Garden Shed Building Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable thoughts and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities along with a few petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, she’s also an educator and a member of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking whenever they’re following because all the thoughts and jobs Ted’s resource are simple to understand and easy. Ted McGrath spent two years exploring so that he could gather enough material for an extensive bundle, and he ended up making a really’complete’ woodworking resource.

Many might still appear unsure if they need to be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more challenging to make the right option. There are in fact lots of things that set Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to profit out of Ted’s woodworking Package. Those that are only getting started will discover the thoughts and jobs in Ted’s bundle quite simple. No doubt, complicated carpentry is involved; however, they will find it really simple to follow Ted’s simple step-by-step instructions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who purchase his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which will help beginners learn a whole lot about woodworking. They’ll also be able to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will be able to find any project of their choice within this bundle quite easily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

In general, this product is and people who purchase it’ll be backed by a 60-day warranty, so when this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long period to down because of its large size. Yet, using a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nevertheless, they didn’t mind being overrun considering the fact that this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so comprehensive and vast that it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that are available throughout the internet. Ted has done his best to guide them in every conceivable way he could, through simple to comprehend textual directions, clear pictures and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking projects they will find inside. Therefore, it is definitely worth buying!

The Benefits of Woodworking Garden Shed Building Plans

Woodworking is one hobby that could also be a rewarding profession if you love to work with your hands and construct beautiful pieces of furniture from wood. When you learn that the woodworking crafts and become a fine woodworking craftsman, you’ll be able to construct all types of furniture, (beds, table, and chairs), with ease. After that you can sell your finished woodworking jobs and make a handsome profit. Garden Shed Building Plans.

It requires time to become proficient in the craft of woodworking. The nice thing about working up to that expert craftsman level is you’ll be able to build some really nice furniture to you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit on your living room. It will be a subject of conversation whenever you have friends come over to visit. They will ask: How can you make it? Where did you get the woodworking programs? How long did it take to complete the job? What type of tools did you use? Just how on earth did you make such a beautiful piece of furniture? As you discuss your job, a sense of pride will come over you and don’t be surprised if your friends ask you to create one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Garden Shed Building Plans

If you are thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to Begin in Woodworking? Garden Shed Building Plans.

Start with a concept in mind of what you would like to construct then get a really good woodworking project plan that is geared toward novices. There are several little woodworking projects for novices available for sale from online woodworking retailers. A couple of woodworking program suggestions for you thinking really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid simply to mention a few. Of course, you can start out with as expansive a woodworking program as you pick. However, the odds are if you begin with a little woodworking job initially, you will have a better chance of keyword finishing the job.

Your woodworking project plan must incorporate some lists! Lists of: woodworking equipment, the amount and type of wood required, and the required hand tools and power tools to complete the undertaking. Note: A word of warning about buying woodworking tools. Only buy what you need to finish your instant or upcoming endeavor. This is important especially if you’re a beginner and just beginning. Tools are not affordable. The newcomer needs good woodworking gear, but you can easily break the bank purchasing a lot of tools you may not use all that often. When you do buy gear, buy quality. Do a bit of research and compare goods. Buy the best that you can afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, finish punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking straps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and do not forget that the wood glue and a brush to spread the wood adhesive! Obviously, you’ll need a dry place to work and might need a set of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more innovative hand tools and much more woodworking power tools here, but the idea is to buy the crucial hand and power tools which novices will need. You may always increase your arsenal as you gain experience!

Garden Shed Building Plans Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you’ve purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and techniques to complete your project. But if you’re unsure about what to do there is help available! There are lots of places that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the many woodworking magazines available. Each month the writers in woodworking magazines do a story on the best way best to increase your woodworking craft. When it is showing you the way to apply an end to a finished project, or how to make a mortise and tenon joint, something new could be learned every month. Next, is buying instructional DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to work with a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Garden Shed Building Plans

If you are a beginner and very enthusiastic about doing a DIY job for home afterward, woodworking could be fun. If you do not have the proper information, education, and ability, you might wind up spending more time and money than you initially intended to spend. As a beginner woodworker, you want to have time and the correct tools. Having mentioned, there are a few essential factors that you should keep in mind, before starting with any woodworking project.

1. If you are just beginning, you must first have to be somewhat interested in woodworking. Making something new with your hands is a special feeling. Do not begin a job if you’re not interested, as this may land you in a bad place.

2. Think of the main reason for making this woodworking project. Choose the uses of this thing you are making.

3. Consider your skills and analyze the time that you have, until you begin with a project.

4. Start jobs which you can finish. If you are in the midst of a work, then it is better to not begin any project at all.

