Holiday Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes along with a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, she’s also an instructor and a member of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking whenever they’re after because most of the ideas and jobs Ted’s source are simple to comprehend and easy. Ted McGrath spent two years researching so he could collect enough material for a comprehensive bundle, and he ended up making a truly’complete’ woodworking resource.

Many may still appear unsure whether they need to be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it more challenging to make the ideal choice. There are in fact lots of things that place Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit out of Ted’s woodworking Package. Those that are only getting started will find the thoughts and projects in Ted’s package quite simple. No doubt, intricate carpentry is involved; however, they will discover that it’s really easy to follow Ted’s simple step by step instructions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source that will help beginners learn a whole lot about woodworking. They will also have the ability to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers will have the ability to find any project of their choice in this package quite easily, even though there so many options.

60-Day Iron Clad Money Back Guarantee

In general, this product is and people who buy it will be endorsed by a 60-day guarantee, so if this woodworking package fails to meet them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large size. Yet, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are several ideas, plans and projects at Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast that it contains pretty much every woodworking project a woodworker might be interested in building.

This woodworking bundle created by Ted McGrath is really unmatchable and can’t be compared to those other woodworking packages that are available throughout the internet. Ted has done his very best to guide them in every conceivable way he could, through simple to understand textual instructions, clear images and even movies as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking projects they will find inside. Therefore, it is definitely worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Holiday Woodworking Plans

Woodworking is 1 hobby that can also be a rewarding profession if you love to work with your hands and build beautiful pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a nice woodworking craftsman, you will be able to construct all types of furniture, (beds, table, and chairs), effortlessly. After that you can sell your finished woodworking projects and make a handsome profit. Holiday Woodworking Plans.

It takes time to become skilled at the craft of woodworking. The wonderful thing about working up to that expert craftsman level is you will have the ability to create some really nice furniture for you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit in your living space. It will be a subject of conversation whenever you have friends come over to visit. They will ask: How did you create it? Where did you get the woodworking programs? Just how long did it take to finish the project? What kind of wood did you use? What kind of tools did you use? How on earth did you create such a gorgeous piece of furniture? As you speak about your job, a feeling of pride will encounter you and also don’t be surprised if your friends ask you to create one for them too!

How to Become a Master Woodworker From Your Own Home Holiday Woodworking Plans

If you’re thinking you are just too old or too young for woodworking, think again! You’re never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to Begin in Woodworking? Holiday Woodworking Plans.

Begin with an idea in your mind of what you want to build then get a excellent woodworking project plan that’s geared toward novices. There are several little woodworking projects for novices available for sale from online woodworking merchants. A few woodworking program suggestions for you believing are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child just to name a couple. Obviously, you can start out with as expansive a woodworking plan as you pick. However, the chances are if you begin with a small woodworking job initially, you’ll have a better chance of keyword completing the job.

Your woodworking project plan should include some lists! Lists of: woodworking hardware, the quantity and variety of wood required, and the essential hand tools and power tools to finish the undertaking. Note: A word of warning about buying woodworking tools. Only buy what you need to finish your immediate or upcoming project. This is important especially if you’re a beginner and just beginning. Tools aren’t cheap. The newcomer needs good woodworking tools, but you can easily break the bank buying a lot of tools you may not use all that frequently. If you do buy gear, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking clamps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also don’t overlook the wood glue and a brush to spread the wood adhesive! Obviously, you’ll need a dry place to work and may need a pair of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more woodworking hand tools and much more woodworking power tools , but the concept is to buy the essential hand and power tools that beginners will need. You can always add to your toolbox as you get experience!

Holiday Woodworking Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you have bought your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. But if you are unsure about what to do there is help available! There are lots of areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of the many woodworking magazines available. Each month the writers in woodworking magazines do a story about the best way to improve your woodworking craft. When it is showing you how to apply a finish to a finished job, or how to create a mortise and tenon joint, something new can be heard each month. Next, is buying instructional DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to use a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Holiday Woodworking Plans

If you are a beginner and very enthusiastic about doing a DIY job for house then, woodworking can be fun. If you don’t have the proper information, instruction, and ability, you might land up spending more time and money than you originally meant to spend. As a novice woodworker, you want to have time and the correct tools. Having mentioned, there are a few essential factors you should keep in mind, before starting with any woodworking project.

1. If you are just beginning, you should first have to be somewhat interested in woodworking. Creating something new with your own hands is a particular sense. Do not start a project if you’re not interested, as this may land you at a terrible place.

