your woodworking project plan must incorporate some lists! Lists of: woodworking equipment, the quantity and variety of wood required, and the required hand tools and power tools to finish the project. Note: A word of caution about purchasing woodworking tools. Only buy what you need to finish your instant or upcoming project. This is important especially if you’re a beginner and just beginning. Tools are not affordable. The newcomer needs good woodworking gear, but it is simple to break the bank buying a great deal of tools you may not use all that often. When you do buy tools, buy quality. Do a little research and compare products. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, complete punches, flat and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and don’t overlook the wood glue and a brush to spread the wood glue! Of course, you will need a dry place to work and might require a pair of horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more innovative hand tools and much more woodworking power tools , but the concept is to buy the essential hand and power tools which beginners will need. You can always increase your toolbox as you gain experience!

Furniture With Payment Plans Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you’ve purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to finish your project. But if you are unsure about what to do there is help available! There are lots of areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of the many woodworking magazines available. Each month the writers in woodworking publications do a story about how best to improve your woodworking craft. When it is showing you the way to apply an end to a finished job, or how to create a mortise and tenon joint, something new can be heard every month. Next, is purchasing instructional DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to work with a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Starting Your First Woodworking Shop Furniture With Payment Plans

If you’re just beginning and very interested in doing a DIY project for home then, woodworking can be fun. If you do not have the right information, instruction, and skill, you might wind up spending more money and time than you initially intended to spend. As a novice woodworker, you want to have time and the appropriate tools. Having said, there are a few essential factors you need to keep in mind, before starting with any woodworking project.

1. If you are just beginning, you should first need to be somewhat interested in woodworking. Making something new with your hands is a particular feeling. Don’t start a job if you are not interested, because this might land you at a bad place.

2. Think of the primary reason for creating this woodworking project. Choose the uses of this item you are making.

3. Consider your skills and examine the time you have, until you begin with a project.

4. Start projects that you’re able to complete. If you are in the middle of some work, then it is wise not to begin any project at all.

Finding Woodworking Projects and Plans for Beginners Furniture With Payment Plans

If you keep those vital points in mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires preparation as much as it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to choose the woodworking projects you want to begin with. As a newcomer, always select a project that has a very basic construct up or a simple construction. Some easy to start projects include, bird feeder, chairs, shelves, etc.. As soon as you find the techniques, you could always move to the next level of woodworking jobs, such as cupboards, sheds, along with others. Beginning projects should keyword be complicated and less bothersome so that you have a better knowledge of working with woods and their tools. Once the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Furniture With Payment Plans

Tools would be the ways whereby you will win the battle of woodworking. A lot of people believe power tools are requires. However, for beginners, basic hand tools can be quite handy and more than helpful in completing a job. If woodworking is the hobby, then a few tools that you would require are:

1. Workbench – A workbench is needed for precise cuts and measurements. The workbench, when mended with vises, offer ample space to work. As a key tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer will make things considerably easy for you. When you buy a hammer, constantly check the equilibrium between the weight and stand. Always select a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool helps you to cut forests at different sizes. There are various sorts of saws out there in the marketplace. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Possessing all of them can help you in advance woodworking. You can even purchase keyword power screwdrivers since they make the work much faster.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape helps you to measure wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you require a wrench. However, this is not a tool for beginners, but using it might make work easier for you at a subsequent stage.

7. Drill – Drill makes it possible to make holes in timber. Low wattage power drills will make the job much easy.

8. Other small and basic tools – These include pencils, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s no fixed cost on woodworking projects. Dependent on the sort of job you want to complete, pricing can be determined. The simple the job, the less price it involves. But at the very beginning purchasing the tools will be somewhat hefty. Because of this, it is much better to resolve a budget on the resources, then keyword on the project. Purchasing the basic tools will ensure that you do not have to buy any more material other than the timber ply.

Time and Directions

Instructions are one of the primary things that each and every beginner should follow. It’s like the woodworking Bible. Instructions manual is quite simple to comprehend the process, what to do and how to get it done. It keyword is a systematic guide for finishing the job. Time also plays a significant part in the building of woodworking jobs. Woodworking projects demand time and so it is necessary for a novice to have ample amount of time every week.

Ideas for Beginners

There are no quick tips or suggestions that would make the work easy. But the most indispensable thing keyword which can allow you to reach success is proper preparation. With appropriate planning and a strategy, it is possible to achieve success immediately. If you understand the purpose of woodworking, then the item you want to construct, the resources you require in order to possess and the typical time it’s possible to devote every day; then you are all set to go.

