Handmade Woodworking Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable ideas and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and some of those qualities alongside a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an instructor and a member of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they are following because most of the thoughts and projects Ted’s resource are easy to understand and simple. Ted McGrath spent two years researching so he could collect enough material for a comprehensive package, and he ended up making a truly’complete’ woodworking source.

Many may still seem unsure whether they need to be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The myriad of resources available online make it more difficult to make the ideal choice. There are in fact many things that set Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit from Ted’s woodworking Package. People that are just getting started will find the thoughts and projects in Ted’s bundle quite simple. Without doubt, intricate carpentry is involved; nonetheless, they will find it really simple to follow Ted’s simple step-by-step instructions. Currently, both novice and experienced ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who purchase his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource that helps beginners learn a whole lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers are going to have the ability to find any job of their choice within this bundle quite readily, even though there numerous options.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and people who buy it will be backed by a 60-day guarantee, so when this woodworking package fails to satisfy them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large size. Yet, with a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

As there are several ideas, plans and projects at Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overrun considering the fact that this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so thorough and vast that it contains just about every woodworking project a woodworker might be interested in building.

This woodworking package created by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking packages that are available throughout the net. Ted has done his very best to direct them in every conceivable way he can, through simple to comprehend textual directions, clear pictures and even videos too.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking projects they will find within. So, it is certainly worth buying!

How to Become a Master Woodworker From Your Own Home Handmade Woodworking Projects

Woodworking is one hobby that can also be a rewarding career if you like to work with your hands and build beautiful pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a fine woodworking craftsman, you’ll be able to build all types of furniture, (table, beds, and chairs), with ease. After that you can sell your finished woodworking projects and make a handsome profit. Handmade Woodworking Projects.

It requires time to become proficient in the craft of woodworking. The nice thing about working up to this expert craftsman level is you will have the ability to create some really wonderful furniture to you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit in your living room. It will be a topic of conversation when you have friends come over to see. They will ask: How did you make it? Where did you get the woodworking programs? How long did it take to finish the job? What kind of wood did you use? What kind of tools did you use? How on earth did you create such a gorgeous item of furniture? As you discuss your job, a sense of pride will come over you and also do not be surprised if your friends ask you to make one for them too!

How to Become a Master Woodworker From Your Own Home Handmade Woodworking Projects

If you are thinking you are too old or too young for woodworking, think again! You are never too old or too young for such an enjoyable hobby and it’s perfect for beginners!

Where to begin in Woodworking? Handmade Woodworking Projects.

Start with an idea in your mind of what you want to construct then get a excellent woodworking project plan that is geared toward novices. There are numerous small woodworking projects for novices available for purchase from online woodworking merchants. Obviously, you can start out with as grand a woodworking program as you choose. On the other hand, the chances are if you begin with a small woodworking job at first, you will have a better prospect of keyword completing the project.

Your woodworking project plan must incorporate some lists! Length of: woodworking hardware, the quantity and variety of wood required, and the required hand tools and power tools to complete the undertaking. Note: A word of caution about purchasing woodworking tools. Just buy what you need to finish your instant or upcoming endeavor. This is important especially if you are a beginner and just starting out. Tools are not affordable. The beginner needs good woodworking gear, but it is simple to break the bank purchasing a great deal of tools you might not utilize all that often. When you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, complete punches, flat and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking clamps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also don’t overlook the wood glue and a brush to spread the wood glue! Of course, you will need a dry area to work and may require a set of saw horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more innovative hand tools and more woodworking power tools , but the concept is to purchase the essential hand and power tools that novices will need. You may always add to your toolbox as you gain experience!

Handmade Woodworking Projects Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to finish your project. However, if you are unsure about what to do there is help available! There are lots of places that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Every month the authors in woodworking magazines do a story on the best way to increase your woodworking craft. Whether it is showing you how to apply a finish to a finished job, or how to make a mortise and tenon joint, something new could be learned each month. Next, is purchasing educational DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to work with a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Handmade Woodworking Projects

If you’re a beginner and very enthusiastic about doing a DIY project for home afterward, woodworking can be interesting. If you do not have the proper information, instruction, and skill, you might land up spending more money and time than you initially meant to spend. As a novice woodworker, you want to have space, time and the appropriate tools. Having said, there are a couple of essential aspects that you should remember, before starting with any woodworking project.

