Furniture Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable thoughts and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and a few of those attributes along with a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking whenever they’re following because all the ideas and projects Ted’s source are easy to understand and simple. Ted McGrath spent two years exploring so he could collect enough material for an extensive package, and he ended up creating a really’complete’ woodworking source.

Many might still appear unsure whether they need to be buying Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it more difficult to make the right option. There are in fact many things that set Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit from Ted’s woodworking Package. People who are just getting started will find the ideas and projects in Ted’s bundle quite easy. No doubt, complicated carpentry is demanded; however, they will discover that it’s really easy to follow Ted’s simple step by step instructions. Currently, both novice and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource that will help beginners learn a lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers are going to be able to locate any project of their choice in this package quite readily, though there numerous choices.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and those who buy it will be backed by a 60-day warranty, so when this woodworking bundle fails to satisfy them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a marginally long period to down because of its large size. Yet, with a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nonetheless, they didn’t mind being overwhelmed considering the fact that this package is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking package made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that are available across the net. Ted has done his best to guide them in every conceivable way he could, through simple to comprehend textual instructions, clear images and even videos too.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find inside. Therefore, it is definitely worth buying!

Finding Woodworking Projects and Plans for Beginners Furniture Woodworking Plans

Woodworking is one hobby that could also be a rewarding profession if you like to work together with your hands and build beautiful pieces of furniture from timber. When you learn the woodworking crafts and eventually become a nice woodworking craftsman, you will have the ability to construct all types of furniture, (beds, table, and chairs), effortlessly. After that you can sell your completed woodworking projects and make a handsome profit. Furniture Woodworking Plans.

It requires time to become proficient in the craft of woodworking. The nice thing about working up to this expert craftsman degree is you’ll be able to build some really wonderful furniture to you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit in your living room. It will be a subject of conversation when you have friends come over to see. They’ll ask: How did you make it? Where did you get the woodworking programs? Just how long can it take to complete the job? What type of wood did you use? What type of tools did you use? How on earth did you make such a gorgeous piece of furniture? As you discuss your work, a sense of pride will encounter you and also don’t be surprised if your friends ask you to create one for them too!

Starting Your First Woodworking Shop Furniture Woodworking Plans

If you are thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it’s perfect for beginners!

Where to begin in Woodworking? Furniture Woodworking Plans.

Begin with an idea in mind of what you want to construct then get a really good woodworking project plan that’s geared toward novices. There are several little woodworking projects for novices available for sale from online woodworking retailers. Obviously, you can start out with as expansive a woodworking program as you choose. On the other hand, the chances are if you start out with a small woodworking job initially, you will have a better prospect of keyword completing the job.

Your woodworking project plan must include some lists! Length of: woodworking equipment, the quantity and type of wood required, and the essential hand tools and power tools to finish the undertaking. Note: A word of warning about purchasing woodworking tools. Only buy what you need to finish your immediate or upcoming endeavor. This is important especially if you are a beginner and just beginning. Tools aren’t cheap. The beginner needs good woodworking tools, but it is simple to break the bank purchasing a lot of tools you may not use all that frequently. If you do buy gear, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, finish punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking clamps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not overlook that the wood glue and a brush to spread the wood adhesive! Of course, you will need a dry place to work and may need a set of horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of substance and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more innovative hand tools and much more woodworking power tools here, but the concept is to buy the essential hand and power tools which novices will need. You can always add to your toolbox as you gain experience!

Furniture Woodworking Plans Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you have bought your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to finish your project. But if you are not certain about what to do there is help available! There are several areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of the several woodworking magazines available. Every month the writers in woodworking magazines do a story on how to improve your woodworking craft. Whether it is showing you the way you can apply a finish to a finished project, or how to make a mortise and tenon joint, something new could be heard each month. Next, is buying instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Furniture Woodworking Plans

If you are a beginner and very enthusiastic about doing a DIY project for house afterward, woodworking could be fun. If you don’t have the right information, instruction, and ability, you may wind up spending more money and time than you initially meant to spend. As a novice woodworker, you need to have time and the correct tools. Having said, there are a couple of essential factors that you should remember, before starting with any woodworking project.

1. If you’re just beginning, you must first have to be somewhat interested in woodworking. Creating something new with your own hands is a special sense. Don’t start a project if you’re not interested, as this may land you in a terrible location.

