Good Woodworking Ideas | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and a few of those attributes along with a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking whenever they’re after because all the thoughts and jobs Ted’s source are simple to comprehend and simple. Ted McGrath spent two years researching so he could gather enough material for a comprehensive bundle, and he ended up making a truly’complete’ woodworking source.

Many may still seem unsure whether they should be buying Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it even more challenging to make the ideal choice. There are in fact many things that place Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit out of Ted’s woodworking Package. Those who are just getting started will find the ideas and projects in Ted’s bundle quite simple. No doubt, intricate carpentry is demanded; however, they will find it really simple to follow Ted’s simple step by step instructions. Currently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who buy his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource which will help beginners learn a whole lot about woodworking. They will also have the ability to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers are going to be able to find any job of their choice within this bundle quite readily, even though there numerous options.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who buy it will be backed by a 60-day warranty, so if this woodworking package fails to satisfy them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a marginally long time to down because of its large dimensions. Nonetheless, using a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans at Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overrun considering the fact that this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so thorough and vast that it contains pretty much every woodworking project a woodworker might be interested in building.

This woodworking bundle created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking bundles that are available across the net. Ted has done his best to direct them in every possible way he could, through easy to understand textual directions, clear pictures and even videos as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking jobs they will find inside. So, it’s certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more woodworking hand tools and much more woodworking power tools , but the concept is to buy the essential hand and power tools that novices will need. You can always add to your toolbox as you get experience!

Good Woodworking Ideas Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. However, if you are not certain about what to do there is help available! There are several areas that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of the many woodworking magazines out there. Every month the authors in woodworking publications do a story about the best way to increase your woodworking craft. When it’s showing you how you can apply an end to a finished project, or how to create a mortise and tenon joint, something new can be heard each month. Next, is purchasing educational DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to use a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Good Woodworking Ideas

If you’re just beginning and very enthusiastic about doing a DIY job for home afterward, woodworking can be fun. If you don’t have the right information, education, and ability, you might land up spending more money and time than you initially meant to spend. As a novice woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a few essential aspects that you should remember, before beginning with any woodworking project.

1. If you are a beginner, you must first have to be somewhat interested in woodworking. Making something new with your hands is a particular feeling. Don’t begin a job if you’re not interested, because this might land you at a terrible location.

2. Consider the main reason behind creating this woodworking project. Choose the uses of this item you’re making.

3. Consider your abilities and analyze the time you have, before you begin with a job.

4. Start projects that you can finish. If you are in the middle of a work, then it is wise to not begin any project in any way.

The Benefits of Woodworking Good Woodworking Ideas

If you maintain these essential points in mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires planning as much because it takes effort. So how can you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to choose the woodworking jobs you want to begin with. As a newcomer, always pick a job which has a very basic build up or a simple construction. Some simple to begin projects include, bird feeder, benches, shelves, etc.. The moment you get hold of the techniques, you could always proceed to the next level of woodworking projects, like cupboards, sheds, and others. Beginning projects should always keyword be complicated and less frustrating so you have a better comprehension of working with forests and their tools. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Good Woodworking Ideas

Tools would be the means through which you will win the struggle of woodworking. Many people think that power tools are requires. But for novices, basic hand tools can be very convenient and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for exact cuts and measurements. Even the workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer can make things much easy for you. When you purchase a hammer, always check the equilibrium between the weight and endure. Always select a hardy, yet lightweight item.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool helps you to cut woods at several sizes. There are various sorts of saws out there on the marketplace. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Possessing all of them will help you ahead of time woodworking. You can also buy keyword energy screwdrivers since they make the job much quicker.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape helps you to quantify wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you require a wrench. However, this isn’t a tool for beginners, but using it might make work simpler for you in a later stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the job much easy.

8. Other small and basic tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s not any fixed price on woodworking projects. Dependent on the type of project you want to complete, pricing could be determined. The simple the project, the less cost it involves. But at the very beginning buying the tools will be a little hefty. Therefore, it is better to resolve a budget first on the tools, then keyword on the undertaking. Buying the basic tools will ensure that you don’t need to buy any more material other than the wood ply.

Time and Directions

Directions are one of the primary things which each and every newcomer should follow. Instructions manual is very simple to comprehend the procedure, what to do and how to do it. It keyword is a systematic guide for finishing the project. Time also has an important part in the construction of woodworking jobs. Woodworking projects require time and so it is necessary for a novice to have ample quantity of time every week.

Ideas for Beginners

There are no quick tips or suggestions that will make the work easy. Nevertheless, the most essential thing keyword that can allow you to reach success is proper planning. With appropriate planning and a strategy, it is possible to achieve success quickly. If you know the purpose of woodworking, then the thing that you want to build, the tools you require in order to own and the typical time it’s possible to devote every day; then you’re all set to go.