1. If you’re a beginner, you must first have to be very interested in woodworking. Creating something new with your own hands is a special feeling. Do not start a job if you are not interested, as this may land you in a terrible place.

2. Think of the main reason behind making this woodworking project. Decide on the uses of this thing you’re making.

3. Consider your skills and analyze the time you have, before you begin with a job.

4. Start projects which you can finish. If you’re in the midst of some work, then it is better not to start any project at all.

The Benefits of Woodworking Handmade Woodworking Projects

If you keep those vital points in mind before you begin a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires planning as much as it takes effort. So how do you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to choose the woodworking projects you wish to begin with. As a newcomer, always pick a project which has a very basic build up or a simple structure. Some simple to start projects comprise, bird feeder, chairs, shelves, etc.. As soon as you get hold of the techniques, you could always move into the next level of woodworking projects, such as cabinets, sheds, along with others. Beginning projects should keyword be less complicated and less frustrating so you have a better knowledge of working with forests and their tools. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Handmade Woodworking Projects

Tools are the ways through which you will win the battle of woodworking. A lot of people think that power tools are requires. But for beginners, basic hand tools can be quite convenient and more than helpful in completing a project. If woodworking is your hobby, then some tools that you would demand are:

1. Workbench – A workbench is required for precise cuts and measurements. Even the workbench, when fixed with vises, offer ample space to operate. As a primary tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make things much simple for you. When you purchase a hammer, always check the balance between the weight and stand. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool can help you to cut woods at several sizes. There are various sorts of saws out there on the marketplace. Decide on a size which you could deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them can help you ahead of time woodworking. You can also buy keyword energy screwdrivers as they make the work much quicker.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape gives you the capacity to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. However, this is not a tool for novices, but using it would make work simpler for you in a subsequent stage.

7. Drill – Drill helps you create holes in wood. Power drills are more helpful but they cost more. Low wattage power drills will make the job much easy.

8. Other small and basic tools – These include pencils, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed price on woodworking projects. Based on the sort of project you would like to finish, pricing could be set. The simple the project, the less price it involves. But at the beginning purchasing the tools will be somewhat hefty. Therefore, it’s better to resolve a budget on the resources, then keyword on the undertaking. Buying the basic tools will ensure that you don’t have to buy any more material aside from the timber ply.

Time and Instructions

Instructions are one of the primary things which each and every beginner should follow. It’s like the woodworking Bible. Instructions guide is quite easy to understand the procedure, what to do and how to get it done. It keyword is a systematic guide for finishing the job. Time also plays a significant part in the building of woodworking jobs. Woodworking projects require time and therefore it is crucial for a beginner to have ample quantity of time every week.

Tips and Tricks for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most essential thing keyword that will allow you to achieve success is proper planning. With proper planning and a strategy, it’s likely to achieve success quickly. If you know the objective of woodworking, the item you want to construct, the tools you need to own and the average time you can give daily; then you are ready to go.

Conclusion, Handmade Woodworking Projects

These tips and instruction is likely to make the woodworking projects and plans for beginners fast to finish. Always make sure you have all the vital tools, materials, area prepared. Keep the instructions for building an item handy. Proper strategy and preparation will help you to make a fantastic woodworking project for your property.

|

Starting Your First Woodworking Shop Handmade Woodworking Projects

Folks if you’re trying to find a way to pass time or desire an alternative way to generate money they usually turn into a hobby they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based company. It is very exciting to do and everyone can begin.

When doing woodworking at home there are a lot of projects one can think of. When starting out you need to be very careful when choosing which job to begin with since there are projects that may be too difficult for a beginner. But do not be concerned about that because we are going to give you tips on the right way to start woodworking as a beginner.

The same as any other hobby woodworking requires some working gear, so before you choose your project you need to know whether you’ve got the available tools to work on that job. Try not to spend a lot of money on buying gear when starting out, buy more equipment as you get more experience and become an expert carpenter. Should you enjoy your hobby then there will be no difference between the hand and the normal hands.

