Gambrel Storage Shed Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and a few of those qualities alongside a few petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an educator and a part of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking when they’re after because all the ideas and projects Ted’s resource are simple to comprehend and easy. Ted McGrath spent two years researching so he could collect enough material for an extensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many might still appear unsure if they need to be buying Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it more difficult to make the ideal choice. There are actually many things that place Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit from Ted’s woodworking Package. People that are just getting started will find the ideas and jobs in Ted’s bundle quite easy. No doubt, intricate carpentry is involved; however, they will discover that it’s really simple to follow Ted’s simple step-by-step instructions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who purchase his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which helps beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers are going to have the ability to find any job of their choice within this package quite easily, though there numerous choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who purchase it will be endorsed by a 60-day warranty, so when this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large dimensions. Yet, using a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

As there are several ideas, plans and projects in Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overrun considering the fact that this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking package is so thorough and vast that it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking package created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that can be found throughout the net. Ted has done his best to direct them in every possible way he could, through simple to understand textual instructions, clear images and even videos as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find inside. So, it is certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more innovative hand tools and much more woodworking power tools here, but the concept is to purchase the essential hand and power tools which novices will need. You can always increase your toolbox as you get experience!

Gambrel Storage Shed Plans Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you’ve purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. But if you are not certain about what to do there is help available! There are lots of areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of those many woodworking magazines out there. Every month the writers in woodworking magazines do a story on how to improve your woodworking craft. When it is showing you the way to apply an end to a finished job, or how to create a mortise and tenon joint, something new could be learned each month. Next, is buying instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to use a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Starting Your First Woodworking Shop Gambrel Storage Shed Plans

If you’re a beginner and very enthusiastic about doing a DIY project for home afterward, woodworking can be fun. If you don’t have the right information, instruction, and skill, you may wind up spending more money and time than you initially intended to spend. As a novice woodworker, you need to have time and the appropriate tools. Having said, there are a couple of essential aspects you need to keep in mind, before starting with any woodworking project.

1. If you’re a beginner, you should first need to be somewhat interested in woodworking. Making something new with your own hands is a particular feeling. Don’t begin a job if you are not interested, because this might land you in a terrible location.

2. Consider the main reason behind creating this woodworking project. Decide on the uses of the item you are making.

3. Consider your skills and analyze the time you have, until you begin with a job.

4. Start jobs which you’re able to complete. If you’re in the midst of a work, then it’s better not to begin any project at all.

The Benefits of Woodworking Gambrel Storage Shed Plans

If you keep those vital things in mind before you begin a woodworking project, it will become very simple for you to achieve success. Woodwork requires preparation as much because it takes effort. So how do you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to choose the woodworking projects you want to start with. As a newcomer, always select a project that has a very basic build up or a simple construction. Some simple to start projects comprise, bird feeder, benches, shelves, etc.. The moment you find these techniques, you could always move into the next level of woodworking projects, such as cupboards, sheds, along with others. Beginning projects should always keyword be complicated and less frustrating so that you have a better knowledge of working with forests and their tools. When the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Gambrel Storage Shed Plans

Tools are the ways whereby you can win the battle of woodworking. Many men and women believe power tools are requires. However, for beginners, basic hand tools can be very handy and more than useful in completing a project. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for exact cuts and measurements. The workbench, when mended with vises, offer ample space to operate. As a primary tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things considerably simple for you. When you buy a hammer, always assess the equilibrium between the weight and endure. Always pick a hardy, yet lightweight product.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool can help you to cut forests at different sizes. There are different types of saws out there in the marketplace. Decide on a size that you can handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Possessing all of them will help you ahead of time woodworking. You can even purchase keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape gives you the capacity to quantify wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. However, this isn’t a tool for beginners, but using it would make work simpler for you in a subsequent stage.

7. Drill – Drill makes it possible to create holes in timber. Low wattage power drills can make the job much simple.

8. Other small and basic tools – These include pens, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed price on woodworking projects. Dependent on the type of job you want to finish, pricing can be set. The easy the job, the less price it involves. But at the very beginning buying the tools will be a little hefty. Because of this, it is much better to resolve a budget first on the tools, then keyword on the project. Buying the fundamental tools will ensure that you do not need to purchase any more material other than the wood ply.

Time and Instructions

Directions are one of the principal things that each and every newcomer should follow. It is like the woodworking Bible. Instructions guide is quite easy to comprehend the procedure, what to do and the way to do it. It keyword is a systematic manual for finishing the job. Time also plays a significant role in the construction of woodworking projects. Woodworking projects demand time and so it’s crucial for a beginner to have ample quantity of time every week.

Ideas for Beginners

There aren’t any quick tips or suggestions that will make the work easy. Nevertheless, the most essential thing keyword which will allow you to reach success is proper preparation. With appropriate planning and a strategy, it is possible to achieve success quickly. If you understand the objective of woodworking, then the item you want to build, the tools you require to own and the typical time you can devote every day; then you’re ready to go.