2. Think of the primary reason for making this woodworking project. Decide on the uses of the item you’re making.

3. Consider your abilities and examine the time that you have, until you begin with a job.

4. Start jobs that you can finish. If you are in the middle of a work, then it is better to not start any project in any way.

Finding Woodworking Projects and Plans for Beginners Holiday Woodworking Plans

If you keep these essential things in your mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires planning as much as it takes effort. So how do you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to choose the woodworking projects you want to start with. As a beginner, always select a job that has a very basic build up or a simple structure. A few easy to start projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find the techniques, you can always proceed to the next level of woodworking jobs, like cabinets, sheds, along with others. Beginning projects should keyword be complicated and less bothersome so you have a better comprehension of working with woods and their tools. When the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Holiday Woodworking Plans

Tools would be the means through which you can win the struggle of woodworking. Many men and women believe power tools are requires. However, for novices, basic hand tools can be very handy and more than helpful in completing a job. If woodworking is the hobby, then a few tools that you would demand are:

1. Workbench – A workbench is required for precise cuts and measurements. The workbench, when mended with vises, provide ample space to work. As a primary tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer will make things much simple for you. When you buy a hammer, always check the equilibrium between the weight and endure. Always select a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool can help you to cut woods at different sizes. There are various sorts of saws out there in the marketplace. Choose a size which you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian types and standard flat type. Having all of them will help you in advance woodworking. You can also purchase keyword energy screwdrivers since they make the job much quicker.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape gives you the capacity to measure wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you demand a wrench. Nonetheless, this isn’t a tool for beginners, but using it would make work easier for you at a later stage.

7. Drill – Drill helps you create holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the job much easy.

8. Other small and fundamental tools – These include pens, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is not any fixed price on woodworking projects. Based on the type of job you want to complete, pricing could be determined. The easy the job, the less price it involves. However, at the beginning buying the tools will probably be somewhat hefty. Therefore, it is much better to fix a budget on the resources, then keyword on the project. Buying the basic tools will ensure that you do not have to buy any more material aside from the timber ply.

Time and Directions

Directions are one of the principal things which each and every beginner should follow. Instructions manual is very simple to comprehend the process, what to do and the way to do it. It keyword is a systematic guide for finishing the project. Time also has a significant part in the building of woodworking projects. Woodworking projects require time and therefore it’s necessary for a beginner to have ample quantity of time weekly.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. Nevertheless, the most essential thing keyword which will allow you to achieve success is proper preparation. With proper planning and a plan, it’s possible to achieve success quickly. If you know the purpose of woodworking, then the thing you need to build, the resources you require to own and the typical time you can give daily; then you are ready to go.

Conclusion, Holiday Woodworking Plans

These tips and education is likely to create the woodworking projects and strategies for novices fast to complete. Always make sure that you have all of the essential tools, materials, area ready. Keep the instructions for building an item handy. Proper strategy and preparation can help you to make a fantastic woodworking job for your home.

|

The Benefits of Woodworking Holiday Woodworking Plans

People if you’re looking for a way to pass time or want an alternate way to make money they generally turn to a hobby that they enjoy. Woodworking is one of the hobbies individuals turn to perform as a hobby or home based business. It is very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you have to be quite careful when choosing which job to begin with since there are jobs that can be too difficult for a newbie. But do not worry about that since we are going to give you tips on the right way to start woodworking as a beginner.

Just like any other hobby woodworking requires some working equipment, therefore before you pick your job you need to be aware of whether you’ve got the available tools to work on such a job. Try not to invest a lot of cash on buying gear when starting out, buy more gear as you get more experience and become an expert carpenter. Should you enjoy your hobby then there will not be any difference between the hand and the hands.

Starting Your First Woodworking Shop Holiday Woodworking Plans

Woodworking in your home will provide you time to research unique jobs and learn so many things. That is why it’s very important to invest less money when starting out so you can afford to make errors and at any time learning about different jobs.
It’s extremely important that you know more about different kinds of wood available for making projects. Expect carpenters utilize different kinds of wood quality for decorating bits, learning what kind of wood they use will allow you to prepare the wood you’ll need for specific jobs you may choose to pursue.
As soon as you know the basics of wood choice and the usage of different tools now you can employ them in cutting well wood pieces and placing wood together. Knowing what to do can assist you in creating good projects to satisfy your needs.

