General Woodworking Tools | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable ideas and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and a few of those qualities along with a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, she’s also an instructor and a member of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they are after because all the thoughts and jobs Ted’s resource are easy to comprehend and simple. Ted McGrath spent two years researching so he could gather enough material for a comprehensive bundle, and he ended up making a really’complete’ woodworking source.

Many might still appear unsure whether they need to be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more challenging to make the ideal option. There are actually lots of things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. Those that are only getting started will find the thoughts and projects in Ted’s package quite easy. No doubt, intricate carpentry is involved; however, they will discover that it’s really easy to follow Ted’s easy step by step directions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which will help beginners learn a lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers will have the ability to locate any project of their choice in this bundle quite easily, even though there numerous choices.

60-Day Iron Clad Money-back Guarantee

In general, this product is and those who buy it’ll be backed by a 60-day guarantee, so if this woodworking package fails to meet them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long period to down due to its large size. Yet, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nonetheless, they didn’t mind being overrun considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so comprehensive and vast it contains pretty much every woodworking project a woodworker may be interested in building.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that can be found across the net. Ted has done his best to direct them in every possible way he could, through easy to comprehend textual instructions, clear pictures and even movies as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking projects they will find inside. Therefore, it is definitely worth buying!

The Benefits of Woodworking General Woodworking Tools

Woodworking is one hobby that could also be a rewarding profession if you like to work together with your hands and construct beautiful pieces of furniture from timber. When you learn that the woodworking crafts and eventually become a nice woodworking craftsman, you’ll be able to construct all kinds of furniture, (table, beds, and chairs), effortlessly. After that you can sell your finished woodworking projects and make a handsome profit. General Woodworking Tools.

It takes time to become skilled at the craft of woodworking. The wonderful thing about working up to that expert craftsman degree is you’ll have the ability to build some really nice furniture for you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit on your living room. It will be a topic of conversation whenever you have friends come over to visit. They will ask: How can you make it? Just how long did it take to complete the job? What type of tools did you use? Just how on earth did you create such a gorgeous piece of furniture? As you discuss your work, a sense of pride will come over you and do not be surprised if your friends ask you to create one for them too!

Finding Woodworking Projects and Plans for Beginners General Woodworking Tools

If you’re thinking you are too old or too young for woodworking, think again! You are never too old or too young for such an enjoyable hobby and it is ideal for beginners!

Where to begin in Woodworking? General Woodworking Tools.

Begin with an idea in mind of what you want to construct and then get a really good woodworking project plan that’s geared toward beginners. There are several little woodworking projects for beginners available for sale from online woodworking merchants. A few woodworking plan suggestions to get you thinking really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child simply to name a few. Obviously, you can start out with as expansive a woodworking plan as you choose. On the other hand, the odds are if you begin with a small woodworking project initially, you will get a better chance of keyword completing the job.

Your woodworking project plan must incorporate some lists! Length of: woodworking equipment, the amount and variety of wood needed, and the essential hand tools and power tools to complete the undertaking. Note: A word of warning about purchasing woodworking tools. Just buy what you need to finish your instant or upcoming endeavor. This is important especially if you are a beginner and just starting out. Tools aren’t cheap. The newcomer needs good woodworking tools, but you can easily break the bank buying a great deal of tools you might not use all that frequently. When you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you could afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, finish punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and do not overlook the wood glue and a brush to spread the wood glue! Of course, you’ll require a dry area to work and might require a set of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more woodworking hand tools and more woodworking power tools , but the concept is to purchase the essential hand and power tools which beginners will need. You can always add to your toolbox as you gain experience!

General Woodworking Tools Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you have bought your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. But if you’re unsure about what to do there is help available! There are lots of areas that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of those several woodworking magazines available. Every month the writers in woodworking publications do a story about the best way to increase your woodworking craft. Whether it’s showing you how to apply a finish to a completed project, or how to create a mortise and tenon joint, something new could be learned each month. Next, is purchasing instructional DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Starting Your First Woodworking Shop General Woodworking Tools

If you’re a beginner and very interested in doing a DIY job for home afterward, woodworking could be interesting. If you don’t have the proper information, instruction, and ability, you may land up spending more time and money than you initially meant to spend. As a novice woodworker, you need to have time and the correct tools. Having mentioned, there are a few essential aspects that you need to remember, before starting with any woodworking project.

1. If you’re just beginning, you must first have to be somewhat interested in woodworking. Creating something new with your own hands is a particular feeling. Do not start a job if you are not interested, as this may land you at a terrible location.