Conclusion, Gambrel Storage Shed Plans

All these strategies and instruction will make the woodworking projects and plans for beginners quickly to finish. Always ensure that you have all of the essential tools, materials, space ready. Keep the instructions for building an item handy. Appropriate strategy and planning can help you to make a great woodworking project for your home.

|

Starting Your First Woodworking Shop Gambrel Storage Shed Plans

People if you’re trying to find a way to pass time or desire an alternative method to generate money they usually turn to a hobby that they enjoy. It is very exciting to do and everyone can begin.

When doing woodworking in your home there are lots of jobs one can think of. When starting out you have to be very cautious when choosing which job to start out with since you will find projects that can be too tough for a newbie. But don’t worry about that because we are going to give you guidelines on the ideal means to start woodworking as a beginner.

The same as any other hobby woodworking requires some working gear, so before you choose your job you need to know whether you’ve got the available tools to work on such a job. Try not to spend a lot of money on purchasing gear when starting out, buy more equipment as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there will not be any difference between the hand as well as the hands.

The Benefits of Woodworking Gambrel Storage Shed Plans

Woodworking at home will provide you time to explore different projects and find out so many things. That is why it’s important to spend less money when starting out so that you can afford to make errors and at some time learning about various jobs.
It is extremely important you know more about different kinds of wood available for making jobs. Anticipate carpenters utilize different types of wood quality for decorating bits, learning which kind of wood they use can help you prepare the wood you will need for specific projects you might want to pursue.
As soon as you know the fundamentals of wood selection and the use of different tools now you can implement them in cutting well wood pieces and putting wood together. Knowing what to do will help you in building good projects to fulfill your needs.

Gambrel Storage Shed Plans practice makes perfect so make sure you practice your work every day if at all possible. Try out a lot of designs utilizing various tools so that you can find the hang of working with the tools. When starting out you can earn a range of errors but with time you will learn how to properly utilize them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Gambrel Storage Shed Plans

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You may begin on a shoestring with a minimum number of tools and equipment. A small home workshop may generate a broad variety of simple projects which can allow you to develop your creative and building skills while rewarding you with practical and artistic wood products which you can enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us talk about where you will do your woodworking, based on the dimensions of your home, you might have the ability to produce a dedicated space to your woodworking activities. This may be a reserved spot in your garage or in your cellar. In some cases, a detached shed or outbuilding might be perfect to set up your first store. A heated store detached from your house offers one distinct advantage: better pest management. Without sophisticated dust control methods, basement workshops will inevitably produce dust that travels into the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns found in the basement draw dust up into the top levels of the home. Another benefit of detached workshops would be, clearly, the sound level. It’s possible to work without disturbing the rest of the household. A good compromise could be the garage of your home.

This might help decrease the difficulties of dust and sound, however based on where you live, a keyword garage workshop may not be sensible during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Gambrel Storage Shed Plans

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they include more space to function in. Gambrel Storage Shed Plans if you can have a dedicated spot for a workshop all the better. Floor gear and bench top gear can stay in place from project to project. If this setup is not impossible, at least attempt to create a bench area where equipment can be saved and pulled out as needed. If possible plan for inevitable growth as you get more tools and equipment. At the beginning, set up a bench area where you are able to shop and use the majority of your equipment, using a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. That will enable you to work comfortably while standing. Add a sturdy shelf below the bench to home your hand power tools and a pegboard above the seat to hang other equipment. Put in a woodworking at one end of the seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Gambrel Storage Shed Plans

The scope of your startup equipment will be mostly based on your budget. Whether you have got big financial resources or you are starting on a shoestring consistently purchase quality equipment. If you can afford it, purchase your quality tools in the regional building and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or other regional advertisements. You will find plenty of quality gently used tools out there that belong to individuals who stumbled on that one molding project around the home or obtained tools as gifts that they will never utilize. You can usually buy tools for all these sellers for under half of the initial price and save even more money should you create a bundle deal for all their unused equipment. Obviously, acquiring tools from private individuals will require extra time and perhaps travel expenditures. Weigh out the advantages of traveling across town to save a couple added dollars on a cheap piece of gear. The extra expense of time and travel in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or high finished tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal quantity of hand equipment yet generated sophisticated and intricate bits. Concentrate on developing your abilities with your start-up set of resources and avoid lamenting about the gear you wished you had.
Here is a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Buy a quality acrylic collection that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually impair your vision and affect security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up quickly. You can avoid wearing all of them together if you find them uncomfortable.

The next piece of crucial safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking can be long-term and noisy exposure to these sound levels can affect hearing and lead to tinnitus and other hearing losses. With this set up I’m shielding my eyes and my ears. I am keeping the dust out of my hair. I am all set!