Finding Woodworking Projects and Plans for Beginners Garden Shed Building Plans

If you maintain these vital points in mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much as it takes effort. So how can you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to opt for the woodworking projects that you want to start with. As a newcomer, always select a job which has a very basic construct up or a very simple structure. A few easy to begin projects comprise, bird feeder, benches, shelves, etc.. The moment you get hold of these techniques, you can always move into the next level of woodworking jobs, such as cabinets, sheds, along with others. Beginning jobs should keyword be complicated and less bothersome so that you have a better knowledge of working with forests and their tools. Once the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Garden Shed Building Plans

Tools are the ways through which you will win the struggle of woodworking. A lot of men and women believe power tools are requires. However, for novices, basic hand tools can be very convenient and more than useful in completing a job. If woodworking is the hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for exact cuts and dimensions. Even the workbench, when mended with vises, offer ample space to work. As a primary tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer will make matters much easy for you. When you purchase a hammer, always assess the equilibrium between the weight and stand. Always select a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are different types of saws out there on the market. Choose a size that you could handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them will help you in advance woodworking. You can even buy keyword power screwdrivers since they make the job much faster.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape gives you the capacity to quantify wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you demand a wrench. Nonetheless, this isn’t a tool for beginners, but having it might make work simpler for you at a later stage.

7. Drill – Drill helps you create holes in wood. Low wattage power drills will make the task much simple.

8. Additional small and basic tools – These include pens, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is not any fixed price on woodworking jobs. Dependent on the sort of job that you want to finish, pricing can be determined. The easy the project, the less cost it involves. However, at the very beginning buying the tools will be somewhat hefty. Therefore, it is much better to fix a budget first on the tools, then keyword on the project. Purchasing the basic tools will ensure that you do not need to purchase any more material aside from the timber ply.

Time and Directions

Directions are among the primary things which each and every beginner should follow. Instructions manual is very simple to comprehend the procedure, what to do and how to get it done. Time also has an important part in the building of woodworking projects. Woodworking projects require time and therefore it is crucial for a beginner to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. Nevertheless, the most essential thing keyword which can allow you to achieve success is proper preparation. With proper planning and a plan, it’s likely to achieve success quickly. If you know the objective of woodworking, then the thing you need to construct, the resources you require in order to possess and the typical time you can give daily; then you are ready to go.

Conclusion, Garden Shed Building Plans

All these strategies and education will make the woodworking projects and strategies for novices quickly to finish. Always make sure that you have all the vital tools, materials, space prepared. Read the instructions for constructing a product handy. Appropriate strategy and planning can help you to earn a fantastic woodworking project for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Garden Shed Building Plans

Folks when trying to find a way to pass time or want an alternate method to make money they generally turn to a hobby they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you need to be very careful when choosing which job to begin with since there are projects which can be too tough for a newbie. But don’t be concerned about that since we are going to provide you guidelines on the right way to begin woodworking as a beginner.

Just like any other hobby woodworking demands some working gear, therefore before you choose your job you have to be aware of if you’ve got the available tools to work on that project. Try not to spend a good deal of cash on purchasing equipment when starting out, buy more gear as you gain more experience and become a professional carpenter. If you enjoy your hobby then there’ll not be any difference between the hand and the hands.

Starting Your First Woodworking Shop Garden Shed Building Plans

Woodworking at home will give you time to explore unique projects and learn a lot of things. That is why it’s important to invest less money when starting out so that you can manage to make mistakes and at any time learning about various projects.
It’s very important that you know about different kinds of wood available for making projects. Anticipate carpenters utilize several kinds of wood quality for decorating pieces, learning which kind of wood that they use will help you prepare the wood you’ll need for specific jobs you may want to pursue.
Once you understand the fundamentals of wood selection and the use of different tools you can now implement them in cutting well wood pieces and placing wood together. Knowing what to do will assist you in creating good projects to satisfy your needs.

Garden Shed Building Plans practice makes perfect so be sure you practice your work every day if possible. Try out a lot of layouts utilizing a variety of tools so that you may find the hang of using the tools. When starting out you may make a number of mistakes but with time you will learn how to properly utilize them and produce quality projects.

|

Starting Your First Woodworking Shop Garden Shed Building Plans

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimal amount of gear and equipment. A little home workshop can produce a broad variety of simple projects that can help you develop your creative and building skills while rewarding you with artistic and practical wood products that you are able to appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let’s talk about where you’ll perform your woodworking, based on the size of your house, you may be able to create a dedicated space into your woodworking activities. This may be a reserved place in your garage or on your cellar. Sometimes, a detached shed or outbuilding may be perfect to prepare your very first shop. A heated store detached from your house provides one distinct advantage: better pest management. Without sophisticated dust control methods, basement workshops will inevitably create dust which travels to the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns located in the basement draw up dust into the top levels of the house. Another advantage of detached workshops is, of course, the noise level. You can work without disturbing the remainder of the family. A good compromise might be the garage of your home.