2. Think of the main reason behind making this woodworking project. Decide on the uses of this thing you’re making.

3. Consider your abilities and examine the time that you have, before you start with a job.

4. Start jobs which you can finish. If you are in the midst of a work, then it is better to not start any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking General Woodworking Tools

If you keep these essential things in mind before you begin a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires planning as much because it takes effort. So how do you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking jobs you want to start with. As a newcomer, always select a project that has quite a basic build up or a simple construction. Some simple to begin projects comprise, bird feeder, chairs, shelves, etc.. As soon as you get hold of these techniques, you could always move into the next level of woodworking jobs, like cabinets, sheds, and others. Beginning jobs should always keyword be complicated and less frustrating so that you have a better comprehension of working with forests and their resources. When the job is selected, start selecting your tools.

Beginners Woodworking Tools, General Woodworking Tools

Tools would be the means through which you can win the battle of woodworking. Many people think that power tools are needs. But for beginners, basic hand tools can be quite handy and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would demand are:

1. Workbench – A workbench is required for precise cuts and dimensions. Even the workbench, when fixed with vises, provide ample space to operate. As a key tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer will make things much simple for you. When you purchase a hammer, always check the equilibrium between the weight and endure. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are various sorts of saws out there on the marketplace. Choose a size that you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them can help you ahead of time woodworking. You can even buy keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape helps you to measure wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. However, this isn’t a tool for beginners, but having it would make work simpler for you at a later stage.

7. Drill – Drill helps you make holes in timber. Power drills are more helpful but they cost more. Low wattage power drills can make the task much simple.

8. Additional small and basic tools – These include pencils, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is not any fixed cost on woodworking jobs. Based on the sort of job you want to finish, pricing could be set. The simple the project, the less price it involves. However, at the very beginning purchasing the tools will be somewhat hefty. Therefore, it is better to fix a budget on the resources, then keyword on the undertaking. Buying the basic tools will ensure that you do not need to purchase any more material aside from the timber ply.

Time and Directions

Instructions are one of the principal things that each and every newcomer should follow. It is like the woodworking Bible. Instructions manual is quite easy to understand the procedure, what to do and the way to get it done. Time also has a significant role in the construction of woodworking jobs. Woodworking projects demand time and therefore it is necessary for a novice to have ample quantity of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that will make the work easy. Nevertheless, the most essential thing keyword which can allow you to achieve success is proper preparation. With proper planning and a plan, it’s possible to achieve success quickly. If you know the objective of woodworking, the thing you want to build, the tools you require in order to possess and the average time it’s possible to give every day; then you’re all set to go.

Conclusion, General Woodworking Tools

These tips and education will create the woodworking projects and plans for beginners quickly to complete. Always make sure that you have all of the essential tools, materials, space ready. Keep the instructions for constructing an item handy. Appropriate strategy and planning can allow you to earn a great woodworking job for your home.

|

How to Become a Master Woodworker From Your Own Home General Woodworking Tools

People when trying to find a way to pass time or desire an alternative way to generate money they generally turn into a hobby they enjoy. Woodworking is one of the hobbies people turn to perform as a hobby or home based business. It is very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of projects one can think of. When starting out you need to be quite cautious when choosing which job to start out with since you will find projects that can be too difficult for a newbie. But do not worry about that because we are going to provide you guidelines on the ideal means to start woodworking as a beginner.

Just like any other hobby woodworking demands some working gear, therefore before you choose your project you need to be aware of if you have the available resources to work on such a job. Try not to invest a lot of money on purchasing gear when starting out, buy more gear as you get more experience and become a professional carpenter. If you enjoy your hobby then there’ll be no difference between the hand as well as the hands.

How to Become a Master Woodworker From Your Own Home General Woodworking Tools

To keep yourself updated you have to disseminate with different brands tools and forests. Woodworking in your home will give you time to explore unique jobs and find out so many things. That is why it’s very important to invest less money when starting out so you can manage to make mistakes and at some time learning about various jobs.
It’s very important that you know more about the different types of wood available for creating jobs. Expect carpenters utilize different types of wood quality for decorating bits, learning which type of wood that they use will help you prepare the wood you will need for certain projects you might want to pursue.
Once you understand the basics of wood choice and the usage of different tools now you can employ them in cutting out well wood pieces and placing wood together. Knowing what to do can assist you in creating good projects to satisfy your wants.