2. Consider the main reason for making this woodworking project. Choose the uses of the thing you’re making.

3. Consider your abilities and examine the time you have, before you start with a project.

4. Start jobs that you’re able to complete. If you are in the middle of a work, then it is better not to begin any project at all.

The Benefits of Woodworking Furniture Woodworking Plans

If you keep these essential points in your mind before you begin a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires preparation as much as it requires effort. So how do you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to choose the woodworking projects you wish to start with. As a newcomer, always select a project that has quite a basic construct up or a very simple structure. Some easy to begin projects comprise, bird feeder, chairs, shelves, etc.. The moment you get hold of the techniques, you could always move to the next level of woodworking projects, such as cupboards, sheds, and others. Beginning projects should keyword be complicated and less frustrating so that you have a better knowledge of working with woods and their tools. Once the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Furniture Woodworking Plans

Tools would be the means through which you will win the battle of woodworking. A lot of men and women believe power tools are needs. However, for beginners, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is the hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is required for exact cuts and dimensions. Even the workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer can make things considerably simple for you. When you buy a hammer, constantly assess the balance between the weight and stand. Always select a sturdy, yet lightweight item.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool helps you to cut forests at several sizes. There are various sorts of saws out there on the market. Choose a size which you could handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian types and standard flat kind. Possessing all of them can help you ahead of time woodworking. You might even buy keyword energy screwdrivers since they make the work much faster.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape helps you to quantify wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you demand a wrench. Nonetheless, this isn’t a tool for beginners, but having it might make work simpler for you at a subsequent stage.

7. Drill – Drill makes it possible to create holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the job much simple.

8. Additional small and fundamental tools – These include pencils, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s not any fixed price on woodworking projects. Based on the sort of job you want to complete, pricing can be set. The simple the project, the less cost it involves. However, at the very beginning buying the tools will probably be a little hefty. Because of this, it’s better to fix a budget first on the tools, then keyword on the undertaking. Buying the fundamental tools will make certain you don’t have to buy any more material other than the timber ply.

Time and Instructions

Instructions are among the principal things that each and every beginner should follow. Instructions manual is quite simple to comprehend the procedure, what to do and how to do it. It keyword is a systematic manual for completing the job. Time also plays a significant role in the construction of woodworking projects. Woodworking projects require time and so it is crucial for a novice to have ample amount of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that will make the work easy. Nevertheless, the most essential thing keyword that will allow you to reach success is proper planning. With appropriate planning and a strategy, it is likely to achieve success quickly. If you understand the objective of woodworking, then the item that you want to construct, the resources you need in order to possess and the average time you can give daily; then you are ready to go.

Conclusion, Furniture Woodworking Plans

All these tips and instruction is likely to create the woodworking projects and plans for novices fast to complete. Always make sure that you have all of the vital tools, materials, area ready. Read the instructions for building an item handy. Proper strategy and planning can help you to make a great woodworking job for your property.

|

The Benefits of Woodworking Furniture Woodworking Plans

People if you’re trying to find a way to pass time or desire an alternative method to generate money they usually turn to a hobby they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based company. It’s very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of projects one can think of. When starting out you need to be very cautious when choosing which job to start out with because there are jobs that may be too tough for a beginner. But don’t worry about that since we are going to give you tips on the right means to start woodworking as a beginner.

Just like any other hobby woodworking requires some working equipment, so before you pick your job you have to be aware of if you have the available resources to work on that job. Try not to spend a good deal of money on purchasing equipment when starting out, purchase more equipment as you gain more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no difference between the artistic hand as well as the normal hands.

Woodwork Crafts – The Beginners Guide To Woodworking Furniture Woodworking Plans

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking at home will give you time to explore unique projects and find out so many things. That’s why it’s very important to spend less money when starting out so that you can afford to make mistakes and at any time learning about various jobs.
It is very important you know more about different kinds of wood available for creating jobs. Expect carpenters utilize different kinds of wood quality for decorating bits, learning what kind of wood that they use will allow you to prepare the wood you will need for certain projects you might choose to pursue.
As soon as you understand the fundamentals of wood selection and the use of different tools now you can employ them in cutting well wood pieces and placing wood together. Knowing what to do can help you in building good projects to fulfill your needs.

