Hardwood Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and a few of those attributes alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an instructor and a member of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking when they are after because most of the ideas and jobs Ted’s source are easy to understand and simple. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive bundle, and he ended up making a really’complete’ woodworking resource.

Many might still appear unsure whether they should be purchasing Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it more challenging to make the right choice. There are in fact lots of things that set Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit from Ted’s woodworking Package. Those that are only getting started will discover the thoughts and projects in Ted’s package quite easy. Without doubt, intricate carpentry is demanded; however, they will find it really simple to follow Ted’s simple step by step instructions. Presently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who buy his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource that helps beginners learn a whole lot about woodworking. They will also be able to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers will have the ability to find any job of their choice in this bundle quite easily, though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and people who purchase it will be endorsed by a 60-day guarantee, so if this woodworking bundle fails to satisfy them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long time to down due to its large size. Nonetheless, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are several ideas, plans and projects at Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overwhelmed considering the fact that this package is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking package is so thorough and vast it contains pretty much every woodworking project a woodworker may be considering constructing.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking bundles that can be found throughout the net. Ted has done his best to guide them in every possible way he can, through simple to understand textual instructions, clear pictures and even videos too.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find inside. Therefore, it is certainly worth buying!

The Benefits of Woodworking Hardwood Projects

Woodworking is one hobby that could also be a rewarding career if you like to work with your hands and build exquisite pieces of furniture from timber. When you learn the woodworking crafts and eventually become a nice woodworking craftsman, you’ll be able to construct all kinds of furniture, (beds, table, and chairs), effortlessly. You can then sell your finished woodworking jobs and make a handsome profit. Hardwood Projects.

It requires time to become skilled in the craft of woodworking. The nice thing about working up to that expert craftsman level is you will have the ability to build some really wonderful furniture to you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit in your living space. It will be a subject of conversation whenever you have friends come over to visit. They’ll ask: How did you create it? How long did it take to complete the job? What type of wood did you use? What type of tools did you use? Just how on earth did you make such a beautiful item of furniture? As you discuss your job, a feeling of pride will encounter you and don’t be surprised if your friends ask you to make one for them too!

Starting Your First Woodworking Shop Hardwood Projects

If you’re thinking you are too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it’s ideal for beginners!

Where to begin in Woodworking? Hardwood Projects.

Begin with an idea in your mind of what you want to build then get a excellent woodworking project plan that’s geared toward novices. There are several small woodworking projects for beginners available for purchase from online woodworking retailers. Obviously, you can begin with as expansive a woodworking plan as you pick. However, the chances are if you begin with a little woodworking job initially, you will get a better prospect of keyword finishing the project.

Your woodworking project plan must include some lists! Lists of: woodworking hardware, the amount and variety of wood required, and the required hand tools and power tools to finish the undertaking. Note: A word of caution about purchasing woodworking tools. Just buy what you need to finish your instant or upcoming project. This is important especially if you’re a beginner and just starting out. Tools are not affordable. The newcomer needs good woodworking tools, but it is simple to break the bank buying a great deal of tools you may not utilize all that often. If you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you could afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking straps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and do not overlook that the wood glue and a brush to spread the wood adhesive! Obviously, you’ll need a dry place to work and may require a pair of saw horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of substance and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more woodworking hand tools and more woodworking power tools , but the idea is to buy the crucial hand and power tools that novices will need. You may always add to your toolbox as you gain experience!

Hardwood Projects Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you’ve purchased your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan should provide you step by step directions and techniques to finish your project. However, if you’re not certain about what to do there is help available! There are several areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of the many woodworking magazines available. Every month the authors in woodworking magazines do a story about the best way best to improve your woodworking craft. When it is showing you how you can apply a finish to a completed job, or how to make a mortise and tenon joint, something new could be learned each month. Next, is purchasing instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to work with a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Starting Your First Woodworking Shop Hardwood Projects

If you are a beginner and very enthusiastic about doing a DIY project for house afterward, woodworking could be fun. If you do not have the right information, education, and skill, you might wind up spending more money and time than you originally intended to spend. As a novice woodworker, you want to have space, time and the correct tools. Having said, there are a couple of essential aspects you should remember, before starting with any woodworking project.

1. If you’re just beginning, you must first need to be very interested in woodworking. Creating something new with your hands is a particular feeling. Don’t begin a job if you are not interested, as this may land you at a terrible location.