Conclusion, Furniture With Payment Plans

These tips and education is likely to create the woodworking projects and plans for novices fast to complete. Always ensure that you have all of the essential tools, materials, space ready. Keep the instructions for building a product handy. Proper strategy and preparation will allow you to make a fantastic woodworking job for your property.

|

Starting Your First Woodworking Shop Furniture With Payment Plans

Folks when looking for a way to pass time or desire an alternative method to generate money they generally turn into a hobby that they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based business. It is very exciting to do and anyone can get started.

When doing woodworking at home there are a lot of jobs one can think of. When starting out you need to be quite careful when choosing which project to begin with since there are jobs which may be too tough for a newbie. But do not be concerned about that since we will give you tips on the right means to start woodworking as a newcomer.

The same as any other hobby woodworking requires some working gear, so before you pick your job you need to be aware of whether you’ve got the available resources to work on such a job. Try not to spend a lot of cash on purchasing equipment when starting out, purchase more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there will not be any gap between the hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Furniture With Payment Plans

Woodworking in your home will provide you time to research unique jobs and find out a lot of things. That’s why it’s very important to invest less money when starting out so you can manage to make errors and at some time learning about various projects.
It is very important you know more about different types of wood available for making projects. Expect carpenters use different types of wood quality for decorating bits, learning what kind of wood they use will allow you to prepare the wood you will need for certain jobs you might choose to pursue.
As soon as you understand the basics of wood selection and the use of different tools now you can implement them in cutting out well wood pieces and placing wood together. Knowing what to do can assist you in building good projects to fulfill your needs.

Furniture With Payment Plans practice makes perfect so make sure you practice your work every day if possible. Try out a lot of designs using a variety of tools so you can get the hang of working with the tools. When starting out you can earn a range of errors but with time you will learn how to correctly utilize them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Furniture With Payment Plans

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You may get started on a shoestring with a minimal amount of tools and equipment. A little home workshop may produce a wide variety of simple projects that will help you develop your creative and construction abilities while rewarding you with artistic and practical wood products that you are able to enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let’s talk about where you’ll do your woodworking, based on the size of your house, you may have the ability to create a dedicated space into your woodworking activities. This may be a reserved place in your garage or on your cellar. In some cases, a detached shed or outbuilding may be ideal to set up your first shop. A heated shop detached from your house provides one distinct advantage: better pest management. Without complex dust control systems, basement assignments will inevitably produce dust that travels into the living area of your house. This is very true in homes with forced air heating systems where cold air yields located in the cellar draw up dust into the upper levels of the house. Another advantage of detached workshops is, of course, the sound level. It’s possible to work without disturbing the remainder of the family. A fantastic compromise could be the garage of your home.

This can help minimize the difficulties of dust and noise, however based on where you live, a keyword garage workshop might not be sensible during extremes of cold or hot weather.

Starting Your First Woodworking Shop Furniture With Payment Plans

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes that they include more space to function in. Furniture With Payment Plans if you’re able to have a dedicated spot for a workshop all the greater. Floor tools and bench top equipment can stay in position from project to project. If this installation is not hopeless, at least try to make a chair area where equipment can be saved and pulled out as needed. If at all possible plan for inevitable growth as you acquire more tools and gear. In the start, set up a bench area where you are able to shop and use most of your gear, with a temporary expansion of your activities onto the garage or basement floor.

A basic workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Add a sturdy shelf beneath the bench to house your hands power tools and a pegboard over the seat to hang additional gear. Put in a woodworking vice at one end of your seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Furniture With Payment Plans

The scope of your start-up equipment will be mostly based on your financial plan. Whether you have got big financial resources or you are starting on a shoestring consistently purchase quality equipment. If you can afford it, then buy your quality tools at your local building and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or alternative local advertisements. There are an abundance of quality lightly used tools out there which belong to people who stumbled on that one molding project around the house or obtained tools as presents which they will never utilize. You can usually purchase tools for all these sellers for less than half of the original price and save even more money if you make a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will require additional time and perhaps travel expenses. Weigh out the benefits of traveling across town to save a few added bucks on a cheap piece of equipment. The excess cost of time and travel in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or large finished tools like surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal quantity of hand equipment yet produced sophisticated and intricate bits. Focus on developing your abilities with your start-up set of tools and avoid lamenting about the gear you wished you had.
Here’s a listing of the more useful tools You Will Need to get started:
Safety Gear: Start as expected by eye protection. Get a decent pair of safety glasses which also offer you some side protection for your eyes. Purchase a quality oil collection that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually hamper your vision and influence safety. Avoid wearing goggles in a workshop. Most impair vision and dust up quickly. You can avoid wearing all of them together in the event that you find them uneasy.