Furniture Woodworking Plans practice makes perfect so be sure that you practice your work daily if at all possible. Try out lots of layouts utilizing various tools so that you can find the hang of using the tools. When starting out you may earn a number of mistakes but with time you will learn how to properly utilize them and create quality projects.

|

The Benefits of Woodworking Furniture Woodworking Plans

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever enjoy. You may begin on a shoestring with a minimum amount of gear and equipment. A small home workshop may produce a broad array of simple projects that can allow you to develop your creative and building abilities while rewarding you with artistic and practical wood products that you are able to appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let’s talk about where you’ll perform your woodworking, based on the size of your home, you might have the ability to create a dedicated space into your woodworking activities. This might be a reserved spot on your garage or on your cellar. In some cases, a detached shed or outbuilding might be perfect to set up your very first store. A heated shop detached from your home offers one distinct advantage: better dust control. Without complex dust control methods, basement assignments will inevitably produce dust which travels to the living area of your house. This is very true in homes with forced air heating systems where cold air yields found in the cellar draw dust up into the upper levels of the home. Another benefit of detached workshops is, of course, the sound level. You can work without bothering the rest of the family. A good compromise might be the garage of your property.

This can help minimize the problems of dust and noise, however based on where you reside, a keyword garage layout might not be practical during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Furniture Woodworking Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they add more space to work in. Furniture Woodworking Plans if you can have a dedicated spot for a marathon all the greater. Floor tools and bench top equipment can remain in place from project to project. If this installation is not impossible, at least try to create a bench area where equipment could be saved and pulled out as needed. If possible plan for inevitable expansion as you acquire more tools and equipment. In the start, establish a bench area where you are able to store and use most of your gear, using a temporary expansion of your activities onto the basement or garage floor.

A basic workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. This will enable you to work comfortably while standing. Insert a sturdy shelf beneath the bench to house your hand power tools along with a pegboard over the bench to hang other gear. Put in a woodworking at one end of the bench on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Furniture Woodworking Plans

The scope of your start-up equipment will be largely based on your financial plan. Whether you’ve got large financial resources or you are starting on a shoestring always buy quality gear. If you can afford it, purchase your quality tools at the local construction and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or alternative regional ads. You will find an abundance of quality lightly used programs out there which belong to individuals who embarked on that one molding project around the home or obtained tools as gifts that they will never utilize. You can usually buy tools for these sellers for under half of the original price and save even more money if you make a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will take extra time and perhaps travel expenses. Weigh out the advantages of traveling around town to save a couple extra dollars on a cheap piece of equipment. The excess expense of time and travel in these scenarios is usually justified when buying large ticket items like table saws, bandsaws or high ended tools like surface planers in the future.
For smaller acquisitions, a visit to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimum amount of hand equipment yet generated sophisticated and complex bits. Concentrate on developing your abilities with your startup set of resources and prevent lamenting about the equipment you wished you’d.
Here’s a checklist of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Buy a quality acrylic set that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually impair your vision and influence safety. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You can avoid wearing them all together in the event that you find them uncomfortable.

The next bit of critical safety equipment that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking may be long-term and noisy exposure to those sound levels can affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most workers tire quicker when subjected to high sound levels. Last, put on a cap to keep the dust from your hair. With this setup I am shielding my eyes and my ears. I am keeping the dust out of my hair. I am all set!

Power Hand Saw: Frequently known as a skill saw after the favorite name, this can end up being the most versatile tool in a start-up workshop. In reality, in the hands of a professional, a power hand saw can be used to construct an entire property. As mentioned earlier get an excellent manufacturer saw. Avoid cheap unknown brands. All these are inclined to cut back and will burn out before you even start your next job. After choosing the proper saw install an excellent blade. Most skill saws come with a starter blade of lower quality even if they’re a fantastic saw. Keep this blade as a backup and put in an excellent blade with carbide teeth. Begin with a hybrid . These have a balanced enamel count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool can’t only cut curves. It’s ideal for cutting holes in wood too like handle slots. Eventually, you’re going to want to get a band saw. Bandsaws are much more versatile but a quality floor unit can be expensive. A jigsaw can be a good stop gap to the novice woodworker.