Holiday Woodworking Plans practice makes perfect so be sure that you practice your work daily if possible. Try out a lot of designs using various tools so you may find the hang of working with the tools. When starting out you may earn a range of mistakes but with time you will learn how to correctly utilize them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Holiday Woodworking Plans

Woodworking as a hobby can be one of the most rewarding experiences you will ever appreciate. You can begin on a shoestring with a minimal amount of gear and equipment. A little home workshop can generate a broad array of simple projects that can allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products that you are able to enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let us talk about where you’ll perform your woodworking, Depending on the size of your house, you may be able to produce a dedicated space to your woodworking tasks. This may be a reserved place on your garage or on your cellar. Sometimes, a detached shed or outbuilding might be ideal to set up your first store. A heated store detached from your house provides one distinct advantage: better dust control. Without sophisticated dust control systems, basement assignments will inevitably produce dust that travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air yields located in the cellar draw dust up into the upper levels of the house. Another benefit of detached workshops would be, clearly, the sound level. It’s possible to work without disturbing the rest of the family. A fantastic compromise might be the garage of your property.

This might help minimize the difficulties of dust and sound, however based on where you live, a keyword garage layout might not be sensible during extremes of cold or hot weather.

Starting Your First Woodworking Shop Holiday Woodworking Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes they include more space to work in. Holiday Woodworking Plans if you’re able to have a dedicated spot for a workshop all the better. Floor gear and bench top equipment can stay in position from project to project. If this installation isn’t impossible, at least try to create a bench area where equipment can be stored and pulled out as necessary. If possible plan for inevitable growth as you get more tools and equipment. At the start, set up a seat area where you are able to shop and use the majority of your equipment, with a temporary expansion of your activities onto the basement or garage floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. This will enable you to work comfortably while standing. Add a sturdy shelf beneath the seat to home your hand power tools along with a pegboard above the bench to hang additional equipment. Install a woodworking vice at one end of your bench on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Holiday Woodworking Plans

The scope of your startup equipment will be mostly based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring always buy quality gear. If you can afford it, then buy your quality tools at the regional construction and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other local advertisements. There are an abundance of quality lightly used tools out there which belong to individuals who embarked on that 1 molding job around the home or obtained tools as presents which they will never use. You can usually buy tools for these sellers for under half of the initial cost and save even more money if you make a package deal for all their unused equipment. Of course, getting tools from private individuals will take additional time and possibly travel expenditures. Weigh the advantages of traveling around town to save a couple extra dollars on a cheap piece of gear. The excess cost of travel and time in these scenarios is generally justified when purchasing large ticket items such as table saws, bandsaws or large finished tools such as surface planers later on.
For smaller acquisitions, a trip to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimal quantity of hand gear yet produced sophisticated and intricate pieces. Concentrate on developing your skills with your start-up set of resources and prevent lamenting about the gear you wished you’d.
Here is a listing of the more useful tools You Will Need to get started:
Safety Gear: Start as expected by eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Purchase a quality acrylic collection that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will gradually impair your vision and affect safety. Avoid wearing goggles at a workshop. Most impair vision and dust up fast. You can avoid wearing all of them together if you find them uncomfortable.

The next piece of critical safety gear that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking may be long-term and noisy exposure to those noise levels may affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire quicker when exposed to elevated noise levels. These can contain earplugs or complete ear keyword muff protectors. I find that a quality set of ear muff guards is perfect for hearing protection.

Lastly, wear a cap to keep the dust from your hair. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often known as a skill saw after the popular brand name, this can prove to be the most flexible instrument in a startup workshop. In reality, in the hands of a professional, a power hand saw can be used to construct an entire property. As mentioned before get an excellent brand saw. Stay away from cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your second project. After selecting the right saw put in an excellent blade. Most skill saws come with a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade as a backup and install a quality blade with carbide teeth. Begin with a hybrid blade. These have a balanced tooth count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument can’t just cut curves. It is ideal for cutting holes in wood too like handle slots. Eventually, you’ll want to get a band saw. Bandsaws are much more flexible but a quality floor unit could be expensive. A jigsaw may be a good stop gap to the novice woodworker.