This might help minimize the difficulties of dust and sound, however based on where you live, a keyword garage workshop may not be practical during extremes of hot or cold weather.

Starting Your First Woodworking Shop Garden Shed Building Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes that they add more space to function in. Garden Shed Building Plans if you’re able to have a dedicated spot for a workshop all the better. Floor tools and bench top gear can remain in position from project to project. If this installation isn’t hopeless, at least attempt to make a chair area where equipment can be stored and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and gear. In the start, set up a bench area where you are able to shop and use most of your gear, with a temporary expansion of your activities onto the garage or basement floor.

A basic workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. Add a sturdy shelf below the seat to house your hands power tools and a pegboard above the seat to hang additional gear. Install a woodworking vice at one end of your seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Garden Shed Building Plans

The scope of your start-up equipment will be mostly based on your budget. Whether you’ve got large financial resources or you are starting on a shoestring consistently purchase quality gear. If you can afford it, then buy your quality tools at the local building and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or other regional ads. There are plenty of quality gently used tools out there which belong to people who embarked on that one molding job around the home or received tools as gifts which they won’t ever utilize. You can usually purchase tools for all these sellers for less than half of the original price and save even more money should you make a package deal for all their unused equipment. Obviously, acquiring tools from private people will take additional time and perhaps travel expenses. Weigh the advantages of traveling across town to save a couple extra dollars on a inexpensive piece of gear. The extra cost of time and travel in these scenarios is usually justified when buying large ticket items like table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a visit to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal amount of hand gear yet generated sophisticated and intricate bits. Focus on developing your abilities with your start-up set of resources and avoid lamenting about the gear you wished you had.
Here is a listing of the useful tools You Will Need to get started:
Safety Gear: Start as anticipated with eye protection. Get a nice pair of safety glasses which also offer you some side protection to your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually impair your vision and affect safety. Avoid wearing gloves at a workshop. Most impair eyesight and dust up fast. You may avoid wearing them all together in the event that you find them uneasy.

The next piece of critical safety equipment that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking can be long-term and noisy exposure to these sound levels can affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most employees tire faster when exposed to high sound levels. These can contain earplugs or full ear keyword muff protectors. I find that a excellent pair of ear muff protectors is ideal for hearing protection.

Lastly, put on a cap to keep the dust out of your hair. With this setup I am shielding my eyes and my ears. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Frequently known as a skill saw following the favorite brand name, this can prove to be the most versatile instrument in a startup workshop. In reality, in the hands of a professional, a power hand saw can be used to construct an entire property. Eventually, you are going to want to buy a table saw, but for now, a power hand saw for the woodworker on a funding empowers him to do cross cuts, tear cuts and even elaborate angle cuts. As mentioned earlier get an excellent brand saw. Stay away from cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your next project. After selecting the right saw put in an excellent blade. Most skill saws include a starter blade of lower quality even if they’re a fantastic saw. Keep this blade as a backup and install a quality blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will include excellent versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool cannot only cut curves. It’s perfect for cutting holes in timber too like manage slots. At some point, you’ll want to get a band saw. Bandsaws are even more flexible but a excellent floor unit can be costly. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the conventional 3/8 inch model. Down the road, the 1/2 inch version will end up being more versatile. Through hard lessons learned, I have discovered that buying quality, in this scenario, is much more critical than ever. Cheaper drills tend to get very short run times and have to be recharged frequently. Their battery life tends to be bad and to make matters worse keyless chucks come loose and slide often. This is one annoyance you don’t want in your workshop. Buy an range of superior carbide tipped drill bits that are stored in a holder labeling each drill bit size. Make a habit of returning each drill bit to its prospective slot in the holder after every use. Lastly, get a set of tough steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most flexible tool in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents happen. Even though the most frequent, hammer accidents are usually of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and comes with a comfortable handle. Most hammers in the high tech range offer ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the handle and head. The head typically comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce range for overall work and also a smaller finishing hammer for more intricate work. Avoid using big framing hammers at the workshop and any with dimpled head tips. These types of hammers are more suited for rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can handle just about any sanding requirements you’ve got as a beginner woodworker. As your woodworking abilities evolve, you’ll probably update to a floor version disc and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you might discover your palm sander with just a little bit of effort can transform rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and shape rough boards using 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an range of sandpaper sheets using an extra source of 100 grit paper. You’ll get this grade of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Although low tech in concept, these tools allow you to taper borders, sew high stains and fix any imperfections in wood bits. {Begin with a typical number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood bits as you work on them. Unfortunately, superior clamps are costly and it normally takes the beginner woodworker a few years to accumulate a detailed set of timber clamps. Begin with a set of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, but the structure remains the same. Receive a pair of the longest clamps which you could spend. You may get in touch with them for smaller glue jobs and expand them to their full length for bigger jobs.