The next bit of critical safety equipment that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking may be noisy and long-term exposure to those sound levels may affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most employees tire quicker when exposed to high noise levels. Last, put on a cap to keep the dust from your hair. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently known as a skill saw after the popular name, this may prove to be the most versatile tool in a startup workshop. In reality, in the hands of an expert, a power hand saw can be used to construct an whole house. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. These are inclined to cut back and will burn out before you even start your second job. After selecting the right saw put in a quality blade. Most saws include a starter blade of lower quality even if they’re a good saw. Keep this blade as a copy and put in an excellent blade with carbide teeth. Begin with a hybrid . These have a balanced enamel count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool can’t just cut corners. It’s perfect for cutting holes in timber also like handle slots. Eventually, you’re going to want to get a ring saw. Bandsaws are much more versatile but a quality floor unit could be costly. A jigsaw can be a good stop gap to the novice woodworker.

Purchase an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the conventional 3/8 inch version. Through hard lessons learned, I have found that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills have a tendency to have very short run times and need to be recharged frequently. Their battery life tends to be poor and to make matters worse keyless chucks come loose and slide frequently. This is one annoyance you don’t need on your workshop. Purchase an assortment of superior carbide tipped drill bits that are kept in a holder labeling each drill bit size. Create a habit of returning each drill piece to its prospective slot at the holder after every use. Last, get a pair of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer remains as the most versatile tool in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop injuries happen. Even though the most ordinary, hammer injuries are often of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and features a comfortable grip. Most hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers usually have wood handles with poor joints between the handle and head. The head usually comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce scope for general work and a smaller completing hammer for more complex work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These types of hammers are more suited for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can handle pretty much any sanding requirements you’ve got as a novice woodworker. As your woodworking skills evolve, you’ll likely upgrade to a floor version disc and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on the first few projects you’ll discover your palm sander with a little bit of effort can change rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and shape rough boards with 100 grit paper and later finish your work with 200 or even 300 grit paper. Purchase an range of sandpaper sheets using an excess supply of 100 grit paper. You’ll find that this caliber of paper that the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Although low tech in theory, these tools enable you to taper edges, flatten high spots and correct any imperfections in wood bits. {Begin with a standard amount 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, good clamps are expensive and it normally requires the beginner woodworker a few years to collect a comprehensive set of timber clamps. Start with a pair of long”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure is still the same. Receive a set of the maximum clamps which you can afford. You can contact them for smaller glue jobs and enlarge them to their entire length for larger jobs.

Shop Vice: A shop vice installed at the end of the seat is ideal for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and avoid metal functioning vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the better vices offer quick release mechanisms that enable the consumer to rapidly open and close the jaws without dull handle turning. The wood clamping surfaces on your vice will periodically require replacement. I would rather use soft walnut in my vices that won’t crush or damage lots of the various woods that I work with. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be among your most frequently used tools. Buy a fantastic excellent name brand tape measure with a broad tape usually from the 25-foot selection. Even though in your store you may not use the tape at these spans, the larger tape steps provide more rigid tapes which won’t flop around and slip off the ending of planks. Measuring when you are on your own will be a great deal easier, and of course, quality tape steps can endure for several years.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will need extra sanding. Avoid oversize carpenter’s pencils. Their large flat leads are simply too rough for precise measurement in the workshop.

Additional Tool and Materials: Here are a few other useful tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools can help you in marking the ideal angles in addition to compound angles. Also, get an assortment of flat, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find that the Robertson format works best for many woodworking jobs and will be the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood documents. The expense of glue through all your jobs is a little cost consideration. Therefore, it is sensible to decide on the best. I also have discovered over the years that I get the best results with both indoor and outdoor projects when I use quality outside grade adhesive. These resin-based compounds unlike traditional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Furniture With Payment Plans

The peaceful satisfaction of woodworking is a wonderful adventure in this era of rushed lives, smartphones, and time-starved careers. With a minimum investment in the most basic tools and equipment, anyone can learn the rewarding abilities of his time-tested avocation and revel in job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Street furniture

Street furniture is a collective term (used in the United Kingdom,[1] Australia[2] and Canada[3][4]) for objects and pieces of equipment installed along streets and roads for various purposes. It includes benches, traffic barriers, bollards, post boxes, phone boxes, streetlamps, traffic lights, traffic signs, bus stops, tram stops, taxi stands, public lavatories, fountains, watering troughs, memorials, public sculptures, and waste receptacles. The design and placement of furniture takes into account aesthetics, visual identity, function, pedestrian mobility and road safety.

Benches are usually found in central parts of settlements, such as plazas and parks. They are often provided by the local councils or contributors to serve as a place to rest and admire views. Armrests in between are sometimes provided to discourage lying down and/or unwanted closeness.

Phone boxes or telephone booths are prominent in most cities. While they range drastically in the amount of cover they offer users (e.g. many only cover the phone itself while others provide full booths) they are typically easy to spot. The widespread use of mobile phones has resulted in a decrease in their numbers.

Video: Woodworking Projects