Good Woodworking Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and some of those qualities along with a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking whenever they are following because most of the ideas and jobs Ted’s resource are easy to comprehend and simple. Ted McGrath spent two years researching so he could gather enough material for an extensive bundle, and he ended up creating a really’complete’ woodworking resource.

Many might still appear unsure whether they should be buying Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it more difficult to make the right option. There are in fact many things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit out of Ted’s woodworking Package. People that are only getting started will find the thoughts and projects in Ted’s package quite simple. Without doubt, complicated carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s simple step-by-step instructions. Presently, both novice and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who buy his package, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource that helps beginners learn a whole lot about woodworking. They will also be able to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers are going to be able to find any job of their choice in this package quite easily, though there numerous choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and people who buy it will be endorsed by a 60-day warranty, so if this woodworking package fails to meet them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long time to down due to its large dimensions. Yet, with a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overwhelmed considering the fact that this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so comprehensive and vast that it contains just about every woodworking project a woodworker might be interested in building.

This woodworking bundle made by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking packages that are available across the internet. Ted has done his best to guide them in every possible way he can, through simple to comprehend textual instructions, clear pictures and even videos as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking projects they will find inside. So, it is certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more woodworking hand tools and much more woodworking power tools , but the concept is to purchase the crucial hand and power tools which novices will need. You may always increase your toolbox as you gain experience!

Good Woodworking Projects Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to complete your project. However, if you are not certain about what to do there is help available! There are lots of places that starting woodworkers can find out about the woodworking craft. First, subscribe to one of those many woodworking magazines out there. Each month the writers in woodworking magazines do a story on the best way best to increase your woodworking craft. When it is showing you how you can apply an end to a completed project, or how to create a mortise and tenon joint, something new could be learned every month. Next, is buying educational DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to work with a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Good Woodworking Projects

If you’re just beginning and very enthusiastic about doing a DIY job for home afterward, woodworking can be fun. If you do not have the right information, education, and ability, you might wind up spending more time and money than you initially meant to spend. As a novice woodworker, you want to have space, time and the appropriate tools. Having said, there are a few essential factors you should keep in mind, before starting with any woodworking project.

1. If you are just beginning, you should first have to be very interested in woodworking. Creating something new with your own hands is a special sense. Don’t start a job if you’re not interested, because this might land you in a bad place.

2. Think of the primary reason behind making this woodworking project. Decide on the uses of the item you are making.

3. Consider your skills and examine the time that you have, before you start with a project.

4. Start projects which you’re able to complete. If you are in the midst of a work, then it’s wise to not begin any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Good Woodworking Projects

If you keep these vital points in mind before you begin a woodworking project, it will become very easy for you to achieve success. Woodwork requires planning as much as it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to choose the woodworking projects that you want to begin with. As a beginner, always select a project that has a very basic construct up or a simple structure. A few easy to start projects include, bird feeder, chairs, shelves, etc.. The moment you find these techniques, you can always proceed to the next level of woodworking projects, like cupboards, sheds, and others. Beginning projects should always keyword be less complicated and less frustrating so you have a better knowledge of working with woods and their tools. When the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Good Woodworking Projects

Tools are the ways through which you can win the battle of woodworking. Many men and women believe power tools are requires. However, for beginners, basic hand tools can be very convenient and more than helpful in completing a job. If woodworking is the hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for exact cuts and measurements. The workbench, when fixed with vises, offer ample space to work. As a key tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters considerably easy for you. When you buy a hammer, constantly check the balance between the weight and endure. Always pick a hardy, yet lightweight item.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at several sizes. There are various sorts of saws out there in the market. Choose a size that you can handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Possessing all of them will help you ahead of time woodworking. You can even purchase keyword energy screwdrivers as they make the work much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape gives you the capacity to quantify wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you demand a wrench. However, this is not a tool for beginners, but having it might make work easier for you in a later stage.

7. Drill – Drill helps you make holes in wood. Low wattage power drills can make the job much easy.

8. Other small and basic tools – These include pencils, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s not any fixed cost on woodworking projects. Based on the type of job that you want to complete, pricing can be set. The easy the project, the less price it involves. However, at the beginning purchasing the tools will be somewhat hefty. Because of this, it’s better to resolve a budget first on the tools, then keyword on the project. Purchasing the basic tools will make certain you do not need to buy any more material other than the timber ply.