Shop Vice: A shop vice installed at the end of the seat is ideal for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices using their timber clamping surfaces can securely hold wood bits without marring or damaging them. A number of the greater vices offer you quick release mechanisms that enable the user to quickly open and close the limbs with no dull handle rotation. The wood clamping surfaces in your vice will periodically need replacement. I prefer to use soft pine in my vices which won’t crush or damage lots of the different forests that I utilize. Whether I’m working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be one of your most often used tools. Purchase a good excellent name brand tape measure with a broad tape usually in the 25-foot range. Although in your shop you might not use the tape in these lengths, the bigger tape measures provide more rigid tapes which will not flop around and slip off the end of boards. Measuring when you are by yourself will be a lot simpler, and naturally, quality tape measures can endure for many decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will require additional sanding.

What is Woodworking? Finding Woodworking Projects and Plans for Beginners Garden Shed Building Plans

Woodworking is known as the building or the creation of items from wood. You can create a great deal of unique objects from woodworking and these items can be as big as gazebos or as little as wooden toys. However large or small your private project maybe you’ll be very likely to do that aim with woodworking. In addition, woodworking has lots of private as well as emotional benefits! In the following guide, I will briefly identify some of these benefits for you.

Woodworking as a Career:

A lot of people who like to work with their hands have turned that love into a profession through woodworking. Individuals who build things out of wood are generally known keyword as carpenters. Carpenters can operate on a number of woodworking projects and job types. For example, some carpenters own their carpentry business and these folks have the luxury to set their work hours. This benefit allows carpenters the chance to spend more time with their own families and also have less job strain. Raising children is a very difficult task no matter what way you approach the task! For a carpenter who owns his or her own company, this task may not be hard because that person is going to have more time to be part of his or her child’s life. By playing a bigger role in the life of your child you will be having a greater influence on the type of character that child develops into, which is a huge concern for any loving parent. Besides these advantages, carpentry may also have health benefits too.

Finding Woodworking Projects and Plans for Beginners Garden Shed Building Plans

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood around a whole lot. This causes more physical activity, which leads to better physical health. Maintaining your body physically fit is vital and keyword will assist in preventing the occurrence of various illnesses later on in life. By being physically healthy you can reduce chances that you will have a heart attack, have seizures, become a diabetic, and reduce the chances of having a number of different illnesses.

Garden Shed Building Plans, Do It Yourself Woodworking Saves Money:

I feel as that I paid way too much when I go to home improvement shops and buy patio furniture, and I am sure that I’m not the only person who has felt this way! A successful small business owner once told me to constantly increase the sales price of a product to double everything you got it for. In this manner, you can always decrease the product to 50 percent off and still come out without getting any losses. This sounds like it might be the exact same strategy that home improvement shops use in selling their own wooden furniture solutions. Regardless, there is a way that it is possible to get around paying the additional money and that has to do with building it yourself. Fortunately, there are some really good woodworking products offering thousands of comprehensive woodworking keyword plans for hundreds of different project types. Thus, you can really build anything you want or see in almost any home improvement store. Doing something does require a little bit of time but time is well spent when you end up saving hundreds of dollars as a result of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Shed

A shed is typically a simple, single-story roofed structure in a back garden or on an allotment that is used for storage, hobbies, or as a workshop. Sheds vary considerably in their size and complexity of construction, from simple open-sided ones designed to cover bicycles or garden items to large wood-framed structures with shingled roofs, windows, and electrical outlets. Sheds used on farms or in industry can be large structures. The main types of shed construction are metal sheathing over a metal frame, plastic sheathing and frame, all-wood construction (the roof may be asphalt shingled or sheathed in tin), and vinyl-sided sheds built over a wooden frame. Small sheds may include a wooden or plastic floor, while more permanent ones may be built on a concrete pad or foundation. Sheds may be lockable to deter theft or entry by children, domestic animals, wildlife, etc.

A culture of shed enthusiasts exists in several countries for people who enjoy building sheds and spending time in them for relaxation. In Australia and New Zealand there are magazines called The Shed, an association for shed hobbyists (the Australian Men's Shed Association), and a book entitled Men and Sheds.

Depending on the region and type of use, a shed may also be called a shack, outhouse, or "outbuilding". Sheds may be classified as "accessory buildings" in municipal bylaws which may regulate their size, appearance, and distance from the principal building and boundary lines.

Video: Woodworking Tools