Conclusion, Good Woodworking Ideas

All these tips and instruction will make the woodworking projects and plans for beginners quickly to complete. Always make sure that you have all the essential tools, materials, space ready. Read the instructions for constructing an item handy. Appropriate strategy and preparation will help you to make a fantastic woodworking job for your home.

|

Finding Woodworking Projects and Plans for Beginners Good Woodworking Ideas

Folks if you’re looking for a way to pass time or desire an alternate way to generate money they usually turn to a hobby they enjoy. It is very exciting to do and everyone can get started.

When doing woodworking at home there are lots of jobs one can consider. When starting out you need to be quite cautious when choosing which project to begin with because you will find jobs which can be too difficult for a newbie. But do not worry about that because we will give you tips on the right means to start woodworking as a newcomer.

Just like any other hobby woodworking demands some working gear, therefore before you choose your project you have to know if you’ve got the available resources to work on that job. Try not to invest a good deal of cash on buying equipment when starting out, buy more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any gap between the hand and the normal hands.

How to Become a Master Woodworker From Your Own Home Good Woodworking Ideas

Woodworking in your home will provide you time to explore unique projects and find out a lot of things. That’s why it’s very important to spend less money when starting out so you can manage to make mistakes and at some time learning about various jobs.
It’s very important that you know more about different types of wood available for creating jobs. Anticipate carpenters utilize several kinds of wood quality for decorating pieces, learning what kind of wood that they use can allow you to prepare the wood you will need for specific jobs you might want to pursue.
Once you understand the fundamentals of wood selection and the use of different tools you can now employ them in cutting well wood pieces and placing wood together. Knowing what to do can help you in building good jobs to fulfill your wants.

Good Woodworking Ideas practice makes perfect so make sure you practice your work daily if possible. Try out lots of layouts utilizing a variety of tools so you can get the hang of using the tools. When starting out you can earn a range of mistakes but with time you will learn how to correctly use them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Good Woodworking Ideas

Woodworking as a hobby can be among the most rewarding experiences you’ll ever appreciate. You can begin on a shoestring with a minimum amount of tools and equipment. A small home workshop may produce a broad variety of simple projects which will allow you to develop your creative and construction skills while rewarding you with practical and artistic wood products that you are able to enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s talk about where you’ll perform your woodworking, based on the size of your house, you might have the ability to produce a dedicated space into your woodworking activities. This may be a reserved place on your garage or in your basement. Sometimes, a detached shed or outbuilding might be perfect to prepare your very first store. A heated store detached from your home offers one distinct advantage: better pest management. Without sophisticated dust control methods, basement assignments will inevitably produce dust that travels to the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns found in the cellar draw dust up into the top levels of the house. Another advantage of detached workshops would be, clearly, the noise level. It’s possible to work without bothering the rest of the family. A fantastic compromise might be the garage of your home.

This can help minimize the difficulties of dust and noise, however depending on where you live, a keyword garage layout might not be sensible during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Good Woodworking Ideas

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes that they include more space to work in. Good Woodworking Ideas if you’re able to have a dedicated place for a marathon all the better. Floor gear and bench top gear can remain in position from project to project. If this setup is not hopeless, at least attempt to make a chair area where equipment can be stored and pulled out as necessary. If possible plan for inevitable growth as you acquire more tools and gear. In the beginning, establish a seat area where you can store and use most of your gear, using a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. This will let you work comfortably while standing. Add a sturdy shelf beneath the bench to house your hands power tools along with a pegboard above the seat to hang additional gear. Install a woodworking vice at one end of your bench on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Good Woodworking Ideas

The scope of your startup equipment will be mostly based on your financial plan. Whether you’ve got large financial resources or you’re starting on a shoestring always purchase quality equipment. If you can afford it, then purchase your quality tools at your regional construction and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or alternative local advertisements. There are plenty of quality gently used tools out there that belong to individuals who stumbled on that 1 molding job around the house or received tools as gifts which they will never use. You can usually purchase tools for all these sellers for under half of the initial cost and save even more money if you create a bundle deal for all their unused equipment. Of course, acquiring tools from private people will take additional time and perhaps travel expenses. Weigh out the benefits of traveling around town to save a couple added dollars on a inexpensive piece of equipment. The extra cost of travel and time in these situations is usually justified when purchasing large ticket items like table saws, bandsaws or large ended tools such as surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal amount of hand gear yet generated sophisticated and intricate bits. Concentrate on developing your skills with your startup set of resources and prevent lamenting about the equipment you wished you had.
Here is a checklist of the more useful tools you’ll need to get started:
Safety Gear: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer you some side protection for your eyes. Purchase a quality acrylic collection that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and influence safety. Avoid wearing gloves at a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together if you find them uneasy.