Time and Instructions

Instructions are one of the primary things that every beginner should follow. It is like the woodworking Bible. Instructions manual is very simple to understand the procedure, what to do and the way to get it done. It keyword is a systematic guide for finishing the project. Time also plays an important part in the building of woodworking jobs. Woodworking projects require time and so it’s crucial for a beginner to have ample amount of time every week.

Tips and Tricks for Beginners

There are no quick tips or suggestions that would make the work easy. Nevertheless, the most essential thing keyword that will allow you to reach success is proper planning. With appropriate planning and a strategy, it’s likely to achieve success quickly. If you understand the objective of woodworking, then the thing you want to build, the tools you require to possess and the typical time you can give daily; then you’re ready to go.

Conclusion, Good Woodworking Projects

These strategies and education will create the woodworking projects and strategies for novices quickly to finish. Always make sure that you have all the vital tools, materials, space prepared. Keep the instructions for constructing a product handy. Proper strategy and preparation will allow you to make a great woodworking job for your home.

|

How to Become a Master Woodworker From Your Own Home Good Woodworking Projects

Folks if you’re trying to find a way to pass time or want an alternative way to make money they generally turn into a hobby that they enjoy. Woodworking is one of the hobbies individuals turn to perform as a hobby or home based business. It is very exciting to do and anyone can begin.

When doing woodworking at home there are lots of projects one can consider. When starting out you have to be quite cautious when choosing which project to start out with because you will find jobs that may be too difficult for a newbie. But do not be concerned about that since we will give you tips on the right way to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, so before you choose your project you need to be aware of if you’ve got the available tools to work on that job. Try not to spend a good deal of money on buying equipment when starting out, purchase more gear as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there’ll be no gap between the artistic hand as well as the normal hands.

The Benefits of Woodworking Good Woodworking Projects

Woodworking at home will provide you time to research unique projects and find out a lot of things. That is why it’s important to spend less money when starting out so you can manage to make mistakes and at some time learning about different projects.
It’s extremely important that you know more about the different types of wood available for creating jobs. Anticipate carpenters utilize several types of wood quality for decorating pieces, learning what kind of wood they use will help you prepare the wood you’ll need for certain projects you might choose to pursue.
Once you understand the basics of wood choice and the usage of different tools you can now employ them in cutting well wood pieces and placing wood together. Knowing what to do can assist you in building good projects to fulfill your needs.

Good Woodworking Projects practice makes perfect so make sure that you practice your work every day if possible. Try out lots of designs using a variety of tools so that you can find the hang of using the tools. When starting out you can earn a range of mistakes but with time you will learn how to correctly use them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Good Woodworking Projects

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever enjoy. You may get started on a shoestring with a minimal amount of tools and equipment. A little home workshop can generate a wide variety of simple projects which can help you develop your creative and building skills while rewarding you with practical and artistic wood products that you can enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let us talk about where you will do your woodworking, Depending on the dimensions of your home, you might have the ability to create a dedicated space into your woodworking tasks. This might be a reserved spot on your garage or in your cellar. In some cases, a detached shed or outbuilding might be ideal to prepare your very first store. A heated shop detached from your house provides one distinct advantage: better pest management. Without complex dust control methods, basement assignments will inevitably create dust that travels into the living area of your home. This is particularly true in homes with forced air heating systems in which cold air returns found in the basement draw dust up into the upper levels of the home. Another benefit of detached workshops is, of course, the noise level. It’s possible to work without bothering the rest of the household. A fantastic compromise might be the garage of your home.

This might help minimize the problems of dust and sound, however depending on where you reside, a keyword garage workshop might not be sensible during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Good Woodworking Projects

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to work in. Good Woodworking Projects if you’re able to have a dedicated place for a marathon all the greater. Floor gear and bench top equipment can stay in position from project to project. If this installation isn’t hopeless, at least attempt to create a bench area where equipment could be stored and pulled out as necessary. If possible plan for inevitable expansion as you get more tools and gear. In the beginning, set up a bench area where you are able to shop and use the majority of your gear, using a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. Insert a sturdy shelf beneath the bench to house your hands power tools and a pegboard over the bench to hang other equipment. Install a woodworking at one end of your seat on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Good Woodworking Projects

The reach of your start-up equipment will be largely based on your budget. Whether you’ve got large financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, purchase your quality tools at the local building and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or other local ads. You will find plenty of quality gently used tools out there that belong to individuals who embarked on that 1 molding project around the house or received tools as gifts that they won’t ever utilize. You can usually purchase tools for all these sellers for less than half of the initial cost and save even more money should you create a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will take extra time and perhaps travel expenses. Weigh the advantages of traveling across town to save a few added bucks on a inexpensive piece of gear. The extra cost of travel and time in these situations is usually justified when purchasing large ticket items like table saws, bandsaws or high ended tools such as surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimum quantity of hand gear yet produced sophisticated and complex pieces. Focus on developing your skills with your start-up set of resources and avoid lamenting about the equipment you wished you had.
Here’s a checklist of the useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a nice pair of safety glasses that also offer some side protection to your eyes. Buy a quality oil set that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually impair your vision and influence security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You can avoid wearing all of them together if you find them uncomfortable.