Purchase an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss within the conventional 3/8 inch version. Down the road, the 1/2 inch version will end up being versatile. Through tough lessons learned, I have discovered that purchasing quality, in this scenario, is much more crucial than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t want on your workshop. Buy an range of quality carbide tipped drill bits that are kept in a holder labeling each drill bit size. Create a habit of returning each drill piece to its potential slot at the holder after every use. Lastly, get a pair of hard steel driver bits. Your drill can also be a versatile screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer stays as the most versatile instrument in the store, and frequently the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop injuries occur. Although the most frequent, hammer accidents are usually of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the handle and head. The head typically comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce range for overall work and a smaller finishing hammer for more complex work. Avoid using big framing hammers in the workshop and any with dimpled head tips. These kinds of hammers are more suited for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage pretty much any sanding requirements you have as a beginner woodworker. As your woodworking skills evolve, you’ll probably update to a floor model disc and belt sander. However, for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited quantities of surface area. As you embark on your first few projects you’ll find that your palm sander using a bit of effort can transform rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and form rough planks using 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets with an excess supply of 100 grit paper. You’ll find that this grade of paper the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Although low tech in theory, these tools enable you to taper borders, flatten high spots and correct any imperfections in wood pieces. {Begin with a typical number 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, good clamps are costly and it usually requires the beginner woodworker a couple of years to accumulate a detailed set of wood clamps. Start with a set of extended”pipe” clamps. Now the pipe has been replaced with extended steel shafts, but the structure remains the same. Get a set of the longest clamps that you can afford. You can contact them for smaller glue jobs and enlarge them to their full length for larger projects.

Shop Vice: A store vice installed at the end of the seat is ideal for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices with their wood clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer rapid release mechanisms that enabled the consumer to quickly open and close the jaws with no tedious handle turning. The wood clamping surfaces in your vice will occasionally need replacement. I prefer to utilize soft walnut in my vices that will not crush or damage many of the various forests that I utilize. Whether I am working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be one of the most frequently used tools. Purchase a good quality name brand tape measure with a broad tape typically in the 25-foot selection. Although in your shop you might not be using the tape in these spans, the larger tape steps provide more rigid tapes that will not flop around and slip off the end of boards. Measuring when you’re on your own will be a lot easier, and naturally, quality tape measures can last for several decades.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will need additional sanding.

What is Woodworking? The Benefits of Woodworking Furniture Woodworking Plans

Woodworking is known as the construction or the production of items from wood. You can produce a lot of different objects from woodworking and these items can be as large as gazebos or as little as wooden toys. However large or small your private project maybe you’ll be quite likely to do that aim with woodworking. In addition, woodworking has lots of private in addition to emotional benefits! In this guide, I will briefly identify some of the benefits for youpersonally.

Woodworking as a Career:

People who build things from wood are usually known keyword as carpenters. Carpenters can work on a number of woodworking projects and job types. For instance, some carpenters possess their carpentry company and these folks have the luxury to set their work hours. This benefit enables carpenters the chance to spend additional time with their families and have less job stress. Raising children is a very difficult task no matter what way you approach the endeavor! To get a carpenter who owns their own business, this job might not be hard because that individual will have more time to be a part of his or her child’s lifetime. By playing a larger role in the life span of your child you’ll be having a larger influence on the type of character that child develops into, which is a huge concern for any loving parent. Besides these advantages, carpentry can also have health benefits too.

Woodwork Crafts – The Beginners Guide To Woodworking Furniture Woodworking Plans

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood around a lot. This causes more physical activity, which results in better physical health. Maintaining your body physically healthy is vital and keyword will help prevent the incidence of various ailments later on in life. By being physically healthy you can reduce chances you will have a heart attack, have seizures, turned into a diabetic, and reduce the odds of having a range of other disorders.

Furniture Woodworking Plans, Do It Yourself Woodworking Saves Cash:

I always feel like that I paid way too much when I visit home improvement stores and purchase patio furniture, and I am certain that I’m not the only person that has felt like this! A successful business owner once advised me to constantly raise the sales price of a commodity to double everything you’ve got it for. This way, you can always reduce the merchandise to 50 percent away and still come out without getting any losses. This sounds like it may be the same tactic that home improvement stores use in selling their wooden furniture solutions. Regardless, there’s a way that it is possible to get around paying the additional money and that’s to do with building it yourself. Luckily, there are some really excellent woodworking products that offer thousands of detailed woodworking keyword plans for countless different project types. Thus, you really can build whatever you want or see in almost any home improvement store. Doing something does take a little bit of time but the time is well spent when you wind up saving hundreds of dollars as a result of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Projects