The Benefits of Woodworking Handmade Woodworking Projects

To keep yourself updated you have to disseminate with various brands tools and woods. Woodworking at home will provide you time to research unique jobs and learn so many things. That’s why it’s very important to invest less money when starting out so that you can afford to make mistakes and at any time learning about different projects.
It is extremely important you know about different kinds of wood available for making jobs. Expect carpenters utilize several types of wood quality for decorating pieces, learning what type of wood that they use will allow you to prepare the wood you’ll need for certain projects you may choose to pursue.
Once you know the fundamentals of wood selection and the usage of different tools now you can implement them in cutting well wood pieces and putting wood together. Knowing what to do will assist you in creating good jobs to fulfill your wants.

Handmade Woodworking Projects practice makes perfect so make sure that you practice your work every day if possible. Try out a lot of designs utilizing a variety of tools so that you can find the hang of using the tools. When starting out you may earn a range of errors but with time you will find out how to correctly use them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Handmade Woodworking Projects

Woodworking as a hobby can be among the most rewarding experiences you will ever enjoy. You may get started on a shoestring with a minimal amount of tools and equipment. A little home workshop can generate a broad array of simple projects which can help you develop your creative and building skills while rewarding you with artistic and practical wood products which you are able to enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us talk about where you’ll do your woodworking, Depending on the size of your home, you might be able to produce a dedicated space into your woodworking tasks. This may be a reserved spot on your garage or in your cellar. Sometimes, a detached shed or outbuilding may be ideal to prepare your very first store. A heated store detached from your home provides one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably create dust that travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air yields located in the cellar draw dust up into the upper levels of the home. Another advantage of detached workshops would be, clearly, the noise level. It’s possible to work without disturbing the rest of the family. A fantastic compromise could be the garage of your home.

This can help decrease the difficulties of dust and noise, however based on where you live, a keyword garage layout might not be sensible during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Handmade Woodworking Projects

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes they add more space to function in. Handmade Woodworking Projects if you’re able to have a dedicated spot for a marathon all the better. Floor tools and bench top equipment can remain in place from project to project. If this setup isn’t hopeless, at least try to create a bench area where equipment could be stored and pulled out as necessary. If possible plan for inevitable growth as you get more tools and equipment. At the start, establish a bench area where you can store and use the majority of your equipment, using a temporary expansion of your actions onto the garage or basement floor.

A basic workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Insert a sturdy shelf below the seat to home your hands power tools along with a pegboard above the bench to hang other gear. Install a woodworking vice at one end of your bench on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Handmade Woodworking Projects

The scope of your start-up equipment will be largely based on your financial plan. Whether you have got big financial resources or you’re starting on a shoestring consistently purchase quality equipment. If you can afford it, purchase your quality tools in the local building and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative regional advertisements. There are plenty of quality gently used programs out there which belong to individuals who embarked on that 1 molding job around the home or obtained tools as gifts which they won’t ever use. You can usually buy tools for these sellers for under half the original cost and save even more money if you make a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will take extra time and perhaps travel expenditures. Weigh out the advantages of traveling across town to save a few added bucks on a cheap piece of equipment. The extra expense of travel and time in these situations is usually justified when buying large ticket items like table saws, bandsaws or high ended tools such as surface planers in the future.
For smaller acquisitions, a visit to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimum quantity of hand equipment yet generated sophisticated and complex pieces. Focus on developing your abilities with your startup set of tools and avoid lamenting about the gear you wished you had.
Here’s a checklist of the more useful tools You Will Need to get started:
Safety Gear: Start as anticipated by eye protection. Get a decent pair of safety glasses which also offer you some side protection for your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually impair your vision and affect safety. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together if you find them uncomfortable.

The next bit of critical safety equipment you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking may be noisy and long-term exposure to those noise levels can affect hearing and result in tinnitus and other hearing losses. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Often referred to as a skill saw following the popular name, this can prove to be the most flexible instrument in a start-up workshop. In reality, in the hands of a professional, a power hand saw could be used to construct an whole house. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. All these are inclined to cut back and will burn out before you even start your next project. After selecting the proper saw install an excellent blade. Most saws include a starter blade of lower quality even if they’re a good saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will include great flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument cannot just cut curves. It is perfect for cutting holes in wood also like handle slots. Eventually, you’re going to want to obtain a ring saw. Bandsaws are much more versatile but a excellent floor unit could be expensive. A jigsaw may be a good stop gap to the novice woodworker.