General Woodworking Tools practice makes perfect so make sure you practice your work daily if possible. Try out lots of designs utilizing various tools so that you can find the hang of using the tools. When starting out you can make a range of mistakes but with time you will learn how to correctly use them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners General Woodworking Tools

Woodworking as a hobby may be among the most rewarding experiences you will ever enjoy. You may get started on a shoestring with a minimal number of gear and equipment. A small home workshop can produce a broad array of simple projects that can help you develop your creative and construction abilities while rewarding you with artistic and practical wood products that you can enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let’s talk about where you will perform your woodworking, based on the size of your house, you may have the ability to create a dedicated space to your woodworking tasks. This may be a reserved spot in your garage or on your basement. Sometimes, a detached shed or outbuilding might be perfect to set up your very first shop. A heated shop detached from your home offers one distinct advantage: better dust control. Without sophisticated dust control methods, basement assignments will inevitably create dust that travels to the living area of your home. This is very true in homes with forced air heating systems where cold air returns found in the basement draw dust up into the upper levels of the house. Another benefit of detached workshops is, clearly, the sound level. You can work without bothering the remainder of the family. A fantastic compromise might be the garage of your property.

This might help minimize the difficulties of dust and sound, however based on where you reside, a keyword garage layout might not be practical during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners General Woodworking Tools

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they add more space to function in. General Woodworking Tools if you’re able to have a dedicated place for a marathon all the greater. Floor tools and bench top equipment can stay in place from project to project. If this setup is not hopeless, at least attempt to create a bench area where equipment could be saved and pulled out as necessary. If at all possible plan for inevitable expansion as you get more tools and equipment. At the start, establish a seat area where you are able to store and use most of your equipment, with a temporary expansion of your activities onto the garage or basement floor.

A basic workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. That will enable you to work comfortably while standing. Insert a sturdy shelf below the seat to house your hands power tools and a pegboard over the bench to hang additional gear. Install a woodworking at one end of your bench on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, General Woodworking Tools

The scope of your startup equipment will be largely based on your budget. Whether you’ve got large financial resources or you are starting on a shoestring always buy quality gear. If you can afford it, buy your quality tools in your local construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative local advertisements. There are plenty of quality gently used programs out there that belong to individuals who stumbled on that one molding project around the house or obtained tools as gifts which they will never utilize. You can usually purchase tools for all these sellers for under half the initial cost and save even more money if you create a bundle deal for all their unused equipment. Of course, acquiring tools from private people will require additional time and possibly travel expenses. Weigh the advantages of traveling across town to save a couple added dollars on a cheap piece of equipment. The excess cost of travel and time in these scenarios is generally justified when purchasing large ticket items such as table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimal quantity of hand gear yet produced sophisticated and complex pieces. Focus on developing your skills with your start-up set of resources and prevent lamenting about the gear you wished you had.
Here is a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses that also offer some side protection to your eyes. Purchase a quality acrylic collection that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually hamper your vision and influence safety. Avoid wearing gloves in a workshop. Most impair vision and dust up fast. You may avoid wearing all of them together if you find them uneasy.

The next piece of crucial safety equipment you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to those noise levels can affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most employees tire faster when exposed to high noise levels. Last, wear a cap to keep the dust from your hair. With this set up I’m protecting my eyes and my ears. I’m keeping the dust from my hair. I’m all set!

Power Hand Saw: Frequently known as a skill saw following the favorite name, this can end up being the most versatile tool in a start-up workshop. In reality, at the hands of an expert, a power hand saw could be employed to build an whole house. As mentioned earlier get a quality manufacturer saw. Avoid cheap unknown brands. All these tend to cut back and will burn out before you start your next job. After selecting the proper saw install a quality blade. Most skill saws come with a starter blade of lower quality even if they’re a good saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Begin with a hybrid blade. These possess a balanced enamel count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool can’t just cut curves. It’s ideal for cutting holes in wood also like manage slots. Eventually, you’re going to want to get a band saw. Bandsaws are even more versatile but a excellent floor unit could be costly. A jigsaw can be a good stop gap to the novice woodworker.

Purchase an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch model. Down the street, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have found that purchasing quality, in this case, is much more critical than ever. Cheaper drills tend to get very short run times and need to be recharged often. Their battery life tends to be poor and to make matters worse keyless chucks come loose and slide often. This is 1 annoyance you do not want on your workshop. Purchase an assortment of superior carbide tipped drill bits that are stored in a holder labeling each drill bit size. Create a habit of returning every drill piece to its prospective slot in the holder after every use. Last, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries happen. Even though the most ordinary, hammer injuries are usually of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The good hammer is balanced, doesn’t rust and comes with a comfortable grip. Most hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce range for general work and also a smaller completing hammer for more complex work. Avoid using large framing hammers in the workshop and any with dimpled head tips. These types of hammers are more suited to rough framing tasks and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can manage just about any sanding requirements you have as a beginner woodworker. As your woodworking skills evolve, you will likely upgrade to a floor version disc and belt sander. But for the time being, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited amounts of surface space. As you embark on the first few projects you’ll find that your palm sander using a bit of effort can change rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and form rough boards with 100 grit paper and later finish your job with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets using an extra supply of 100 grit paper. You’ll get this grade of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Although low tech in theory, these tools allow you to taper borders, flatten high spots and fix any imperfections in timber bits. {Begin with a typical number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold down your wood pieces as you work on them. Unfortunately, superior clamps are costly and it usually requires the novice woodworker a couple of years to accumulate a comprehensive set of timber clamps. Begin with a pair of extended”pipe” clamps. Now the pipe has been replaced with extended steel shafts, however, the structure is still the same. Receive a pair of the longest clamps which you could spend. You can contact them for smaller adhesive jobs and enlarge them to their full length for larger projects.