2. Think of the main reason behind making this woodworking project. Choose the uses of the item you’re making.

3. Consider your abilities and examine the time that you have, before you begin with a project.

4. Start projects which you can complete. If you’re in the midst of a work, then it is wise not to start any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Hardwood Projects

If you keep these essential points in mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires preparation as much as it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to choose the woodworking jobs you wish to begin with. As a beginner, always pick a project that has a very basic build up or a simple construction. A few easy to begin projects include, bird feeder, chairs, shelves, etc.. As soon as you find these techniques, you could always proceed to the next level of woodworking projects, like cabinets, sheds, along with others. Beginning jobs should keyword be less complicated and less bothersome so you have a better knowledge of working with forests and their resources. When the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Hardwood Projects

Tools are the ways whereby you will win the struggle of woodworking. A lot of people believe power tools are needs. However, for novices, basic hand tools can be very handy and more than helpful in completing a project. If woodworking is your hobby, then a few tools that you would require would be:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when mended with vises, provide ample space to work. As a key tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make things much simple for you. When you buy a hammer, constantly check the balance between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool helps you to cut forests at different sizes. There are various sorts of saws out there in the market. Decide on a size which you could deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat kind. Possessing all of them can help you ahead of time woodworking. You can even purchase keyword power screwdrivers as they make the work much quicker.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape gives you the capacity to quantify wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you require a wrench. Nonetheless, this isn’t a tool for novices, but using it might make work easier for you in a subsequent stage.

7. Drill – Drill helps you create holes in wood. Low wattage power drills can make the task much simple.

8. Other small and basic tools – These include pens, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is not any fixed price on woodworking projects. Based on the type of project you want to complete, pricing can be set. The easy the job, the less price it involves. But at the very beginning purchasing the tools will be somewhat hefty. Therefore, it is much better to fix a budget first on the resources, then keyword on the project. Purchasing the fundamental tools will ensure that you don’t need to purchase any more material aside from the timber ply.

Time and Directions

Directions are one of the primary things that each and every newcomer should follow. Instructions guide is very simple to understand the process, what to do and the way to get it done. It keyword is a systematic guide for completing the job. Time also has an important role in the construction of woodworking jobs. Woodworking projects demand time and therefore it is necessary for a novice to have ample amount of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that will make the work easy. But the most essential thing keyword which will allow you to reach success is proper preparation. With appropriate planning and a plan, it’s possible to achieve success quickly. If you know the objective of woodworking, then the thing you want to build, the tools you need in order to possess and the average time you can give daily; then you’re all set to go.

Conclusion, Hardwood Projects

These strategies and education is likely to create the woodworking projects and strategies for beginners fast to complete. Always ensure that you have all of the essential tools, materials, space prepared. Keep the instructions for building an item handy. Proper strategy and preparation will allow you to earn a great woodworking job for your property.

|

Starting Your First Woodworking Shop Hardwood Projects

People if you’re looking for a way to pass time or want an alternate way to make money they generally turn into a hobby they enjoy. It is very exciting to do and everyone can get started.

When doing woodworking in your home there are a lot of jobs one can consider. When starting out you need to be quite cautious when choosing which job to begin with because you will find projects which can be too tough for a beginner. But don’t be concerned about that since we will provide you tips on the right way to start woodworking as a beginner.

The same as any other hobby woodworking requires some working equipment, so before you pick your job you need to know if you have the available tools to work on that job. Try not to invest a lot of money on buying gear when starting out, purchase more equipment as you gain more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no gap between the artistic hand and the hands.

Finding Woodworking Projects and Plans for Beginners Hardwood Projects

Woodworking in your home will provide you time to research different jobs and find out a lot of things. That is why it’s very important to invest less money when starting out so that you can afford to make mistakes and at any time learning about various jobs.
It’s extremely important that you know more about the different types of wood available for making jobs. Anticipate carpenters utilize different types of wood quality for decorating pieces, learning what kind of wood they use can allow you to prepare the wood you will need for certain jobs you might choose to pursue.
Once you know the fundamentals of wood selection and the use of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in building good projects to fulfill your wants.

Hardwood Projects practice makes perfect so be sure that you practice your work daily if at all possible. Try out lots of designs utilizing a variety of tools so that you can find the hang of working with the tools. When starting out you can earn a range of mistakes but with time you will learn how to correctly use them and create quality projects.

|

The Benefits of Woodworking Hardwood Projects

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You may get started on a shoestring with a minimal number of tools and equipment. A little home workshop may generate a broad array of simple projects which can allow you to develop your creative and building abilities while rewarding you with artistic and practical wood products which you can appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let us talk about where you’ll do your woodworking, Depending on the size of your house, you might have the ability to create a dedicated space to your woodworking tasks. This may be a reserved spot on your garage or in your basement. Sometimes, a detached shed or outbuilding may be perfect to prepare your first store. A heated shop detached from your home provides one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably create dust which travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air yields located in the basement draw up dust into the top levels of the home. Another benefit of detached workshops would be, clearly, the sound level. It’s possible to work without bothering the remainder of the household. A good compromise could be the garage of your property.