The next piece of crucial safety gear you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking can be long-term and noisy exposure to these sound levels may affect hearing and result in tinnitus and other hearing losses. I’m keeping the dust from my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw following the popular brand name, this may end up being the most versatile instrument in a start-up workshop. In fact, at the hands of an expert, a power hand saw could be used to build an whole property. Eventually, you’ll want to purchase a table saw, but for now, a power hand saw for the woodworker on a budget enables him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned earlier get a quality manufacturer saw. Avoid cheap unknown brands. These are inclined to cut back and will burn out before you even start your second job. After selecting the right saw put in a quality blade. Most skill saws include a starter blade of lower quality even if they are a good saw. Keep this blade as a copy and install an excellent blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will add excellent versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument can’t only cut curves. It’s ideal for cutting holes in timber too like handle slots. Eventually, you’re going to want to get a band saw. Bandsaws are even more flexible but a quality floor unit could be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the standard 3/8 inch version. Down the street, the 1/2 inch version will prove to be more versatile. Through hard lessons learned, I have found that purchasing quality, in this case, is more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged often. Their battery life tends to be poor and to make matters worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t want on your workshop. Purchase an assortment of superior carbide tipped drill bits that are kept in a holder labeling each drill bit size. Create a habit of returning each drill bit to its potential slot at the holder after every use. Last, get a pair of hard steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most flexible tool in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop injuries happen. Even though the most ordinary, hammer accidents are often of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and features a comfortable grip. Many hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers usually have wood handles with poor joints between the handle and head. The head usually comes loose and the instrument becomes useless. Select a title brand quality hammer in the 16-ounce scope for general work and also a smaller finishing hammer for more complex work. Avoid using big framing hammers in the workshop and some other with dimpled mind tips. These types of hammers are more appropriate for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can handle pretty much any trimming requirements that you have as a novice woodworker. As your woodworking skills evolve, you will probably upgrade to a floor model disk and belt sander. But for now, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on the first few projects you might discover your palm sander with just a bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an range of sandpaper sheets with an extra supply of 100 grit paper. You’ll find this caliber of paper that the most versatile on your shop.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Although low tech in theory, these tools enable you to taper edges, flatten high spots and correct any imperfections in wood pieces. {Begin with a typical amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, good clamps are costly and it normally takes the beginner woodworker a couple of years to accumulate a detailed set of wood clamps. Begin with a pair of extended”pipe” clamps. Now the pipe has been replaced with long steel shafts, however, the structure remains the same. Get a set of the longest clamps that you could spend. You can get in touch with them for smaller adhesive jobs and enlarge them to their entire length for larger projects.

Shop Vice: A shop vice installed in the end of the seat is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the better vices offer rapid release mechanisms that enabled the user to quickly open and close the jaws with no dull handle rotation. The timber beamed surfaces in your vice will occasionally require replacement. I would rather utilize soft pine in my vices that will not crush or damage many of the various forests that I utilize. Whether I am working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be one of the most frequently used tools. Buy a fantastic quality name brand tape measure with a broad tape usually from the 25-foot selection. Even though in your store you may not use the tape in these lengths, the bigger tape steps provide more rigid tapes that won’t flop around and slip off the end of planks. Measuring when you are by yourself will be a lot easier, and of course, quality tape steps can last for several decades.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will require additional sanding. Avoid oversize carpenter’s pencils. Their large flat leads are just too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools will help you in marking the ideal angles in addition to compound angles. Also, get an range of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I discover the Robertson format works great for most woodworking projects and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood documents. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and fixing little mistakes on the way.

Adhesives: Not all glues are created equal. Stay away from inexpensive home brands sold as carpenter’s glue. The expense of glue through all of your jobs is a little cost consideration. Therefore, it makes sense to decide on the very best. I have also found over time that I get the best results with both indoor and outdoor jobs once I use quality outside grade glue. All these resin-based compounds unlike conventional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Good Woodworking Ideas

The peaceful gratification of woodworking is a wonderful adventure in this era of hurried lives, smartphones, and time-starved livelihood. With a minimal investment at the most basic tools and equipment, anyone can learn the profitable skills of his time-tested hobby and enjoy project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Instructables

Instructables is a website specializing in user-created and uploaded do-it-yourself projects, currently owned by Autodesk. It was created by Eric Wilhelm and Saul Griffith and launched in August 2005. Instructables is dedicated to step-by-step collaboration among members to build a variety of projects. Users post instructions to their projects, usually accompanied by visual aids, and then interact through comment sections below each Instructable step as well in topic forums.

After graduating from the Media Lab at MIT, Wilhelm and Griffith founded Squid Labs, an engineering and technology company specializing in design and consulting. Instructables started as an internal Squid Labs project, which later spun out as an independent company with Wilhelm as its CEO. Wilhelm still regularly contributes to the site.

The original content focused mostly on such projects as building electronic or mechanical devices to solve common problems around the home. The scope of the project has expanded to include a larger array of categories, including Food, Living, Outside, Tech, Play and Workshop. Sponsored categories are sometimes added for companies to advertise a specific topic on the site.

Video: Woodworking Tools