Shop Vice: A shop vice installed in the end of your seat is perfect for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices using their wood clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer you rapid release mechanisms that enabled the user to quickly open and close the limbs with no tedious handle rotation. The wood clamping surfaces on your vice will occasionally require replacement. I prefer to utilize soft walnut in my vices that won’t crush or damage many of the different forests that I work with. Whether I’m working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be among the most often used tools. Buy a good excellent name brand tape measure with a wide tape usually in the 25-foot range. Although in your store you might not use the tape at these lengths, the bigger tape steps offer more rigid tapes which will not flop around and slide off the end of boards. Assessing when you’re by yourself will be a lot simpler, and naturally, quality tape steps can endure for many decades.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the timber. Avoid oversize carpenter’s pencils. Their large flat leads are just too rough for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools can help you in marking the right angles in addition to chemical angles. Also, get an range of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover the Robertson format works great for many woodworking projects and will be the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood documents. The expense of glue through all your projects is a little cost consideration. For that reason, it makes sense to decide on the very best. I also have discovered over the years that I get the best results with both indoor and outdoor jobs once I use quality outdoor grade adhesive. These resin-based compounds unlike traditional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, General Woodworking Tools

The peaceful gratification of woodworking is an excellent experience in this era of hurried lives, smart phones, and time-starved careers. With a minimum investment in the most basic tools and equipment, everyone can learn the rewarding abilities of his time-tested hobby and enjoy project after project!

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

  • NKBA Behavior Study Details Kitchen Habits and Impact on Design

    HACKETTSTOWN, N.J. —  How do people really use their kitchens? This is what the National Kitchen & Bath Association (NKBA) endeavored to find out in its latest market research, which offers a detailed analysis into the evolving way homeowners live in their kitchens and how this drives remodeling preferences in the $74 billion kitchen market.
     
    The Lifestyle Segmentation Report, released this month, identifies homeowner attitudes and behaviors regarding cooking, meal preparation, entertaining and kitchen design, and the influence of their lifestyles on the kitchen remodel and installation process.
     
    The national online survey was conducted among nearly 800 adults with household income of $40,000 or higher who had remodeled their kitchen or planned to remodel between November 2016 and August 2018. The survey segmented respondents by their confidence levels regarding cooking abilities, confidence in their kitchen design abilities, and their comfort level with using technology in the kitchen.
     
    “This exclusive research is somewhat of a departure from our traditional studies, which typically analyze product categories, design trends, size of the market and business projections,” said Bill Darcy, NKBA CEO. “It’s the first time we are looking at how changes in consumer lifestyle impact the actual use of our industry’s product and services. The data provides valuable insight for designers, remodelers, dealers, showroom associates and other professionals in how they serve their clients. This commitment to research and analysis reinforces NKBA’s thought leadership in the marketplace, and offers strategic information for the benefit of our membership.”
     
    The report provides data on family dining, meal preparation, entertaining and other activities occur in the kitchen (paying bills, homework, and more). Also reported is how homeowners use technology in the space and what storage needs they require. Furthermore, the study offers a correlation between these elements and design, the need for professionals in the process, how and where consumers shop for and buy kitchen products, and more.
     
    The full Lifestyle Segmentation Report is available for purchase at the NKBA store. For more information, click on NKBA-Lifestyle-Segmentation-Report or NKBA-Lifestyle-Segmentation-Executive-Summary.
     
     The National Kitchen & Bath Association (NKBA) is the not-for-profit trade association that owns the Kitchen & Bath Industry Show® (KBIS), as part of Design & Construction Week (DCW). With nearly 14,000 member companies representing tens of thousands of members in all segments of the kitchen and bath industry, the NKBA has educated and led the industry since the association’s founding in 1963. The NKBA envisions a world where everyone enjoys safe, beautiful and functional kitchen and bath spaces. The mission of the NKBA is to inspire, lead and empower the kitchen and bath industry through the creations of certifications, marketplaces and networks. For more information, visit www.NKBA.org  

List of tool manufacturers

Video: Woodworking Tools