The next bit of critical safety equipment that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking may be long-term and noisy exposure to these noise levels can affect hearing and result in tinnitus and other hearing losses. I am keeping the dust from my hair. I’m all set!

Power Hand Saw: Often known as a skill saw following the popular name, this may prove to be the most versatile instrument in a start-up workshop. In reality, at the hands of a professional, a power hand saw can be used to construct an whole property. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. These tend to cut back and will burn out before you even start your next project. After choosing the proper saw install a quality blade. Most skill saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Start with a hybrid . These possess a balanced enamel count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool can’t just cut curves. It’s ideal for cutting holes in wood also like manage slots. At some point, you’ll want to get a ring saw. Bandsaws are much more flexible but a quality floor unit could be expensive. A jigsaw may be a good stop gap to the novice woodworker.

Buy an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the conventional 3/8 inch version. Through tough lessons learned, I have discovered that buying quality, in this scenario, is much more crucial than ever. Cheaper drills tend to have very short run times and need to be recharged frequently. Their battery life tends to be poor and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you don’t want in your workshop. Purchase an range of superior carbide tipped drill bits that are stored in a holder tagging each drill bit size. Create a habit of returning every drill piece to its prospective slot in the holder after each use. Last, get a pair of tough steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop injuries occur. Even though the most ordinary, hammer injuries are often of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The good hammer is balanced, does not rust and comes with a comfortable grip. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The mind usually comes loose and the instrument becomes useless. Pick a title brand quality hammer in the 16-ounce scope for overall work and also a smaller finishing hammer for more intricate work. Avoid using large framing hammers in the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage just about any trimming requirements that you’ve got as a beginner woodworker. As your woodworking abilities evolve, you’ll likely upgrade to a floor model disk and belt sander. But for now, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you’ll find that your palm sander using just a bit of effort can transform rough looking inventions into virtual functions of art! You can use your palm sander to sand and form rough planks using 100 grit paper and after finish your job with 200 or 300 grit paper. Buy an assortment of sandpaper sheets using an extra source of 100 grit paper. You’ll find this grade of paper that the most versatile in your shop.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Though low tech in theory, these tools allow you to taper borders, sew high stains and fix any imperfections in timber bits. {Begin with a typical number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold down your wood pieces as you work on them. Unfortunately, good clamps are costly and it usually takes the novice woodworker a few years to collect a comprehensive set of wood clamps. Start with a pair of extended”pipe” clamps. Today the pipe has been replaced with long steel shafts, but the structure is still the same. Receive a set of the maximum clamps that you could spend. You may contact them for smaller glue jobs and expand them to their full length for bigger jobs.

Shop Vice: A shop vice installed at the end of your bench is perfect for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices using their timber clamping surfaces can securely hold wood bits without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enable the user to rapidly open and close the limbs without tedious handle turning. The timber beamed surfaces on your vice will occasionally need replacement. I would rather utilize soft walnut in my vices that will not crush or damage many of the different woods that I utilize. Whether I am working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among the most frequently used tools. Buy a fantastic excellent name brand tape measure with a broad tape typically from the 25-foot selection. Even though in your store you may not be using the tape in these lengths, the larger tape measures offer more rigid tapes that will not flop around and slip off the end of boards. Assessing when you’re by yourself will be a lot simpler, and naturally, quality tape steps can endure for many years.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Additional Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools can help you in marking the ideal angles in addition to chemical angles. Get the number two and three Robertson set. I find the Robertson format works great for many woodworking jobs and will be the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood files. The expense of adhesive through all of your projects is a minor cost consideration. Therefore, it makes sense to decide on the very best. I have also found over the years that I receive the best results with both indoor and outdoor jobs when I use quality outdoor grade glue. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Good Woodworking Projects

The peaceful gratification of woodworking is an excellent experience in this day and age of hurried lives, smartphones, and time-starved careers. With a minimal investment at the most rudimentary tools and equipment, anyone can learn the rewarding abilities of his time-tested avocation and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Tools