Purchase an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck within the conventional 3/8 inch model. Through tough lessons learned, I have discovered that purchasing quality, in this scenario, is much more crucial than ever. Cheaper drills tend to have very short run times and have to be recharged often. Their long-term battery life will be bad and to make matters worse keyless chucks come loose and slip often. This is one annoyance you do not need on your workshop. Purchase an assortment of superior carbide tipped drill bits which are stored in a holder labeling each drill bit size. Make a habit of returning each drill bit to its prospective slot in the holder after every use. Lastly, get a set of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile instrument in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents occur. Even though the most frequent, hammer injuries are usually of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high tech range offer ceramic or metal handles. Cheaper hammers generally have wood grips with inferior joints between the head and handle. The head typically comes loose and the instrument becomes useless. Select a name brand quality hammer in the 16-ounce scope for overall work and also a smaller completing hammer for more complex work. Avoid using big framing hammers at the workshop and any with dimpled mind tips. These kinds of hammers are more appropriate for rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can manage just about any sanding requirements you’ve got as a novice woodworker. As your woodworking skills evolve, you’ll likely update to a floor version disc and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface space. As you embark on the first few projects you might discover that your palm sander with a bit of effort can transform rough looking creations into virtual works of art! You can use your palm sander to sand and form rough planks using 100 grit paper and after finish your job with 200 or 300 grit paper. Buy an assortment of sandpaper sheets using an extra source of 100 grit paper. You’ll find that this caliber of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Though low tech in concept, these tools allow you to taper edges, flatten high spots and fix any imperfections in timber bits. {Start with a standard number 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold down your wood bits as you operate on them. Unfortunately, superior clamps are costly and it usually takes the novice woodworker a few years to accumulate a comprehensive set of wood clamps. Begin with a set of long”pipe” clamps. Today the pipe has been replaced with long steel shafts, but the structure is still the same. Receive a pair of the maximum clamps that you can spend. You may contact them for smaller glue jobs and expand them to their full length for larger jobs.

Shop Vice: A store vice installed in the end of the bench is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their wood clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the better vices offer you quick release mechanisms that enabled the consumer to rapidly open and close the limbs without tedious handle rotation. The timber clamping surfaces in your vice will periodically need replacement. I would rather utilize soft pine in my vices that won’t crush or damage many of the different forests that I utilize. Whether I am working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be one of the most often used tools. Buy a good quality name brand tape measure with a wide tape usually from the 25-foot range. Although in your store you may not be using the tape at these spans, the bigger tape steps provide more rigid tapes that won’t flop around and slide off the ending of boards. Assessing when you are by yourself will be a great deal easier, and naturally, quality tape steps can endure for many decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will need extra sanding. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Additional Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools will help you in marking the right angles as well as chemical angles. Additionally, get an range of flat, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find that the Robertson format works best for many woodworking projects and is the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood files. The cost of glue through all of your jobs is a minor cost consideration. For that reason, it makes sense to go with the best. I have also discovered over time that I receive the best results with both indoor and outdoor jobs once I use quality outside grade adhesive. These resin-based compounds unlike conventional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Holiday Woodworking Plans

The peaceful satisfaction of woodworking is an excellent experience in this era of hurried lives, smart phones, and time-starved careers. With a minimal investment in the most rudimentary equipment and tools, everyone can learn the profitable abilities of his time-tested hobby and enjoy job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Summer vacation

Summer vacation (also called summer holiday or summer break) is a school holiday in summer between school years and the break in the school academic year. Students and teaching staff are typically off between eight and nine weeks, depending on the country and district. In the United States, summer break is approximately 2.5 to 3 months, with students typically getting out of school between late-May and mid-June and starting the new school year between mid-August and early-September. In the Republic of Ireland, Italy, Greece, Lithuania, Latvia, Lebanon, Romania and Russia, the summer break is normally three months, compared to six to eight weeks in Australia, the United Kingdom, Canada, Pakistan, India, Denmark, the Netherlands, and Germany.

In some countries, school summer vacation is only six weeks or two months supposedly so students do not forget large amounts of information learned in the past year (See: Summer learning loss).[1][2] Other education reformers believed that children were overstimulated in a system which required 48 weeks of schooling. They believe that over-schooling could lead to nervous disorders, depression, insanity, and separation anxiety towards families.[3] They believe that children need the 2–3 months off to relax and also to take a break from other childhood stresses associated with school such as peer pressure, cliques, bullying, and the pressure of heavy loads of homework.

Some critics of summer vacation point out that American students spend approximately 180 days (26 weeks) per year in school, but Asian students are "in school for 240 to 250 days".[citation needed] This is consistent with the conclusions of researchers who suggest that advanced abilities are in proportion to the time spent learning. Summer holidays in Japan start from late-July until early-September.[4]

Video: Woodworking Projects