Power Hand Saw: Often referred to as a skill saw after the favorite brand name, this can end up being the most flexible instrument in a start-up workshop. In reality, at the hands of an expert, a power hand saw could be employed to construct an entire property. Eventually, you are going to want to buy a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to perform cross cuts, rip cuts and even elaborate angle cuts. As mentioned earlier get a quality brand saw. Avoid cheap unknown brands. These tend to cut inaccurately and will burn out before you even start your next job. After choosing the right saw put in an excellent blade. Most skill saws come with a starter blade of lower quality even if they are a fantastic saw. Keep this blade for a backup and install a quality blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will add great flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t just cut corners. It’s ideal for cutting holes in wood also like manage slots. Eventually, you’ll want to get a ring saw. Bandsaws are much more versatile but a excellent floor unit can be expensive. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the standard 3/8 inch model. Through tough lessons learned, I have discovered that purchasing quality, in this case, is much more critical than ever. Cheaper drills tend to have very short run times and need to be recharged frequently. Their battery life will be poor and to make things worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t need on your workshop. Purchase an range of quality carbide tipped drill bits which are kept in a holder tagging each drill bit size. Make a habit of returning each drill bit to its potential slot in the holder after every use. Lastly, get a pair of tough steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer remains as the most versatile instrument in the store, and frequently the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries happen. Although the most ordinary, hammer accidents are usually of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The head usually comes loose and the tool becomes useless. Pick a title brand quality hammer at the 16-ounce scope for general work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more appropriate for rough framing tasks and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can manage pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking skills evolve, you’ll likely update to a floor version disc and belt sander. But for the time being, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited quantities of surface area. As you embark on the first few projects you’ll find your palm sander with a little bit of effort can transform rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and shape rough boards using 100 grit paper and later finish your work with 200 or 300 grit paper. Buy an range of sandpaper sheets with an excess supply of 100 grit paper. You’ll find this caliber of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Though low tech in theory, these tools enable you to taper edges, flatten high spots and fix any imperfections in wood bits. {Begin with a standard number 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, superior clamps are costly and it normally takes the novice woodworker a couple of years to collect a comprehensive set of timber clamps. Begin with a set of long”pipe” clamps. Now the pipe has been replaced with extended steel shafts, but the structure is still the same. Receive a set of the maximum clamps that you can spend. You can get in touch with them for smaller glue jobs and enlarge them to their full length for bigger projects.

Shop Vice: A shop vice installed in the end of the bench is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer rapid release mechanisms that enable the user to rapidly open and close the limbs with no tedious handle rotation. The timber clamping surfaces in your vice will occasionally require replacement. I would rather use soft pine in my vices that won’t crush or damage lots of the various forests that I work with. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be one of your most often used tools. Buy a fantastic quality name brand tape measure with a broad tape typically in the 25-foot range. Although in your shop you might not use the tape at these spans, the bigger tape measures offer more rigid tapes that won’t flop around and slide off the end of boards. Assessing when you’re on your own will be a great deal simpler, and naturally, quality tape measures can last for several years.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the timber. Avoid oversized carpenter’s pencils. Their big flat leads are just too coarse for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools can assist you in marking the ideal angles as well as chemical angles. Get the number three and two Robertson set. I find the Robertson format works best for most woodworking projects and is the most compatible with a drill powered pieces. Last, get a set of 12-inch wood documents. The expense of adhesive through all of your jobs is a minor cost consideration. Therefore, it is sensible to decide on the best. I also have discovered over the years that I get the best results with both indoor and outdoor projects when I use quality outdoor grade adhesive. All these resin-based compounds unlike conventional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, Gambrel Storage Shed Plans

The peaceful gratification of woodworking is an excellent experience in this era of rushed lives, smartphones, and time-starved careers. With a minimum investment in the most basic tools and equipment, anyone can learn the rewarding skills of his time-tested hobby and enjoy job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Shed

A shed is typically a simple, single-story roofed structure in a back garden or on an allotment that is used for storage, hobbies, or as a workshop. Sheds vary considerably in their size and complexity of construction, from simple open-sided ones designed to cover bicycles or garden items to large wood-framed structures with shingled roofs, windows, and electrical outlets. Sheds used on farms or in industry can be large structures. The main types of shed construction are metal sheathing over a metal frame, plastic sheathing and frame, all-wood construction (the roof may be asphalt shingled or sheathed in tin), and vinyl-sided sheds built over a wooden frame. Small sheds may include a wooden or plastic floor, while more permanent ones may be built on a concrete pad or foundation. Sheds may be lockable to deter theft or entry by children, domestic animals, wildlife, etc.

A culture of shed enthusiasts exists in several countries for people who enjoy building sheds and spending time in them for relaxation. In Australia and New Zealand there are magazines called The Shed, an association for shed hobbyists (the Australian Men's Shed Association), and a book entitled Men and Sheds.

Depending on the region and type of use, a shed may also be called a shack, outhouse, or "outbuilding". Sheds may be classified as "accessory buildings" in municipal bylaws which may regulate their size, appearance, and distance from the principal building and boundary lines.

Video: Woodworking Tools