This might help minimize the problems of dust and noise, however depending on where you live, a keyword garage layout might not be practical during extremes of hot or cold weather.

Finding Woodworking Projects and Plans for Beginners Hardwood Projects

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes they add more space to work in. Hardwood Projects if you can have a dedicated place for a marathon all the greater. Floor tools and bench top gear can remain in position from project to project. If this installation is not impossible, at least try to make a chair area where equipment could be saved and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and gear. At the start, set up a bench area where you are able to shop and use the majority of your gear, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. Add a sturdy shelf beneath the seat to house your hand power tools along with a pegboard above the bench to hang additional equipment. Install a woodworking vice at one end of the seat on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Hardwood Projects

The reach of your startup equipment will be largely based on your budget. Whether you’ve got large financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, purchase your quality tools at the regional building and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or alternative regional advertisements. You will find an abundance of quality lightly used programs out there which belong to individuals who stumbled on that one molding job around the home or received tools as gifts that they will never use. You can usually purchase tools for these sellers for less than half of the original cost and save even more money if you create a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will require extra time and perhaps travel expenses. Weigh the advantages of traveling around town to save a couple added bucks on a inexpensive piece of gear. The extra cost of time and travel in these scenarios is generally justified when purchasing large ticket items such as table saws, bandsaws or high ended tools such as surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal amount of hand gear yet produced sophisticated and intricate pieces. Concentrate on developing your abilities with your start-up set of resources and prevent lamenting about the equipment you wished you’d.
Here is a listing of the useful tools you’ll need to get started:
Safety Gear: Start as anticipated with eye protection. Get a nice pair of safety glasses that also offer some side protection to your eyes. Buy a quality oil set that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually hamper your vision and influence security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up fast. You can avoid wearing them all together in the event that you find them uneasy.

The next piece of crucial safety gear you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking may be long-term and noisy exposure to these noise levels can affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats fatigue.

Most employees tire quicker when subjected to elevated sound levels. Select powerful hearing protection which you find comfortable and effective. Last, wear a cap to keep the dust out of your hair. I prefer a simple ball cap with my ear muffs and eye protection. With this setup I am protecting my eyes and my ears. I’m keeping the dust out of my hair. I am good to go!

Power Hand Saw: Often referred to as a skill saw after the favorite name, this can prove to be the most flexible tool in a startup workshop. In fact, in the hands of a professional, a power hand saw could be used to build an whole property. Eventually, you are going to want to buy a table saw, but for the time being, a power hand saw for the woodworker on a funding empowers him to do cross cuts, rip cuts and even intricate angle cuts. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. These tend to cut back and will burn out before you start your second job. After selecting the right saw put in an excellent blade. Most saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade as a copy and install an excellent blade with carbide teeth. Start with a hybrid . These possess a balanced enamel count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument can’t just cut corners. It is perfect for cutting holes in wood too like manage slots. At some point, you’ll want to obtain a ring saw. Bandsaws are even more flexible but a quality floor unit could be costly. A jigsaw may be a good stop gap for the novice woodworker.

Purchase an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck within the conventional 3/8 inch version. Down the street, the 1/2 inch version will prove to be more versatile. Through tough lessons learned, I have found that buying quality, in this case, is more crucial than ever. Cheaper drills tend to get very short run times and need to be recharged often. Their battery life tends to be bad and to make matters worse keyless chucks come loose and slide frequently. This is one annoyance you do not need on your workshop. Buy an assortment of quality carbide tipped drill bits which are kept in a holder labeling each drill bit size. Make a habit of returning each drill piece to its prospective slot in the holder after every use. Last, get a pair of tough steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer stays as the most flexible tool in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop accidents happen. Even though the most ordinary, hammer injuries are usually of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and features a comfortable handle. Many hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with poor joints between the handle and head. The mind typically comes loose and the tool becomes useless. Select a name brand quality hammer at the 16-ounce range for general work and also a smaller finishing hammer for more intricate work. Avoid using large framing hammers in the workshop and some other with dimpled head tips. These kinds of hammers are more suited for rough framing jobs and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can manage pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking skills evolve, you will likely upgrade to a floor model disc and belt sander. But for now, the ever-versatile palm sander can clean up borders, cross cuts and even limited quantities of surface space. As you embark on your first few projects you’ll discover your palm sander using just a bit of effort can change rough looking inventions into virtual functions of art! You can use your palm sander to sand and form rough boards using 100 grit paper and after finish your work with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets with an excess supply of 100 grit paper. You’ll find that this caliber of paper that the most versatile in your shop.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in concept, these tools allow you to taper edges, flatten high spots and fix any imperfections in timber bits. {Start with a standard amount 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold down your wood bits as you operate on them. Unfortunately, superior clamps are costly and it usually takes the novice woodworker a couple of years to accumulate a detailed set of timber clamps. Begin with a pair of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, but the structure is still the same. Get a pair of the maximum clamps which you could spend. You can get in touch with them for smaller adhesive jobs and enlarge them to their full length for larger projects.