Buy an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch version. Through hard lessons learned, I have discovered that purchasing quality, in this case, is more critical than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their long-term battery life tends to be poor and to make things worse keyless chucks come loose and slip often. This is 1 annoyance you do not need in your workshop. Purchase an range of superior carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning each drill bit to its potential slot at the holder after each use. Lastly, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most flexible instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop injuries happen. Although the most ordinary, hammer injuries are usually of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood handles with inferior joints between the head and handle. The head typically comes loose and the tool becomes useless. Select a title brand quality hammer in the 16-ounce range for overall work and also a smaller completing hammer for more complex work. Avoid using big framing hammers at the workshop and some other with dimpled mind tips. These kinds of hammers are more suited for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can handle just about any trimming requirements that you have as a novice woodworker. As your woodworking skills evolve, you’ll likely upgrade to a floor model disc and belt sander. However, for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited amounts of surface area. As you embark on your first few projects you’ll discover your palm sander using a little bit of effort can change rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and form rough boards using 100 grit paper and after finish your work with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets using an excess source of 100 grit paper. You’ll find this caliber of paper that the most versatile in your store.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Though low tech in concept, these tools enable you to taper edges, sew high stains and fix any imperfections in wood pieces. {Start with a typical number 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold off your wood bits as you work on them. Unfortunately, superior clamps are expensive and it normally takes the beginner woodworker a few years to accumulate a detailed set of wood clamps. Start with a pair of long”pipe” clamps. Today the pipe has been replaced with extended steel shafts, but the structure is still the same. Receive a pair of the maximum clamps which you could afford. You can contact them for smaller adhesive jobs and enlarge them to their full length for bigger projects.

Shop Vice: A store vice installed in the end of the seat is perfect for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. A number of the greater vices offer quick release mechanisms that enabled the user to rapidly open and close the jaws without tedious handle rotation. The wood beamed surfaces on your vice will occasionally need replacement. I would rather use soft walnut in my vices that won’t crush or damage lots of the various woods that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among your most often used tools. Buy a fantastic quality name brand tape measure with a broad tape usually in the 25-foot range. Although in your shop you might not use the tape at these spans, the larger tape steps provide more rigid tapes that won’t flop around and slide off the ending of planks. Assessing when you are by yourself will be a great deal simpler, and of course, quality tape steps can endure for several years.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will need extra sanding. Avoid oversized carpenter’s pencils. Their large flat leads are simply too coarse for precise measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools will assist you in marking the ideal angles as well as compound angles. Also, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find that the Robertson format works best for many woodworking projects and is the most compatible with a drill powered bits. Last, get a set of 12-inch wood files. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and fixing little mistakes on the way.

Adhesives: Not many glues are created equal. Avoid inexpensive house brands marketed as carpenter’s glue. The cost of glue through all your jobs is a minor cost consideration. Therefore, it makes sense to go with the best. I have also found over time that I receive the best results with both indoor and outdoor jobs once I use quality outside grade glue. All these resin-based compounds unlike traditional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Handmade Woodworking Projects

The peaceful gratification of woodworking is a wonderful adventure in this day and age of rushed lives, smartphones, and time-starved livelihood. With a minimal investment at the most basic tools and equipment, anyone can learn the profitable skills of his time-tested avocation and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Making It (TV series)

The show features craftspeople skilled in different mediums competing to be named the "Master Maker" and win $100,000. Each week, competitors make two handmade projects--a "Faster Craft" and a "Master Craft." The winner of each challenge earns a patch. For the Faster Craft, makers have three hours to create an item. For the Master Craft, they have a longer time to create a more elaborate themed collection. At the end of every episode, one person is sent home based on their performance in the Master Craft.[3]

On March 28, 2017, it was announced that NBC had straight-to-series ordered the unscripted "Crafts Competition Reality Series" with the working title, The Handmade Project from Amy Poehler's Paper Kite Productions. It was also announced that it would be hosted by Poehler and Nick Offerman.[2]

Video: Woodworking Projects