Shop Vice: A shop vice installed in the end of your bench is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood bits without marring or damaging them. A number of the greater vices offer you rapid release mechanisms that enable the user to rapidly open and close the limbs with no dull handle rotation. The wood beamed surfaces on your vice will occasionally need replacement. I would rather use soft pine in my vices that will not crush or damage lots of the various woods that I work with. Whether I’m working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be one of your most frequently used tools. Purchase a fantastic quality name brand tape measure with a broad tape usually in the 25-foot range. Although in your shop you may not be using the tape in these lengths, the larger tape steps provide more rigid tapes which will not flop around and slide off the ending of planks. Assessing when you are by yourself will be a lot simpler, and of course, quality tape measures can last for many years.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber.

What is Woodworking? The Benefits of Woodworking Hardwood Projects

Woodworking is known as the building or the production of objects from wood. You can create a great deal of unique objects from woodworking and these objects can be as large as gazebos or as little as wooden toys. No matter how big or small your private project maybe you’ll be very likely to accomplish that aim with woodworking. Additionally, woodworking has lots of private in addition to psychological benefits! In the following guide, I will briefly identify some of the benefits for youpersonally.

Woodworking as a Career:

People who build things from wood are usually known keyword as carpenters. Carpenters can operate on a variety of woodworking jobs and job types. For example, a few carpenters own their carpentry business and these individuals have the luxury to place their job hours. This advantage enables carpenters the chance to spend additional time with their own families and also have less job stress. Raising children is a very tough task regardless of what way you approach the endeavor! To get a carpenter who possesses their own company, this task might not be hard since that person will have more time to become part of her or his child’s lifetime. By playing a larger part in the life of your child you’ll be having a larger impact on the sort of character that child develops into, which is a massive concern for any loving parent. Besides such benefits, carpentry can also have health benefits as well.

The Benefits of Woodworking Hardwood Projects

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood around a whole lot. This causes more physical activity, which results in better physical health. Maintaining your body physically healthy is really important and keyword can assist in preventing the occurrence of various ailments in the foreseeable future life. By being physically healthy you can decrease chances that you will have a heart attack, have seizures, turned into a diabetic, and reduce the odds of having a range of other disorders.

Hardwood Projects, Do It Yourself Woodworking Saves Cash:

I feel like I paid way too far when I visit home improvement shops and purchase patio furniture, and I am sure that I’m not the only person that has felt this way! A successful business owner once told me to constantly raise the sales price of a product to double what you got it for. In this manner, you can always reduce the merchandise to 50 percent away and still come out without acquiring any losses. This seems like it may be the same strategy that home improvement stores use in selling their wooden furniture solutions. Regardless, there’s a way that it is possible to get around paying the additional money and that’s to do with building it yourself. Fortunately, there are several really good woodworking products that offer thousands of detailed woodworking keyword plans for hundreds of different project types. So, you can really build whatever you want or see in any home improvement store. Doing something does require a bit of time but the time is well spent when you end up saving hundreds of dollars as a result of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Wood flooring

Wood flooring is any product manufactured from timber that is designed for use as flooring, either structural or aesthetic. Wood is a common choice as a flooring material and can come in various styles, colors, cuts, and species. Bamboo flooring is often considered a form of wood flooring, although it is made from a grass (bamboo) rather than a timber.[1]

Solid hardwood floors are made of planks milled from a single piece of timber. Solid hardwood floors were originally used for structural purposes, being installed perpendicular to the wooden support beams of a building known as joists or bearers. With the increased use of concrete as a subfloor in some parts of the world, engineered wood flooring has gained some popularity. However, solid wood floors are still common and popular. Solid wood floors have a thicker wear surface and can be sanded and finished more times than an engineered wood floor.[2] It is not uncommon for homes in New England, Eastern Canada, USA, and Europe to have the original solid wood floor still in use today.

Solid wood flooring is milled from a single piece of timber that is kiln or air dried before sawing. Depending on the desired look of the floor, the timber can be cut in three ways: flat-sawn, quarter-sawn, and rift-sawn. The timber is cut to the desired dimensions and either packed unfinished for a site-finished installation or finished at the factory. The moisture content at time of manufacturing is carefully controlled to ensure the product does not warp during transport and storage.

Video: Woodworking Tools